Why I did it
DHCPv6 Relay information will be stored in DHCP_RELAY table instead of VLAN table in the future.
How I did it
Change dhcp_relay docker files to parse through DHCP_RELAY to check for dhcpv6 status
How to verify it
Build dhcp_relay docker and check all dhcp_relay and dhcpmon are running properly
Which release branch to backport (provide reason below if selected)
* Add DHCPv6 minigraph parsing support
Co-authored-by: shlomibitton <60430976+shlomibitton@users.noreply.github.com>
Logrotate for wtmp and btmp files to fix size getting too large. (#8744)
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
[201811][utilities][swss][snmpagent] advance sub module head
snmpagent
* 187aa10 2021-09-16 | [201811][RFC1213]: Initialize lag oid map in reinit_data (#233) (github/201811) [SuvarnaMeenakshi]
swss:
* 3503705 2021-09-05 | [201811][Cherry-pick] [acl mirror action] Mirror session ref count fix at acl rule attachment (#1898) (HEAD -> 201811, github/201811) [bingwang-ms]
utilities:
* f3f8667 2021-10-15 | [201811] disk_check.py: Allow remote user access when disk is read-only (#1873) (HEAD -> 201811, github/201811) [Renuka Manavalan]
* 6b351c9 2021-10-14 | [201811] Remove exec from platform_reboot_plugin call to handle any hang issue. (#1880) [Sujin Kang]
* d8d0461 2021-07-29 | [minigraph][port_config] Consume port_config.json while reloading minigraph (#1726) [Blueve]
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
[201811] Invoke disk check periodically (#8951)
* Invoke disk check periodically. (#7374)
Why I did it
Helps with periodic scan of disk for RO state.
If found, this script makes transient fix and raise error message.
Save DB dump after warm/fast reboot (#8913)
Back porting the master branch change - #8803
Save the redis DB dump after warm reboot.
[201811][swss] advance swss submodule head (#9049)
* e0b115a 2021-10-22 | [copp] add dhcpv6 copp rules (#1979) (HEAD -> 201811, github/201811) [Ying Xie]
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
[swssconfig] load dhcpv6 copp rules by default (#9047)
Why I did it
Need to enable DHCPv6 copp rule
How I did it
Add a separate DHCPv6 copp rule config file and load it during cold reboot.
How to verify it
cold reboot, and verify config being loaded and dhcpv6 rules got installed.
Signed-off-by: Ying Xie ying.xie@microsoft.com
[warmboot finalizer] load dhcpv6 copp rules when missing (#9048)
Why I did it
Need to enable DHCPv6 COPP rules.
How I did it
Load the separate DHCPv6 COPP rules after warm reboot if the rules are missing.
How to verify it
Warm reboot from an image doesn't have DHCPv6 COPP rules installed.
Warm reboot from an image have DHCPv6 COPP rules already installed.
In either case, the script did the right thing and only install the COPP rules if it is missing.
Signed-off-by: Ying Xie ying.xie@microsoft.com
Why I did it
Need to enable DHCPv6 copp rule
How I did it
Add a separate DHCPv6 copp rule config file and load it during cold reboot.
How to verify it
cold reboot, and verify config being loaded and dhcpv6 rules got installed.
Signed-off-by: Ying Xie ying.xie@microsoft.com
* Support readonly vtysh for sudoers (#7383)
Why I did it
Support readonly version of the command vtysh
How I did it
Check if the command starting with "show", and verify only contains single command in script.
* Fix the type issue in rvtysh
Recent changes brought l2 vlan concept which does not have DHCP
clients behind them and so DHCP relay is not required. Also,
dhcpmon fails to launch on those vlans as their interfaces
lack IP addresses. This PR backposts #6527 that limits launch
of both DHCP relay and dhcpmon to L3 vlans only.
original-pr: #6527
singed-off-by: Tamer Ahmed tamer.ahmed@microsoft.com
* [build] Fix the snmp docker build error. (#7452)
Issue is get_pip.py is moved to pip 21.1 (https://github.com/pypa/get-pip/commits/main) which is not compatible with 3.6.
Issue of pip itself is fixed as part of 21.1.1 in pip community (pypa/pip#9835).
However get-pip.py is still not updated to latest pip. Also get.pip.py does not support python 3.6 version explicitly (pypa/get-pip#88)
Step 15/29 : RUN curl https://bootstrap.pypa.io/get-pip.py | python3.6
---> Running in bece31f49267
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 1891k 100 1891k 0 0 9564k 0 --:--:-- --:--:-- --:--:-- 9600k
Traceback (most recent call last):
File "<stdin>", line 24298, in <module>
File "<stdin>", line 139, in main
File "<stdin>", line 115, in bootstrap
File "<stdin>", line 96, in monkeypatch_for_cert
File "/tmp/tmp5fnxrz0a/pip.zip/pip/_internal/commands/__init__.py", line 9, in <module>
File "/tmp/tmp5fnxrz0a/pip.zip/pip/_internal/cli/base_command.py", line 12, in <module>
File "/tmp/tmp5fnxrz0a/pip.zip/pip/_internal/cli/cmdoptions.py", line 30, in <module>
File "/tmp/tmp5fnxrz0a/pip.zip/pip/_internal/utils/hashes.py", line 2, in <module>
ImportError: cannot import name 'NoReturn'
The command '/bin/sh -c curl https://bootstrap.pypa.io/get-pip.py | python3.6' returned a non-zero code: 1
How I did:
Got the file from https://github.com/pypa/get-pip/tree/21.0 and added to the buildimage
pin pip to the previous release 21.0.1. (Similar is done in other public repos eg: grpc/grpc-java#8115)
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
With the release of pip21.0 (https://pypi.org/project/pip/#history) on branch
201811 stretch build is failing with below error logs:
As per https://pypi.org/project/pip/ pip21.0 does not not support python2
from Jan 2021. To fix this tag the pip to 20.3.3 version which was being used last
and is working fine.
Signed-off-by: Guohan Lu <lguohan@gmail.com>
Printing both snapshot and current counter sets will make it easier to pinpoint
which message type(s) is/are not being relayed. This PR prints both counter sets.
Also, this PR defines gnu11 as a C standard to compile with in order to avoid
making changes when porting to 201811 branch.
singed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
When BGP routes are missing, DHCP packets get relayed over mgmt
interface. This results in dhcpmon alerting that DHCP packets are
not being relayed. This is PR include mgmt interface as uplink
device, and so, if DHCP packet gets relayed over mgmt interface,
regular dhcpmon alert will not be issues. Instead, dhcpmon will
check the mgmt interface counts and issue a separate alert regarding
packets travelling through mgmt network.
In addition, this PR includes the following enhancements:
1. Add SIGUSR1 handler that prints out current packet counts
2. Increase alert grace window to 3 minutes from currently 2 minutes
3. Time is now computed more accurately
4. Print vlan name before counters
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
When BGP routes are missing, DHCP packets get relayed over mgmt
interface. This results in dhcpmon alerting that DHCP packets are
not being relayed. This is PR include mgmt interface as uplink
device, and so, if DHCP packet gets relayed over mgmt interface,
regular dhcpmon alert will not be issues. Instead, dhcpmon will
check the mgmt interface counts and issue a separate alert regarding
packets travelling through mgmt network.
In addition, this PR includes the following enhancements:
1. Add SIGUSR1 handler that prints out current packet counts
2. Increase alert grace window to 3 minutes from currently 2 minutes
3. Time is now computed more accurately
4. Print vlan name before counters
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
Fix an error which causes bgpcfgd crash on invalid ip address. Before the fix we had an issue here. When either loopback ipv4 or ipv6 addresses were already set and bgpcfgd received another "SET" message for already set ip loopback address, bgpcfgd will send syslog message about ambiguous ip address (despite the fact that the address is good) and crash of bgpcfgd. With this change this behavior is changed: if we receive ip address and this ip address is already set, bgpcfgd will send this message to the syslog and return from the handler.
FDB/ARP/Default routes files are deleted after swssconfig. This
makes debugging/validation of device conversion hard. This PR
saves those files in order to facilitate debugging of device conversion.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
* [bgpcfgd]: Generate set src configuration dynamically
Sometimes zebra starts faster then swss configures Loopback0
In this case "set src" inside of the route map will not be
inserted to the configuration because zebra doesn't see Loopback
ips in the list of available ip addresses.
I've added extra logic to push the "set src" configuration only
when Loopback has been configured by swss.
Increased netlink socket receive buffer size for zebra. Otherwise we receive following messages sometimes:
zebra[60]: netlink-listen recvmsg overrun: No buffer space available
Before the fix:
lldpcli configure ports Ethernet96 lldp portidsubtype local 'Eth1/1' description 50G|sonic1|Eth1/3/2
bash: sonic1: command not found
bash: Eth1/3/2: No such file or directory
After fix:
lldpcli configure ports Ethernet96 lldp portidsubtype local 'Eth1/1' description '50G|sonic1|Eth1/3/2'
run successfully.
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
* [dhcp-relay]: Add DHCP Relay Monitor (#3886)
DHCP relay MONitor (dhcpmon) keeps track of DORA messages. If DHCP Relay
is detected to be not forwarding DORA message, dhcpmon will log such event
to syslog. Under the hood dhcpmon keeps counts of clients DR messages,
forwarded DR messages, DHCP server OA messages, and forwarded OA messages.
dhcpmon will check every 12 sec (configurable) if counts are monotonically
increasing and record snapshot of those counters. dhcpmon will report
discrepancies when detected between current counters and snapshot counters.
pull-request: https://github.com/Azure/sonic-buildimage/pull/3886
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
* Eliminate dependency on libexplain
* Remove dependency on libexplain
* Add a monit config file for teamd container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* Add a copy mechanism to put the monit config file in teamd container
into base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* Add a monit config file for snmp container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* Add a copy mechanism to put the monit config file of snmp container into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* Add a monit config file for dhcp_relay container in the dir
base_image_files.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* Add a copy mechanism to put the monit config file of dhcp_relay
container into base image under /etc/monit/conf.d.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* Add a monit config file for router advertiser container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* Add a copy mechanism to put the monit config file of router advertiser
contianer into base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-Pmon] Add a monit config file for pmon container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-Pmon] Add a copy mechanism to put the monit config file into the
base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-lldp] Add a monit config file for lldp container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-lldp] Add a copy mechanism to put the monit config file into the
base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-bgp] Add a monit config file for BGP container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-bgp] Add a copy mechanism to put monit config file into the base
image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-swss] Add a monit config file for the swss container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-swss] Add a copy mechanism to put monit config file into the
base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a monit config file for syncd container on barefoot
platform.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit config file into
the base image on barefoot.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a monit config file for syncd container on broadcom.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit config file into
the base image on broadcom.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a monit config file for syncd container on cavium.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit config file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-centec] Add a monit config file for syncd container on centen
platform.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit config file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a monit config file for syncd container on centen
platform.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit config file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a monit config file for syncd container on marvell.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit conifg file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a monit config file for syncd container on
marvell-arm64.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit config file into
the base image on marvell-arm64.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a monit config file for syncd container on
marvell-armhf.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit config file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a monit config file for syncd container on mellanox.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit config file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a monit config file for syncd container on nephos.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit config file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-sflow] Add a monit config file for sflow container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-sflow] Add a copy mechanism to put the monit conifg file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-telemetry] Add a monit config file for telemetry container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-telemetry] Add a copy mechanism to put the monit config file
into the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-database] Add a monit config file for database container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-database] Add a copy mechanism to put the monit config file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-Dhcprelay] Change a typo.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-Dhcprelay] Change the process name in monit config file to
dhcrelay.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] There is no desserve process in syncd container on
barefoot.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] There is no process desserve in syncd container on
cavium.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] There is no process named desserve in syncd on centec.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] There is no process named desserve in syncd on marvell.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Should not delete the process desserve in syncd container
on marvell.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Delete the process dsserve in syncd on marvell.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Delete the process dsserve in syncd container on
marvell-arm64.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Delete the process dsserve in syncd container on
marvell-armhf.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Delete the process dsserve in syncd container on
mellanox.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-Radv] Change the process name to radvd.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-telemetry] Correct a typo in monit_telemetry.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-teamd] Delete the monit config file for teamd.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-teamd] Delete the mechanism to copy the monit config file into
base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-dhcprelay] Delete the monit config file for dhcp_relay
container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-dhcprelay] Delete the mechanism to copy the monit config file
into the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-radv] Delete the monit config file foe radv container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-radv] Delete the mechanism to copy the monit config file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-bgp] change the monit config file for BGP container such that
monit only generates alert if the process is not running for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-snmp] Change the monit config file for snmp container such that
monit only generates alret if the process is not running for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-pmon] Change the monit config file for pmon container such that
monit only generates alert if the processes are not running for 5
minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-lldp] Change the monit config file for lldp container such that
monit only generates alerts if some processes are not running for 5
minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-pmon] Delete the monit config file for pmon container since some
of processes are not running depended on the type of box.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-pmon] Delete the copy mechanism to copy the monit config file
into the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-lldp] Change the matching name for the process lldpd.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-swss] Change the monit config file for swss container such that
monit only generates alerts if the processes are not running for 5
minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Change the monit config file for syncd container on
barefoot such that monit only generates alerts if the process is not
running for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Correct a typo in monit config file.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Change the monit config file for syncd container on
broadcom such that monit only generates alerts if the processes are not
running for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Change the monit config file for syncd container on
cavium such that monit only generates alerts if the process is not
running for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Change the monit config file for syncd container such
that monit only generates alerts if the process is not running for 5
minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Change the monit config file for syncd container on
marvell such that monit only generates alerts if the process is not
running for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Change the monit config file for syncd container on
marvell-arm64 such that monit only generates alerts if the process is
not running for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Change the monit config file for syncd container on
marvell-armhf such that monit will generate alert if the process is not
running for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Change the monit config file for syncd container on
mellanox such that monit only generates alerts if the process is not
running for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-sycnd] Change the monit config file for syncd container such
that monit only generates alerts if the processes are not running for 5
minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-sflow] Change the monit config file for sflow container such
that monit only generates alerts if the process is not running for 5
minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-telemetry] Change the monit config file for telemetry container
such that monit only generates alerts if the processes are not running
for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-database] Change the monit config file for database container
such that monit only generates alerts if the process is not running for
5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-database] Use 4 spaces to replace 2 spaces in monit config file.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-bgp] Use 4 spcess to replace 2 spaces in monit config file.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-lldp] Use 4 spaces to replace 2 spaces in monit config file.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-swss] Use 4 spaces to replace 2 space in monit config file.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-sflow] Use 4 spaces to replace 2 spaces in monit config file.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-snmp] Use 4 spaces to replace 2 spaces in monit config file.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-telemetry] Use 4 spaces to replace 2 spaces in monit config
file.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file
on barefoot.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file
on broadcom.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file
on cavium.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file
on centec.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file
on marvell.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file
on mellanox.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Use 4 spaces to repalce 2 spaces in the monit config file
on nephos.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-bgp] Remove the trailing extra spaces in monit config file.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* BGPm for 201811 (#3601)
* Feature is downported
* Add monitors to the test minigraphs
* Test
* No pfx filer
* Fix bgp sample
* Quagga requires to activate peer-group before configuration
* Add bgpcfgd and bgpd.peer template
* Catch exception if rendering external template
* Fix tests
* Feature is downported
* Add monitors to the test minigraphs
* Test
* No pfx filer
* Fix bgp sample
* Quagga requires to activate peer-group before configuration
