We noticed in tests/production that there is a low probability failure
where /etc/hosts could have some garbage characters before the entry for
local host name. The consequence is that all sudo command would be very
slow. In extreme cases it would prevent some services from starting
properly.
I suspect that the /etc/hosts file might be opened by some process causing
the issue. Editing contents with new file level and replace the whole file
should be safer.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
[Makefile] Kill arm march docker service before every run to avoid stale entries
[Platform] Marvell - add dtb deb pkg
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
Now it's possible to add and remove peers based on ConfigDB
- What I did
Fixed functionality for dynamically adding/removing static bgp peers.
- How I did it
Split the bgp default template on bgp part and bgp peer part
Changed bgpcfgd to use 1.
- How to verify it
Build an image and run on your DUT
Somehow this was missed in april, I added the icons for 201904 so that
the branch is not forgotten
Signed-off-by: Michel Moriniaux <m.moriniaux@criteo.com>
The following changes are done as part of this commit:
- Adding the system reboot handler
- Adding swizzle reset case for the reboot reason
- Workaround for the boot problem from Golden bios
- Adding the logging messages for platform scripts
- EEPROM parsing and library routines
Sonic-swss-common:
aaa8133 - 2019-10-12 : Add VRF object table in state_db (#312) [Tyler Li]
91aceb1 - 2019-10-11 : [schema] Update schema to support debug counters (#308) [Danny Allen]
9bcd5ca - 2019-09-28 : [multi-DB] fix vs test, should NOT replace old DBConnector API with new DBConnector API since vs test docker has no database_config.josn (#311) [Dong Zhang]
599155a - 2019-09-25 : [multi-DB] Part 2: C++ interface API changes / swsscommon unit test / LOGLEVEL_DB apply new API (#301) [Dong Zhang]
379ac73 - 2019-09-20 : add bulkremove for consumer_table_pops.lua (#306) [Dong Zhang]
6b805d3 - 2019-09-19 : timerfd return 0 with errno =0 - handle as False alarm. (#302) [Renuka Manavalan]
e455891 - 2019-09-03 : Add VLAN_SUB_INTERFACE in CONFIG_DB schema (#284) [Wenda Ni]
Sonic-swss
731a8f5 - 2019-10-17 : [copporch]: fix the endless loop problem when removing copp table group. (#1038) [wangshengjun]
1623219 - 2019-10-14 : Enable C++ unit test during build (#1092) [Qi Luo]
629c9d3 - 2019-10-14 : [vstest]: Revert back to 2 sec, and check if we got more than expected number of syslogs (#1091) [Prince Sunny]
80b2ace - 2019-10-11 : sonic-swss/orchagent: Add new protocol trap name support (#1087) [jpxjlrldgit]
9f765f7 - 2019-10-11 : [aclorch]: Check for existing mirror table only when creating a new table (#1089) [Danny Allen]
4c10260 - 2019-10-11 : [vstest]: Update Route test to check for added entry (#1088) [Prince Sunny]
e658b64 - 2019-10-11 : [chassisorch]: Add everflow feature for chassis (#1024) [Ze Gan]
5b13387 - 2019-10-10 : [changelog]: Revert changelog that was done for passing VS test. (#1080) [Prince Sunny]
90a690d - 2019-10-10 : [aclorch]: Simplify the TCP flags matching code and support exact value match (#1072) [Shuotian Cheng]
3461710 - 2019-10-09 : Single VRF for ingress and egress flows, skip route replication (#1045) [Prince Sunny]
953474a - 2019-10-03 : [swss]: Do not use namespace in header files (#1081) [Wenda Ni]
bd36751 - 2019-10-03 : Change nexthop key to ip & ifname (#977) [tylerlinp]
fee1aaa - 2019-10-02 : [teamsyncd]: Check if LAG exists before removing (#1069) [Shuotian Cheng]
175f3de - 2019-09-30 : Update ECMP NHopGroup for Port Channel oper down (#1030) [Sumukha Tumkur Vani]
182940d - 2019-09-26 : [mirrororch]: Remove mirror session state after it is remvoed (#1066) [Shuotian Cheng]
d823dd1 - 2019-09-20 : [MirrorOrch]: Mirror Session Retention across Warm Reboot (#1054) [Shuotian Cheng]
a5b6e7c - 2019-09-19 : Ignore link local neighbors (#1065) [Prince Sunny]
0ddaba3 - 2019-09-19 : Adopt to signature change of Selectable::readData, which switched (#1061) [Renuka Manavalan]
543bd98 - 2019-09-18 : [aclorch]: Fix table name in counter table for mirror rules (#1060) [Shuotian Cheng]
12c29b4 - 2019-09-19 : Cannot ping to link-local ipv6 interface address of the switch. (#774) [Kiran Kumar Kella]
4d8e08d - 2019-09-18 : change in fpmsyncd to skip the lookup for the Master device name if the route object table value is zero (#1048) [Arvindsrinivasan Lakshmi narasimhan]
da514f5 - 2019-09-18 : Do not update lag mtu from teamsyncd (netlink) (#1053) [Prince Sunny]
3fb22e1 - 2019-09-16 : Check warmboot flag during initialization (#1057) [Prince Sunny]
d98d1e9 - 2019-09-16 : [aclorch]: Egress mirror action support and action ASIC support check (#963) [Stepan Blyshchak]
313ef5c - 2019-09-09 : Warmboot Vlan neigh restore fix (#1040) [Prince Sunny]
5841e06 - 2019-09-06 : Add dot1p to tc mapping support (#871) [Wenda Ni]
39fe568 - 2019-08-30 : [aclorch]: Revise ACL rule creation/removal logs (#1042) [Shuotian Cheng]
c461911 - 2019-08-27 : [copporch]: Fix the typo - mld_v1_done (#1037) [wangshengjun]
34915de - 2019-08-22 : [portsyncd]: Add default catch block in portsyncd (#1033) [SuvarnaMeenakshi]
dc81a21 - 2019-08-20 : [vnet]: Fix FDB related failure in "vnet_bitmap" virtual switch test (#1034) [Volodymyr Samotiy]
5ae4226 - 2019-08-19 : [test]: Adjust stale timer for warm-reboot neighborsync test cases (#1031) [zhenggen-xu]
65cbd55 - 2019-08-16 : [build]: Fix compiling warnings using ARM 32 bit compiler (#1015) [arheneus@marvell.com]
b611808 - 2019-08-16 : [Orchagent]: Fixbug segmentfault at routeorch (#1025) [Ze Gan]
[submodule]: update sonic-sairedis
1f4a1d7 2019-09-24 | Add warm boot support with removed/created port (#515) (HEAD, origin/master, origin/HEAD) [Kamil Cudnik]
59e530a 2019-09-20 | Add support for debug counters (#517) [Danny Allen]
1ed09e0 2019-09-20 | fully support bulk_remove in sairedis (#516) [Dong Zhang]
6cb1b31 2019-09-17 | Add support for port remove and port create (no warm boot) (#500) [Kamil Cudnik]
83d86ed 2019-09-17 | Fix c_str() in printf for string (#514) [Kamil Cudnik]
11b44b5 2019-09-16 | Advance SAI reference pointer to v1.5.0 (#509) [Wenda Ni]
38c6945 2019-09-14 | support sflow on virtual switch (#498) [Rakesh Datta]
e7d766e 2019-09-09 | Add acl counter match logic based on acl entry field (#511) [Kamil Cudnik]
58845ce 2019-09-06 | Add extra check for warm boot discovered RIDs (#502) [Kamil Cudnik]
b4893ef 2019-09-05 | [flex counter]: Lower the severity of log during rif counter support check (#504) [shikenghua]
b859344 2019-09-03 | fix found typo in new added syncMode related codes (#506) [Dong Zhang]
also update broadcom and mellanox SAI
* Update minigraph.py to filter out front-panel ports that are not active
* Update cfggen tests to reflect new behavior
Signed-off-by: Danny Allen <daall@microsoft.com>
* Incorporate PR comments
- Update t0 tests to include additional device neighbors
- Refactor xml parsing logic
1. IPv6 host and subnet anycast route in VRF to be configured with nhop (#… 5786674
2. Unregister_netdev VRF obsreved and kernel hangs during vrf delete (#109) 5dbf6d5
3. [mellanox] Extend size of QSFP EEPROM for the cable type SSF8436 and … feb42b0
Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com>
* [FRR]: Patch for kernel level graceful restart.
Original Patch in FRR master:
https://github.com/FRRouting/frr/pull/4301
* Rename 0007-zebra-kernel-level-graceful-restart.patch to 0008-zebra-kernel-level-graceful-restart.patch
Author: sudhanshukumar22 <sudhanshu.kumar@broadcom.com>
Date: Tue Oct 16 12:33:20 2019 -0700
39c93f379a
If we have a case where have created a fd for i/o and we have removed the
handling thread but still have the fd in the poll data structure, there
existed a case where we would get the handle this fd return from poll but we
would immediately do nothing with it because we didn't have a thread to hand
the event to.
This leads to an infinite loop. Prevent the infinite loop
from happening and log the problem.
Signed-off-by: Preetham Singh (preetham.singh@broadcom.com)
Author: sudhanshukumar22 <sudhanshu.kumar@broadcom.com>
Date: Tue Oct 15 02:31:20 2019 -0700
lib: changes for making snmp socket non-blocking
Description: The changes have been done to make the snmp socket
non-blocking before calling snmp_read()
FRR Pull request: https://github.com/FRRouting/frr/pull/5134
Problem Description/Summary :
vtysh hangs on first try to enter after a reboot with BGP dynamic peers
Expected Behavior :
VTYSH should not hang.
When we debug more into bgpd docker by doing gdb on its threads, we find the below thread of bgpd, which is causing the issue.
Thread 1 (Thread 0x7f1e1ec46d40 (LWP 47)):
0x00007f1e1d762593 in recvfrom () from /lib/x86_64-linux-gnu/libpthread.so.0
0x00007f1e1aadd09b in netsnmp_tcpbase_recv () from /usr/lib/x86_64-linux-gnu/libnetsnmp.so.30
0x00007f1e1aad9617 in netsnmp_transport_recv () from /usr/lib/x86_64-linux-gnu/libnetsnmp.so.30
0x00007f1e1aab2c07 in _sess_read () from /usr/lib/x86_64-linux-gnu/libnetsnmp.so.30
0x00007f1e1aab3a29 in snmp_sess_read2 () from /usr/lib/x86_64-linux-gnu/libnetsnmp.so.30
0x00007f1e1aab3a7b in snmp_read2 () from /usr/lib/x86_64-linux-gnu/libnetsnmp.so.30
0x00007f1e1aab3acf in snmp_read () from /usr/lib/x86_64-linux-gnu/libnetsnmp.so.30
0x00007f1e1b44d7ec in agentx_read (t=0x7fffa75f0080) at lib/agentx.c:63
0x00007f1e1e7d6451 in thread_call (thread=0x7fffa75f0080) at lib/thread.c:1620
0x00007f1e1e770699 in frr_run (master=0x559396ea60f0) at lib/libfrr.c:1011
0x0000559395b4d953 in main (argc=5, argv=0x7fffa75f02b8) at bgpd/bgp_main.c:492
(gdb) bt
0x00007f830c89d210 in __read_nocancel () from /lib/x86_64-linux-gnu/libpthread.so.0
0x000056450e1e8238 in vtysh_client_run (vclient=0x56450e4a8b40 <vtysh_client+24768>, line=0x56450e21add0 enable, callback=0x0, cbarg=0x0) at vtysh/vtysh.c:216
0x000056450e1e8c6b in vtysh_client_run_all (head_client=0x56450e4a8b40 <vtysh_client+24768>, line=0x56450e21add0 enable, continue_on_err=0, callback=0x0, cbarg=0x0) at vtysh/vtysh.c:356
0x000056450e1e8ddb in vtysh_client_execute (head_client=0x56450e4a8b40 <vtysh_client+24768>, line=0x56450e21add0 enable) at vtysh/vtysh.c:393
0x000056450e1e9c82 in vtysh_execute_func (line=0x56450e21add0 enable, pager=0) at vtysh/vtysh.c:598
0x000056450e1e9dee in vtysh_execute_no_pager (line=0x56450e21add0 enable) at vtysh/vtysh.c:619
0x000056450e1f7d48 in vtysh_read_file (confp=0x56451000a9d0, top_cfg=1) at vtysh/vtysh_config.c:494
0x000056450e1f7ef2 in vtysh_read_config (config_default_dir=0x56450e4edc20 <frr_config> /etc/frr/frr.conf, top_cfg=1) at vtysh/vtysh_config.c:522
0x000056450e1e5de4 in vtysh_apply_top_level_config () at vtysh/vtysh_main.c:301
0x000056450e1e7842 in main (argc=2, argv=0x7ffc81e6f598, env=0x7ffc81e6f5b0) at vtysh/vtysh_main.c:692
The fix has been taken from the following link.
https://sourceforge.net/p/net-snmp/patches/1348/
* [sonic_platform]remove the handling of reset_sw_reset which indicates rebooted by software.
* [sonic_platform]Check "reset_sw_reset"
Also check reboot cause file "reset_sw_reset" which indicates the system was rebooted due to software requesting.
The owner of the generated files (/etc/frr/*.conf) by start.sh is root if it is a new file.
This will cause error when executing "copy running-config startup-config" in vtysh because of privilege issue.
* [FRR]: Use stg in a proper way.
Signed-off-by: wangshengjun <wangshengjun@asterfusion.com>
* [FRR]restore the detach status for frr submodule after finish patching
Signed-off-by: wangshengjun <wangshengjun@asterfusion.com>
* [FRR]use the 'FRR_VERSION' exported from 'rule/frr.mk'.
Signed-off-by: wangshengjun <wangshengjun@asterfusion.com>
