- Why I did it
Add NVIDIA Copyright header to NVIDIA files added lately
- How I did it
Add NVIDIA Copyright header for the relevant files
- How to verify it
N/A (only commented text was added).
Normally doesn't need to measure i2c calls.
Also switched to use timespec64_sub() to ensure time delta normalized
Co-authored-by: Kostiantyn Yarovyi <kostiantynx.yarovyi@intel.com>
- Why I did it
Mellanox syncd container will be based on Debian iproute2 plus patches instead of Nvidia internal version of iproute2
- How I did it
Download iproute2 from Debian repository, apply patches and compile to create a new target.
The target is then deployed in syncd container of Mellanox switches only.
The new target is called IPROUTE2_MLNX.
- How to verify it
Compile and load on switch, verify interfaces network devices created successfully.
Verify LLDP shows connections to neighbors.
Verify ping between 2 hosts over 2 router ports is successful.
Why I did it
Update sonic-platform submodule for Nokia-7250IXRE Platform. This requires the new NDK 22.9.8 and above
How I did it
Update submodule sonic-platform for Nokia-7250IXRE platform.
c9f316e Disparate process and thread-safe protection for MDIPC transport, and refactored presence logic to better align with SfpStateUpdateTask operation
a3486cc Added _get_module_bulk_info() and cache the info for 5 seconds to optimize the chassisd update.
4b2e729 Fixed the nokia_cmd show qfpga help display
7b87049 Fixed the nokia_cmd show midplane helper dispaly.
83eabea Add "nokia_cmd set ndk-monitor-action" and "nokia_cmd set ndk-log-level" commands
8aad7de Add nokia_cmd show ndk-version
d2c55e3 Modify the psu.py and module.py to optimize the psud running time
Signed-off-by: mlok <marty.lok@nokia.com>
Signed-off-by: Stepan Blyschak stepanb@nvidia.com
DEPENDS: #12852
Why I did it
To support BGP pending FIB suppression.
How I did it
I backported patches from FRR 8.4 feature that allows communicating ASIC route status back to FRR.
Also, added a new field in DEVICE_METADATA YANG model table. Added UT for YANG model changes.
How to verify it
Run on the switch.
- Why I did it
Package Marvell/Innovium CLI shell.
- How I did it
Include shell packages.
- How to verify it
Platform specific shell commands.
Signed-off-by: rck-innovium rck@innovium.com
- Why I did it
Facilitate Automatic integration of new hw-mgmt version into SONiC.
Inputs to the Script:
MLNX_HW_MANAGEMENT_VERSION Eg: 7.0040.5202
CREATE_BRANCH: (y|n) Creates a branch instead of a commit (optional, default: n)
BRANCH_SONIC: Only relevant when CREATE_BRANCH is y. Default: master.
Note: These should be provided through SONIC_OVERRIDE_BUILD_VARS parameter
Output:
Script creates a commit (in each of sonic-buildimage, sonic-linux-kernel) with all the changes required for upgrading the hw-management version to a version provided by MLNX_HW_MANAGEMENT_VERSION
Brief Summary of the changes made:
MLNX_HW_MANAGEMENT_VERSION flag in the hw-management.mk file
hw-mgmt submodule is updated to the corresponding version
Updates are made to non-upstream-patches/patches and series.patch file
series, kconfig-inclusion and kconfig-exclusion files can be updated in the sonic-linux-kernel repo
sonic-linux-kernel/patches folder is updated with the corresponding upstream patches
Based on the inputs, there could be a branch seen in the local for each of the repo's. Branch is named as <branch>_<parent_commit>_integrate_<hw_mgmt_version>
- How I did it
Added a new make target which can be invoked by calling make integrate-mlnx-hw-mgmt
user@server:/sonic-buildimage$ git rev-parse --abbrev-ref HEAD
master_23193446a_integrate_7.0020.5052
user@server:/sonic-buildimage$ git log --oneline -n 2
f66e01867 (HEAD -> master_23193446a_integrate_V.7.0020.5052, show) Intgerate HW-MGMT V.7.0020.5052 Changes
23193446a (master_intg_hw_mgmt) Update logic
user@server:/sonic-buildimage/src/sonic-linux-kernel$ git rev-parse --abbrev-ref HEAD
master_6847319_integrate_7.0020.4104
user@server:/sonic-buildimage/src/sonic-linux-kernel$ git log --oneline -n 2
6094f71 (HEAD -> master_6847319_integrate_V.7.0020.5052) Intgerate HW-MGMT V.7.0020.5052 Changes
6847319 (origin/master, origin/HEAD) Read ID register for optoe1 to find pageable bit in optoe driver (#308)
Changes made will be summarized under sonic-buildimage/integrate-mlnx-hw-mgmt_user.out file. Debugging and troubleshooting output is written to sonic-buildimage/integrate-mlnx-hw-mgmt.log files
User output file & stdout file:
log_files.tar.gz
Limitations:
Assumes the changes would only work for amd64
Assumes the non-upstream patches in mellanox only belong to hw-mgmt
- How to verify it
Build the Kernel
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
Why I did it
Support to add SONiC OS Version in device info.
It will be used to display the version info in the SONiC command "show version". The version is used to do the FIPS certification. We do not do the FIPS certification on a specific release, but on the SONiC OS Version.
SONiC Software Version: SONiC.master-13812.218661-7d94c0c28
SONiC OS Version: 11
Distribution: Debian 11.6
Kernel: 5.10.0-18-2-amd64
How I did it
- Why I did it
Currently, non upstream patches are applied only after upstream patches.
Depends on sonic-net/sonic-linux-kernel#313. Can be merged in any order, preferably together
- What I did it
Non upstream Patches that reside in the sonic repo will not be saved in a tar file bur rather in a folder pointed out by EXTERNAL_KERNEL_PATCH_LOC. This is to make changes to the non upstream patches easily traceable.
The build variable name is also updated to INCLUDE_EXTERNAL_PATCHES
Files/folders expected under EXTERNAL_KERNEL_PATCH_LOC
EXTERNAL_KERNEL_PATCH_LOC/
├──── patches/
├── 0001-xxxxx.patch
├── 0001-yyyyyyyy.patch
├── .............
├──── series.patch
series.patch should contain a diff that is applied on the sonic-linux-kernel/patch/series file. The diff should include all the non-upstream patches.
How to verify it
Build the Kernel and verified if all the patches are applied properly
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
[S6100] Improve S6100 serial-getty monitor, wait and re-check when getty not running to avoid false alert.
#### Why I did it
On S6100, the serial-getty service some time can't auto-restart by systemd. So there is a monit unit to check serial-getty service status and restart it.
However, this monit will report false alert, because in most case when serial-getty not running, systemd can restart it successfully.
To avoid the false alert, improve the monitor to wait and re-check.
Steps to reproduce this issue:
1. User login to device via console, and keep the connection.
2. User login to device via SSH, check the serial-getty@ttyS1.service service, it's running.
3. Run 'monit reload' from SSH connection.
4. Check syslog 1 minutes later, there will be false alert: ' 'serial-getty' process is not running'
#### How I did it
Add check-getty.sh script to recheck again later when getty service not running.
And update monit unit to check serial-getty service status with this script to avoid false alert.
#### How to verify it
Pass all UT.
Manually check fixed code work correctly:
```
admin@***:~$ sudo systemctl stop serial-getty@ttyS1.service
admin@***:~$ sudo /usr/local/bin/check-getty.sh
admin@***:~$ echo $?
1
admin@***:~$ sudo systemctl status serial-getty@ttyS1.service
● serial-getty@ttyS1.service - Serial Getty on ttyS1
Loaded: loaded (/lib/systemd/system/serial-getty@.service; enabled-runtime; vendor preset: enabled)
Active: inactive (dead) since Tue 2023-03-28 07:15:21 UTC; 1min 13s ago
admin@***:~$ sudo /usr/local/bin/check-getty.sh
admin@***:~$ echo $?
0
admin@***:~$ sudo systemctl status serial-getty@ttyS1.service
● serial-getty@ttyS1.service - Serial Getty on ttyS1
Loaded: loaded (/lib/systemd/system/serial-getty@.service; enabled-runtime; vendor preset: enabled)
```
syslog:
```
Mar 28 07:10:37.597458 *** INFO systemd[1]: serial-getty@ttyS1.service: Succeeded.
Mar 28 07:12:43.010550 *** ERR monit[593]: 'serial-getty' status failed (1) -- no output
Mar 28 07:12:43.010744 *** INFO monit[593]: 'serial-getty' trying to restart
Mar 28 07:12:43.010846 *** INFO monit[593]: 'serial-getty' stop: '/bin/systemctl stop serial-getty@ttyS1.service'
Mar 28 07:12:43.132172 *** INFO monit[593]: 'serial-getty' start: '/bin/systemctl start serial-getty@ttyS1.service'
Mar 28 07:13:43.286276 *** INFO monit[593]: 'serial-getty' status succeeded (0) -- no output
```
#### Description for the changelog
[S6100] Improve S6100 serial-getty monitor.
#### Ensure to add label/tag for the feature raised. example - PR#2174 under sonic-utilities repo. where, Generic Config and Update feature has been labelled as GCU.
Why I did it
After sonic-install install a new image, print_menu is set echo without any data. No image info between Hit any key to stop autoboot: 0 and Start USB
Board configuration detected:
Net:
| port | Interface | PHY address |
|--------|-----------|--------------|
No ethernet found.
Hit any key to stop autoboot: 0
(Re)start USB...
USB0: Port (usbActive) : 0 Interface (usbType = 2) : USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
How I did it
The fw_setenv print_menu is missing the double quotes. That causes the value is truncated. Using double quotes to in the environment setting.
How to verify it
Install new image with this fix. And reboot the system. The following section should be shown:
Signed-off-by: mlok <marty.lok@nokia.com>
Why I did it
Add platform files for critical processes and default qos config for Innovium platforms
How I did it
Added default files for critical processes and qos config
How to verify it
Tested with autorestart/test_container_autorestart.py::test_containers_autorestart
Signed-off-by: rck-innovium rck@innovium.com
Why I did it
Fix the installation candidate not found issue when building docker-sonic-vs
How I did it
Need to run the command "apt-get update" to update the mirror indexes before installing the package gnupg
How to verify it
Why I did it
There is rare condition, emc2305 hold SMBus and cause SMBus completion wait timed out.
How I did it
Enable EMC2305 SMBus timeout feature, 30ms period of inactivity will reset the interface.
How to verify it
Use 'i2cget -y -f 23 0x4d 0x20 b' to read EMC2305 configuration register and check DIS_TO bit not set.
Signed-off-by: Eric Zhu <erzhu@celestica.com>
* Upgrade docker-sonic-vs and docker-syncd-vs to Bullseye
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* iproute2: Force a new version and timestamp to be used for the package
There is an issue with Docker's overlay2 storage driver when not using
native diffs (and thus falling back to naive diff mode), which is the
case in the CI builds. The way the naive diff mode detects changes is by
comparing the file size and comparing the timestamps (specifically, I
believe it's the modification timestamp), and if there's a change there,
then it's considered a change that needs to be recorded as part of that
layer.
The problem is that with the code being added in the patch, the file
size remains the same, and the timestamp of binary files appear to be
the same timestamp as the changelog entry (likely for reproducible build
purposes). The file size remains the same likely due to extra padding
within the file introduced by relro. Because of this, Docker doesn't
detect this file has changed, and doesn't save the new file as part of
this layer.
To work around this, create a new changelog entry (with a new version as
well) with a new timestamp. This will result in the binary files having
a different timestamp, and thus will get saved by Docker as part of that
layer.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
---------
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
- Why I did it
Sometimes Nvidia watchdog device isn't ready when watchdog-control service is up after first installation from ONIE
need to delay watchdog control service to go up after hw-mgmt which gets devices up and ready
- How I did it
Delay Nvidia watchdog-control service before hw-mgmt has started on Mellanox platform in order to avoid missing or not ready watchdog device.
- How to verify it
verification test of ONIE installation of image in a loop
making sure watchdog service is always up (not failed) after first installation from ONIE
Why I did it
To enhance pddf_eeprom.py to use caching and fix#13835
How I did it
Utilising the in-built caching mechanism in the base class eeprom_base.py.
Adding a cache file to store the eeprom data.
How to verify it
By running 'decode-syseeprom' or 'show platform syseeprom' commands.
Why I did it
To enable FPGA support in PDDF.
How I did it
Added FPGAI2C and FPGAPCI in the build path for the PDDF debian package
Added the support for FPGA access APIs in the drivers of fan, xcvr, led etc.
Added the FPGA device creation support in PDDF utils and parsers
How to verify it
These changes can be verified on some platform using such FPGAs. For testing purpose, we took Dell S5232f platform and brought it up using PDDF. In doing so, FPGA devices are created using PDDF and optics eeproms were accessed using common FPGA drivers. Below are some of the logs.
- Why I did it
To include latest fixes:
Fix traffic loss on all routed traffic when moving from 4.4.3372/XX_2008_3388 to 4.5.4118-012/XX_2010_4120-010. Issue occurred after ISSU process in Spectrum 1 only, When upgrading from older version to a new one. Neighbor entries are overwritten.
Fix When using mirror session policer on SPC2/3, the actual CIR was 1.28 times more than the configured CIR value.
Fix Creation of router interface of type bridge may occasionally fail if create is performed immediately after delete.
Fix False errors during SDK deinitialization may be seen in the syslog
- How I did it
Updated SDK submodule and relevant makefiles with the required versions.
- How to verify it
Build an image and run tests from "sonic-mgmt".
Why I did it
Upgrade SAI XGS version to 8.4.0.2 and migrate to DMZ repo.
How I did it
Update SAI XGS version in sai.mk.
How to verify it
Run the SONiC and SAI test with the SAI pipeline.
Signed-off-by: zitingguo-ms zitingguo@microsoft.com
- Why I did it
In sfplpm API, the number of logical ports is hardcoded as 64. When a system contains more port than this, the SDK APIs would fail with a syslog as below
Mar 7 03:53:58.105980 r-leopard-58 ERR syncd#SDK: [MGMT_LIB.ERR] Slot [0] Module [0] has logport [0x00010069] in enabled state
Mar 7 03:53:58.105980 r-leopard-58 ERR syncd#SDK: [SDK_MGMT_LIB.ERR] Failed in __sdk_mgmt_phy_module_pwr_attr_set, error: Internal Error
Mar 7 03:53:58.106118 r-leopard-58 ERR pmon#-c: Error occurred when setting power mode for SFP module 0, slot 0, error code 1
- How I did it
Remove the hardcoded value of 64. Obtained the number of logical ports from SDK
- How to verify it
Manual testing
Fixes#13568
Upgrade from old image always requires squashfs mount to get the next image FW binary. This can be avoided if we put FW binary under platform directory which is easily accessible after installation:
admin@r-spider-05:~$ ls /host/image-fw-new-loc.0-dirty-20230208.193534/platform/fw-SPC.mfa
/host/image-fw-new-loc.0-dirty-20230208.193534/platform/fw-SPC.mfa
admin@r-spider-05:~$ ls -al /tmp/image-fw-new-loc.0-dirty-20230208.193534-fs/etc/mlnx/fw-SPC.mfa
lrwxrwxrwx 1 root root 66 Feb 8 17:57 /tmp/image-fw-new-loc.0-dirty-20230208.193534-fs/etc/mlnx/fw-SPC.mfa -> /host/image-fw-new-loc.0-dirty-20230208.193534/platform/fw-SPC.mfa
- Why I did it
202211 and above uses different squashfs compression type that 201911 kernel can not handle. Therefore, we avoid mounting squashfs altogether with this change.
- How I did it
Place FW binary under /host/image-/platform/mlnx/, soft links in /etc/mlnx are created to avoid breaking existing scripts/automation.
/etc/mlnx/fw-SPCX.mfa is a soft link always pointing to the FW that should be used in current image
mlnx-fw-upgrade.sh is updated to prefer /host/image-/platform/mlnx location and fallback to /etc/mlnx in squashfs in case new location does not exist. This is necessary to do image downgrade.
- How to verify it
Upgrade from 201911 to master
master to 201911 downgrade
master -> master reboot
ONIE -> master boot (First FW burn)
Which release branch to backport (provide reason below if selected)
- Why I did it
To optimize Mellanox platform build
- How I did it
sdk debs are now downloaded as Spectrum-SDK-Drivers-SONiC-Bins release
sx kernel is downloaded as zip from Spectrum-SDK-Drivers
- How to verify it
configure/build for Mellanox platform
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
Why I did it
Platform cases test_tx_disable, test_tx_disable_channel, test_power_override failed in dx010.
How I did it
Add i2c access algorithm for CPLD i2c adapters.
How to verify it
Verify it with platform_tests/api/test_sfp.py::TestSfpApi test cases.
- Why I did it
FW for Spectrum-4 ASIC not yet available
- How I did it
Remove in Mellanox fw make files to Spectrum-4 ASIC firmware binaries.
Remove from firmware upgrade scripts to be able Spectrum-4 ASIC.
- How to verify it
Run regression test
d768d19 Remove warning msg when a transceiver op takes > 200ms
7451689 Support the module.py in IMM to query the Supervisor card eeprom info
Signed-off-by: mlok <marty.lok@nokia.com>
- Why I did it
On Mellanox platform, system EEPROM is a soft link provided by hw-management. There is chance that config-setup service accessing the EEPROM before hw-management creating it. It causes errors. The PR is aim to fix it.
- How I did it
Waiting EEPROM creation in platform API up to 10 seconds.
- How to verify it
Manual test
- Why I did it
Add support for systems 4600/4600C/2201 that are using sonic interface names aligned to 4 instead of 8 (which is the max number of lanes per port).
Improve DB access calls, now we use Python library functions.
- How I did it
Use addition information taken from Config DB in order to create map from SDK logical index to sonic interface name.
- How to verify it
Run ECMP calculator on 4600, 4600C and 2201 platforms.
- Why I did it
sfp_event.py gets a PMPE message when a cable event is available. In PMPE message, there is no label port available. Current sfp_event.py is using sx_api_port_device_get to get 64 logical ports attributes, and find the label port from those 64 attributes. However, if there are more than 64 ports, sfp_event.py might not be able to find the label port and drop the PMPE message.
- How I did it
Don't use hardcoded 64, get logical port number instead.
- How to verify it
Manual test
- Why I did it
Add PYTHON3_SWSSCOMMON as build time dependency to Mellanox platform API to avoid issue like:
19:34:11 ImportError while loading conftest '/sonic/platform/mellanox/mlnx-platform-api/tests/conftest.py'.
19:34:11 tests/conftest.py:28: in <module>
19:34:11 from sonic_platform import utils
19:34:11 sonic_platform/__init__.py:18: in <module>
19:34:11 from sonic_platform import *
19:34:11 sonic_platform/platform.py:28: in <module>
19:34:11 raise ImportError(str(e) + "- required module not found")
19:34:11 E ImportError: No module named 'swsscommon'- required module not found- required module not found
19:34:11 [ FAIL LOG END ] [ target/python-wheels/bullseye/mlnx_platform_api-1.0-py3-none-any.whl ]
The issue only happens when calling below command:
make target/python-wheels/bullseye/mlnx_platform_api-1.0-py3-none-any.whl
- How I did it
Add PYTHON3_SWSSCOMMON as build time dependency to Mellanox platform API
- How to verify it
Run build
- Why I did it
Add non-upstream kernel patches for the Nvidia platforms
These patches are not yet upstream but needed for new technology.
A flow to upstream them is in progress and once they will be approved they will be moved officially to sonic-linux-kernel.
Till then to include them in the build (not must) the build option INCLUDE_EXTERNAL_PATCH_TAR=y should be included
- How I did it
Zip all the patches in to a tar.gz tarball.
- How to verify it
Manually test
Signed-off-by: Stephen Sun <stephens@nvidia.com>
add SEU reporting on chassis
fix fallback logic for Clearlake eeprom identification
fix fan speed reporting for a specific model
move pcie timeout configuration for Upperlake in platform code (deprecates hwsku-init)
- Why I did it
Currently, when building MFT, it can only download the source code from the official download site: http://www.mellanox.com/downloads/MFT/, it's not possible to integrate an internal version that has not been officially released yet.
The intention of this PR is to make it possible to download the source code from any valid link.
- How I did it
Add a new parameter "MLNX_MFT_INTERNAL_SOURCE_BASE_URL", if an URL is given, it will download the source code from the given URL, otherwise, it downloads from the default official site.
- How to verify it
Specify a valid URL in the make file, the MFT debs should be built successfully.
Signed-off-by: Kebo Liu <kebol@nvidia.com>
- Why I did it
Support per PSU slope value for PSU power threshold according to hardware team requirement
- How I did it
Pass the PSU number as a parameter when fetching the slope value of PSU.
- How to verify it
Running regression and manual test
Signed-off-by: Stephen Sun <stephens@nvidia.com>
- Why I did it
Commit sonic-net/sonic-platform-daemons@153ea47 changed SfpStateUpdateTask from Process to Thread. In this commit, it raises an exception in SfpStateUpdateTask to make shutdown flow fast. But it does not work on Nvidia platform as Nvidia platform is passing timeout parameter of get_change_event to select. Linux select function can not be interrupted by a Python exception. There is no such issue on Nvidia platform before that commit. However, in order to comply with the commit and make shutdown flow fast, we decided to change Nvidia platform API implementation.
To fix issue #13591.
- How I did it
The select call in get_change_event should use no more than 1 second as timeout parameter.
Outside the select call, add a while loop to make sure timeout parameter of get_change_event work as expected
- How to verify it
Manual test
- Why I did it
Advance hw-mgmt service to V.7.0020.4100
Add missing thermal sensors that are supported by hw-mgmt package
Delay system health service before hw-mgmt has started on Mellanox platform in order to avoid reading some sensors before ready.
Depends on sonic-net/sonic-linux-kernel#305
- How I did it
1. Update hw mgmt version
2. Add missing sensors
3. Delay service
- How to verify it
Regression test.
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Why I did it
High CPU utilization by entropy.py
How I did it
Remove entropy script as it does not work anymore and is no longer needed for bullseye(202205).
In Buster(202012) the max available poolsize (entropy_avail) for entropy is 4096 and our entropy.py script was based on this value. With the change in kernel to bullseye on 202205 this entropy poolsize was changed to 256 which also causes our script to fail.
This script was initially added to provide SW assistance to improve the system entropy value available early on in the Sonic boot sequence on buster.
On bullseye (Linux kernel 5.10) this is no longer needed as this feature has been improved.
How to verify it
run "top" command to check CPU usage.
Why I did it
Command "sudo sfputil show error-status -hw" shows "OK (Not implemented)" in the output.
How I did it
Add a new SFP API get_error_description support in Nokia sonic-platform sfp.py module.
How to verify it
Run the new image and execute command "sudo sfputil show error-status -hw"
Why I did it
Some of the platform vendors use FPGA in the HW design. This FPGA is connected to the CPU via PCIe interface. This FPGA also works as an I2C controller having other devices attached to the I2C channels emanating from it. Adding a common module, a driver and a platform specific algorithm module to be used for such FPGA in PDDF.
How I did it
Added 'pddf_fpgapci_module', 'pddf_fpgapci_driver' and a sample algorithm module for Xilinx device 7021. Kernel modules which takes the platform dependent data from PDDF JSON files and initialises the PCIe FPGA. The sample algorithm module can be used by the ODMs in case the communication algorithms are same for their device. Else, they need to come up with similar algo module.
How to verify it
Any platform having such an FPGA and brought up using PDDF would use these kernel modules. The detail representation of such a device in PDDF JSON file is covered in the HLD.
Why I did it
Sometime, SIGTERM processing by psud takes more then default 10sec (please see stopwaitsecs in http://supervisord.org/configuration.html).
Due to this, the following two testcases may fail:
test_pmon_psud_stop_and_start_status
test_pmon_psud_term_and_start_status
How I did it
Update PSU plugin to process sigterm signal so that psud runs faster to end last cycle in time
How to verify it
Run SONiC CTs:
test_pmon_psud_stop_and_start_status
test_pmon_psud_term_and_start_status
Why I did it
dplane_fpm_nl is a new FPM implementation in FRR. The old plugin fpm will not have any new features implemented. Usage of the new plugin gives us ability to use BGP suppression feature and next hop groups in the future.
How I did it
Switch to dplane_fpm_nl zebra plugin from old fpm plugin which is not supported anymore
Remove stale patches for old fpm plugin and add similar patches for dplane_fpm_nl
How to verify it
Build and run on the switch.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
