New features and fixes in the new SDK/FW:
SN4600C | AN/LT support
SN2700 | AN/LT bugs fixes
WJH | FID_MISS support
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Update the sonic-swss submodule. The following is the new commit in the submodule.
```
b34f783 Resolve neighbor when nexthop does not exist (#1704)
500e2e9 [voq/inbandif] Voq inbandif port (#1602)
9f22ba7 Handle IPv6 and ECMP routes to be programmed to ASIC (#1711)
1b916c3 [acl] Add regression test for `config acl` CLI command (#1694)
8bc7aee Allowing the first time FEC and AN configuration to be pushed to SAI (#1705)
d0dd6ee [Dynamic buffer calc][Mellanox] Fix bug: buffer over subscription in buffer pool size calculation (#1706)
d8b8ca9 fix for CRM available bug (#1699)
97f70d1 NAT : Update the CRM used counters for SNAT and DNAT entries (#1655)
a4e05a7 [vstest] System lag test timing issue fix (#1692)
ca8ba6d [vlan] Add support of VLAN host interface (#1645)
#### Why I did it
To build flashrom properly with dependency tracking.
#### How I did it
Moved flashrom code from platform/broadcom/sonic-platform-modules-dell/tools directory to src/flashrom directory.
At the end, flashrom_0.9.7_amd64.deb package is build which will be installed in the devices.
Why I did it
Recent systemd upgrade from #7228 requires an extra cmdline parameter for dockerd to start properly.
Updating boot0 was missed as part of the systemd upgrade change.
How I did it
Just added the missing cmdline parameter in files/Aboot/boot0.j2
This change fixes#7372
How to verify it
Boot the image and dockerd should start normally.
4e063e4 [ci]: setup proper azp
22ae215 [pytest]: add junit xml test result
80171a3 [SNMP] Update description of entPhysicalDescr mib in case interface is not configured. (#205)
Encounter error during "config-setup boot" if the updategraph is enabled.
How I did it
Correct the code inside the config-setup script.
Remove the space between the assignment operator.
How to verify it
Remove the /etc/sonic/config_db.json and reboot the device.
Originally, it will return following error after boot up.
rv: command not found
After modification, it can correctly parse the status of updategraph without error.
Fix to the correct value for all SPC1 devices.
For 10G added 10GB_CX4_XAUI, 10GB_KX4, 10GB_KR, 10GB_SR and 10GB_ER_LR
For 50G added 50GB_SR2
This bitmask represents all the options available for interface type and some were missing.
Note: it was working just fine if you were setting the value from SONiC CLI but not from the default SAI Profile.
Signed-off-by: Shlomi Bitton <shlomibi@nvidia.com>
There was an existing omission in the build jobs that SONIC_CONFIG_MAKE_JOBS wasn't being passed through to the underlying make command in SONIC_MAKE_DEBS, meaning we weren't fully utilizing all of the CPUs during builds.
Co-authored-by: Joe Tricklebank-Owens <Joseph.Tricklebank-Owens@metaswitch.com>
- Support compile sonic arm image on arm server. If arm image compiling is executed on arm server instead of using qemu mode on x86 server, compile time can be saved significantly.
- Add kernel argument systemd.unified_cgroup_hierarchy=0 for upgrade systemd to version 247, according to #7228
- rename multiarch docker to sonic-slave-${distro}-march-${arch}
Co-authored-by: Xianghong Gu <xgu@centecnetworks.com>
Co-authored-by: Shi Lei <shil@centecnetworks.com>
804c9f9 [sonic-swss-common] Add a string utilities function to join items in a container (#463)
1e924ac Fix: ConfigDBConnector call super init with proper parameter name (#470)
70e02c8 [azp] Purge swss before installing the newly built deb package (#472)
15c0f72 [swig] translate SonicV2Connector::keys return type from C++ vector to Python list (#468)
rules/config.user allows overriding default properties without
touching tracked files. This change makes sure all properties
can be set and not just the ones used in slave.mk.
Signed-off-by: Christian Svensson <blue@cmd.nu>
1) Dropped non-required IP update in admin.conf, as all masters use VIP only (#7288)
2) Don't clear VERSION during stop, as it would overwrite new version pending to go.
3) subprocess, get return value from proc and do not imply with presence of data in stderr.
- Fix build issue when `/proc/cmdline` is not available. Fixes#7145
- Properly detect linecard slot from linecard CPU
- Some fixes on the uart link between supervisor and linecard CPU
- Other small fixes
* Add "bgp bestpath peer-type multipath-relax" to frr
This new BGP configuration is akin to "bgp bestpath aspath multipath-relax".
When applied, paths learned from different peer types will be eligible
to be considered for multipath (ECMP). Paths from all of eBGP, iBGP, and
confederation peers may be included in a multipath group if they are
otherwise equal cost.
When such a multipath group is created, it is not desirable for
iBGP nexthops to be discarded from the FIB because they are not directly
connected. So when publishing the nexthop group to zebra, bgpd will allow
recursive resolution, but only when there are iBGP-learned paths in the
group.
This change is merged in FRR in this PR FRRouting/frr#8056
Signed-off-by: Joanne Mikkelson <jmmikkel@arista.com>
This commit has following changes:
* Add templates and code to support VoQ chassis iBGP peers
* Add support to convert a new VoQChassisInternal element in the
BGPSession element of the minigraph to a new BGP_VOQ_CHASSIS_NEIGHBOR
table in CONFIG_DB.
* Add a new set of "voq_chassis" templates to docker-fpm-frr
* Add a new BGP peer manager to bgpcfgd to add neighbors from the
BGP_VOQ_CHASSIS_NEIGHBOR table using the voq_chassis templates.
* Add a test case for minigraph.py, making sure the VoQChassisInternal
element creates a BGP_VOQ_CHASSIS_NEIGHBOR entry, but not if its
value is "false".
* Add a set of test cases for the new voq_chassis templates in
sonic-bgpcfgd tests.
Note that the templates expect the new
"bgp bestpath peer-type multipath-relax" bgpd configuration to be
available.
Signed-off-by: Joanne Mikkelson <jmmikkel@arista.com>
Lack of having the support for no_proxy in SONiC build environment limits enterprise companies to put some internal hacks to ensure the proxy's dont refer to some Intranet site for artifactory downloads etc. Today. Using no_proxy is familiar in proxy settings terminology and excludes traffic destined to certain hosts.
Most Web clients hence support connection to proxy servers via environment variables:
http_proxy / HTTP_PROXY
https_proxy / HTTPS_PROXY
no_proxy / NO_PROXY
These variables tell the client what URL should be used to access the proxy servers and which exceptions should be made.
How to verify it
Simply set up the variable in the bash shell at build time.
export no_proxy=internal.example.com, internal2.example.com
Usage is:
no_proxy is a comma- or space-separated list of machine or domain names, with optional :port part. If no :port
part is present, it applies to all ports on that domain.
Why I did it
Failed to build the centec-arm64 for no space in docker data root.
How I did it
Change to use the data root to the folder under /data.
See detail info about DOCKER_DATA_ROOT_FOR_MULTIARCH in the file Makefile.work.
How to verify it
Set the environment variable, then the /data used as docker root.
- Add peer_switch field to DEVICE_METADATA table
- In PORT table:
- Set used ports to admin status up
- Set mux_cable to true for downlinks in use
- In MUX_CABLE table:
- Only add entry if the downlink is in use
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
#### Why I did it
- xcvrd crash was seen in latest 201811 images.
- For Dell S6100,API 2.0 uses poll mode while 1.0 was still using interrupt mode.
#### How I did it
- Modified get_transceiver_change_event in 1.0 to poll mode.
c4d4790 [xcvrd] refactor Y-Cable firmware information to conform with all vendors (#171)
be7f4e1 [voqinband]Support for inband port as regular port (#145)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
eff5c1c [thermalctld] No need exit thermalcltd when loading invalid policy file (#172)
5b6d9c0 [syseepromd] Add unit tests; Refactor to allow for greater unit test coverage (#156)
This improvement reads current SONiC version directly from `/proc/cmdline`.
it supports `grub/aboot/uboot` bootloaders.
**Code snippet**:
```bash
cat /proc/cmdline | sed -n 's/^.*loop=\/*image-\(\S\+\)\/.*$/\1/p'
```
**Description**:
```
-n don't print lines
s substitute
^.* matches anything before the <image_version>
loop= matches <loop> kernel parameter
\/*image- matches <image_version> prefix
\(\S\+\) matches <image_version> group and assigns it to \1
\/.*$ matches anything after the <image_version>
\1 replace everything with <image_version>
p print it
```
closes#6267
#### Why I did it
* To fix#6267
#### How I did it
* Fixed installer scripts
#### How to verify it
1. Write invalid SONiC version to sonic_version.yml
2. Run SONiC-To-SONiC update
Support to merge the SONiC package versions upgrade pull request automatically.
#### How I did it
Add the automerge tag in the pull request.
1. Sent by the author mssonicbld
2. Only contains changes in files/build/**/*
3. Only for the specified branch 202012
Merge the pull request.
1. Sent by the author mssonicbld
2. The Azure Pipelines checker complete and successful
3. The pull request contains label automerge
Why I did it
Fix the wrong build options and improve display name for some tasks
1. Fix the wrong build architecture for arm64 and armhf
2. Fix the build timeout parameter
1c3f75e (HEAD -> master, origin/master, origin/HEAD) pindown the version of github.com/openconfig/gnoi (#76)
33acd5b [ci]: setup proper azp (#75)
5d82051 [CI] Set up CI with Azure Pipelines (#72)
0688cdb Remove go get commands from Makefile to prevent go.mod file from chan… (#66)
5c63670 (HEAD, origin/master, origin/HEAD) [intfmgrd] reach reconciled state at start when there are no interfaces configuration to process (#1695)
66e1aab [Dynamic Buffer Calc] Enhancement: coding style and LGTM alerts (#1693)
637e8d0 Skip Macsec test case till macsec orch code is made SAIv1.8.0 compatible (#1688)
872b5cb [ci]: archive swss pytests (#1690)
73cbd91 [Makefile] Reorder libsaimetadata and libswsscommon (#1689)
cba6576 Correct the sflow default sample rate (#1623)
aac71e6 Don't update pools when ingress_lossless_pool is created but the initialization hasn't finished yet (#1685)
ae5f051 Fix dynamic buffer bug occuring in rare condition (#1678)
691bd30 [voq/systemlag] Voq system lag functionality (#1605)
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
With the latest 201911 image, the following error was seen on staging devices with TSB command ( for both single asic, multi asic ). Though this err message doesn't affect the TSB functionality, it is good to fix.
admin@STG01-0101-0102-01T1:~$ TSB
BGP0 : % Could not find route-map entry TO_TIER0_V4 20
line 1: Failure to communicate[13] to zebra, line: no route-map TO_TIER0_V4 permit 20
% Could not find route-map entry TO_TIER0_V4 30
line 2: Failure to communicate[13] to zebra, line: no route-map TO_TIER0_V4 deny 30
In addition, in this PR I am fixing the message displayed to user when there are no BGP neighbors configured on that BGP instance. In multi-asic device there could be case where there are no BGP neighbors configured on a particular ASIC.
Why I did it
Add bgpcfgd support for static routes.
How I did it
Add bgpcfgd support to subscribe changes in STATIC_ROUTE table in CONFIG_DB and program via vtysh. The key of STATIC_ROUTE table is formatted as STATIC_ROUTE|vrf|ip_prefix, while the vrf is optional. If would be treated the same as "default" if no vrf is given.
Add unit tests.
#### Why I did it
Allowing an application to set a stop timeout for processes and threads provides the following benefits:
1. Prevents the application from hanging indefinitely in the case a process or thread does not exit
2. Allow ProcessTaskBase a chance to let the process exit gracefully before attempting to kill it
Default values are as follows:
- ProcessTaskBase: 1 second
- ThreadTaskBase: No timeout
#### How I did it
- Add optional `stop_timeout_secs` parameter to initializers of ProcessTaskBase and ThreadTaskBase
- Additionally:
- Prefix private attributes with an underscore
- Remove obsolete comments
