#### Why I did it
As of https://github.com/Azure/sonic-swss-common/pull/587 the blackout issue in ConfigDBConnector has been resolved.
In the past hostcfgd was refactored to use SubscriberStateTable instead of ConfigDBConnector for subscribing to CONFIG_DB updates due to a "blackout" period between hostcfgd pulling the table data down and running the initialization and actually calling `listen()` on ConfigDBConnector which starts the update handler.
However SusbscriberStateTable creates many file descriptors against the redis DB which is inefficient compared to ConfigDBConnector which only opens a single file descriptor.
With the new fix to ConfigDBConnector I refactored hostcfgd to take advantage of these updates.
#### How I did it
Replaced SubscriberStateTable with ConfigDBConnector
#### How to verify it
The functionality of hostcfgd can be verified by booting the switch and verifying that NTP is properly configured.
To check the blackout period you can add a delay in the hostcfgd `load()` function and also add a print statement before and after the load so you know when it occurs. Then restart hostcfgd and wait for the load to start, then during the load push a partial change to the FEATURE table and verify that the change is picked up and the feature is enabled after the load period finishes.
#### Description for the changelog
[hostcfgd] Move hostcfgd back to ConfigDBConnector for subscribing to updates
Why I did it
Exclude the innovium build in upgrading version build, currently, the builds are always failed, exclude the build temporarily.
Increase the broadcom build timeout.
Why I did it
Running warm-reboot in a loop for 500 times leads to this error on 318-th iteration:
Apr 2 15:56:27.346747 sonic INFO swss#/supervisord: restore_neighbors Traceback (most recent call last):
Apr 2 15:56:27.346747 sonic INFO swss#/supervisord: restore_neighbors File "/usr/bin/restore_neighbors.py", line 24, in <module>
Apr 2 15:56:27.346747 sonic INFO swss#/supervisord: restore_neighbors from scapy.all import conf, in6_getnsma, inet_pton, inet_ntop, in6_getnsmac, get_if_hwaddr, Ether, ARP, IPv6, ICMPv6ND_NS, ICMPv6NDOptSrcLLAddr
Apr 2 15:56:27.346795 sonic INFO swss#/supervisord: restore_neighbors File "/usr/local/lib/python3.7/dist-packages/scapy/all.py", line 25, in <module>
Apr 2 15:56:27.346956 sonic INFO swss#/supervisord: restore_neighbors from scapy.route import *
Apr 2 15:56:27.346995 sonic INFO swss#/supervisord: restore_neighbors File "/usr/local/lib/python3.7/dist-packages/scapy/route.py", line 205, in <module>
Apr 2 15:56:27.347089 sonic INFO swss#/supervisord: restore_neighbors conf.iface = get_working_if()
Apr 2 15:56:27.347129 sonic INFO swss#/supervisord: restore_neighbors File "/usr/local/lib/python3.7/dist-packages/scapy/arch/linux.py", line 128, in get_working_if
Apr 2 15:56:27.347213 sonic INFO swss#/supervisord: restore_neighbors ifflags = struct.unpack("16xH14x", get_if(i, SIOCGIFFLAGS))[0]
Apr 2 15:56:27.347250 sonic INFO swss#/supervisord: restore_neighbors File "/usr/local/lib/python3.7/dist-packages/scapy/arch/common.py", line 31, in get_if
Apr 2 15:56:27.347345 sonic INFO swss#/supervisord: restore_neighbors return ioctl(sck, cmd, struct.pack("16s16x", iff.encode("utf8")))
Apr 2 15:56:27.347365 sonic INFO swss#/supervisord: restore_neighbors OSError: [Errno 19] No such device
The issue was reported to scapy devs secdev/scapy#3369, the fix is secdev/scapy#3371, however there is no released scapy version with this fix right now, thus decided to build scapy v2.4.5 from sources and apply the fix in a form of a patch.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
In order to include the following commit:
0f06910 [PBH] Implement Edit Flows (Azure/sonic-swss#2169)
sonic-swss
50d5be2 Make changes to support compiling on Bullseye with GCC 10 (#2216)
0870cf5 [mirrororch]: Implement HW resources availability validation for SPAN/ERSPAN (#2187)
f4ec565 [vlanmgrd] fix use-after-free memory issue (#2211)
c2de7fc [QosOrch] The notifications cannot be drained in QosOrch in case the first one needs to retry (#2206)
5575935 [neighsyncd] increase neighsyncd timeout (#2209)
0f06910 [PBH] Implement Edit Flows (#2169)
6241bbf Remove redundant and problematic code to skip "pool" field in buffer profile handling (#2197)
a55343c [azp]: Set diff coverage threshhold to 80% (#2188)
390cae1 [portsorch]: Prevent LAG member configuration when port has active ACL binding (#2165)
c1d47e6 [VNET]Fixing nexthop group delete during route change (#2198)
8941cc0 [BFD]Registering BFD state change callback during session creation (#2202)
680c539 [vxlan] Remove tunnel map objects on VNET tunnel removal (#2150)
20dde0c Fix for handling broadcom DNX ASIC to have ipv4 and ipv6 ACL rules in separate tables. (#2178)
5b7c949 [FdbOrch] SAI_FDB_EVENT_MOVE generates update with empty update.entry.port_name (#2200)
7350d49 [Vxlanmgr] vnet netdev cleanup during config reload fix (#2191)
2bef62b Validate LAG has members before mirror session create (#2130)
1e4d4ce [VS test] Increase VS test time, skip dpb flaky test (#2195)
6eda965 [vstest]Migrating vs tests from using click commands to direct DB access (#2179)
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
Why I did it
Need to run yang validation for sonic-cfggen unit test, and many unit test does not provide speed for port table.
How I did it
Update minigraph xml.
How to verify it
Run sonic-cfggen unit test.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Fix#9746
How I did it
Split the check condition based on non-exist and zero length.
How to verify it
Run verification script when table contains empty value
890f32f LLDPLocalSystemDataUpdater Exception Log Handled (#249)
2151731 Handle error seen on system where vlan interface map is not present (#246)
c6141c7 [build] use Azure.sonic-buildimage.official.vs pipeline as artifact source (#248)
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
- Why I did it
Fixes#9628
During bootup, this error log is seen
Dec 22 04:26:29 sonic interfaces-config.sh[2546]: error: main exception: cannot find interfaces: eth0 (interface was probably never up ?)
This is of non-functional nature and doesn't affect the flow.
- How I did it
Dont take the ifdown if not needed
- How to verify it
Verified during reboot. Log did not appear and IP was acquired on eth0 as expected
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
Why I did it
ASN range is from 1 to 4294967295, need to remove invalid ASN.
How I did it
Update unit test and replace ASN 0.
How to verify it
Run unit test for sonic-config-engine.
Signed-off-by: Gang Lv ganglv@microsoft.com
* [BFN] Fix for run fwutil without sudo
SONiC has a concept of "platform components"
this may include - CPLD, FPGA, BIOS, BMC, etc.
These changes are needed to read the version of the BIOS and BMC component.
What I did
The previous implementaion of component.py expect fwutil run with sudo.
When fwutil run without sudo, there are an exception:
```
Traceback (most recent call last):
File "/usr/local/bin/fwutil", line 5, in <module>
from fwutil.main import cli
File "/usr/local/lib/python3.9/dist-packages/fwutil/__init__.py", line 3, in <module>
from . import main
File "/usr/local/lib/python3.9/dist-packages/fwutil/main.py", line 40, in <module>
pdp = PlatformDataProvider()
File "/usr/local/lib/python3.9/dist-packages/fwutil/lib.py", line 159, in __init__
self.__platform = Platform()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/platform.py", line 21, in __init__
self._chassis = Chassis()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/chassis.py", line 48, in __init__
self.__initialize_components()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/chassis.py", line 136, in __initialize_components
component = Components(index)
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/component.py", line 184, in __init__
self.version = get_bios_version()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/component.py", line 19, in get_bios_version
return subprocess.check_output(['dmidecode', '-s', 'bios-version']).strip().decode()
File "/usr/lib/python3.9/subprocess.py", line 424, in check_output
return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
File "/usr/lib/python3.9/subprocess.py", line 505, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.9/subprocess.py", line 951, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.9/subprocess.py", line 1823, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'dmidecode'
```
How I did it
Modification of dmidecode command
How to verify it
Run manually 'fwutil' (without sudo)
Previous command output had exception
New command output:
Root privileges are required
Signed-off-by: Taras Keryk <tarasx.keryk@intel.com>
* Why I did it
The previous implementaion of component.py expect fwutil run with sudo.
When fwutil run without sudo, there are an exception:
Traceback (most recent call last):
File "/usr/local/bin/fwutil", line 5, in <module>
from fwutil.main import cli
File "/usr/local/lib/python3.9/dist-packages/fwutil/__init__.py", line 3, in <module>
from . import main
File "/usr/local/lib/python3.9/dist-packages/fwutil/main.py", line 40, in <module>
pdp = PlatformDataProvider()
File "/usr/local/lib/python3.9/dist-packages/fwutil/lib.py", line 159, in __init__
self.__platform = Platform()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/platform.py", line 21, in __init__
self._chassis = Chassis()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/chassis.py", line 48, in __init__
self.__initialize_components()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/chassis.py", line 136, in __initialize_components
component = Components(index)
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/component.py", line 184, in __init__
self.version = get_bios_version()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/component.py", line 19, in get_bios_version
return subprocess.check_output(['dmidecode', '-s', 'bios-version']).strip().decode()
File "/usr/lib/python3.9/subprocess.py", line 424, in check_output
return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
File "/usr/lib/python3.9/subprocess.py", line 505, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.9/subprocess.py", line 951, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.9/subprocess.py", line 1823, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'dmidecode'
How I did it
Modification of dmidecode command
How to verify it
Run manually 'fwutil' (without sudo)
Previous command output had exception
New command output:
Root privileges are required
Signed-off-by: Taras Keryk tarasx.keryk@intel.com
Signed-off-by: Taras Keryk <tarasx.keryk@intel.com>
* rewrite a call of dmidecode, when run without sudo
Signed-off-by: Taras Keryk <tarasx.keryk@intel.com>
* Why I did it
The previous implementaion of component.py expect fwutil run with sudo.
When fwutil run without sudo, there are an exception:
Traceback (most recent call last):
File "/usr/local/bin/fwutil", line 5, in <module>
from fwutil.main import cli
File "/usr/local/lib/python3.9/dist-packages/fwutil/__init__.py", line 3, in <module>
from . import main
File "/usr/local/lib/python3.9/dist-packages/fwutil/main.py", line 40, in <module>
pdp = PlatformDataProvider()
File "/usr/local/lib/python3.9/dist-packages/fwutil/lib.py", line 159, in __init__
self.__platform = Platform()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/platform.py", line 21, in __init__
self._chassis = Chassis()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/chassis.py", line 48, in __init__
self.__initialize_components()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/chassis.py", line 136, in __initialize_components
component = Components(index)
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/component.py", line 184, in __init__
self.version = get_bios_version()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/component.py", line 19, in get_bios_version
return subprocess.check_output(['dmidecode', '-s', 'bios-version']).strip().decode()
File "/usr/lib/python3.9/subprocess.py", line 424, in check_output
return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
File "/usr/lib/python3.9/subprocess.py", line 505, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.9/subprocess.py", line 951, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.9/subprocess.py", line 1823, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'dmidecode'
The previous implementaion of eeprom.py expect fwutil run with sudo.
When fwutil run without sudo, there are an exception:
Traceback (most recent call last):
File "/usr/lib/python3.9/logging/config.py", line 564, in configure
handler = self.configure_handler(handlers[name])
File "/usr/lib/python3.9/logging/config.py", line 745, in configure_handler
result = factory(**kwargs)
File "/usr/lib/python3.9/logging/handlers.py", line 153, in init
BaseRotatingHandler.init(self, filename, mode, encoding=encoding,
File "/usr/lib/python3.9/logging/handlers.py", line 58, in init
logging.FileHandler.init(self, filename, mode=mode,
File "/usr/lib/python3.9/logging/init.py", line 1142, in init
StreamHandler.init(self, self._open())
File "/usr/lib/python3.9/logging/init.py", line 1171, in _open
return open(self.baseFilename, self.mode, encoding=self.encoding,
PermissionError: [Errno 13] Permission denied: '/var/log/platform.log'
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/usr/local/bin/fwutil", line 5, in
from fwutil.main import cli
File "/usr/local/lib/python3.9/dist-packages/fwutil/init.py", line 3, in
from . import main
File "/usr/local/lib/python3.9/dist-packages/fwutil/main.py", line 41, in
pdp = PlatformDataProvider()
File "/usr/local/lib/python3.9/dist-packages/fwutil/lib.py", line 162, in init
self.chassis_component_map = self.__get_chassis_component_map()
File "/usr/local/lib/python3.9/dist-packages/fwutil/lib.py", line 168, in __get_chassis_component_map
chassis_name = self.__chassis.get_name()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/chassis.py", line 146, in get_name
return self._eeprom.modelstr()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/chassis.py", line 54, in _eeprom
self.__eeprom = Eeprom()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/eeprom.py", line 50, in init
logging.config.dictConfig(config_dict)
File "/usr/lib/python3.9/logging/config.py", line 809, in dictConfig
dictConfigClass(config).configure()
File "/usr/lib/python3.9/logging/config.py", line 571, in configure
raise ValueError('Unable to configure handler '
ValueError: Unable to configure handler 'file'
How I did it
Modification call of dmidecode command.
Added modification of log files access attributes before file open operations.
How to verify it
Run manually 'fwutil' (without sudo)
New command output have no exception.
Signed-off-by: Taras Keryk <tarasx.keryk@intel.com>
* Added file_check for checking access to log files for eeprom.py
Signed-off-by: Taras Keryk <tarasx.keryk@intel.com>
* Removed unused import
* Added logfile_create to eeprom.py and chassis.py
Signed-off-by: Taras Keryk <tarasx.keryk@intel.com>
* Created platform_utils.py
Signed-off-by: Taras Keryk <tarasx.keryk@intel.com>
* Added interpreter string to platform_utils.py
Signed-off-by: Taras Keryk <tarasx.keryk@intel.com>
In order to include the following commit:
c752457 [PBH] Implement Edit Flows (Azure/sonic-utilities#2093)
sonic-utilities
f70dc27 [techsupport] Handle minor fixes of TS Lock and update auto-TS (#2114)
51d3550 Fix issues in clear_qos (#2122)
6d3aa1e [GCU] Optimizing moves by adding generators for keys/tables (#2120)
65a5a6b Fixing get port speed when oper status is down (#2123)
c752457 [PBH] Implement Edit Flows (#2093)
827358f [debug dump] dump interface module added (#2070)
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
Why I did it
Need to run yang validation for sonic-cfggen unit test, and many unit test does not provide lanes for port table.
How I did it
Update port config file.
How to verify it
Run sonic-cfggen unit test,
Use below PR to verify
#10228
Signed-off-by: Gang Lv ganglv@microsoft.com
*[Submodule update] sonic-py-swssdk
78f167e4728f939712b3f3ea550949e2ea675fec With the changes in PR:https://github.com/Azure/sonic-buildimage/pull/5289 access to redis unix socket is given to the redis group members. Many of sonic-util commands (especially in multi-asic) case use redis unix socket to connect to DB and thus those comamnd fails without providing sudo. This PR is continuation of PR: https://github.com/Azure/sonic-buildimage/pull/7002 where we default to use TCP for Redis if user is not root
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
Fix the generating version file failure issue caused by artifacts folder change.
When changing to use the same template for PR build, official build and packages version upgrade, the artifacts folder adding a "target" folder, the version upgrade task should be changed accordingly.
#### Why I did it
To take the following into sonic-buildimage
36e1f61 API endpoints to ConfigDBConnector to support pre-loading data without blackout (#587)
[sonic-swss-common](https://github.com/Azure/sonic-swss-common)
```
36e1f61 API endpoints to ConfigDBConnector to support pre-loading data without blackout (#587)
556f4ad Add SAI copy action to ACL schema (#591)
db18c3a Fix bitwidth of mac address in SAI ACL schema (#590)
e9442bb [ConfigDBPipeConnector]: Added set_entry API (#586)
6c007c0 Update README for gmock (#562)
```
[sonic-linkmgrd](https://github.com/Azure/sonic-linkmgrd)
```
83dfc99 Enforce uniform file/class naming convention (#52)
83004bf Shutdown ICMP heartbeats when default route state is missing and ToR is in `auto` mode (#44)
b81ea31 Add `LinkProberStateMachineActiveActive` (#47)
c43cf7a Decrease link probing interval after switchover to better determine the overhead of a toggle (#43)
2239fbe Enhance clang format (#46)
```
#### How I did it
* Advanced submodules pointers
#### How to verify it
1. make configure PLATFORM=mellanox
2. make target/sonic-mellanox.bin
Why I did it
docker hub will limit the pull rate.
Use ACR instead to pull debian related docker image.
How I did it
Set DEFAULT_CONTAINER_REGISTRY in pipeline.
Why I did it
dhcp_server is introduced, and need to update yang model.
How I did it
Update yang models and add unit test.
How to verify it
Run unit test for sonic-yang-models.
Signed-off-by: Gang Lv ganglv@microsoft.com
Change the base image from `docker-config-engine-buster` to
`docker-config-engine-bullseye`, and remove the hardcoded
`radvd` version from the Dockerfile.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
Support pddf to as4630/as7816/as7326
How I did it
Send needed file to the PR for these platform
How to verify it
Test sensors and show platform cmd.
root@as7326-56x-3:/home/admin# show platform psustatus
PSU Model Serial HW Rev Voltage (V) Current (A) Power (W) Status LED
PSU 1 FSF045-611 FSF0451912000505 N/A 12.06 5.50 66.00 OK green
PSU 2 FSF045-611 FSF0451912000568 N/A 12.00 5.50 66.00 OK green
root@as7326-56x-3:/home/admin# sensors
lm75-i2c-15-4a
Adapter: i2c-1-mux (chan_id 6)
Main Board Temperature: +35.5 C (high = +80.0 C, hyst = +75.0 C)
lm75-i2c-15-4b
Adapter: i2c-1-mux (chan_id 6)
CPU Board Temperature: +29.0 C (high = +80.0 C, hyst = +75.0 C)
fan_ctrl-i2c-11-66
Adapter: i2c-1-mux (chan_id 2)
fan1: 9100 RPM
fan2: 9400 RPM
fan3: 9300 RPM
fan4: 9600 RPM
fan5: 9000 RPM
fan6: 9100 RPM
fan7: 9100 RPM
fan8: 9300 RPM
fan9: 9200 RPM
fan10: 9400 RPM
fan11: 9200 RPM
fan12: 9400 RPM
pch_haswell-virtual-0
Adapter: Virtual device
temp1: +43.0 C
psu_pmbus-i2c-17-59
Adapter: i2c-1-mux (chan_id 0)
in3: +12.06 V
fan1: 6272 RPM
temp1: +37.0 C
power2: 60.00 W
curr2: +6.00 A
lm75-i2c-15-49
Adapter: i2c-1-mux (chan_id 6)
Main Board Temperature: +40.0 C (high = +80.0 C, hyst = +75.0 C)
lm75-i2c-15-48
Adapter: i2c-1-mux (chan_id 6)
Main Board Temperature: +39.0 C (high = +80.0 C, hyst = +75.0 C)
psu_pmbus-i2c-13-5b
Adapter: i2c-1-mux (chan_id 4)
in3: +12.00 V
fan1: 6144 RPM
temp1: +36.0 C
power2: 66.00 W
curr2: +5.50 A
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +50.0 C (high = +82.0 C, crit = +104.0 C)
Core 0: +50.0 C (high = +82.0 C, crit = +104.0 C)
Core 1: +50.0 C (high = +82.0 C, crit = +104.0 C)
Core 2: +50.0 C (high = +82.0 C, crit = +104.0 C)
Core 3: +50.0 C (high = +82.0 C, crit = +104.0 C)
Signed-off-by: Jostar Yang <jostar_yang@accton.com.tw>
Why I did it
Added platform.json file for N3248TE
How I did it
Defined the platform.json file with the required components under chassis.
How to verify it
validated the API 2.0 test suite
Co-authored-by: Arun LK <Arun_L_K@dell.com>
DellEMC: N3248TE platform API2.0 changes
Why I did it
N3248TE Platform API 2.0 changes
How I did it
Implemented the functional API's needed for Platform API 2.0
Added system_health_monitoring_config.json file
How to verify it
Used the API 2.0 test suite to validate the test cases.
Co-authored-by: Arun LK <Arun_L_K@dell.com>
Why I did it
DellEMC : Added support for N3248TE/N3248PXE platforms
How I did it
Implemented the changes to enable/disable the watchdog support
How to verify it
watchdog_unit_test.txt
Co-authored-by: Arun LK <Arun_L_K@dell.com>
- Why I did it
Fastboot will delay all counters in CONFIG DB, it relies on enable_counters.py to recover the delayed counters. However, enable_counters.py does not recover those non-default counters.
- How I did it
For non-default counters, if it is in CONFIG DB, put delay status to false after the waiting.
- How to verify it
Manual test
1ccda8d MACsec in Gearbox (#993)
7a2b824 Update SAI submodule (#1015)
418d5fb Add pre match logic for lag member (#1008)
Signed-off-by: Myron Sosyak <myronx.sosyak@intel.com>
#### Why I did it
When too many user login concurrently and run commands, SONiC may kernel panic on some device which has very limited memory.
#### How I did it
Add j2 template for setup pam_limit plugin for limit SSH session per-user.
#### How to verify it
Manually validate the j2 template can generate correct config file.
#### Which release branch to backport (provide reason below if selected)
- [x] 201811
- [ ] 201911
- [ ] 202006
- [x] 202012
- [x] 202106
- [x] 202111
#### Description for the changelog
Add j2 template for setup pam_limit plugin for limit SSH session per-user.
#### A picture of a cute animal (not mandatory but encouraged)
Why I did it
sonic-config-engine unit test is using invalid switch_type
How I did it
Update xml with correct switch_type
How to verify it
Run UT for sonic-config-engine
Signed-off-by: Gang Lv ganglv@microsoft.com
- Why I did it
Take new hw-mgmt release to SONiC, including:
New features:
1. hw-mgmt: add to PSU FW upgrade tool command to show current FW version
2. hw-mgmt: add to PSU FW upgrade tool support for single-PSU-in-the-system FW upgrade
3. hw-mgmt: add attribute “/firmware” to show FW version of restricted upgradable PSUs only
4. hw-mgmt: Add NVME temperature reports attributes (_alarm/_crit/_min/_max)
Bug fix:
1. psu: redundant i2c_addr attributes being created for psu 3 & 4 in system having only 2 psus.
2. hw-mgmt: in SPC1/2 i2c driver removal is too slow vs. ASIC reset causing non-functional log errors
3. PSU thresholds sysfs changed in 5.10 to “read only” preventing modification (modification required due PSU HW bug)
4. CPLD3 sysfs attribute missing after chip down/up flow
5. sysfs attributes missing when hw-mgmt is restarted (stop/start) within systemd
Release notes can be found from link https://github.com/Mellanox/hw-mgmt/blob/V.7.0020.2004/debian/Release.txt
- How I did it
Update hw-mgmt make file with new version number
Update hw-mgmt submodule pointer
- How to verify it
Run platform regression on all Mellanox platform
Signed-off-by: Kebo Liu <kebol@nvidia.com>
