Master/202012 image size grew quite a bit. 3.7G harddrive can no longer hold one image and safely upgrade to another image. Every bit of harddrive space is precious to save now.
Also sh syntax seemingly changed, [ condition ] && action was a legit syntax in 201911 branch but it is an error when condition not met with 202012 or later images. Change the syntax to if statement to avoid the issue.
Signed-off-by: Ying Xie ying.xie@microsoft.com
Deliver sfputil support for sfputil show eeprom and sfputil reset along with some component test case fixes
Co-authored-by: Carl Keene <keene@nokia.com>
Fix#7968
Issue is detected on SONiC.20201231.11
In test_static_route.py::test_static_route_ecmp static routes are configured, but neighbors are not resolved after config reload even after 10 minutes.
It looks like the arp_update script is starting to ping when Vlan1000 is not fully configured.
When issue is reproduced, stuck ping6 process is observed in swss container :
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 180 0.1 0.0 6296 1272 pts/0 S 17:03 0:03 ping6 -I Vlan1000 -n -q -i 0 -c 1 -W 0 ff02::1
And when arp_update script successfully resolves neighbors, we observe sleep 300 instead of ping process
When using dpkg with the --root flag to install a deb package in a
chroot, dpkg checks to see if the users and groups specified in the
/var/lib/dpkg/statoverride file are valid. The problem is, it checks
against the host system's /etc/passwd and /etc/group files, instead of
/etc/passwd and /etc/group inside the chroot.
In the slave image for Buster, cron appears to have been automatically
installed, and so the crontab group existed. This doesn't appear to be
true for Bullseye, so explicitly install it. This makes sure that the
crontab group exists on the slave image itself.
Also install the mock python 3 package, this is needed by some test.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
In version 3.0.0, If a broadcast address is specified in
/etc/network/interfaces, then when ifup is run, it will fail with an
error saying `'str' object has no attribute 'packed'`. This appears to
be because it expects all attributes for an interface to be "packable"
into a compact binary representation. However, it doesn't actually
convert the broadcast address into an IPNetwork object (other addresses
are handled).
Therefore, convert the broadcast address it reads in from a str to an
IPNetwork object.
Also explicitly specify the scope of the loopback address in
/etc/network/interfaces as host scope. Otherwise, it will get added as
global scope by default. As part of this, use JSON to parse ip's output
instead of text, for robustness.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
The start template script that this value is used in will determine what
network namespace to use, and will add --net=host if it needs to run in
the host namespace.
With Docker 20.10, if --net=host is specified twice in docker run, then
it errors out. Therefore, remove the explicit --net=host in the run
options setting and let the start template script specify it.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
With a Bullseye base image, and PTF being based on Stretch, if there are
autogenerated files that are reused from the Bullseye build for Stretch,
then autoconf-based packages will fail. This is because the default set
of CFLAGS that dpkg passes in includes `-ffile-prefix-map=`, which is
not a supported flag with the GCC in Stretch. Then, when running `make
clean` in a Stretch environment, make will try to regenerate the
autoconf-based files with the cached set of CFLAGS from Bullseye. This
causes an error, since that flag is unknown.
To work around this, after each build, clean up all built objects and
autogenerated files. This makes sure that it is cleaned up in the same
environment as the build environment.
Note that this issue affects just autoconf packages. For apps using just
regular Makefiles, they will probably be fine (they'll still be cleaned
up as well).
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
strncpy calls need to be mindful about the destination buffer size
passed in and doing an explicit null termination.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
This PR for submodule update adds the following commits
ce51894 [Y-Cable] add the definition inside setup.py to include sonic_y_cable.credo as a package (#211)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Why I did it
[DPB] BGP_NEIGHBOR yang model causing DPB errors.
How I did it
Allowed the BGP_NEIGHBOR list with just IP as the key to allow the current BGP neighbor table in the community.
How to verify it
Built the SONIC YANG models.
d8ca31c (origin/master, origin/HEAD, master) [vnet/vxlan] Add support of multiple mappers for the VxLAN tunnel (#1843)
7280e19 [orchagent][ports] Add port reference increment / decrement to lag member add / remove flows (#1825)
0217b66 [nhg]: Add support for weight in nexthop group member. (#1853)
df96059 VOQ: Nexthop for remote VOQ LC should be created on inband OIF. (#1823)
8f7ea14 Code changes to support IPv6 Link local enhancements (#1463)
8674b3c Open record file in append mode (#1845)
Signed-off-by: Andriy Yurkiv <ayurkiv@nvidia.com>
Why I did it
Support to build armhf/arm64 platforms on arm based system without qemu simulator.
When building the armhf/arm64 on arm based system, it is not necessary to use qemu simulator.
How I did it
Build armhf on armhf system, or build arm64 on arm64 system, by default, qemu simulator will not be used.
When building armhf on arm64, and you have enabled armhf docker, then it will build images without simulator automatically. It is based how the docker service is run.
Docker base image change:
For amd64, change from debian:to amd64/debian:
For arm64, change from multiarch/debian-debootstrap:arm64- to arm64v8/debian:
For armhf, change from multiarch/debian-debootstrap:armhf- to arm32v7/debian:
See https://github.com/docker-library/official-images#architectures-other-than-amd64
The mapping relations:
arm32v6 --- armel
arm32v7 --- armhf
arm64v8 --- arm64
Docker image armhf deprecated info: https://hub.docker.com/r/armhf/debian, using arm32v7 instead.
* add hwsku.json for the Nokia-7215
* added required default_brkout_mode to hwsku as its not optional
* remove tabs from the file so spacing consistent
Co-authored-by: Carl Keene <keene@nokia.com>
Why I did it
fix the dx010 system eeprom unavailable issue
How I did it
enable the i2c slave 30ms timeout mechanism
How to verify it
i2cstress test in DX010 iSMT controller bus
Co-authored-by: nicwu-cel <nicwu@celestica.com>
#### Why I did it
New SN410 A1 system has a different sensor layout with A0 system, needs a new sensor conf file to support it.
#### How I did it
Since the SN4410 A1 system use exactly the same sensor layout as the SN4700 A1 system, so add a symbol link linking to the SN4700 A1 sensor conf file to reuse.
#### How to verify it
Run sensor test against the SN4410 A1 system;
Run platform related regression test against the SN4410 A1 system
enable automated test suites to selectively run relevant tests ( or not run tests ) based upon a new port_type identifier in hwsku.json
How I did it
Modified the valid optional fields in validity check for hwsku.json per recommendation from Joe in
https://github.com/Azure/sonic-mgmt/pull/2654/files
Co-authored-by: Carl Keene <keene@nokia.com>
Co-authored-by: Arun LK <Arun_L_K@dell.com>
Why I did it
Support for show system-health command in s5232f
How I did it
Added the configuration, API changes to support system health
How to verify it
Execute "show system-health summary/detail/monitor-list" CLI.
Signed-off-by: Rajkumar Pennadam Ramamoorthy rpennadamram@marvell.com
Why I did it
Install sonic image from ONIE. Once system is up, execute "config reload" command.
Root cause is that "determine-reboot-cause.service" was in failed state.
root@sonic:/host/reboot-cause# systemctl list-units --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
● determine-reboot-cause.service loaded failed failed Reboot cause determination service
How I did it
Fixed the issue by setting default reason to "REBOOT_CAUSE_UNKNOWN" instead of "None".
How to verify it
Check " determine-reboot-cause.service' loaded successfully post image installation from ONIE.
Verify "reboot-cause.txt" file is created and config reload succeeds.
Use DOCKER_HOST. Every client including docker command and python docker API uses this environment variable to connect to dockerd.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
#### Why I did it
hostcfgd is starting at the same time as 'create_switch' method is called on orchagent process.
This introduce a degradation on the function execution time which eventually cause the fast-boot flow and a boot scenarion in general to run slower (~6 seconds).
This change will delay the start time of this daemon.
The aaastatsd will delay as well since it has a dependency on hostcfgd, so it is required to delay both.
90 seconds determined as the maximum allowed downtime for control plane to come back up on fast-boot flow.
#### How I did it
Add two timers for hostcfgd and aaastatsd services in order to delay the startup of these services.
#### How to verify it
Install an image with this change and observe the daemons start 90 seconds after the system boot.
This PR updates the following commits
cd3cca7 [Y-Cable][Credo] Credo implementation of YCable class which inherits from YCableBase required for Y-Cable API's in sonic-platform-daemons (#203)
bd694b2 Load interval from thermal_policy.json (#178)
c43dc17 [sonic_y_cable] add abstract class YCableBase required for Y-cable API support for multiple vendors (#186)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
the branch refers the branch name that the commit is in,
for example master, 202012, 201911, ...
In case there is no branch, the name will be HEAD.
release is encoded in /etc/sonic/sonic_release file.
the file is only available for a release branch.
It is not available in master branch.
example for master branch
```
build_version: 'master.602-6efc0a88'
debian_version: '10.7'
kernel_version: '4.19.0-9-2-amd64'
asic_type: vs
commit_id: '6efc0a88'
branch: 'master'
release: 'none'
build_date: Tue Dec 29 06:54:02 UTC 2020
build_number: 602
built_by: johnar@jenkins-worker-23
```
example for 202012 release branch
```
build_version: '202012.602-6efc0a88'
debian_version: '10.7'
kernel_version: '4.19.0-9-2-amd64'
asic_type: vs
commit_id: '6efc0a88'
branch: '202012'
release: '202012'
build_date: Tue Dec 29 06:54:02 UTC 2020
build_number: 602
built_by: johnar@jenkins-worker-23
```
Signed-off-by: Guohan Lu <lguohan@gmail.com>
#### Why I did it
* `arp_update` fails to ping those neighbors over vlan sub interfaces.
#### How I did it
* modify `arp_update_vars.j2` to get vlan sub interfaces with ipv6 addresses assigned.
* modify `arp_update` to send ipv6 pings over those retrieved vlan sub interfaces.
Signed-off-by: Longxiang Lyu <lolv@microsoft.com>
* Update default cable len to 0m for TD2 (#8298)
* Update sonic-cfggen tests with the correct cable len
Signed-off-by: Neetha John <nejo@microsoft.com>
As part of the buffer reclamation efforts for TD2, setting the default cable len to 0m which means unused ports will have a cable len of 0m.
Why I did it
To align with the changes in Azure/sonic-swss#1830
How to verify it
- With the default cable len set to 0m and the associated changes in swss, CABLE_LENGTH table had '0m' set for unused ports and accordingly more space was reserved for the shared pool
- Cfggen tests passed with the cable len update
