Python 2 isn't installed by default in Buster and Bullseye containers,
and the scripts/modules can be used with Python 3, so make sure Python 3
is used.
Why I did it
After the Buster and Bullseye upgrade for the restapi container, processes will no longer start because supervisord is trying to call python and python2, both of which are unavailable.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Include following commits:
- d061e27 [tunnelmgrd]: Warm boot support (#2166)
- 73ced6e Remove port serdes object before removing port (#2152)
- 6ac0b9b [CoPP] Add always_enabled field to coppmgr logic (#2034) (#2147)
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
Why I did it
support to collect version when purging debian package
Support to collect version multiple times
How I did it
Add the collection action before purging.
- Why I did it
With the previous MFT 4.18.1-16 there is a bug in mstdump tool accessing wrong address. it is confirmed this issue does not exist in official 4.18.0-106.
- How I did it
Update the MFT version to 4.18.0-106
- How to verify it
Run regression on Mellanox platforms
Why I did it
To fix issue #10152 for dx010.
202012 Warm upgrade causes lacp-teardown on Dx010 TOR. platform code initialize slow causing lacp timeout.
How I did it
Remove the python2 sonic platform wheel which is deprecated.
Optimize the dx010 sonic platform script to speed up the init process.
How to verify it
Check the warm reboot log, warm reboot is 8-9s faster than before.
Signed-off-by: Eric Zhu <erzhu@celestica.com>
#### Why I did it
```
Update submodule sonic-restapi
bd97dfe Fix urllib3 CVE-2021-33503 issue (#104)
f159bfa Upgrade the containers to be based on Debian Buster (#103)
a1830c1 (origin/201911) Fix OpenAPI spec to be readable by autorest (#101)
```
Why I did it
Radvd.conf.j2 template creates two copies of the vlan interface when there are more than one ipv6 address assigned to a single vlan interface. Changed the format to add prefixes under the same vlan interface block.
How I did it
Modifies radvd.conf.j2 and added unit tests
How to verify it
Configure multiple ipv6 address to the same vlan, start radvd
Unit test will check if radvd.conf with multiple ipv6 addresses is formed correctly
- Why I did it
4600C is using wrong thermal profile and it displays 2 CPU core thermal in show platform temperature output, there should be 4 CPU core thermal.
- How I did it
Change 4600C to use thermal profile 10.
- How to verify it
Manual test
This PR adds the following commits in sonic-platform-common
eb35c85[Credo][Ycable] Fix Credo firmware download API download_firmware flag (#269)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
This can save 6 sec for teamd LAG restoration - the time between:
```
Mar 9 13:51:10.467757 r-panther-13 WARNING teamd#teamd_PortChannel1[28]: Got SIGUSR1.
Mar 9 13:52:33.310707 r-panther-13 INFO teamd#teamd_PortChannel1[27]: carrier changed to UP
```
- Why I did it
Optimize warm boot. Specifically reduce the time needed for LAG restoration.
- How I did it
Kill teamd docker after graceful shutdown of teamd processes.
- How to verify it
Run warm reboot.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Advance sonic-utilities submodule to include the following changes
98de850 [muxcable][show] enhance show mux status to show last switchover time Azure/sonic-utilities#2067
3da82d1 [show][muxcable] fix the sudo access error for show muxcable metrics Azure/sonic-utilities#2083
7acbadb [build] stop vstest in the Azure pipeline Azure/sonic-utilities#2098
3fed440 [show][config] add muxcable command line support for retrieve / reset ICMP packet loss data Azure/sonic-utilities#2094
aa21e3a [202012] [counterpoll] Display the correct default poll interval for watermark counters Azure/sonic-utilities#2091
Signed-off-by: Neetha John <nejo@microsoft.com>
* Update container_checker for multi-asic devices
Update container_checker for multi-asic devices to add database containers in always_running_containers.
Previous change was made for single-asic, and that database containers were not considered as feature when writing to state_db.
* Update container_checker
Update an indent
Why I did it
To reduce the processing time of rc.local, refactoring s6100 platform initialization.
Fixing [warm-upgrade][202012] Slow DELL platform init in rc.local causes lacp-teardown #10150
How I did it
On branch 202012-s6100-rclocalChanges to be committed: (use "git restore --staged <file>..." to unstage)
modified: ../../../../files/image_config/platform/rc.local
modified: ../debian/platform-modules-s6100.install
modified: scripts/fast-reboot_plugin
modified: scripts/s6100_platform.sh
renamed: scripts/s6100_i2c_enumeration.sh -> scripts/s6100_platform_startup.sh
renamed: systemd/s6100-i2c-enumerate.service -> systemd/s6100-platform-startup.service
Why I did it
Add TSA/B/C dualtor support
Signed-off-by: Longxiang Lyu lolv@microsoft.com
How I did it
For TSA, toggle all the mux to standby if the device type is dualtor and there are active mux ports.
For TSC, add mux status output.
How to verify it
Run TSA/B/C on a dualtor setup
60f5237 (HEAD, origin/202012) [multi-asic]: Udpate to use SonicDBConfig from swsscommon (#219)
5c0d941 [201911][RFC1213]: Initialize lag oid map in reinit_data (#234)
Signed-off-by: Suvarna Meenakshi <sumeenak@microsoft.com>
The marvel-armhf build is hung, it does not exist after waiting for a long time.
It is caused by the process /etc/entropy.py which is started by the postinst script in target/debs/buster/sonic-platform-nokia-7215_1.0_armhf.deb
$ cat postinst
sh /usr/sbin/nokia-7215_plt_setup.sh
...
$ cat usr/sbin/nokia-7215_plt_setup.sh | tail
python /etc/entropy.py &
$ cat etc/entropy.py
if path.exists("/proc/sys/kernel/random/entropy_avail"):
while 1:
while avail() < 2048:
with open('/dev/urandom', 'rb') as urnd, open("/dev/random", mode='wb') as rnd:
d = urnd.read(512)
t = struct.pack('ii', 4 * len(d), len(d)) + d
fcntl.ioctl(rnd, RNDADDENTROPY, t)
time.sleep(30)
It is a workaround to fix the build issue, need to fix debian package, and revert the change.
Support saiserver v2 with python3 and thrift 0.13.0 (Cherry-picked from master #9509)
add variables to support the saiserverv2
build different thrift in saithrift depends on saiserver version
build differernt versions of saiserver
make the saiserver and saiserver docker with version number
test done:
build two different versions of sasiserver in local build environment
Co-authored-by: Richard.Yu <richard.yu@microsoft.com>
202012 version of #10119
Why I did it
If the VLAN interface is not up when ndppd starts, it will fail to enable allmulti mode on the interface and be unable to process received NDP packets
The following logs are seen:
/var/log/syslog.33.gz:Feb 18 10:33:12.825406 sonic INFO swss#/supervisord: ndppd (error) Failed to set allmulti: No such device
How I did it
Use the wait_for_link script currently used by radv to delay ndppd startup until the vlan interface is ready
How to verify it
Apply the changes to a device. config reload the device and confirm that the above error logs are not observed when ndppd starts. Run the arp/test_arp_dualtor.py::test_proxy_arp test case and verify it passes.
- Fixed SAI debian version name issue reported in Marvell sai package file name format issue Marvell-switching/sonic-marvell-binaries#62
- Implement DHCP, DHCv6 traps as per SAI Specifications
- Added support to return SAI_STATUS_NOT_SUPPORTED for ERSPAN feature [Nokia-7215] [marvell] orchagent exited when activating mirror_session #9830
Signed-off-by: Rajkumar Pennadam Ramamoorthy <rpennadamram@marvell.com>
4dc2d0a (HEAD -> 202012, origin/202012) Clear all data from DB table when the daemon stops (#228)
1df28d7 [ycabled] increase UT coverage of ycabled daemon (#238)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
- Why I did it
swsscommon.ConfigDBConnector does not automatically close connection when the instance is recycled by python. So, it should not create this instance each time calling check_services. It will cause error like Failed to read from file /var/run/hw-management/led/led_status_capability - OSError(24, 'Too many open files')
- How I did it
Only connect DB once in init
- How to verify it
Manual test
