Adding rule to ebtables to drop multicast packets in kernel. This was
done to address a bug where NS packets were flooding ports with
duplicate packets.
Signed-off-by: Nikola Dancejic <ndancejic@microsoft.com>
ix IPV6 forced-mgmt-route not work issue
Why I did it
IPV6 forced-mgmt-route not work
When add a IPV6 route, should use 'ip -6 rule add pref 32764 address' command, but currently in the template the '-6' parameter are missing, so the IPV6 route been add to IPV4 route table.
Also this PR depends on #17281 , which will fix the IPV6 'default' route table missing in IPV6 route lookup issue.
Microsoft ADO (number only):24719238
Disable eventd at buildtime for slim images
- Microsoft ADO **(number only)**:26386286
Add flags for disabling eventd and only copy rsyslog conf files when eventd is included and not slim image
Manual testing
Why I did it
Align the keywords to make qos configuration take effect
Work item tracking
Microsoft ADO (number only):
How I did it
Change the keyword to ComputeAI
How to verify it
reload minigraph and check the qos configuration
What I did:
In Chassis TSA mode Loopback0 Ip's of each LC's should be advertise through e-BGP peers of each remote LC's
How I did:
- Route-map policy to Advertise own/self Loopback IP to other internal iBGP peers with a community internal_community as define in constants.yml
- Route-map policy to match on above internal_community when route is received from internal iBGP peers and set a internal tag as define in constants.yml and also delete the internal_community so we don't send to any of e-BGP peers
- In TSA new route-map match on above internal tag and permit the route (Loopback0 IP's of remote LC's) and set the community to traffic_shift_community.
- In TSB delete the above new route-map.
How I verify:
Manual Verification
UT updated.
sonic-mgmt PR: sonic-net/sonic-mgmt#10239
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
What I did:
Added flag in sonic_version.yml to see if compiled image is secured or non-secured. This is done using build/compile time environmental variable SECURE_UPGRADE_MODE as define in HLD: https://github.com/sonic-net/SONiC/blob/master/doc/secure_boot/hld_secure_boot.md
This flag does not provide the runtime status of whether the image has booted securely or not. It's possible that compile time signed image (secured image) can boot on non secure platform.
Why I did:
Flag can be used for manual check or by the test case.
ADO: 24319390
How I verify:
Manual Verification
---
build_version: 'master-16191.346262-cdc5e72a3'
debian_version: '11.7'
kernel_version: '5.10.0-18-2-amd64'
asic_type: broadcom
asic_subtype: 'broadcom'
commit_id: 'cdc5e72a3'
branch: 'master-16191'
release: 'none'
build_date: Fri Aug 25 03:15:45 UTC 2023
build_number: 346262
built_by: AzDevOps@vmss-soni001UR5
libswsscommon: 1.0.0
sonic_utilities: 1.2
sonic_os_version: 11
secure_boot_image: 'no'
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
Why I did it
For some devices with small memory, after upgrading to the latest image, the available memory is not enough.
Work item tracking
Microsoft ADO (number only):
26324242
How I did it
Disable restapi feature for LeafRouter which with slim image.
How to verify it
verified on 7050qx T1 (slim image), restapi disabled
verified on 7050qx T0 (slim image), restapi enabled
verified on 7260 T1 (normal image), restapi enabled
Signed-off-by: Nazarii Hnydyn nazariig@nvidia.com
This improvement does not bring any warm-reboot degradation, since the database availability (tcp/ip access over the loopback interface) was fixed by these PRs:
Re-add 127.0.0.1/8 when bringing down the interfaces #15080
Fix potentially not having any loopback address on lo interface #16490
Why I did it
Removed dependency on interfaces-config.service to speed up the boot, because interfaces-config.service takes a lot of time on init
Work item tracking
N/A
How I did it
Changed service files for swss/syncd
How to verify it
Boot and check swss/syncd start time comparing to interfaces-config
Backport PR #17458 due to conflict.
Why I did it
Optimize syslog rate limit feature for fast and warm boot
Work item tracking
Microsoft ADO (number only):
How I did it
Optimize redis start time
Don't render rsyslog.conf in container startup script
Disable containercfgd by default. There is a new CLI to enable it (in another PR)
How to verify it
Manual test
Regression test
- Why I did it
Improve boot performance mostly needed for fast and warmboot
- How I did it
Use cached variable.
- How to verify it
Boot the system. Simply do "systemd-analyze blame" and look at service start time.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
- Why I did it
Improve boot performance mostly needed for fast and warmboot
- How I did it
Use cached variable.
- How to verify it
Boot the system. Simply do "systemd-analyze blame" and look at service start time.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Why I did it
Need to share docker image for telemetry and gnmi, and only use telemetry container for 202305 branch
Work item tracking
Microsoft ADO (number only):
How I did it
Add a new docker image, base-gnmi, build sonic-gnmi and sonic-telemetry on this docker image.
Enable telemetry container.
How to verify it
Run end to end test for telemetry and gnmi.
Change DHCP rate limit in SONiC copp configuration to 100 PPS as this is
necessary to ensure that DHCP flood does not cause LACP/BGP flaps in all
scenarios
This is an extension to the change in image_config: copp: Enable rate limiting
for bgp, lacp, dhcp, lldp, macsec and udld #14859 and sonic-mgmt change in
[tests/copp]: Update copp mgmt tests to support new rate-limits sonic-mgmt#8199
Why I did it
300 PPS is not sufficient to prevent LACP/BGP flaps in all cases. 100 PPS seems to
provide better resiliency against DHCP traffic flood to CPU.
Microsoft ADO 25776614:
Send DHCP broadcast packets to DUT and verify that they are trapped to CPU at 100 PPS.
Signed-off-by: Prabhat Aravind <paravind@microsoft.com>
Why I did it
Share docker image to support gnmi container and telemetry container
backport #16863
Work item tracking
Microsoft ADO 25423918:
How I did it
Create telemetry image from gnmi docker image.
Enable gnmi container and disable telemetry container by default.
How to verify it
Run end to end test.
Why I did it
Add the create_only_config_db_buffers attribute to the DEVICE_METADATA|localhost. If the "create_only_config_db_buffers" exists and is equal to "true" - the buffers will be created according to the config_db configuration (for example BUFFER_QUEUE|* table), otherwise the maximum available buffers (which are read from SAI) will be created, regardless of the CONFIG_DB buffers configuration.
Work item tracking
Microsoft ADO (number only):
How I did it
Add the create_only_config_db_buffers.json files for Mellanox devices (not MSFT SKU's), and inject the content to the CONFIG_DB during the swss docker container start.
How to verify it
Manual verification:
Install the image with this PR included on the not MSFT SKU switch
Check the show queue counters output and verify that only configured in CONFIG_DB buffers are created
root@sonic:/home/admin# show queue counters
Port TxQ Counter/pkts Counter/bytes Drop/pkts Drop/bytes
--------- ----- -------------- --------------- ----------- ------------
Ethernet0 UC0 0 0 0 N/A
Ethernet0 UC1 0 0 0 N/A
Ethernet0 UC2 0 0 0 N/A
Ethernet0 UC3 0 0 0 N/A
Ethernet0 UC4 0 0 0 N/A
Ethernet0 UC5 0 0 0 N/A
Ethernet0 UC6 0 0 0 N/A
Open the /usr/share/sonic/device/$DEVICE/$SKU/create_only_config_db_buffers.json and change it to:
"create_only_config_db_buffers": "false"
Do config reload
Check the show queue counters output and verify that all available buffers are created
root@sonic:/home/admin# show queue counters
Port TxQ Counter/pkts Counter/bytes Drop/pkts Drop/bytes
--------- ----- -------------- --------------- ----------- ------------
Ethernet0 UC0 0 0 0 N/A
Ethernet0 UC1 0 0 0 N/A
Ethernet0 UC2 0 0 0 N/A
Ethernet0 UC3 0 0 0 N/A
Ethernet0 UC4 0 0 0 N/A
Ethernet0 UC5 0 0 0 N/A
Ethernet0 UC6 0 0 0 N/A
Ethernet0 UC7 60 15346 0 N/A
Ethernet0 MC8 N/A N/A N/A N/A
Ethernet0 MC9 N/A N/A N/A N/A
Ethernet0 MC10 N/A N/A N/A N/A
Ethernet0 MC11 N/A N/A N/A N/A
Ethernet0 MC12 N/A N/A N/A N/A
Ethernet0 MC13 N/A N/A N/A N/A
Ethernet0 MC14 N/A N/A N/A N/A
Ethernet0 MC15 N/A N/A N/A N/A
Why I did it
Running SONiC releases past 202012 has become really challenging on system with small storage devices (4GB).
Some of these devices can also be limited by only having 4GB of RAM which complicates mitigations.
The main contributor to these issues is the SONiC image growth.
Being able to reduce it by some decent amount should allow these systems to run SONiC longer.
It would also reduce some impacts related to space savings mitigations.
Work item tracking
Microsoft ADO (number only):
How I did it
Add a build option to reduce the image size.
The image reduction process is affecting the builds in 2 ways:
change some packages that are installed in the rootfs
apply a rootfs reduction script
The script itself will perform a few steps:
remove file duplication by leveraging hardlinks
under /usr/share/sonic since the symlinks under the device folder are lost during the build.
under /var/lib/docker since the files there will only be mounted ro
remove some extra files (man, docs, licenses, ...)
some image specific space reduction (only for aboot images currently)
The script can later be improved but for now it's reducing the rootfs size by ~30%.
How to verify it
Compare the size of an image with this option enabled and this option enabled.
Expect the fully extracted content to be ~30% less.
Which release branch to backport (provide reason below if selected)
This is a backport of #16729
Description for the changelog
Add build option to reduce final image size
Why I did it
Enabling kdump by default for cisco-8000 by setting crashkernel cmdline arg in device installer.conf.
After bootup, sonic-kdump-config wipes crashkernel arg from /host/grub/grub.cfg, and resets USE_KDUMP in /etc/default/kdump-tools, so kdump will not be enabled on subsequent reboot.
How I did it
Setting kdump enable config as part of init_cfg.json for cisco-8000 platforms.
How to verify it
Install SONiC image with kdump enabled by default (device/hwsku/installer.conf), then reboot.
Kdump config should persist on subsequent reboots and kdump loaded during bootup
Signed-off-by: Aman Singhal <amans@cisco.com>
Why I did it
Networking devices need to be responsive. Such responsiveness is harmed when the CPU change state.
There is a latency penalty when a CPU is idle (e.g C2) and need to exit this state to come back to C1 state.
To prevent this from happening the CPU should be forced to remain in C1 state.
How I did it
Generalize the cstate forcing to C1 to all Arista products.
This is done by adding processor.max_cstate=1 to the kernel cmdline for all CPUs.
Additionally Intel CPUs also need intel_idle.max_cstate=0 to fallback to the acpi_idle driver.
How to verify it
Check that processor.max_cstate=1 is present on the cmdline for AMD CPUs
Check that both processor.max_cstate=1 and intel_idle.max_cstate=0 are present on the cmdline for Intel CPUs
Openssh in Debian Bullseye has been updated to 1:8.4p1-5+deb11u2 to fix CVE-2023-38408.
Since we're building openssh with some patches, we need to update our version as well.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* [swss] Chassis db clean up optimization and bug fixes
This commit includes the following changes:
- Fix for regression failure due to error in finding CHASSIS_APP_DB in
pizzabox (#PR 16451)
- After attempting to delete the system neighbor entries from
chassis db, before starting clearing the system interface entries,
wait for sometime only if some system neighbors were deleted.
If there are no system neighbors entries deleted for the asic coming up,
no need to wait.
- Similar changes for system lag delete. Before deleting the
system lag, wait for some time only if some system lag memebers were
deleted. If there are no system lag members deleted no need to wait.
- Flush the SYSTEM_NEIGH_TABLE from the local STATE_DB. While asic
is coming up, when system neigh entries are deleted from chassis ap
db (as part of chassis db clean up), there is no orchs/process running to
process the delete messages from chassis redis. Because of this, stale system
neigh are entries present in the local STATE_DB. The stale entries result in
creation of orphan (no corresponding data path/asic db entry) kernel neigh
entries during STATE_DB:SYSTEM_NEIGH_TABLE entries processing by nbrmgr (after
the swss serive came up). This is avoided by flushing the SYSTEM_NEIGH_TABLE from
the local STATE_DB when sevice comes up.
Signed-off-by: vedganes <veda.ganesan@nokia.com>
* [swss] Chassis db clean up bug fixes review comment fix - 1
Debug logs added for deletion of other tables (SYSTEM_INTERFACE and SYSTEM_LAG_TABLE)
Signed-off-by: vedganes <veda.ganesan@nokia.com>
---------
Signed-off-by: vedganes <veda.ganesan@nokia.com>
(cherry picked from commit b13b41fc22)
In #15080, there was a command added to re-add 127.0.0.1/8 to the lo
interface when the networking configuration is being brought down.
However, the trigger for that command is `down`, which, looking at
ifupdown2 configuration files, runs immediately after 127.0.0.1/16 is
removed. This means there may be a period of time where there are no
loopback addresses assigned to the lo interface, and redis commands will
fail.
Fix this by changing this to pre-down, which should run well before
127.0.0.1/16 is removed, and should always leave lo with a loopback
address.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Co-authored-by: Saikrishna Arcot <sarcot@microsoft.com>
#### Why I did it
To enable qos config for a certain backend deployment mode, for resource-type "Compute-AI".
This deployment has the following requirement:
- Config below enabled if DEVICE_TYPE as one of backend_device_types
- Config below enabled if ResourceType is 'Compute-AI'
- 2 lossless TCs' (2, 3)
- 2 lossy TCs' (0,1)
- DSCP to TC map uses 4 DSCP code points and maps to the TCs' as follows:
"DSCP_TO_TC_MAP": {
"AZURE": {
"48" : "0",
"46" : "1",
"3" : "3",
"4" : "4"
}
}
- WRED profile has green {min/max/mark%} as {2M/10M/5%}
This required template change <as in the PR> in addition to the vendor qos.json.j2 file (not included here).
### How I did it
#### How to verify it
- with the above change and the vendor config change, generated the qos.json file and verified that the objective stated in "Why I did it" was met
- verified no error
### Description for the changelog
Update qos_config.j2 for Comptue-AI deployment on one of backend device type roles
On S6100 we are seeing almost 100K interrupts per second on intels i801 SMBUS controller which affects systems performance.
We now disable the i801 driver interrupt and instead enable polling
Microsoft ADO (number only): 24910530
How I did it
Disable the interrupt by passing the interrupt disable feature argument to i2c-i801 driver
How to verify it
This fix is NOT applicable for ARM based platforms. Applicable only for intel based platforms:-
- On SN2700 its already disabled in Mellanox hw-mgmt
- Celestica DX010 and E1031
- Dell S6100 verified the interrupts are no longer incrementing.
- Arista 7260CX3
Signed-off-by: Prince George <prgeor@microsoft.com>
* [Mellanox] Update SDK/FW/SAI to 4.6.1020/2012.1020/SAIBuild2305.25.0.3 (#16096)
SONiC changes:
1. Support Spectrum4 ASIC FW binary building.
2. Support new SDK sx-obj-desc lib building since new SAI need it.
3. Remove SX_SCEW debian package from Mellanox SDK build since we are no longer using it (we use libxml2 instead).
4. Update SAI, SDK, FW to version 4.6.1020/2012.1020/SAIBuild2305.25.0.3
SDK/FW bug fixes
1. In SPC-1 platforms: Fastboot mode is not operational for Split port with Force mode in 50G speed
SFP modules are kept in disabled state after set LPM (low power mode) on/off for at least 3 minutes.
2. When preforming fast boot from an old SDK version (currently installed) to a newer one (target version), and the system was initially loaded with a new SDK version (past version), and the system has not been wiped, under specific conditions, the fast boot would use the past version's data and may fail.
SDK/FW Features
1. On SN2700 all ports can support y cable by credo
SAI bug Fixes
1. When creating an ACL rule with SAI_ACL_ENTRY_ATTR_FIELD_SRC_IP/SAI_ACL_ENTRY_ATTR_FIELD_DST_IP enabled, and then disabling the field by setting enable=false, a match on L3_type=IPv4 will remain programmed for the rule Issue resolved after the fix
2. Allow the max scale of virtual routers to be configure for SPC-1, SPC-2, SPC-3 when fastboot enable
3. Remove default hash key of SRC_MAC, DST_MAC and ETH_TYPE
SAI features
1. Port init profile
- How I did it
Update SDK/FW/SAI make files
- How to verify it
Run full sonic-mgmt regression on Mellanox platform
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Conflicts:
platform/mellanox/mlnx-sai.mk
* Fix issue: unprintable character is rendered when handling comments in j2
Use "{#-" and "-#}" to mark comments in jinja template
Signed-off-by: Stephen Sun <stephens@nvidia.com>
---------
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Co-authored-by: Stephen Sun <stephens@nvidia.com>
