- Why I did it
Update SDK/FW version - 4.5.3186/2010_3186 in order to have the following changes:
New functionality:
1. Added support for 6.5W (Class 8) in ports 49-50, 53-54, 57-58, and 61-62 on SN4600 system
Fix the following issues:
1. On very rare occasion (~1/100K), during I2C transaction with MMS1V50-WM and MMS1V90-WR modules on SN4700 system, the module may send unexpected stop which violate the I2C specification, possibly affecting the link up flow
2. When running 1GbE speeds on SN4600 system, the port remained active while peer side was closed
3. While toggling the cable with ‘sfputil lpmode on/off’, error msg like “ERR pmon#xcvrd: Receive PMPE error event on module 1: status {X} error type {y}” could be received
4. When toggling many ports of the Spectrum devices while raising 10GbE link up and link maintenance is enabled, the switch may get stuck and may need to be rebooted
5. When trying to reconfigure the Flex Parser header and Flex transition parameters after ISSU, the switch will returned an error even if the configuration was identical to that done before performing the ISSU
6. While moving from lossless to lossy mode while shared headroom was used, reduction of the shared headroom can only be done prior to pool type change and when shared headroom is not utilized
7. SLL configuration is missing in SDK dump
8. If TTL_CMD_COPY is used in Encap direction for a packet with no TTL, then the value passed in the ttl data structure will be used if non-zero (default 255 if zero)
9. PCI calibration changes from a static to a dynamic mechanism
10. Layer 4 port information is not initialized for BFD packet event. To address the issue, remote peer UDP port information was added in BFD packet event
11. SDK returned error when FEC mode is set on twisted pair, when FEC was set to None
- How I did it
Update pointer for the SDK/FW
- How to verify it
Run regression tests
Signed-off-by: dprital <drorp@nvidia.com>
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan arlakshm@microsoft.com
Why I did it
closes#12343
Today in SONiC the notify-keyspace-events is from DbInterface class when application try do any configdb set.
In Chassis the chassis_db may not get any configdb set operations, so there is chance this configuration will never be set.
So the chassis_db updates from one line card will not be propogated to other linecards, which are doing a psubscribe to get these event.
How I did it
update the redis.conf to set notify-keyspace-events AKE so that the notify-keyspace-events are set when the redis instance is started
How to verify it
Test on chassis
Signed-off-by: maipbui <maibui@microsoft.com>
#### Why I did it
`subprocess` is used with `shell=True`, which is very dangerous for shell injection.
#### How I did it
remove `shell=True`, use `shell=False`
Signed-off-by: maipbui <maibui@microsoft.com>
#### Why I did it
`getstatusoutput()` function from `subprocess` module has shell injection issue because it includes `shell=True` in the implementation
#### How I did it
Use `getstatusoutput_noshell()` from sonic_py_common library
#### How to verify it
Tested in DUT
Why I did it
Add the missing debian source bullseye-updates/buster-updates
The build failure as below, it is caused by the docker image debian:bullseye used the version 2.31-13+deb11u5, but the version only available in bullseye-update.
Why I did it
syseepromd in pmon crashes because of missing import in python script and doesn't get in running state
How I did it
Fix missing import issue to avoid python script failing
How to verify it
Boot system and wait till syseepromd gets into running state
* Fix CVE-2022-37032 on FRR submodule
Patch was cherry picked from FRRouting/frr repo - d8d77d3733bc299ed5dd7b44c4d464ba2bfed288
* Fix CVE-2022-37032 on FRR submodule
Patch was cherry picked from FRRouting/frr repo - d8d77d3733bc299ed5dd7b44c4d464ba2bfed288
* Update patch version number
Signed-off-by: maipbui <maibui@microsoft.com>
#### Why I did it
`os` - not secure against maliciously constructed input and dangerous if used to evaluate dynamic content
#### How I did it
Replace `os` by `subprocess`
Why I did it
Issue was caused by this #11341
*.bin image structure in 202205:
vkarri@19d5638dde2d:/sonic$ ls -l /tmp/tmp.9ibWSipeRw/installer/x86_64/
total 12
drwxr-xr-x 2 vkarri dip 12288 Oct 14 13:16 platforms
However install.sh which runs on ONiE parition expects the platform specific kernel cmd line conf file under platform/$onie_platform_string file https://github.com/sonic-net/sonic-buildimage/blob/master/installer/install.sh#L102
Thus, any platform which defines and depends on these params might be broken on master label.
How I did it
Since we are already filtering the conf files based on TARGET_PLATFORM in build_image.sh, i've just updated the location to installer/platforms instead of installer/$arch/platforms
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
* Fix to improve hostname handling
If config_db.json is missing hostname entry, hostname-config.sh ends
up deleting existing entry too and hostname changes to default 'localhost'
* default hostname to 'sonic` if missing in config file
Why I did it
Add the original docker tag without username to support some of the docker file not changed build broken issue.
The username suffix only required when the native build feature enabled, but if not enabled, the docker file not necessary to change, the build should be succeeded.
It is to support cisco 202205 build.
#### Why I did it
Update sonic-host-services submodule to include below commits:
```
bc8698d Merge pull request #21 from abdosi/feature
557a110 Fix the issue where if dest port is not specified in ACL rule than for multi-asic where we create NAT rule to forward traffic from Namespace to host fail with exception.
6e45acc (master) Merge pull request #14 from abdosi/feature
4d6cad7 Merge remote-tracking branch 'upstream/master' into feature
bceb13e Install libyang to azure pipeline (#20)
82299f5 Merge pull request #13 from SuvarnaMeenakshi/cacl_fabricns
15d3bf4 Merge branch 'master' into cacl_fabricns
de54082 Merge pull request #16 from ZhaohuiS/feature/caclmgrd_external_client_warning_log
b4b368d Add warning log if destination port is not defined
d4bb96d Merge branch 'master' into cacl_fabricns
35c76cb Add unit-test and fix typo.
17d44c2 Made Changes to be Python 3.7 compatible
978afb5 Aligning Code
1fbf8fb Merge remote-tracking branch 'upstream/master' into feature
7b8c7d1 Added UT for the changes
91c4c42 Merge pull request #9 from ZhaohuiS/feature/caclmgrd_external_client
7c0b56a Add 4 test cases for external_client_acl, including single port and port range for ipv4 and ipv6
b71e507 Merge remote-tracking branch 'origin/master' into HEAD
d992dc0 Merge branch 'master' into feature/caclmgrd_external_client
bd7b172 DST_PORT is configuralbe in json config file for EXTERNAL_CLIENT_ACL
f9af7ae [CLI] Move hostname, mgmt interface/vrf config to hostcfgd (#2)
70ce6a3 Merge pull request #10 from sujinmkang/cold_reset
29be8d2 Added Support to render Feature Table using Device running metadata. Also added support to render 'has_asic_scope' field of Feature Table.
3437e35 [caclmgrd][chassis]: Add ip tables rules to accept internal docker traffic from fabric asic namespaces.
8720561 Fix and add hardware reboot cause determination tests
0dcc7fe remove the empty bracket if no hardware reboot cause minor
e47d831 fix the wrong expected result comparision
ef86b53 Fix startswith Attribute error
8a630bb fix mock patch
8543ddf update the reboot cause logic and update the unit test
53ad7cd fix the mock patch function
7c8003d fix the reboot-cause regix for test
1ba611f fix typo
25379d3 Add unit test case
a56133b Add hardware reboot cause as actual reboot cause for soft reboot failed
c7d3833 Support Restapi/gnmi control plane acls
f6ea036 caclmgrd: Don't block traffic to mgmt by default
a712fc4 Update test cases
adc058b caclmgrd: Don't block traffic to mgmt by default
06ff918 Merge pull request #7 from bluecmd/patch-1
e3e23bc ci: Rename sonic-buildimage repository
e83a858 Merge pull request #4 from kamelnetworks/acl-ip2me-test
f5a2e50 [caclmgrd]: Tests for IP2ME rules generation
```
Update openssh make file, add missing dependency to libnl.
#### Why I did it
Openssh indirectly depends on libnl.
Another PR #12447 need add new patch to openssh, after adding new patch to openssh, PR build failed with libnl missing error.
#### How I did it
Update openssh make file, add missing dependency to libnl.
#### How to verify it
Pass all test case
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
#### Description for the changelog
Update openssh make file, add missing dependency to libnl.
#### Ensure to add label/tag for the feature raised. example - PR#2174 under sonic-utilities repo. where, Generic Config and Update feature has been labelled as GCU.
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->
#### A picture of a cute animal (not mandatory but encouraged)
aedc05ecf [QoS] Support dynamic headroom calculation for Barefoot platforms (#2306)
7f4da26f2 [app_ext] [auto-ts] Add available_mem_threshold option (#2423)
b25070176 YANG Validation for ConfigDB Updates: Fix Decorator Bug (#2405)
f62d1e596 [watermarkstat] Add new warning message for the 'q_shared_multi' counters (#2408)
25fda264e [chassis]Add fabric counter cli commands (#1860)
ae97e597e Update sonic command doc to add CLIs relative to SONiC fips (#2377)
abd5eba49 [generate_dump]: Enhance show techsupport for cisco-8000 platform (#2403)
ee15b74a2 Include configuring laser frequency and tx power (#2437)
70be50cdc Add a subcommand to display a hexdump of transceiver EEPROM page (#2379)
c246801ba Filter port invalid MTU configuration (#2378)
362ec9bd7 [show] vnet advertised-route command (#2390)
2372e2983 [show priority-group drop counters] Remove backup with cached PG drop counters after 'config reload' (#2386)
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
This fixes the following error
```
admin@sonic:~$ sudo fwutil show status
mount: /mnt/onie-fs: special device /dev/sda2
does not exist.
Error: Command '['mount', '-n', '-r', '-t', 'ext4', '/dev/sda2\n', '/mnt/onie-fs']' returned non-zero exit status 32.. Aborting...
Aborted!
admin@sonic:~$ sudo vi /usr/local/lib/python3.9/dist-packages/sonic_platform/
```
Seems like #11877 the rstrip('\n') was removed. Probably by mistake.
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Why I did it
Fix the issue that test plan can't be canceled by KVM dump stage
How I did it
Fix the issue that test plan can't be canceled by KVM dump stage
Signed-off-by: maipbui <maibui@microsoft.com>
#### Why I did it
When updating the container from Buster to Bullseye in azure pipelines in sonic-utilities repo, the build checker failed due to missing one of the dependencies in libswsscommon
```
+ sudo dpkg -i libswsscommon_1.0.0_amd64.deb
Selecting previously unselected package libswsscommon.
(Reading database ... 196324 files and directories currently installed.)
Preparing to unpack libswsscommon_1.0.0_amd64.deb ...
Unpacking libswsscommon (1.0.0) ...
dpkg: dependency problems prevent configuration of libswsscommon:
libswsscommon depends on libboost-serialization1.71.0; however:
Package libboost-serialization1.71.0 is not installed.
dpkg: error processing package libswsscommon (--install):
dependency problems - leaving unconfigured
Processing triggers for libc-bin (2.31-13+deb11u4) ...
Errors were encountered while processing:
libswsscommon
```
#### How I did it
Update the libboost-serialization dependency to a specific version that >= 1.71
#### How to verify it
Verified locally, build sonic-utilities successfully with this version
Why I did it
#4021 describes an issue that is still being observed on master image whereby sensord does not start in pmon due to missing service.
How I did it
Updated the lm-sensors install patch with a case for systemd
How to verify it
Verified that sensord is up in pmon after boot
Co-authored-by: Boyang Yu <byu@arista.com>
- Skip the interface status check if the interface does not exist. In the future, when the interface is created/comes up this check will be triggered again.
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
fix linecard provisioning issue (500 error)
fix some value types for get_system_eeprom_info API
refactor code to leverage pci topology (enabling dynamic Pcie plugin)
refactor asic declaration logic to new style
misc fixes
Fixing issue FRRouting/frr#11108
For interface based peers with peer-groups, "no neighbor capability extended-nexthop" gets added by default. This will result in IPv4 routes not having ipv6 next hops.
- How I did it
Porting the commit FRRouting/frr@8e89adc to FRR 8.2.2 which fixes the issue
- How to verify it
Load FRR and verify if the "no neighbor capability extended-nexthop" not gets added for interfaces associated with peer-groups
- Why I did it
A new SKU for MSN4700 Platform i.e. Mellanox-SN4700-V16A96
Requirements:
Breakout:
Port 1-24: 4x25G(4)[10G,1G]
Port 25-28: 2x100G[200G,50G,40G,25G,10G,1G]
Port 29-32: 2x200G[100G,50G,40G,25G,10G,1G]
Downlinks: 96 (1-24) + 4 (25-28)
Uplinks: 4 (29-32)
Shared Headroom: Enabled
Over Subscribe Ratio: 1:4
Default Topology: T0
Default Cable Length for T1: 5m
VxLAN source port range set: No
Static Policy Based Hashing Supported: No
Additional Details:
QoS params: The default ones defined in qos_config.j2 will be applied
Small Packet Percentage: Used 50% for traditional buffer model Note: For dynamic model, the value defined in LOSSLESS_TRAFFIC_PATTERN|AZURE|small_packet_percentage is used
SKU was drafted under the assumption that the downlink ports uses xcvr's that will only support the first 4 lanes of the physical port they are connected to. Hence for the ports 1-24, the last four lanes are not used
Cable Lengths used for generating buffer_defaults_{t0,t1}.j2 values
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
- Why I did it
Update sonic-platform-common submodule pointer to include the following:
Read CMIS data path state duration (#312)
Remove shell=True (#313)
[credo][ycable] remove mux-toggle inprogress flags for some API's (#311)
[Cdb fw upgrade (#308)
[Credo][Ycable] enhancement and error exception for some APIs (#303)
[ycable] add definitions of some new API's for Y-Cable infrastructure (#301)
Install libyang to azure pipeline (#310)
Update the return of update_firmware for the image not exist case (#306)
[CMIS] 'get_transceiver_info' should return 'None' when CMIS cable EEPROM is not ready (#305)
uplift code coverage 80% (#307)
[sonic-pcie] Add UT for pcie_common.py (#293)
[CMIS] Catch Exception to avoid CMIS code crash (#299)
[Credo][Ycable] fix incorrect uart statistics (#296)
Add PSU input voltage and input current (#295)
- How I did it
Advance sonic-platform-common pointer
Signed-off-by: dprital <drorp@nvidia.com>
- Why I did it
Update sonic-sairedis submodule pointer to include the following:
2585a1f [Support gearbox SAI_PORT_ATTR_PORT_SERDES_ID on vs (#1082)
fd9bc84 [SAI NAT aging notification (#987)
3fa8f34 [[doc]: Update README.md (#1122)
157e573 [[lgtm] Fix libyang missing in lgtm validation issue (#1135)
af80caa Add Voqs to Virtual Switch (#1061)
f9008ad [fastboot] fastboot enhancement: Use warm-boot infrastructure for fast-boot (#1100)
- How I did it
Advance sonic-sairedis pointer
Signed-off-by: dprital <drorp@nvidia.com>
- Why I did it
Barefoot uses hysteresis, instead of 'xon-threshold'. 'xon' is only
supported in static mode, so there is a need to add this attribute
to every mode in PG profile init file
- How I did it
'xon_offset' was added to pg_profile_lookup.ini
- How to verify it
Install and basic sanity tests including traffic.
Checked with:
pfcwd/test_pfc_config.py pfcwd/test_pfcwd_all_port_storm.py
pfcwd/test_pfcwd_function.py pfcwd/test_pfcwd_war_reboot.py
pfc_asym/test_pfc_asym.py
Signed-off-by: Mariusz Stachura <mariusz.stachura@intel.com>
Signed-off-by: Mariusz Stachura <mariusz.stachura@intel.com>
Why I did it
Revert change in syslog such that it does not utilize c++ string
How I did it
Code change
How to verify it
Which release branch to backport (provide reason below if selected)
201811
201911
202006
202012
202106
202111
202205
Description for the changelog
Ensure to add label/tag for the feature raised. example - PR#2174 under sonic-utilities repo. where, Generic Config and Update feature has been labelled as GCU.
Link to config_db schema for YANG module changes
A picture of a cute animal (not mandatory but encouraged)
Signed-off-by: Mariusz Stachura <mariusz.stachura@intel.com>
What I did
Adding the dynamic headroom calculation support for Barefoot platforms.
Why I did it
Enabling dynamic mode for barefoot case.
How I verified it
The community tests are adjusted and pass.
co-authorized by: jianquanye@microsoft.com
Migrate the t0 and t1-lag test jobs in buildimage repo to TestbedV2.
Why I did it
Migrate the t0 and t1-lag test jobs in buildimage repo to TestbedV2.
How I did it
Migrate the t0 and t1-lag test jobs in buildimage repo to TestbedV2.
