* Subscribe to both ConfigDB and AppDB
to get notifications to apply LLDP port config
* the operstate file is not consistent
Removing this since it is not serving any purpose
* Remove check for PortInitDone and PortConfigDone
This is not prteset in Config DB
* Remove checking State DB for port creation
* Check for key to be present before fetching it
* Addressing review comments
Integrating official Mellanox SDK/FW release as a pre condition for getting new Mellanox SAI release with hash changes (inner field) and 3k VXLAN scale. As well as bug fix for Spectrum LP mode and Spectrum 2 PFC WD
Signed-off-by: Mykola Faryma <mykolaf@mellanox.com>
In case of going from previous iteration of SONiC, and the last reboot
was hardware, REBOOT_CAUSE_FILE may not be present and the service may
throw an error.
- Make sure that migrated DB contents persisted for next boot
- Make sure that db saved after warm reboot.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
Define slave_base_tag_ref variable in Makefile.work containing
specific base image tag to use, rather than always defaulting
to :latest.
Add an ARG command before FROM statement in Dockerfile.user
for sonic-slave and sonic-slave-stretch. ARG variable defaults
to latest if slave_base_tag_ref not specified in Makefile.work.
The presumption to always refer to the :latest tagged Docker base
image when creating the user image causes problems in a shared
build server environment, where the most recently created base
image (i.e. the current :latest tag) may not be compatible with
the current build. For example, different users working in
different branches may all be sharing the same build server.
Signed-off-by: Greg Paussa greg.paussa@broadcom.com
- What I did
Added a DOCKER_AVOID_BASE_TAG_LATEST build option to rules/config that forces the Docker user image creation to refer to its base image by a specific tag rather than rely on the :latest tag. This is needed in a shared build server environment where builds from different developers and/or different SONiC branches all converge on the same Docker daemon instance running on the build server. The :latest tag is always assigned to the most recent base image built, which might not correspond to the base image needed for a particular build, thus causing various build errors that mostly manifest as missing Debian packages or package version mismatches.
NOTE TO REVIEWERS: This PR relies on Docker support of "ARG before FROM," which was first introduced in Docker version 17.05.1-ce. Although there is no mention of a minimum required Docker version for the build server in the SONiC Building Guide pages, please consider whether it is reasonable to assume that Docker 17.05.1-ce or later must be used for SONiC build hosts before approving this PR.
- How I did it
Added an ARG before the FROM statement at the top of the sonic-slave/Dockerfile.user and sonic-slave-stretch/Dockerfile.user files. The ARG variable defaults to latest, but can be overridden in Makefile.work to reference the SLAVE_BASE_TAG so that it refers to the specific, matching base image for the build. This override is activated by un-commenting the DOCKER_AVOID_BASE_TAG_LATEST = y line in rules/config.
* fix the memory leak in on_pmpe. objects created via sx_api having convention new_<type_name> should be release explicitly via delete_<type_name>.
* avoid duplicate code.
- What I did
Configure sshd to close all SSH connetions after 15 minutes of inactivity.
- How I did it
Set ClientAliveInterval to 900 (900 seconds = 15 minutes) and ClientAliveCountMax to 0
in /etc/ssh/sshd_config using augtool in build_debian.sh. In the process, I refactored the existing augtool command for sshd_config so as to add comments and empty lines to file for readability.
- How to verify it
Log into device via management port. Wait 15 minutes without sending a keystroke -- you should be automatically logged out.
* fix the issue Bug SW #1816356 which is due to failing to test whether dom supported prior to reading dom data
* use pre-defined variable to avoid magic number.
no need to read 16 bytes, 1 byte is enough since calibration and dom capability are all in bytes at offset 92
Variables SFP_VLOT_OFFSET and QSFP_VLOT_OFFSET containing the typo are originally defined in repo sonic-platform-common. The typo has been fixed in PR #33. However, some Mellanox-specific code hasn't updated correspondingly, which results in xcvrd fail to start.
This PR updates the variable name in Mellanox-specific code correspondingly to fix that.
* new platform api, chassis part
* Inject mlnx mlx libs to platform monitor
* address the review comments
* remove some confusing naming.
* Adjust the minor cause to a more human-readable way when rebooted by firmware
* address review comments
* expose host dir /host/reboot-cause to pmon docker so that the reboot causing by user command can be identified
* 1. Revert "expose host dir /host/reboot-cause to pmon docker so that the reboot causing by user command can be identified"
Since the only hardware-causing reboot should be handled by get_reboot_cause and the logic of handling reboot cause is about to move to the host side, no need to mount this dir to pmon docker.
This reverts commit 3feb96869d.
2. adjust log output by using sonic_daemon_base.daemon_base.Logger.
3. remove the logic of verifying /host/reboot-cause/ files.
4. fix typo.
* implement get_firmware_version and adjust the interfaces regarding components' version retrieving according to the Azure/sonic-platform-common#34
* Added debug symbols to many debug dockers.
* For debug images *only*:
1) Archive source files into debug image
2) Archived source is copied into /src
3) Created an empty dir /debug
4) Mount both /src as ro & /debug as rw into every docker
5) Login banner will give some details on /src & /debug
6) Devs can copy core file into /debug and view it from inside a container.
7) Dev may create all gdb logs and other data directly into /debug.
* Dropped redundant REDIS_TOOLS per review comments.
* Added debug symbols to frr package and hence FRR based BGP docker.
* 1) Moved dbg_files.sh to scripts/
2) Src directories to archive are now collected from individual Makefiles.
3) Added few more debug symbols
4) Added few more debug dockers.
Here after no more changes except per review comments.
To debug:
Install required version of debug image in Switch or VM.
Copy core file into /debug of host
Get into Docker
gdb /usr/bin/<daemon> -c /debug/<your core file>
set directory /src/... <-- inside gdb to get the source
For non-in-depth debugging:
Download corresponding debug Docker image (docker-...-dbg.gz) to your VM
Load the image
Run image with entrypoint as 'bash' with dir containing core mapped in.
Run gdb on the core.
* sonic-device-data: update SAI config checker for Broadcom TD3 and TH3
The following properties have been approved by the Broadcom chip arch team:
l3_alpm_ipv6_128b_bkt_rsvd
ifp_inports_support_enable
pll_bypass
dpr_clock_frequency
device_clock_frequency
port_flex_enable
mmu_port_num_mc_queue
serdes_core_rx_polarity_flip_physical{<PORT>}
serdes_core_tx_polarity_flip_physical{<PORT>}
Signed-off-by: Dante (Kuo-Jung) Su <dante.su@broadcom.com>
Change-Id: I1c6239cddfb0582a9298e671d792a32f79e4f006
* [ARISTA] adding 7060_cs32s to eMMC exclusions
Following PR 2774 we added the 7060-cx32s according to the guidelines of
PR 2780
This adds the 7060-cx32s to the list f devices that mount /var/log as a
tmpfs to mitigate eMMC wearout
Signed-off-by: Michel Moriniaux <m.moriniaux@criteo.com>
* [ARISTA] adding 7060_cs32s to eMMC exclusions
Following PR 2774 we added the 7060-cx32s according to the guidelines of
PR 2780
This adds the 7060-cx32s to the list f devices that mount /var/log as a
tmpfs to mitigate eMMC wearout
Signed-off-by: Michel Moriniaux <m.moriniaux@criteo.com>
