Why I did it
dplane_fpm_nl is a new FPM implementation in FRR. The old plugin fpm will not have any new features implemented. Usage of the new plugin gives us ability to use BGP suppression feature and next hop groups in the future.
How I did it
Switch to dplane_fpm_nl zebra plugin from old fpm plugin which is not supported anymore
Remove stale patches for old fpm plugin and add similar patches for dplane_fpm_nl
How to verify it
Build and run on the switch.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Why I did it
fix DX010 fan drawer and watchdog platform test case issues
How I did it
1. Add fan_drawer get_maximum_consumed_power support
2. Adjust maximum watchdog timeout value check
How to verify it
Run test_fan_drawer and test_watchdog test cases.
Why I did it
Upgrade both Centec X86 and ARM64 platform containers(syncd/saiserver/syncd-rpc) to bullseye
Optimize Centec X86 platform makefile, change sdk.mk to sai.mk
How I did it
Modify Makefile and Dockerfile to use bullseye
Change filename form sdk.mk to sai.mk, optimize and modify related files
How to verify it
For Centec X86 platform, compile the code with : a) make configure PLATFORM=centec; b) make all
For Centec ARM64 platform, cmpile the code with: a) make configure PLATFORM=centec-arm64 PLATFORM_ARCH=arm64; b) make all
Verifiy the sonic-centec.bin and sonic-centec-arm64.bin on Centec chip based board.
- Why I did it
In to-sonic and multi-asic KVM-test, pretest sometimes failed. Reason is rsyslogd process can not start in teamd container. Because rsyslog.conf is empty caused by sonic-cfggen execute failed
- How I did it
If sonic-cfggen -d execute failed, execute without -d because the template file has the default value.
- How to verify it
Build image and test it over 40 times, all passed pretest.
Signed-off-by: Chun'ang Li <chunangli@microsoft.com>
- Why I did it
Added YANG model as part of Generic Hash feature development
- How I did it
Added YANG model and UTs
- How to verify it
make configure PLATFORM=mellanox
make target/sonic-mellanox.bin
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
- Why I did it
Added platform specific script to be invoked during SAI failure dump. Added some generic changes to mount /var/log/sai_failure_dump as read write in the syncd docker
- How I did it
Added script in docker-syncd of mellanox and copied it to /usr/bin
- How to verify it
Manual UT and new sonic-mgmt tests
Why I did it
LED driver changed due to introduction of FPGA support. The PDDF parser and APIs need to be updated. In turn the common platform APIs also require changes.
How I did it
Changed the get/set status LED APIs for PSU, fan and fan_drawer.
Changed the color strings to plain color name. e.g. 'STATUS_LED_COLOR_GREEN' has been changed to 'green'
Added support for LED color get operation via BMC
How to verify it
Verified the new changes on Accton AS7816-64X platform.
root@sonic:/home/admin#
root@sonic:/home/admin# show platform summary
Platform: x86_64-accton_as7816_64x-r0
HwSKU: Accton-AS7816-64X
ASIC: broadcom
ASIC Count: 1
Serial Number: AAA1903AAEV
Model Number: FP3AT7664000A
Hardware Revision: N/A
root@sonic:/home/admin#
root@sonic:/home/admin# show ver |more
SONiC Software Version: SONiC.master.0-dirty-20230111.010655
Distribution: Debian 11.6
Kernel: 5.10.0-18-2-amd64
Build commit: 3176b15ae
Build date: Wed Jan 11 09:12:54 UTC 2023
Built by: fk410167@sonic-lvn-csg-006
Platform: x86_64-accton_as7816_64x-r0
HwSKU: Accton-AS7816-64X
ASIC: broadcom
ASIC Count: 1
Serial Number: AAA1903AAEV
Model Number: FP3AT7664000A
Hardware Revision: N/A
Uptime: 09:24:42 up 4 days, 22:45, 1 user, load average: 1.97, 1.80, 1.51
Date: Mon 23 Jan 2023 09:24:42
Docker images:
REPOSITORY TAG IMAGE ID SI
ZE
docker-orchagent latest 63262c7468d7 38
5MB
root@sonic:/home/admin#
root@sonic:/home/admin#
root@sonic:/home/admin# pddf_ledutil getstatusled LOC_LED
off
root@sonic:/home/admin# pddf_ledutil getstatusled DIAG_LED
green
root@sonic:/home/admin#
root@sonic:/home/admin#
root@sonic:/home/admin# pddf_ledutil setstatusled DIAG_LED red
True
root@sonic:/home/admin# pddf_ledutil getstatusled DIAG_LED
red
root@sonic:/home/admin#
root@sonic:/home/admin#
root@sonic:/home/admin#
root@sonic:/home/admin# pddf_ledutil setstatusled DIAG_LED amber
Invalid color
False
root@sonic:/home/admin# pddf_ledutil getstatusled DIAG_LED
red
root@sonic:/home/admin#
root@sonic:/home/admin#
root@sonic:/home/admin# pddf_ledutil setstatusled DIAG_LED green
True
root@sonic:/home/admin# pddf_ledutil getstatusled DIAG_LED
green
root@sonic:/home/admin#
root@sonic:/home/admin#
root@sonic:/home/admin#
root@sonic:/home/admin# pddf_ledutil getstatusled LOC_LED
off
root@sonic:/home/admin# pddf_ledutil setstatusled LOC_LED amber
True
root@sonic:/home/admin# pddf_ledutil getstatusled LOC_LED
amber
root@sonic:/home/admin# pddf_ledutil setstatusled LOC_LED off
True
root@sonic:/home/admin# pddf_ledutil getstatusled LOC_LED
off
root@sonic:/home/admin#
Why I did it
Some of the platform vendors use FPGA in the HW design. This FPGA is connected to the CPU via I2C bus. Adding a common module and a driver to be used for such FPGA in PDDF.
How I did it
Added 'pddf_fpgai2c_module' and 'pddf_fpgai2c_driver' kernel modules which takes the platform dependent data from PDDF JSON files and creates an I2C client for the FPGA.
How to verify it
Any platform having such an FPGA and brought up using PDDF would use these kernel modules. The detail representation of such a device in PDDF JSON file is covered in the HLD.
Update sonic-sairedis submodule pointer to include the following:
* 0434b62 [sai_failure_dump]Invoking dump during SAI failure ([#1198](https://github.com/Azure/sonic-sairedis/pull/1198))
Signed-off-by: dgsudharsan <sudharsand@nvidia.com>
Add YANG model for SYSTEM_PORT.
Resolves https://github.com/sonic-net/sonic-buildimage/issues/12458
#### Why I did it
YANG model for SYSTEM_PORT in CONFIG_DB was missing.
#### How I did it
Added new YANG model and associated unit tests.
#### How to verify it
Passing unit tests
* Add support for platform topology configuration service
This service invokes the platform plugin for platform specific topology
configuration.
The path for platform plugin script is:
/usr/share/sonic/device/$PLATFORM/plugins/config-topology.sh
If the platform plugin is not available, this service does nothing.
Signed-off-by: anamehra <anamehra@cisco.com>
Why I did it
By specifying 'status_led' 'controllable' to false for psu section, it means the platform is not yet supporting psu status led
How I did it
specify 'status_led' 'controllable' to false for psu section
How to verify it
by running test in pdb, manually add {'status_led' : {'controllable' : False}} in dictionary
this flag will be able to get False and skip testing:
ce290c735d/tests/platform_tests/api/test_psu.py (L337)
[swss-common] update submodule (#13579)
```
6b6842a [NotificationProducer] add pipeline support (#708)
2cb5ea0 Increase the netlink buffer size from 3MB to 16MB. (#739)
dacbdad RedisPipeline ignore flush when call dtor from another thread. (#736)
```
issue #13395
Fix a bug about sudo failure.
/usr/local/share/buildinfo/scripts/buildinfo_base.sh: line 24: sudo: command not found
Fix an issue about warning message.
./scripts/run_with_retry: line 4: [: : integer expression expected
After upgrade to brcmsai 8.1, the sdk running environment (container) recommended with mininum memory size as below
TH4/TD4(ltsw) uses 512MB
TH3 used 300MB
Helix4/TD2/TD3/TH/TH 256 MB
Base on this requirement, adjust the default syncd share memory size and set the memory size for special ACISs in platform_env.conf file for different types of Broadcom ASICs.
How I did it
Add the platform_env.conf file if none of it for broadcom platform (base on platform_asic file)
Add the 'SYNCD_SHM_SIZE' and set the value
for ltsw(TD4/TH4) devices set to 512M at least (update the platform_env.conf)
for Td2/TH2/TH devices set to 256M
for TH3 set to 300M
verify
How to verify it
verify the image with code fix
Check with UT
Check on lab devices
On a problematic device which cannot start successfully
Run with the command
$ cat /proc/linux-kernel-bde
Broadcom Device Enumerator (linux-kernel-bde)
Module parameters:
maxpayload=128
usemsi=0
dmasize=32M
himem=(null)
himemaddr=(null)
DMA Memory (kernel): 33554432 bytes, 0 used, 33554432 free, local mmap
No devices found
$ docker rm -f syncd
syncd
$ sudo /usr/bin/syncd.sh start
Cannot get Broadcom Chip Id. Skip set SYNCD_SHM_SIZE.
Creating new syncd container with HWSKU Force10-S6000
a4862129a7fea04f00ed71a88715eac65a41cdae51c3158f9cdd7de3ccc3dd31
$ docker inspect syncd | grep -i shm
"ShmSize": 67108864,
"Tag": "fix_8.1_shm_issue.67873427-9f7ca60a0e",
On Normal device
$ docker inspect syncd | grep -i shm
"ShmSize": 268435456,
"Tag": "fix_8.1_shm_issue.67873427-9f7ca60a0e"
change the config syncd_shm.ini to b85=128m
$ docker rm -f syncd
syncd
$ sudo /usr/bin/syncd.sh start
Creating new syncd container with HWSKU Force10-S6000
3209ffc1e5a7224b99640eb9a286c4c7aa66a2e6a322be32fb7fe2113bb9524c
$ docker inspect syncd | grep -i shm
"ShmSize": 134217728,
"Tag": "fix_8.1_shm_issue.67873427-9f7ca60a0e",
change the config under
/usr/share/sonic/device/x86_64-dell_s6000_s1220-r0/Force10-S6000/platform_env.conf
and run command
$ cat /usr/share/sonic/device/x86_64-dell_s6000_s1220-r0/platform_env.conf
SYNCD_SHM_SIZE=300m
$ sudo /usr/bin/syncd.sh start
Creating new syncd container with HWSKU Force10-S6000
897f6fcde1f669ad2caab7da4326079abd7e811bf73f018c6dacc24cf24bfda5
$ docker inspect syncd | grep -i shm
"ShmSize": 314572800,
"Tag": "fix_8.1_shm_issue.67873427-9f7ca60a0e",
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
Why I did it
Currently the config cli of dhcpv4 is may cause confusion and config of dhcpv6 is missing.
How I did it
Add dhcp_relay config cli and test cases.
config dhcp_relay ipv4 helper (add | del) <vlan_id> <helper_ip_list>
config dhcp_relay ipv6 destination (add | del) <vlan_id> <destination_ip_list>
Updated docs for it in sonic-utilities: https://github.com/sonic-net/sonic-utilities/pull/2598/files
How to verify it
Build docker-dhcp-relay.gz with and without INCLUDE_DHCP_RELAY, and check target/docker-dhcp-relay.gz.log
Eariler the SDK stat polling was erroneously set to once every msec
which is far more frequent than required by SWSS. The new setting, which
is consistent with other vendor SKUs, is once a second. The net result
is reduced CPU MHz by syncd.
- Why I did it
fixes#12907
When the management interface IP address configuration changes from dynamic to static the DNS configuration (retrieved from the DHCP server) in /etc/resolv.conf remains uncleared. This leads to a DNS configuration pointing to the wrong nameserver. To make the behavior clear DNS configuration received from DHCP should be cleared.
- How I did it
Use resolvconf package for managing DNS configuration. It is capable of tracking the source of DNS configuration and puts the configuration retrieved from the DHCP servers into a separate file. This allows the implementation of DNS configuration cleanup retrieved from DHCP during networking reconfiguration.
- How to verify it
Ensure that the management interface has no static configuration.
Check that /etc/resolv.conf has DNS configuration.
Configure a static IP address on the management interface.
Verify that /etc/resolv.conf has no DNS configuration.
Remove the static IP address from the management interface.
Verify that /etc/resolv.conf has DNS configuration retrieved form DHCP server.
Why I did it
github action will report error on forked repos. It is not by design.
keep 'Approved for xxx branch' label in auto cherry pick workflow.
How I did it
Disable github action on folked repos.
Keep 'approved for xxx' label in auto cherry pick workflow.
How to verify it
Which release bra
- Why I did it
Add new ACL key BTH_OPCODE and AETH_SYNDROME
- How I did it
Add new ACL key BTH_OPCODE and AETH_SYNDROME
- How to verify it
manual test
unit test
Includes below commits
```
0d5e68f5a [GCU] Ignore bgpraw table in GCU operation (#2628)
22757b1f3 Add interface link-training command into the CLI doc (#2257)
f4f857e10 [GCU] Ignore bgpraw in GCU applier (#2623)
b5ac60036 [muxcable][config] Add support to enable/disable ceasing to be an advertisement interface when `radv` service is stopped (#2622)
981f9531e [chassis][voq] Add "show fabric reachability" command. (#2528)
fba87f43f Revert (#2599)
d6d7ab37f [warm-reboot] Use kexec_file_load instead of kexec_load when available (#2608)
db4683d40 fix show techsupport error (#2597)
3d8e9c62d [GCU] Prohibit removal of PFC_WD POLL_INTERVAL field (#2545)
163e766cc [techsupport] include APPL_STATE_DB dump (#2607)
8703773eb YANG Validation for ConfigDB Updates: RADIUS_SERVER (#2604)
c2d746d4f Remove TODO comment which is no longer relevant (#2600)
f09da9983 [show] Add bgpraw to show run all (#2537)
39ac5641b Extend fast-reboot STATE_DB entry timer (#2577)
```
Fixes#12408
Why I did it
We are running into #12408 very frequently.
This results in no syslogs from any containers as rsyslog server could not start.
some of the sonic-mgmt scripts look for log statements and error out if log is not present.
Interfaces-config service configures the loopback interface along with other interfaces. rsyslog-config reads ip address of loopback interface and generates /etc/rsyslog.conf. When this race condition happens, lo interface ip is not yet programmed and rsyslog-config ends up writing UDP server as null in /etc/rsyslog.conf.
How I did it
rsyslog-config service is started after interfaces-config service.
How to verify it
Did multiple reboots and verified that $UDPServerAddress is valid.
Adding /usr/local/bin/storyteller to READ_ONLY_CMDS. So no write access or prompt for password is needed to run storyteller.
Tested on 202205 clusters, user who didn't request write access was able to grep log using storyteller.
sign-off: Jing Zhang zhangjing@microsoft.com
Why I did it
[FIPS] Upgrade Open-SymCrypt version to 0.6
Improve the SymCrypt performance
Support to download the debug packages from storage account in version 0.6.
How I did it
Upgrade to symcrypt-openssl from version 0.4 to version 0.6
Changes in https://github.com/sonic-net/sonic-fips:
0c29b23 Upgrade the submodules: SymCrypt and SymCrypt-OpenSSL #40
80022f3 Fix the ARM64 build failure
2e76a3d Disable the unsupported tests
Other changes will be added as well:
55b8e0a Merge pull request #35 from xumia/change-license
120c1a7 Upgrade SymCrypt and SymCrypt-OpenSSL
2f9c084 Merge pull request #39 from liuh-80/dev/liuh/update-openssh-version
a3be6c5 Revert openssh version
e02fa1e Update fips version
How to verify it
Update sonic-platform-common submodule head to include:
38a7a65 mihirpat1 Wed Jan 25 09:49:05 2023 -0800 Change get_tx_bias return type to list (sonic-net/sonic-platform-common#342)
ecb7dde qinchuanares Sat Jan 21 11:24:37 2023 -0800 add SOP ROC in bulk status (sonic-net/sonic-platform-common#341)
Signed-off-by: Mihir Patel <patelmi@microsoft.com>
- Why I did it
To include latest fixes and new functionality
SDK/FW
1. Fixed bug in recovery mechanism in case of I2C error when trying to access the XSFP module.
2. On the NVIDIA Spectrum-2 switch, when receiving a packet with Symbol Errors on ports that are configured to cut-thought mode, a pipeline might get stuck.
3. On the Spectrum-2 and Spectrum-3 switch, if you enable ECN marking and the port is in split mode, traffic sent to the port under congestion (for example, when connecting two ports with a total speed of 50GbE to a single 25GbE port) is not marked.
4. Modifying existing entry/Adding new one when switch is at its maximum capacity (full by maximum allowed entries from any type such as routes, FDB, and so forth), will fail with an error.
5. When many ports are active (e.g., 70 ports up), and the configuration of shared buffer is applied on the fly, occasionally, the firmware might get stuck.
6. When a system has more than 256 ACL rules, on rare occasion, removing/adding rules may cause some ACL rules not to work.
7. On SN2201 system, on RJ45 port, the link might appear in 'down' state even if it operations properly.
8. Layer 4 port information is not initialized for BFD packet event. To address the issue, remote peer UDP port information was added in BFD packet event.
9. When setting LAG as a SPAN analyzer, the distributor mode of the LAG members was not taken into account. It may happen that the LAG member with distributor mode disabled will be set as a SPAN analyzer port.
- How I did it
Updated SDK/SAI submodule and relevant makefiles with the required versions.
- How to verify it
Build an image and run tests from "sonic-mgmt".
Signed-off-by: Volodymyr Samotiy <volodymyrs@nvidia.com>
- Why I did it
To improve ASIC FW upgrade logging and have information about the cause of FW update failure in the log.
- How I did it
Added syslog logger support
In case the FW update has failed the update tool will give the cause of the failure in the output in the last line, starting with "Fail".
When running the tool, in case of a failed update, we will parse the output to retrieve the cause and log it.
Device #1:
----------
Device Type: ConnectX6DX
Part Number: MCX623106AN-CDA_Ax
Description: ConnectX-6 Dx EN adapter card; 100GbE; Dual-port QSFP56; PCIe 4.0/3.0 x16;
PSID: MT_0000000359
PCI Device Name: /dev/mst/mt4125_pciconf0
Base GUID: 0c42a103007d22d4
Base MAC: 0c42a17d22d4
Versions: Current Available
FW 22.32.0498 22.32.0498
PXE 3.6.0500 3.6.0500
UEFI 14.25.0015 14.25.0015
Status: Forced update required
---------
Found 1 device(s) requiring firmware update...
Device #1: Updating FW ...
FSMST_INITIALIZE - OK
Writing Boot image component - OK
Fail : The Digest in the signature is wrong
- How to verify it
mlnx-fw-upgrade.sh --upgrade
Add script usage and more information to script description being printed in help option.
- Why I did it
Missing information in script description in help option.
- How I did it
Expand script description and add script usage.
- How to verify it
Run the script with -h option.
Changing the default config knob value to be True for killing radv, due to the reasons below:
Killing RADV is to prevent sending the "cease to be advertising interface" protocol packet.
RFC 4861 says this ceasing packet as "should" instead of "must", considering that it's fatal to not do this.
In active-active scenario, host side might have difficulty distinguish if the "cease to be advertising interface" is for the last interface leaving.
6.2.5. Ceasing To Be an Advertising Interface
shutting down the system.
In such cases, the router SHOULD transmit one or more (but not more
than MAX_FINAL_RTR_ADVERTISEMENTS) final multicast Router
Advertisements on the interface with a Router Lifetime field of zero.
In the case of a router becoming a host, the system SHOULD also
depart from the all-routers IP multicast group on all interfaces on
which the router supports IP multicast (whether or not they had been
advertising interfaces). In addition, the host MUST ensure that
subsequent Neighbor Advertisement messages sent from the interface
have the Router flag set to zero.
sign-off: Jing Zhang zhangjing@microsoft.com
#### Why I did it
Improve naming convention for bgp notification events and change type of leaf for sonic-events-host mem usage from uint64 to decimal64
#### How I did it
Replace "-" with "_"
Replace uint64 with decimal64
#### How to verify it
Run yang model unit tests
#### Description for the changelog
Change YANG model leaf naming convention for bgp notification
#### Why I did it
Segfault was occuring when running memory_checker
#### How I did it
Deinit publisher immediately after publishing
#### How to verify it
Manual testing
Why I did it
Update Nokia sonic-platform submodule
81a9c77 [Supervisor] Modifed the get_description to fix the name for Nokia-IXR7250E-SUP-10 card.
e49ddfb Fix the LedContorlCommon to get the physical index from port mapping
dd143f1 [module] modify the chassis.py and module.py to allow supervisor to retrieve the line card eemprom info
How I did it
Update Nokia sonic-platform submodule
81a9c77 [Supervisor] Modifed the get_description to fix the name for Nokia-IXR7250E-SUP-10 card.
e49ddfb Fix the LedContorlCommon to get the physical index from port mapping
dd143f1 [module] modify the chassis.py and module.py to allow supervisor to retrieve the line card eemprom info
How to verify it
On supervisor, "show chassis module status" should show Nokia-IXR7250E-SUP-10 instead of Nokia-IXR7250-SUP-10
Signed-off-by: mlok <marty.lok@nokia.com>
How I did it
radv sends a good-bye packet when the service is stopped, which causes a IPv6 route update on SoC side. And this update leads to an interface bouncing and causes traffic disruption even though the ToR device might already be isolated.
This PR is to mitigate the traffic disruption issue during planned maintenance, by killing radv instead of stopping. So the cease packet won't be sent.
How to verify it
Verified on dev clusters:
Traffic disruption was no longer reproducible.
radv took the killing path
if knob was off, radv would take the stopping path
sign-off: Jing Zhang zhangjing@microsoft.com
*Critical process for database-chassis is redis-chassis but critical_process contains hard-coded
to `redis` program always. Instead using jinja2 template to render critical process list based on database docker type. redis-chassis for database-chassis docker and redis for regular database docker.
Why I did it
This PR is an enhancement of PR #13105
Because the input string of AttachTo for ACL table can appear in both port name group and port alias group, I added a logic to determine whether the string should be port name or port alias
If all the input strings belong to port name group, then we treat all of them as port name
If all the input strings belong to port alias, then we treat all of them as port alias
If all the input string belongs to both port alias group and port name group, we prefer port alias. The behavior is as before.
How I did it
Walk through all port names/alias in the input to make a decision.
How to verify it
Verified by adding UT.
a931d6c Prince George Wed Jan 18 19:10:55 2023 -0800 [Xcvrd]: Fix optics insertion/removal not detected (#333)
2211b7e mihirpat1 Wed Jan 18 16:00:22 2023 -0800 Xcvrd should restart if any child thread crashes (#326)
753b550 judyjoseph Tue Jan 17 13:10:09 2023 -0800 Chassisd do an explicit stop of the config_manager (#328)
879d630 Tal Berlowitz Fri Jan 6 01:57:42 2023 +0200 Fix bug where transceiver info is missing after port breakout change (#329)
e119b69 Junchao-Mellanox Tue Dec 13 19:54:49 2022 +0800 Remove TODO comments which are no longer needed (#325)
Signed-off-by: Mihir Patel <patelmi@microsoft.com>
