Commit Graph

185 Commits

Author SHA1 Message Date
Joe LeVeque
d1c9b0cb77 [boot] Start ntp-config service after all Docker containers are started (#2303) 2018-11-28 00:12:03 -08:00
Ying Xie
873df9d8e8
[bde driver] black list linux_kernel_bde driver (#2284)
This driver should be loaded by sonic service. If kernel tries to load
it, the driver would be loaded with default parameters, which is not
right for sonic.

Signed-off-by: Ying Xie <ying.xie@microsoft.com>
2018-11-21 08:08:37 -08:00
Joe LeVeque
f126000cc9
[sudoers] Add 'SONIC_CLI_IFACE_MODE' to env_keep to ensure variable is made available to sudo calls (#2249) 2018-11-15 15:16:06 -08:00
Ying Xie
5cff136951 [console speed] lock console speed to start up speed (#1734)
Auto negotiating console speed could cause sonic to lock on a wrong
speed under rare conditions. The only way to come out of the wrong
speed is to issue line break or restart console service with forced
speed, or reboot sonic.

Lock down the console speed to avoid these situations.

Signed-off-by: Ying Xie <ying.xie@microsoft.com>
2018-11-01 15:12:22 -07:00
Taoyu Li
2897686de8
[updategraph] Use empty configuration when DHCP graphurl option is missing (#2185) 2018-10-29 12:16:00 -07:00
Joe LeVeque
1e1add90f9
Remove Arista-specific service ACL solution; All platforms now use caclmgrd (#2202) 2018-10-29 10:25:18 -07:00
Wenda Ni
09ae9a8965 In the case of upgrade, have pfcwd enabled on the upgraded sonic (#2192)
Signed-off-by: Wenda <wenni@microsoft.com>
2018-10-26 09:13:45 -07:00
Shuotian Cheng
7313e7d9bc [teamd]: Add teammgrd in docker-teamd (#2064)
Remove the teamd.j2 templates used for starting the teamd. Add
teammgrd instead to manage all port channel related configuration
changes. Remove front panel port related configurations in
interfaces.j2 templates as well.

Remove teamd.sh script and use teammgrd to start all the teamd
processes. Remove all the logics in the start.sh script as well.

Update the sonic-swss submodule.

Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
2018-10-19 03:41:53 -07:00
Taoyu Li
2a24a303ec [tacplus nss conf] tacplus should be before compat (#2163) 2018-10-18 12:42:24 -07:00
Taoyu Li
018b5899be [updategraph] add support to use preset config instead of default minigraph (#2050)
* [updategraph] add support to use preset config instead of default minigraph

* Fix variable case

* Remove default minigraph case

* Remove default minigraphs and add default_sku files
2018-09-21 22:01:10 -07:00
Taoyu Li
47c9542c63 Don't reuse init_cfg.json from old image during upgrade (#2036) 2018-09-11 21:26:51 -07:00
Shuotian Cheng
9413fa9a7b
[interfaces]: Move IP/MTU information from interfaces file into database (#1908)
- Move front panel ports and port channels MTU and IP configurations out of
the current /etc/network/interfaces file and store them in the configuration
database.

- The default MTU value for both front panel ports and the port channels is
9100. They are set via the minigraph or 9100 by default.

- Introduce portmgrd which will pick up the MTU configurations from the
configuration database.

- The updated intfmgrd will pick up IP address changes from the configuration
database.

- Update sonic-swss submodule

Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
2018-08-20 11:19:16 -07:00
Joe LeVeque
98082d56a0 [baseimage]: Download picocom version 3.1-2 from stretch-backports; No longer build from source (#1946) 2018-08-17 17:38:20 -07:00
lguohan
f3ca7c422f
[rsyslog]: use # to separate container name and program name in syslog message (#1918)
Previously use / to separate container name and program name.

However, in rsyslogd:

Precisely, the programname is terminated by either (whichever occurs first):

end of tag
nonprintable character
‘:’
‘[‘
‘/’
The above definition has been taken from the FreeBSD syslogd sources.

Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-08-12 22:23:58 -07:00
Guohan Lu
4d701ad037 [baseimage]: update base image from jessie to stretch 2018-08-11 09:07:59 +00:00
Joe LeVeque
7aefa185d4 Download newer version (8.23.0-2) of rsyslog from jessie-backports in hopes of eliminating memory leaks (#1912) 2018-08-09 23:56:41 -07:00
Taoyu Li
530e2dc4e1
Only keep most recent one in old_config (#1884) 2018-07-31 12:50:54 -07:00
Sagar Balani
5011622c6f [platform]: bfn intf: allow-hotplug for usb0 interface (#1889) 2018-07-30 09:54:05 -07:00
Sagar Balani
93905d3d82 [barefoot]: Support for platforms based on Barefoot Networks' device (#1796)
* Initial commit

* Add Ingrasys S9180-32X platform dirver.

Signed-off-by: Wade He <chihen.he@gmail.com>

* Add bfn.service for init barefoot.

Signed-off-by: Wade He <chihen.he@gmail.com>

* [Barefoot Beta] Add some functions and fixed some bugs.

1. Update sensors.conf.
2. Fixed IO expander init.
3. Fixed PSU EEPROM.
4. Fixed MB EEPROM.
5. Add fancontrol and fan init.
6. Add SYS LED control (sys, fan, fan tray).
7. 2.5V compute and setup max and min.
8. Fixed typo MB eeprom delete address.
9. Remove coretemp to BMC.
10. Add active CPLD.
11. Modify SFP+ GPIO slave address.
12. Modify tmp75 Near Port 32 slave address.

Signed-off-by: Wade He <chihen.he@gmail.com>

* Add bfn script in /etc/init.d/

Signed-off-by: Wade He <chihen.he@gmail.com>

* Add bfn service in debian

Signed-off-by: Wade He <chihen.he@gmail.com>

* Fixed CPLD switch LED behavior.

Signed-off-by: Wade He <chihen.he@gmail.com>

* [Barefoot Beta] Fixed sensors and hwmon order.
1. Fixed ignore sensors Vbat.
2. Reorg hwmon order.

Signed-off-by: Wade He <chihen.he@gmail.com>

* Fixed PSU1 and PSU2 EEPROM order.

Signed-off-by: Wade He <chihen.he@gmail.com>

* initial barefoot checkin october 2017

* update refpoint

* update refpoints

* update refpoints to bf-master

* update refpoint

* update refpoint to tested version

* change to platform from asic

* update refpoint for swss

* revert core creation setting

* update refpoints

* add telnet for debug shell

* update refpoints 11/17/17

* missed change in file on previous merge

* [CPLD] Fixed blink LED issue.

* Fixed blink LED mask set error.

Signed-off-by: Wade He <chihen.he@gmail.com>

* Update bf_kdrv.c for 6.0.2.39

* Update bf kernel driver

* Add bf_fun kernel module.

* Update bf_tun for fixed build error

* merge with Azure master (12/12/17)

* update swss refpoint

* update refpoint of swss

* library dependency for stack unroll

* update refpoint to bf-master

* [DHCP relay]: Fix circuit ID and remote ID bugs (#1248)

* [DHCP relay]: Fix circuit ID and remote ID bugs

* Set circuit_id_len after setting circuit_id_len to ip->name

* [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272)

* Add I2C CPLD kernel module for psuutil.
 * Support psuutil script.
 * Add voltage min and max threshold.
 * Update sensors.conf for tmp75.

Signed-off-by: Wade He <chihen.he@gmail.com>

* Allow multi platform support - infra (more changes to follow)

* update relative path to include platform for clarity

* [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274)

- What I did
Add switch ASIC vendor: Nephos
Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X

- How I did it
Add platform/nephos files
Add platform/nephos/sonic-platform-modules-ingrasys submodule
Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files
Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files
Add SONiC to support Nephos platform
Update Head of submodule src/sonic-sairedis to "3b817bb"

- How to verify it
To build SONiC installer image and docker images, run the following commands:

make configure PLATFORM=nephos
make target/sonic-nephos.bin
Check system and network feature is worked as well

- Description for the changelog
Add switch ASIC vendor and platforms for Nephos

- A picture of a cute animal (not mandatory but encouraged)

Signed-off-by: Sam Yang <yang.kaiyu@gmail.com>

* change source of files to github (from dropbox), update sairedis refpoint

* update refpoint of sairedis

* [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board   (#1269)

* [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287)

* update sairedis (fast-boot refpoint)

* fix syncd rpc make files

* update refpoint to handle Makefile change (no functional change)

* [Marvell]: Add support for SLM5401-54x device (#1307)

* Marvell's updates for SONiC.201712 & SAI v1.0
* [Platform] Add Marvell's SLM5401-54x for branch 201712

* [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321)

- update Arista 7050-QX32S config.bcm file
- update Accton th-as771*-32x100G.config.bcm files

* update refpoint for Makefile chnage in sairedis

* update refpoint - sairedis

* update sairedis to older refpoint till we debug clean build

* export asic platform for build

* update refpoint for makefiles

* [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332)

* Upload wnc-osw1800

* Modify for Barefoot suggest

* Revert bfn-platform.mk

* Update bfn-platform-wnc.mk

Update parameter name

* Update parameter name

* initial support for WNC platform

* change switch name to "switch"

* Delete bf modules for rel_7_0

* Add Ingrasys S9180 platform

Signed-off-by: Wade He <chihen.he@gmail.com>

* Modify bfnsdk for Ingrasys S9180 platform

Signed-off-by: Wade He <chihen.he@gmail.com>

* Resolved the conflict.

* Resolved the conflict.

* Update submodule path and url.

* Delete unused file.

* Update PSU GPIO and EEPROM for psuutil.

* Add psuutil in S9180-32X

Signed-off-by: Wade He <chihen.he@gmail.com>

* update refpoint

* update refpoint

* change contact email, update refpoint

* cleanup and update kernel modules

* updates based on review

* update refpoint

* update refpoint

* fix typo in config script to check for platforms

* remove stale file

* resolve conflicts

* cleanup diffs with Azure repo and update SDK debs

* update refpoints to Azure

* address review comments

* revert refpoint of swss-common

* porting the build fix from master

* porting build fix from master

* Minor Fix

* Minor fix

* Temp to sde deb packages url

* Update sonic - sairedis,swss & swss-common refpoints

* Update git modules url path to bfn repo

* updated paths for swss, swss-common & sairedis

* Update refpoint for sonic-swss to local bfn repo

* Update URL for downloading sde debian packages

* porting fix links of debian git server from master

* porting fix links of debian git server from master

* [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC

* Update ref points for swss, swss-common and sairedis repos

* Add sonic platform scripts for bfn montara/maverick

* Call sh scripts instead of calling py scripts

* Address upstream PR Comments (#10)

* Update bf-master with azure/master
* Undo changes to some files

* Revert "Address upstream PR Comments (#10)"

This reverts commit a7fddb83ca.

* Address upstream comments (#11)

* Remove all non bfn specific changes from upstream PR

* Revert "Address upstream comments (#11)"

This reverts commit 559132103e.

* Undo non bfn changes

* Little more cleanup

* Add back code removed in merge

* export CONFIGURED_PLATFORM

* Update sairedis and swss refpoints

* Address Upstream PR comment

* change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64

* Set default tx queue len for usb0 interface to 64

* Update sairedis refpoint

* Update swss ref point

* Add bfn buffer cfg files for montara/maverick as per new design

* Update buffer cfg templates for bfn montara

* add non zero size to buffer profile
* add macro to generate port lists

* Update buffer cfg templates for bfn mavericks

* add non zero size for buffer profiles
* add port generation macro

* Add missing psmisc package

* BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions.
Adding psmisc to resolve this issue.

* Update swss ref point

* Update swss ref point

* Update sairedis refpoint

* Update sairedis refpoint

* Update sairedis refpoint

* Update sairedis refpoint

* Update refpoint for sairedis and swss

* sairedis to azure master
* swss to latest bfn bf-master

* Update gitmodules

Update url for sairedis to azure master

* Correct typo in bfn platform script

* Update swss and sairedis ref points

* Update swss ref point

* Address Review comments

* Update swws path in gitmodules to azure master
* update swss refpoint
* update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR)

* Fix sairedis refpoint broken in by previous merge

* Remove psmisc from docker base image

* This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session.
Will fix this in a seperate PR. Need this for SONIC upstreaming

* Address upstream comments

* Remove bmc interface from interface jinja template and sample output interfaces file
* Add bmc interface at boot time to network interfaces for bfn bmc based platforms

* Remove autogen ingrasys debian files

* Revert "Remove autogen ingrasys debian files"

* Buffer and qos config template fix for bfn platforms (#21)

SWI-1509 Buffer and qos config template fix for bfn platforms

* Fix qos config files for montara & mavericks (#22)

* Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs

* Fix vs test (#23)
2018-07-24 10:23:12 -07:00
Andriy Moroz
dadc17d9e6 [Mellanox] Use MAC from EEPROM for PortChannels and VLAN Interfaces (#1793)
* Use MAC from EEPROM for PortChannels

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Use MAC from EEPROM in DEVICE_METADATA

Will affect MAC for VLAN interfaces

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Get MAC via decode-syseeprom

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* hw-management is now a service

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Add error handling for MAC fetch process

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>
2018-07-23 15:51:03 -07:00
Joe LeVeque
2ccfefc919
[caclmgrd] Add a rule to allow all connections from localhost (#1858) 2018-07-13 10:27:47 -07:00
Joe LeVeque
301fc282a7 Add initial support for keeping track of and displaying reboot cause (#1812)
* [rc.local] Move all constants and functions to top of file; Unify style; Reword messages

* Add function to process reboot cause upon boot

* Simplify retrieval of SONIC_VERSION per comments

* Change wording
2018-06-28 05:29:14 -07:00
Taoyu Li
b745c0bf1b Modify sudo lecture message to be more informational (#1800) 2018-06-21 10:41:50 -07:00
Taoyu Li
7557007761 [interface-config] Force eth0 before reconfiguration (#1802) 2018-06-21 10:40:28 -07:00
Denis Maslov
d82db79051 [caclmgrd] Translation of ACL Control Plane rules into iptables commands fixed (#1798)
Signed-off-by: Denis Maslov <Denis.Maslov@cavium.com>
2018-06-19 21:14:49 -07:00
Joe LeVeque
711be8f7da [caclmgrd] Heuristically determine whether ACL is IPv4 or IPv6, use iptables/ip6tables accordingly (#1767)
* [caclmgrd] Heuristically determine whether ACL is IPv4 or IPv6, use iptables/ip6tables accordingly

* Check all rules in table until we find one with a SRC_IP
2018-06-05 03:24:30 -07:00
Qi Luo
eee36719ea
Revert the feature: serial port watchdog service (#1766)
* Revert "[serial watchdog] remove serial watchdog service dependency to rc.local (#1752)"
* Revert "[service] introducing serial port watchdog service (#1743)"
2018-06-04 21:06:58 -07:00
Ying Xie
c1057177d9
[serial watchdog] remove serial watchdog service dependency to rc.local (#1752)
* [serial watchdog] remove serial watchdog service dependency to rc.local

When restarting this service in rc.local, the dependency causes an error
in syslog. Removing the dependency to mute the error log entry.

* remove lines with empty inputs
2018-05-30 18:29:43 -07:00
Taoyu Li
225b3e5b91
Fix a bug that default graph might be missing when generating minimal config (#1747) 2018-05-29 13:46:25 -07:00
Ying Xie
bb6ff62a32
[service] introducing serial port watchdog service (#1743)
* [rc.local] refactor platform identification code to separate function

Signed-off-by: Ying Xie <ying.xie@microsoft.com>

* [rc.local] infrastructure to take action according to installer.conf

* [serial port watchdog] add service to watch serial port processes

Monitor serial port processes. Kill ones stuck for too long.

Signed-off-by: Ying Xie <ying.xie@microsoft.com>

* [rc.local] start watchdog on serial port specified by installer.conf

Signed-off-by: Ying Xie <ying.xie@microsoft.com>
2018-05-25 10:52:35 -07:00
lguohan
76d9de5d8e
[fast-reboot]: support encoded & gzipped minigraph in fast reboot (#1716)
* [fast-reboot]: support encoded & gzipped minigraph in fast reboot

Signed-off-by: Guohan Lu <gulv@microsoft.com>

* add acl.json and snmp.yml into fast-reboot

Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-05-16 10:04:17 -07:00
Andriy Moroz
f3426e32dc Decrease usable space in log partition to 90% (#1648)
95 is too close to the edge because by default 5% is already reserved for super-user

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>
2018-04-30 11:18:56 -07:00
Prince Sunny
3993e58d1d [updategraph]: Keep updategraph service active after start (#1651) 2018-04-26 15:27:20 -07:00
Joe LeVeque
242f86d2dc [cli]: Update sudoers file to ensure no 'show' commands prompt for sudo password (#1632)
* [sonic-utilities] Update submodule

* Update sudoers file to ensure no 'show' commands prompt for sudo
2018-04-23 13:43:16 -07:00
Taoyu Li
8153ce7f05
[sudoer] Enable read-only commands for all users (#1558) 2018-04-19 11:25:08 -07:00
Joe LeVeque
c626dc921f
Allow one Service ACL to bind to multiple services (#1576)
* [caclmgrd] Also ignore IP protocol if found in rule; we will only use our predefined protocols
2018-04-10 18:14:12 -07:00
lguohan
11b0cd93e8
[baseimage]: bring down eth0 before restart networking (#1555)
cfggen generates new eth0 configuration. Need to first
clean existing configuration on eth0 before bring up
new configuration on eth0. Thus, we need to first bring
down eth0 before putting new configuration into /etc/network/
interfaces

Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-04-01 21:36:43 -07:00
Taoyu Li
208ca43760
[hostcfgd] Fix a bug that tacacs key is wrongly modified (#1536) 2018-03-28 10:55:59 -07:00
Taoyu Li
4daf002859 [updategraph] Remove pending_initialization flag after first boot (#1538) 2018-03-28 09:06:48 -07:00
Jipan Yang
f74de8914b [telemetry]: SONiC system telemetry Support (#1526)
* SONiC system telemetry Support

Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>

* Update package name from telemetry to sonic-telemetry

Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
2018-03-27 13:39:04 -07:00
padmanarayana
dba35eebb1 [baseimage]: Updategraph during NOS->SONiC migration (#1521) 2018-03-23 15:16:54 -07:00
lguohan
56efb41f55
[image]: remove quote for build_version in /etc/sonic/sonic_version.yml (#1512)
commit 0965b33 added quote to build_version in /etc/sonic/sonic_version.yml,
e.g., sonic_version : '20170104.10'. scripts to use the $sonic_version need
to remove the quote.

Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-03-19 00:53:47 -07:00
Taoyu Li
e84e093dea
Move all minigraph-related action from rc.local to updategraph (#1452)
- Move all minigraph-related action from rc.local to updategraph
- updategraph service is now after database. All feature services are now after and depending on updategraph
2018-03-09 17:17:08 -08:00
padmanarayana
02b62ac9bb [fast-reboot]: Support OS9 -> SONiC fast-reboot migration (#1414)
* Support OS9 -> SONiC fast-reboot migration

* Address review comments. Update NOS mac in EEPROM and net.rules for eth0

* Address review comments. Update sonic-platform-modules-dell to fac81d...

* Fix script for POSIX compliance
2018-03-08 16:42:41 -08:00
Taoyu Li
09f2385a15 [hostcfgd/tacacs] obfuscate tacacs credentials in syslog (#1444) 2018-03-02 21:24:01 -08:00
lguohan
a9d2e13627
[image]: prevent password related command into syslog (#1450)
* [image]: prevent password related command into syslog
2018-03-02 21:21:25 -08:00
nikos-li
5a0e42307f [baseimage]: Suppress sonic WARNING rsyslogd-2007: action 'action 6' suspended syslog message (#1400) 2018-02-22 19:32:18 -08:00
Taoyu Li
04b694454a
[sonic-cfggen] Remove machine.conf info and add get_system_mac support (#1397)
[sonic-cfggen] Remove machine.conf info and add get_system_mac support
2018-02-20 14:38:13 -08:00
lguohan
f657df7588
[baseimage]: enable auto logout for console (ttyS*) sessions (#1398) 2018-02-20 09:36:54 -08:00
Joe LeVeque
6ccd1601b8
Modify Arista service ACL solution to listen to ACL changes in ConfigDB (#1385) 2018-02-12 11:10:01 -08:00
byu343
ecf5c8d311 ssh and snmp allow list (#1363)
- Service ACL framework for Arista platforms
2018-02-08 17:43:52 -08:00
Ying Xie
2b48886eec
[config] activate qos configuration only when buffers configuration exists (#1378) 2018-02-07 13:38:09 -08:00
Ying Xie
58c479d3af
[boot] log rc.local execution in syslog (#1375) 2018-02-06 14:59:15 -08:00
Joe LeVeque
162089dd9e
[caclmgrd] Prevent service from blocking system boot indefinitely (#1362) 2018-02-01 15:15:39 -08:00
Andriy Moroz
58d8302b53 Buffers configuration update on port speed change (#1345)
* Move buffer configuration to ConfigDB

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Converted Dell and Arista configs

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Add buffer configs for ACS-MSN2740

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Updated buffers template

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Fixed j2 unit test

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Update buffers config for Force10-S6100

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Update VS docker to support speed and buffers test

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Update buffers config generation

- fixed support of sonic-to-sonic install

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Update submodules pointers for buffers config

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>
2018-01-29 08:11:05 -08:00
Ying Xie
2b91c9681d Revert "Buffers configuration update on port speed change (#1250)" (#1340)
This reverts commit 814e50fd5e.
2018-01-26 10:13:43 -08:00
Andriy Moroz
814e50fd5e Buffers configuration update on port speed change (#1250)
* Move buffer configuration to ConfigDB

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Converted Dell and Arista configs

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Add buffer configs for ACS-MSN2740

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Updated buffers template

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Fixed j2 unit test

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Update buffers config for Force10-S6100

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Update VS docker to support speed and buffers test

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Update buffers config generation

- fixed support of sonic-to-sonic install

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>
2018-01-26 08:09:31 -08:00
Joe LeVeque
0fffa6c63b
Add caclmgrd and related files to translate and install control plane ACL rules (#1240) 2018-01-09 17:55:10 -08:00
Joe LeVeque
c898a04b28
[sudoers] Add 'docker ps' to READ_ONLY_CMDS (#1259) 2017-12-21 11:03:08 -08:00
Liuqu
dce6d3536b [TACACS+]: Add configDB enforcer for TACACS+ (#1214)
* [TACACS+]: Add configDB enforcer for TACACS+

* hostcfgd - configDB enforcer for TACACS+, listen configDB to
  modify the pam configuration for Authentication in host
* Add a service script for hostcfgd

  Signed-off-by: Chenchen Qi <chenchen.qcc@alibaba-inc.com>

* [TACACS+]: Generate conf file by template file

* Generate common-auth-sonic and tacplus_nss.conf by jinja2 template

  Signed-off-by: Chenchen Qi <chenchen.qcc@alibaba-inc.com>
2017-12-12 03:45:44 -08:00
Taoyu Li
617b3e43b1
Add service to config hostname based on configdb (#1174) 2017-11-22 14:36:25 -08:00
Andriy Moroz
6d0329af3d Move QoS configuration to Config DB (#1178)
* Move Mellanox QoS configuration to config DB

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Move qos.json to hwsku subfolder

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Remove copying of old qos config

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Update WRED threshold values

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* hwsku2

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Fix syntax error in json

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Add qos config for some Dell and Arista platforms

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Fix inital qos config on clean boot

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Updated swss-common and swss pointers (QoS in Config DB)

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>
2017-11-22 08:58:22 -08:00
Taoyu Li
c5eba7dd34 [baseimage]: Fix racing condition between updategraph and rc.local (#1175) 2017-11-22 00:51:05 -08:00
lguohan
df529efef7
[baseimage]: fix mac address calculation on mellanox and centec platform (#1166) 2017-11-20 10:05:08 -08:00
Prince Sunny
803c263331 [baseimage]: Subnet route added for management interface (eth0) - "fixes #1023" (#1142)
* Added management subnet route to route table-default in kernel.

* Added sample output to interface file
2017-11-14 08:19:24 -08:00
Haiyang Zheng
a69b353630 [interfaces.j2] Get mtu value from config DB if provided (#1128)
Signed-off-by: Haiyang Zheng <haiyang.z@alibaba-inc.com>
2017-11-10 13:54:31 -08:00
Marian Pritsak
c64d423fec [rc.local]: Fix init_cfg.json (#1129)
If device MAC is added to init_cfg.json, it has to be done using
intermediate file. We cannot redirect to same file while trying to read
from it because it will be truncated first.

Signed-off-by: marian-pritsak <marianp@mellanox.com>
2017-11-08 08:50:22 -08:00
Taoyu Li
f7c39720f7
Restart ntp after ntp-config (#1106)
* Restart ntp after ntp-config
* Remove ntp dependency to ntp-config
2017-11-07 14:51:07 -08:00
lguohan
1ce9b85e3c
[init]: save the initial switch mac to config db (#1125)
* [init]: save the initial switch mac to config db

Save the initial switch mac to config db DEVICE_METADATA|localhost entry.

* update sonic-swss submodule
2017-11-06 23:40:27 -08:00
JipanYanga
7406d3709b [configdb]: Add support for vlanconfd and intfconfd (#1063)
* Add support for vlanconfd and intfconfd

Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>

* Change name to vlanmgrd and intfmgrd

Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>

* Add missing vlan_members for parse_dpg result

Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>

* Remove cfgmgr debug CLI from image

Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>

* Update swss and swss-common submodules for VLAN trunk support

Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
2017-11-05 22:37:16 -08:00
JipanYanga
84cbfd5bbc [configdb]: Store switch mac to configDB switch table (#1108)
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
2017-11-05 00:31:29 -07:00
Shuotian Cheng
06c0f7d2e8 Revert "[ntp]: Restart ntp after ntp-config (#1098)" (#1102)
This reverts commit c832f2af62.
2017-11-01 18:40:33 -07:00
Taoyu Li
c832f2af62 [ntp]: Restart ntp after ntp-config (#1098) 2017-10-31 22:20:18 -07:00
Taoyu Li
a7ea0556c8 [updategraph]: Support a special value to use empty configuration (#1086)
When updategraph service is enabled, a special value 'default'
from DHCP response will now initialize the system with an empty
configuration instead of existing minigraph.

A DHCP response without option 224 will remain the current behavior
of skipping graph update and use existing default minigraph.
2017-10-27 18:01:02 -07:00
Joe LeVeque
37dc7bd478 [interfaces]: Set hwaddr of VLAN interfaces to system MAC upon creation (#1042) 2017-10-16 17:36:21 -07:00
Hnydyn Nazar
118c2dd39d [ntp]: Fix NTP sync while using DHCP (#1035) 2017-10-13 17:08:35 -07:00
Volodymyr Samotiy
763205ff7d [config]: Fix management interface configuration (#966)
* [config]: Fix management interface configuration

* [config]: Fix management interface configuration

* Fix comments
2017-09-20 23:55:50 -07:00
Prince Sunny
72f5d6bcb7 [interfaces]: Change MTU value to 9100 (#967)
* Updated MTU to the widely used value with other devices
2017-09-19 19:29:00 -07:00
padmanarayana
6935e00909 [build/onie installer] Install grub for SONiC post migration from another NOS (#949)
* Install grub for SONiC post migration from another NOS

* Install grub from bundled debian package instead of using ONIE's. Address review comments
2017-09-17 11:41:29 -07:00
Taoyu Li
c9cc7aea41 [configdb] Migrate minigraph configurations to DB (#942)
Modify minigraph parser output format so it fit DB schema
Modify configuration templates to fit new schema
Systemd services dependencies are modified so database starts before any configuration consumer
2017-09-12 14:13:27 -07:00
Marian Pritsak
8f1ac5d5ec [rsyslog]: Use timegenerated instead of timestamp (#944)
* [rsyslog]: Use timegenerated instead of timestamp

This is useful when rsyslog is used to put markers generated on other machines.
This way all messages will have a timestamp from a single system.

* [rsyslog] Use subseconds from local machine
2017-09-08 18:25:25 -07:00
Marian Pritsak
e418675ba5 [rsyslog]: Use SONiC template in containers (#940) 2017-09-07 13:01:20 -07:00
padmanarayana
2d3b064437 [image]: build sonic-broadcom.raw image for sonic conversion from ftos (#901)
1. "make target/sonic-broadcom.raw" will create the compressed dd'able image.
2. This will also update the grub config files (device/dell/*/nos_to_sonic_grub.cfg) with the image versions.
2017-08-27 20:13:38 -07:00
Joe LeVeque
178fc032ae [sfputil]: Add support for SFP presence, low-power mode and reset (#877)
- Update sfputil plugins for Dell FORCE10-S6000, Arista 7050-QX-32, 7050-QX-32-S
2017-08-11 11:36:32 -07:00
Joe LeVeque
9d5adb993a [System logs]: Improvements to prevent filling /var/log partition (#865)
- Force log rotation at size thresholds only (no longer also rotating logs daily), allowing for more consistent archived log size
- Eliminate remaining duplicate log messages
- Cron facility now only logs to cron.log (was also logging to syslog)
- Debug, mail, news and user log facilities only log to syslog; no longer creating separate log files for these facilities
- Cron job that calls logrotate every minute now uses the main /etc/logrotate.conf file so as to check/rotate all logs every minute, not just the logs specified in the rsyslog file. Also redirecting output of this command to /dev/null to prevent "(CRON) info (No MTA installed, discarding output)" messages in cron.log due to lack of a mail service
- Delete archive files based on remaining /var/log partition space. Note that this solution currently requires a minimum /var/log partition size of 32MB to function correctly
- Update sonic-sairedis and sonic-swss submodules to incorporate recording file name changes
- Add .screen file to .gitignore (unrelated)
2017-08-10 16:24:57 -07:00
Taoyu Li
a2fe0212be [ConfigDB] Move all BGP configuration into DB (#861)
- BGP data read from minigraph.py now match DB schema
- BGP templates are updated
- bgpcfgd can now deal with runtime neighbor create/delete
2017-08-08 16:23:58 -07:00
Taoyu Li
829a205b85 [config services] Not to block syslog service on minigraph update (#850) 2017-07-27 19:52:22 -07:00
Joe LeVeque
f49cac086f Remove extra trailing newlines at EOF (#804)
Files now end with a single newline
2017-07-12 20:54:37 -07:00
pavel-shirshov
a78d3b1a9f [base]: allow-hotplug is enough in /etc/network/ifaces. auto is not required (#781) 2017-07-05 13:50:21 -07:00
sihuihan88
3268946de5 [BGPD]: add bgp dynamic neighbor configuration (#708)
* add bgp dynamic neighbor configuration

* [bgpd]: update as comments

* update as comment

* update to deployment_id_asn_map

* minor change
2017-06-21 18:52:50 -07:00
Taoyu Li
95906a6490 [installer] Copy old config files rather than only minigraph (#730) 2017-06-21 11:02:25 -07:00
lguohan
493edb4584 [image]: add debian security update in the apt source list (#724) 2017-06-19 22:16:05 -07:00
lguohan
4a780f4a6a [submodule]: update swss/sairedis/swss-common submodule (#716)
fix bug for logrotate sairedis log
2017-06-18 16:54:13 -07:00
Qi Luo
88b98c7b89 [image]: Update login message (#706) 2017-06-14 15:18:02 -07:00
Shuotian Cheng
8843c6f192 [logrotate]: Add /var/log/swss/*.rec to logrotate target (#703)
SwSS record files in /var/log/swss/ folder get larger and
larger and were not rotated. Add them here to rotate these files.
2017-06-14 07:05:34 -07:00
Taoyu Li
cefd024c26 Kill dhclient when reconfig interfaces (#683) 2017-06-08 01:50:04 -07:00
lguohan
ea4dfa48c9 Revert "[baseos] Avoid disconnecting mgmt when re-cfg interfaces" (#681)
This reverts commit e74196cd75.
2017-06-07 10:37:49 -07:00
Taoyu Li
e74196cd75 [baseos] Avoid disconnecting mgmt when re-cfg interfaces (#553)
* [baseos] Avoid disconnecting mgmt when recfg interfaces

* Kill dhclient after interfaces-config
2017-06-06 17:12:26 -07:00
lguohan
17f0633143 [image]: change mtu to jumbo size 9216 by default (#641) 2017-05-28 00:36:34 -07:00
Taoyu Li
bd52f411ff [interfaces]: Use default table instead of main table for forced_mgmt_routes (#635)
If routes are inserted in main table, they wont' be overwritten
by the routes learned via BGP. Then the routes will be missing
from the ASIC.
Thus a default table is used so that control plane and data plane
routes are isolated and could be configured independently.
2017-05-27 01:14:58 -07:00