Signed-off-by: Neetha John <nejo@microsoft.com>
Why I did it
There is a need to select different mmu profiles based on deployment type
How I did it
There will be separate subfolders (RDMA-CENTRIC, TCP-CENTRIC, BALANCED) in each hwsku folder which contains deployment specific mmu and qos settings. SonicQosProfile attribute in the minigraph will be used to determine which settings to use. If that attribute is not present, the default settings that exist in the hwsku folder will be used
Why I did it
Add infrastructure to support adding feature specific acls.
If feature specific ACLs has to be added:
if feature_name in self.feature_present and self.feature_present.get('feature_name'):
add_feature_specific_acls()
How I did it
Add function to get features present in feature table.
How to verify it
unit-test passes.
- Why I did it
To optimize fast-reboot. Teamd can be stopped after bgp is stopped and after swss is stopped because the last LACP packet can be sent still since syncd is still running. Saves 15 sec on shutdown.
- How I did it
Defined in the manifest for teamd to be stopped after swss
- How to verify it
Run it on the switch.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
* [device]: Add SAI checksum verify to TD3 config
* A new config option was added to control the value of IPV4_INCR_CHECKSUM_ORIGINAL_VALUE_VERIFY in the EGR_FLEX_CONFIG control register (this prevents checksums of 0xffff from being propagated to other devices)
Why I did it
This was an ask by Microsoft to provide:
7260 config.bcm file for hardware sku Arista-7260CX3-D92C16 (Named Arista-7260CX3-D96C16).
There are 16 100G uplinks:
Ethernet13-20/1
Ethernet45-52/1
All other ports are breakout to 2 50G ports.
How I did it
Copied existing Arista-7260CX3-D108C8 HWSKU and altered the bcm.config and port_config.ini files.
How to verify it
The new 100G ports do come up with a 201811 image using this HWSKU.
Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
Why I did it
Cherry-pick: #11405
Fix the openssh build issue, upgrade from 8.4p1-5 to 8.4p1-5+deb11u1.
https://dev.azure.com/mssonic/build/_build/results?buildId=120209&view=logs&j=88ce9a53-729c-5fa9-7b6e-3d98f2488e3f&t=8d99be27-49d0-54d0-99b1-cfc0d47f0318
+ sudo dpkg --root=./fsroot-broadcom -i target/debs/bullseye/openssh-server_8.4p1-5_amd64.deb
dpkg: warning: downgrading openssh-server from 1:8.4p1-5+deb11u1 to 1:8.4p1-5
(Reading database ... 44818 files and directories currently installed.)
Preparing to unpack .../openssh-server_8.4p1-5_amd64.deb ...
Unpacking openssh-server (1:8.4p1-5) over (1:8.4p1-5+deb11u1) ...
dpkg: dependency problems prevent configuration of openssh-server:
openssh-server depends on openssh-client (= 1:8.4p1-5); however:
Version of openssh-client on system is 1:8.4p1-5+deb11u1.
dpkg: error processing package openssh-server (--install):
dependency problems - leaving unconfigured
Errors were encountered while processing:
openssh-server
+ clean_sys
How I did it
Upgrade openssh from 8.4p1-5 to 8.4p1-5+deb11u1.
Why I did it
Cherry pick PR: #11072
[Bug]: fix the version file name issue
Why I did it
[Bug]: fix the version file name issue
Fix the build failure: https://dev.azure.com/mssonic/build/_build/results?buildId=107211&view=results
+ scripts/build_debian_base_system.sh amd64 bullseye ./fsroot-centec
sed: can't read /tmp/tmp.glTzJefV24/version-deb: No such file or directory
Not found host-base-image packages, please check the version files in files/build/versions/host-base-image
How I did it
Change the version-deb, to versions-deb
And add an improvement for host base image build, if the version path not exist, skipped the version control for base image.
How to verify it
https://dev.azure.com/mssonic/build/_build/results?buildId=107587&view=results
Why I did it
When any of the test job failed in the test stage, the rerun will not work, the test stage will be skipped automaticall, so we do not have chance to rerun the test stage again, and the checks of the test will be always in failed status, block the PR to merge forever.
It should be caused by the condition in the Test stage, we should specify the status of the BuildVS stage.
How I did it
Fix stage dependency logic.
Why I did it
Fix the missing debian package for reproducible build issue.
The gnupg2 should be added into the version file.
https://dev.azure.com/mssonic/build/_build/results?buildId=118139&view=logs&j=88ce9a53-729c-5fa9-7b6e-3d98f2488e3f&t=8d99be27-49d0-54d0-99b1-cfc0d47f0318
The following packages have unmet dependencies:
gnupg2 : Depends: gnupg (>= 2.2.27-2+deb11u2) but 2.2.27-2+deb11u1 is to be installed
E: Unable to correct problems, you have held broken packages.
The issue was caused by the gnupg2 removed, and not detected.
sonic-buildimage/build_debian.sh
Line 250 in 4fb6cf0
sudo LANG=C chroot $FILESYSTEM_ROOT apt-get -y remove software-properties-common gnupg2 python3-gi
How I did it
Export the debian packages when any debian package being removed.
Give more room for the kernel image in memory
Change-Id: I015856d173d50d94e30d8c555590efb70eb712ae
Signed-off-by: Pavan Naregundi <pnaregundi@marvell.com>
Signed-off-by: Neetha John nejo@microsoft.com
Why I did it
For storage backend, certain rules will be applied to the DATAACL table to allow only vlan tagged packets and drop untagged packets.
How I did it
Create DATAACL table if the device is a storage backend device
To avoid ACL resource issues, remove EVERFLOW related tables if the device is a storage backend device
How to verify it
Added the following unit tests
- verify that EVERFLOW acl tables is removed and DATAACL table is added for storage backend tor
- verify that no DATAACL tables are created and EVERFLOW tables exist for storage backend leaf
Why I did it
Storage backend has all vlan members tagged. If untagged packets are received on those links, they are accounted as RX_DROPS which can lead to false alarms in monitoring tools. Using this acl to hide these drops.
How I did it
Created a acl template which will be loaded during minigraph load for backend. This template will allow tagged vlan packets and dropped untagged
How to verify it
Unit tests
Signed-off-by: Neetha John <nejo@microsoft.com>
* [sflow + dropmon] added INCLUDE_SFLOW_DROPMON flag, added patches for hsflowd
*Added a capability of monitoring dropped packets for the sFlow daemon in order to improve network - monitoring, diagnostic, and troubleshooting. The drop monitor service allows the sFlow daemon to export another type of sample - dropped packets as Discard samples alongside Counter samples and Packet Flow samples.
Signed-off-by: Vadym Hlushko <vadymh@nvidia.com>
- Why I did it
Advance to new SAI version for bugs fixes as well as new features/enhacements:
New:
1. ARM64 support
2. FG ECMP performance optimization
3. Support setting empty list for port ingress/egress buffer profile list
4. Add service port for SN5600
5. Add CR8/SR8/LR8/KR8 interface type
6. Disable mlxtrace during debug dump
Fixes:
1. Fix SAI_ACL_ENTRY_ATTR_FIELD_TC
2. Fix Packets loop back if no member in portchannel
3. Fix optimize descriptors apply time (and fast boot time)
4. Add flush fdb entries for vxlan tunnel bridge port
5. Don't disable used tunnel underlay interfaces
- How I did it
Advanced SAI submodule
- How to verify it
make configure PLATFORM=mellanox
make target/sonic-mellanox.bin
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
* [Mellanox]Check dmi file permission before access (#11309)
Signed-off-by: Sudharsan Dhamal Gopalarathnam sudharsand@nvidia.com
Why I did it
During the system boot up when 'show platform status' or 'show version' command is executed before STATE_DB CHASSIS_INFO table is populated, the show will try to fallback to use the platform API. The DMI file in mellanox platforms require root permission for access. So if the show commands are executed as admin or any other user, the following error log will appear in the syslog
Jun 28 17:21:25.612123 sonic ERR show: Fail to decode DMI /sys/firmware/dmi/entries/2-0/raw due to PermissionError(13, 'Permission denied')
How I did it
Check the file permission before accessing it.
How to verify it
Added UT to verify. Manually verified if the error log is not thrown.
This PR is a backport of #10950 and a fix for it #11227
- Why I did it
To not build python2 pysairedis on bullseye
- How I did it
Cherry-picked above PRs from master
- How to verify it
Build
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
- Why I did it
This is for the eventual support of multiple architectures for the mellanox platform.
- How I did it
Change the location of the binaries in Switch-SDK-drivers so that the path specifies the target architecture in addition to the target distribution that the debians are built for.
This is the most straightforward way to separate binaries built against different architectures and selectively target them for installation in the mellanox SONiC image.
- How to verify it
Build SONiC for mellanox and verify it compiles successfully.
Why I did it
To further support parse out soc_ipv4 and soc_ipv6 out of Dpg:
<DeviceDataPlaneInfo>
<IPSecTunnels />
<LoopbackIPInterfaces xmlns:a="http://schemas.datacontract.org/2004/07/Microsoft.Search.Autopilot.Evolution">
<a:LoopbackIPInterface>
<ElementType>LoopbackInterface</ElementType>
<Name>HostIP</Name>
<AttachTo>Loopback0</AttachTo>
<a:Prefix xmlns:b="Microsoft.Search.Autopilot.NetMux">
<b:IPPrefix>10.10.10.2/32</b:IPPrefix>
</a:Prefix>
<a:PrefixStr>10.10.10.2/32</a:PrefixStr>
</a:LoopbackIPInterface>
<a:LoopbackIPInterface>
<ElementType>LoopbackInterface</ElementType>
<Name>HostIP1</Name>
<AttachTo>Loopback0</AttachTo>
<a:Prefix xmlns:b="Microsoft.Search.Autopilot.NetMux">
<b:IPPrefix>fe80::0002/128</b:IPPrefix>
</a:Prefix>
<a:PrefixStr>fe80::0002/128</a:PrefixStr>
</a:LoopbackIPInterface>
<a:LoopbackIPInterface>
<ElementType>LoopbackInterface</ElementType>
<Name>SoCHostIP0</Name>
<AttachTo>server2SOC</AttachTo>
<a:Prefix xmlns:b="Microsoft.Search.Autopilot.NetMux">
<b:IPPrefix>10.10.10.3/32</b:IPPrefix>
</a:Prefix>
<a:PrefixStr>10.10.10.3/32</a:PrefixStr>
</a:LoopbackIPInterface>
<a:LoopbackIPInterface>
<ElementType>LoopbackInterface</ElementType>
<Name>SoCHostIP1</Name>
<AttachTo>server2SOC</AttachTo>
<a:Prefix xmlns:b="Microsoft.Search.Autopilot.NetMux">
<b:IPPrefix>fe80::0003/128</b:IPPrefix>
</a:Prefix>
<a:PrefixStr>fe80::0003/128</a:PrefixStr>
</a:LoopbackIPInterface>
</LoopbackIPInterfaces>
</DeviceDataPlaneInfo>
Signed-off-by: Longxiang Lyu lolv@microsoft.com
How I did it
For servers loopback definitions in Dpg, if they contain LoopbackIPInterface with tags AttachTo, which has value of format like <server_name>SOC, the address will be regarded as a SoC IP, and sonic-cfggen now will treat the port connected to the server as active-active if the redundancy_type is either Libra or Mixed.
How to verify it
Pass the unittest.
Signed-off-by: Longxiang Lyu <lolv@microsoft.com>
Signed-off-by: Sudharsan Dhamal Gopalarathnam sudharsand@nvidia.com
Why I did it
During the system boot up when 'show platform status' or 'show version' command is executed before STATE_DB CHASSIS_INFO table is populated, the show will try to fallback to use the platform API. The DMI file in mellanox platforms require root permission for access. So if the show commands are executed as admin or any other user, the following error log will appear in the syslog
Jun 28 17:21:25.612123 sonic ERR show: Fail to decode DMI /sys/firmware/dmi/entries/2-0/raw due to PermissionError(13, 'Permission denied')
How I did it
Check the file permission before accessing it.
How to verify it
Added UT to verify. Manually verified if the error log is not thrown.
The asan-enabled docker image will be used in other CIs that run DVS tests.
Why I did it
To add a possibility to run DVS tests with ASAN for other CIs (e.g. swss).
How I did it
Added the 'asan_image' flag to the vs job group.
How to verify it
Run the CI and check the docker-sonic-vs-asan.gz artifact.
The following packages have unmet dependencies:
libssl-dev : Depends: libssl1.1 (= 1.1.1n-0+deb11u3) but 1.1.1n-0+deb11u2 is to be installed
E: Unable to correct problems, you have held broken packages.
- Why I did it
To include latest fixes:
1. Warmboot | When trying to reconfigure the Flex Parser header and Flex transition parameters after ISSU, the switch will returned an error even if the configuration was identical to that done before performing the ISSU.
2. Link Up | When toggling many ports of the Spectrum devices while raising 10GbE link up and link maintenance is enabled, the switch may get stuck and may need to be rebooted.
3. Shared buffer | While moving from lossless to lossy while shared headroom was used, reduction of the shared headroom can only be done prior to pool type change and when shared headroom is not utilized.
- How I did it
Updated SDK submodule along with the relevant Makefiles
- How to verify it
Build an image and run tests from "sonic-mgmt".
Signed-off-by: Volodymyr Samotiy <volodymyrs@nvidia.com>
