Implement Watchdog platform2.0 API for DellEMC S6100 platform.
- Added new file watchdog.py in sonic_platform directory.
- Enabled API support to Enable/disable watchdog.
Implement part of the Chassis and Fan related APIs.
- Chassis APIs
get_base_mac()
get_serial_number()
get_serial_number()
get_system_eeprom_info()
get_reboot_cause()
- Fan APIs
get_direction()
get_speed()
get_target_speed()
get_speed_tolerance()
set_speed()
set_status_led()
get_target_speed()
- Fan APIs base on Device API
get_name()
get_presence()
get_model()
get_serial()
get_status()
Signed-off-by: Wirut Getbamrung wgetbumr@celestica.com
* Rename asn/deployment_id_asn_map.yaml to constants/constants.yaml
* Fix bgp templates
* Add community for loopback when bgpd is isolated
* Use correct community value
* Preemphasis values for various optics
This patch adds the preemphasis values for the various supported
optics for qfx5210 platform
Signed-off-by: Ciju Rajan K <crajank@juniper.net>
Fixed the fpga crash issue which we see in 15-20 mins time frame after onie-install. Accessing stale i2c transfer message buffer causes this crash. Te message buffer becomes stale due to race between i2c transfer and fpga interrupt handler.
This new state STATE_STOP will not be exposed for the wake up call till all the ISR of previous transfer is completed successfully.
Fixed Makefile of FRR. Before we had issues after #3589:
- When you want to rebuild frr with new changes you get error "branch frr/7.1 is already exist".
- When your patch list is empty stg undo gives an error
* [sonic-cfggen] optimize execution time
a lot of template rendering causes switch to start longer because jinja2
needs to parse them. Introducing RedisBytecodeCache to store parsed buckets of
internal template bytecode to speedup same template rendering during start
* [sonic-cfggen] do lazy regexp compilation to speedup sonic-cfggen
* [sonic-cfggen] address pep8 related comments
Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
We noticed in tests/production that there is a low probability failure
where /etc/hosts could have some garbage characters before the entry for
local host name. The consequence is that all sudo command would be very
slow. In extreme cases it would prevent some services from starting
properly.
I suspect that the /etc/hosts file might be opened by some process causing
the issue. Editing contents with new file level and replace the whole file
should be safer.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
[Makefile] Kill arm march docker service before every run to avoid stale entries
[Platform] Marvell - add dtb deb pkg
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
Now it's possible to add and remove peers based on ConfigDB
- What I did
Fixed functionality for dynamically adding/removing static bgp peers.
- How I did it
Split the bgp default template on bgp part and bgp peer part
Changed bgpcfgd to use 1.
- How to verify it
Build an image and run on your DUT
Somehow this was missed in april, I added the icons for 201904 so that
the branch is not forgotten
Signed-off-by: Michel Moriniaux <m.moriniaux@criteo.com>
The following changes are done as part of this commit:
- Adding the system reboot handler
- Adding swizzle reset case for the reboot reason
- Workaround for the boot problem from Golden bios
- Adding the logging messages for platform scripts
- EEPROM parsing and library routines
Sonic-swss-common:
aaa8133 - 2019-10-12 : Add VRF object table in state_db (#312) [Tyler Li]
91aceb1 - 2019-10-11 : [schema] Update schema to support debug counters (#308) [Danny Allen]
9bcd5ca - 2019-09-28 : [multi-DB] fix vs test, should NOT replace old DBConnector API with new DBConnector API since vs test docker has no database_config.josn (#311) [Dong Zhang]
599155a - 2019-09-25 : [multi-DB] Part 2: C++ interface API changes / swsscommon unit test / LOGLEVEL_DB apply new API (#301) [Dong Zhang]
379ac73 - 2019-09-20 : add bulkremove for consumer_table_pops.lua (#306) [Dong Zhang]
6b805d3 - 2019-09-19 : timerfd return 0 with errno =0 - handle as False alarm. (#302) [Renuka Manavalan]
e455891 - 2019-09-03 : Add VLAN_SUB_INTERFACE in CONFIG_DB schema (#284) [Wenda Ni]
Sonic-swss
731a8f5 - 2019-10-17 : [copporch]: fix the endless loop problem when removing copp table group. (#1038) [wangshengjun]
1623219 - 2019-10-14 : Enable C++ unit test during build (#1092) [Qi Luo]
629c9d3 - 2019-10-14 : [vstest]: Revert back to 2 sec, and check if we got more than expected number of syslogs (#1091) [Prince Sunny]
80b2ace - 2019-10-11 : sonic-swss/orchagent: Add new protocol trap name support (#1087) [jpxjlrldgit]
9f765f7 - 2019-10-11 : [aclorch]: Check for existing mirror table only when creating a new table (#1089) [Danny Allen]
4c10260 - 2019-10-11 : [vstest]: Update Route test to check for added entry (#1088) [Prince Sunny]
e658b64 - 2019-10-11 : [chassisorch]: Add everflow feature for chassis (#1024) [Ze Gan]
5b13387 - 2019-10-10 : [changelog]: Revert changelog that was done for passing VS test. (#1080) [Prince Sunny]
90a690d - 2019-10-10 : [aclorch]: Simplify the TCP flags matching code and support exact value match (#1072) [Shuotian Cheng]
3461710 - 2019-10-09 : Single VRF for ingress and egress flows, skip route replication (#1045) [Prince Sunny]
953474a - 2019-10-03 : [swss]: Do not use namespace in header files (#1081) [Wenda Ni]
bd36751 - 2019-10-03 : Change nexthop key to ip & ifname (#977) [tylerlinp]
fee1aaa - 2019-10-02 : [teamsyncd]: Check if LAG exists before removing (#1069) [Shuotian Cheng]
175f3de - 2019-09-30 : Update ECMP NHopGroup for Port Channel oper down (#1030) [Sumukha Tumkur Vani]
182940d - 2019-09-26 : [mirrororch]: Remove mirror session state after it is remvoed (#1066) [Shuotian Cheng]
d823dd1 - 2019-09-20 : [MirrorOrch]: Mirror Session Retention across Warm Reboot (#1054) [Shuotian Cheng]
a5b6e7c - 2019-09-19 : Ignore link local neighbors (#1065) [Prince Sunny]
0ddaba3 - 2019-09-19 : Adopt to signature change of Selectable::readData, which switched (#1061) [Renuka Manavalan]
543bd98 - 2019-09-18 : [aclorch]: Fix table name in counter table for mirror rules (#1060) [Shuotian Cheng]
12c29b4 - 2019-09-19 : Cannot ping to link-local ipv6 interface address of the switch. (#774) [Kiran Kumar Kella]
4d8e08d - 2019-09-18 : change in fpmsyncd to skip the lookup for the Master device name if the route object table value is zero (#1048) [Arvindsrinivasan Lakshmi narasimhan]
da514f5 - 2019-09-18 : Do not update lag mtu from teamsyncd (netlink) (#1053) [Prince Sunny]
3fb22e1 - 2019-09-16 : Check warmboot flag during initialization (#1057) [Prince Sunny]
d98d1e9 - 2019-09-16 : [aclorch]: Egress mirror action support and action ASIC support check (#963) [Stepan Blyshchak]
313ef5c - 2019-09-09 : Warmboot Vlan neigh restore fix (#1040) [Prince Sunny]
5841e06 - 2019-09-06 : Add dot1p to tc mapping support (#871) [Wenda Ni]
39fe568 - 2019-08-30 : [aclorch]: Revise ACL rule creation/removal logs (#1042) [Shuotian Cheng]
c461911 - 2019-08-27 : [copporch]: Fix the typo - mld_v1_done (#1037) [wangshengjun]
34915de - 2019-08-22 : [portsyncd]: Add default catch block in portsyncd (#1033) [SuvarnaMeenakshi]
dc81a21 - 2019-08-20 : [vnet]: Fix FDB related failure in "vnet_bitmap" virtual switch test (#1034) [Volodymyr Samotiy]
5ae4226 - 2019-08-19 : [test]: Adjust stale timer for warm-reboot neighborsync test cases (#1031) [zhenggen-xu]
65cbd55 - 2019-08-16 : [build]: Fix compiling warnings using ARM 32 bit compiler (#1015) [arheneus@marvell.com]
b611808 - 2019-08-16 : [Orchagent]: Fixbug segmentfault at routeorch (#1025) [Ze Gan]
