Commit Graph

1078 Commits

Author SHA1 Message Date
Petro Bratash
52b349442d
[BFN] Add support pcied daemon for Montara and Newport (#5199)
Signed-off-by: Petro Bratash <petrox.bratash@intel.com>
2020-08-18 14:32:48 -07:00
Kebo Liu
bf3c901c6c
[Mellanox] Update the sfp platform API to get the ext_specification_compliance with new way (#5123)
Update the platform API implementation with calling dedicated parse function which defined in the platform-common as defined by https://github.com/Azure/sonic-platform-common/pull/112
2020-08-13 19:17:01 -07:00
Joe LeVeque
fc9e97fc3d
[build] Build/install sonic-ledd as a Python wheel package (#5168)
As part of migrating all Python-based package installers to wheel format rather than Debian packages. Also to allow for easily building a Python 3 version of the package in the near future.

- Also remove some references to sonic-daemon-base which I previously missed and add missing sonic-py-common dependency for sonic-pcied.
2020-08-13 11:26:43 -07:00
Roy Lee
6f9acee89b
[device][as7816-64x] Update fan speed reading. (#5102)
Original converting from register is wrong, it makes the fan speed much higher than it is. Change the way fan speed is calculated from CPLD.

Signed-off-by: roy_lee <roy_lee@accton.com>
2020-08-13 10:50:31 -07:00
jostar-yang
9c22d19b76
[as5835-54x] Modify qsfp port reset to normal state (#5161)
HW set qsfp port to reset at default. so need SW to set to normal when boot.

1. Modify cpld driver to invert reset offset value
2. Set to normal when boot.
2020-08-12 16:18:31 -07:00
Volodymyr Samotiy
a5d798257e
[Mellanox] Update ASIC packages to: SAI 1.17, SDK 4.4.1306, FW xx.2008.1310 (#5137) 2020-08-11 11:25:18 -07:00
rkdevi27
7a44e7e81d
ssd firmware upgrade for S6100 3IE3 devices with cold-reboot/warm-reboot/fast-reboot. (#4911)
* ssd_fw_upgrade

* changed hdparm upgrade post filesystems unmount
2020-08-11 11:16:29 -07:00
Danny Allen
9297d8ee47
[dvs] Start portsyncd before orchagent for docker-sonic-vs container (#5140)
Swap order of orchagent and portsyncd in start.sh and fix priorities

Many docker virtual switch tests are failing at the moment because orchagent never finishes initializing. After doing some searching I figured out that Ethernet24 is never published to State DB, which is reminiscent of #4821

Signed-off-by: Danny Allen <daall@microsoft.com>
2020-08-11 08:52:06 -07:00
gechiang
52e3ba4e0f
Moving BRCM SAI from 3.7.5.1-2 to 3.7.5.1-3 to pick up COPP Fix (CS00010697761) (#5127)
Picking up the fix for COPP. See BRCM case CS00010697761 for details on the issue.
2020-08-10 10:32:33 -07:00
Samuel Angebault
5a3d504e61
[arista] Update arista driver submodules (#5116)
- Fix some import issues with sonic_platform
 - Fix for xcvr with newer calls in platform API
 - Miscellaneous improvements
2020-08-07 19:55:51 -07:00
Joe LeVeque
f7a29c7240
Update all references to new 'sonic-installer' name (#5119)
`sonic_installer` has been renamed `sonic-installer`. Update the file name everywhere it is used.
2020-08-07 08:49:39 -07:00
shlomibitton
995bd09486
Add support for 'Extended Specification Compliance' for QSFP cables parser (#5096)
Signed-off-by: Shlomi Bitton <shlomibi@mellanox.com>
2020-08-07 00:16:59 +03:00
taochengyi
08f3b9720b
[centec]: Add centec arm64 architecture support for E530 (#4641)
summary of E530 platfrom:
 - CPU: CTC5236, arm64
 - LAN switch chip set: CENTEC CTC7132 (TsingMa). TsingMa is a purpose built device to address the challenge in the recent network evolution such as Cloud computing. CTC7132 provides 440Gbps I/O bandwidth and 400Gcore bandwidth, the CTC7132 family combines a feature-rich switch core and an embedded ARM A53 CPU Core running at 800MHz/1.2GHz. CTC7132 supports a variety of port configurations, such as QSGMII and USXGMII-M, providing full-rate port capability from 100M to 100G.
- device E530-48T4X: 48 * 10/100/1000 Base-T Ports, 4 * 10GE SFP+ Ports.
- device E530-24X2C: 24 * 10 GE SFP+ Ports, 2 * 100GE QSFP28 Ports.

add new files in three directories:
device/centec/arm64-centec_e530_24x2c-r0
device/centec/arm64-centec_e530_48t4x_p-r0
platform/centec-arm64

Co-authored-by: taocy <taocy2@centecnetworks.com>
Co-authored-by: Gu Xianghong <gxh2001757@163.com>
Co-authored-by: shil <shil@centecnetworks.com>
2020-08-06 03:16:11 -07:00
Guohan Lu
457674ce00 Revert "DPB Breakout Cli Test with proper setup (#3910)"
This reverts commit 0a409ff65e.
2020-08-05 23:44:00 +00:00
lguohan
082c26a27d
[build]: combine feature and container feature table (#5081)
1. remove container feature table
2. do not generate feature entry if the feature is not included
   in the image
3. rename ENABLE_* to INCLUDE_* for better clarity
4. rename feature status to feature state
5. [submodule]: update sonic-utilities

* 9700e45 2020-08-03 | [show/config]: combine feature and container feature cli (#1015) (HEAD, origin/master, origin/HEAD) [lguohan]
* c9d3550 2020-08-03 | [tests]: fix drops_group_test failure on second run (#1023) [lguohan]
* dfaae69 2020-08-03 | [lldpshow]: Fix input device is not a TTY error (#1016) [Arun Saravanan Balachandran]
* 216688e 2020-08-02 | [tests]: rename sonic-utilitie-tests to tests (#1022) [lguohan]

Signed-off-by: Guohan Lu <lguohan@gmail.com>
2020-08-05 13:23:12 -07:00
gechiang
569289ac86
Moving BRCM SAI from 3.7.5.1-1 to 3.7.5.1-2 to pick up the stubbed SA… (#5101)
* Moving BRCM SAI from 3.7.5.1-1 to 3.7.5.1-2 to pick up the stubbed SAI API that were present in the header but missing in SAI implementation that cause link error during build.
In SAI header 1.5.2 there are defined SAI APIs such as "sai_query_attribute_capability()" and few other APIs that were missing the stub code in BRCM 3.7.5.1 SAI code delivery. This causes linking issue during build when we implemented the common handler to support "sai_query_attribute_capability()" that other platform supports. The expectation is that all SAI vendors must implement all the SAI header defined SAI APIs by stubbing those that they don't have the actual code support to return "SAI_STATUS_NOT_IMPLEMENTED".  This allows common code for all platforms to be developed without having linking issue during build for all platforms. BRCM has provided the patch code and this PR moves the BRCM SAI from 3.7.5.1-1 to 3.7.5.1-2 to pick up those missing stubbed SAI APIs.
See BRCM case CS00010790550 for more details
2020-08-05 09:12:04 -07:00
Joe LeVeque
172354d36a
[sonic-py-common] get_platform(): Refactor method of retrieving platform identifier (#5094)
Applications running in the host OS can read the platform identifier from /host/machine.conf. When loading configuration, sonic-config-engine *needs* to read the platform identifier from machine.conf, as it it responsible for populating the value in Config DB.

When an application is running inside a Docker container, the machine.conf file is not accessible, as the /host directory is not mounted. So we need to retrieve the platform identifier from Config DB if get_platform() is called from inside a Docker 
container. However, we can't simply check that we're running in a Docker container because the host OS of the SONiC virtual switch is running inside a Docker container. So I refactored `get_platform()` to:
    1. Read from the `PLATFORM` environment variable if it exists (which is defined in a virtual switch Docker container)
    2. Read from machine.conf if possible (works in the host OS of a standard SONiC image, critical for sonic-config-engine at boot)
    3. Read the value from Config DB (needed for Docker containers running in SONiC, as machine.conf is not accessible to them)

- Also fix typo in daemon_base.py
- Also changes to align `get_hwsku()` with `get_platform()`
2020-08-04 23:51:35 -07:00
Sangita Maity
0a409ff65e
DPB Breakout Cli Test with proper setup (#3910)
- Created the VS setup to test DPB functionality
- Created "platform.json" for VS docker
- Added test case for Breakout CLI

Signed-off-by: Sangita Maity <sangitamaity0211@gmail.com>
2020-08-04 12:07:44 -07:00
Joe LeVeque
3b89e5d467
[Python] Migrate applications/scripts to import sonic-py-common package (#5043)
As part of consolidating all common Python-based functionality into the new sonic-py-common package, this pull request:
1. Redirects all Python applications/scripts in sonic-buildimage repo which previously imported sonic_device_util or sonic_daemon_base to instead import sonic-py-common, which was added in https://github.com/Azure/sonic-buildimage/pull/5003
2. Replaces all calls to `sonic_device_util.get_platform_info()` to instead call `sonic_py_common.get_platform()` and removes any calls to `sonic_device_util.get_machine_info()` which are no longer necessary (i.e., those which were only used to pass the results to `sonic_device_util.get_platform_info()`.
3. Removes unused imports to the now-deprecated sonic-daemon-base package and sonic_device_util.py module

This is the next step toward resolving https://github.com/Azure/sonic-buildimage/issues/4999

Also reverted my previous change in which device_info.get_platform() would first try obtaining the platform ID string from Config DB and fall back to gathering it from machine.conf upon failure because this function is called by sonic-cfggen before the data is in the DB, in which case, the db_connect() call will hang indefinitely, which was not the behavior I expected. As of now, the function will always reference machine.conf.
2020-08-03 11:43:12 -07:00
Nazarii Hnydyn
c4728a8261
[Mellanox] Add MFT DKMS build support. (#5088)
Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com>
2020-08-03 13:52:40 +03:00
Tamer Ahmed
7872b4e196
[platform] Add Support For Environment Variable File (#5010)
* [platform] Add Support For Environment Variable

This PR adds the ability to read environment file from /etc/sonic.
the file contains immutable SONiC config attributes such as platform,
hwsku, version, device_type. The aim is to minimize calls being made
into sonic-cfggen during boot time.

singed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
2020-07-31 17:59:09 -07:00
Nazarii Hnydyn
fe387289b1
[Mellanox] Update MFT to 4.15.0-104 (#5075)
* [Mellanox] Update MFT to 4.15.0-104.
* [Mellanox] Remove build system W/A.

Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com>
2020-07-30 22:59:57 -07:00
BrynXu
311045f01f
[vs]: support virtual-chassis setup in vs docker (#4709)
virtual-chassis test uses multiple vs instances to simulate a
modular switch and a redis-chassis service is required to run on
the vs instance that represents a supervisor card.
This change allows vs docker start redis-chassis service according
to external config file.

**- Why I did it**
To support virtual-chassis setup, so that we can test distributed forwarding feature in virtual sonic environment, see `Distributed forwarding in a VOQ architecture HLD` pull request at https://github.com/Azure/SONiC/pull/622

**- How I did it**
The sonic-vs start.sh is enhanced to start new redis_chassis service if external chassis config file found. The config file doesn't exist in current vs environment, start.sh will behave like before. 

**- How to verify it**
The swss/test still pass. The chassis_db service is verified in virtual-chassis topology and tests which are in following PRs.

Signed-off-by: Honggang Xu <hxu@arista.com>
(cherry picked from commit c1d45cf81ce3238be2dcbccae98c0780944981ce)

Co-authored-by: Honggang Xu <hxu@arista.com>
2020-07-29 14:20:31 -07:00
Qi Luo
48b5792b07
[redis] Upgrade redis version (#5060)
buster-backports updated and the old version disappeared
2020-07-28 20:50:31 -07:00
lguohan
e1ac3cfc6a
[build]: wait for conflicts package to be uninstalled (#5039)
when parallel build is enabled, both docker-fpm-frr and docker-syncd-brcm
is built at the same time, docker-fpm-frr requires swss which requires to
install libsaivs-dev. docker-syncd-brcm requires syncd package which requires
to install libsaibcm-dev.

since libsaivs-dev and libsaibcm-dev install the sai header in the same
location, these two packages cannot be installed at the same time. Therefore,
we need to serialize the build between these two packages. Simply uninstall
the conflict package is not enough to solve this issue. The correct solution
is to have one package wait for another package to be uninstalled.

For example, if syncd is built first, then it will install libsaibcm-dev.
Meanwhile, if the swss build job starts and tries to install libsaivs-dev,
it will first try to query if libsaibcm-dev is installed or not. if it is
installed, then it will wait until libsaibcm-dev is uninstalled. After syncd
job is finished, it will uninstall libsaibcm-dev and swss build job will be
unblocked.

To solve this issue, _UNINSTALLS is introduced to uninstall a package that
is no longer needed and to allow blocked job to continue.

Signed-off-by: Guohan Lu <lguohan@gmail.com>
2020-07-27 10:46:20 -07:00
Joe LeVeque
c0d1616f89
Introduce sonic-py-common package (#5003)
Consolidate common SONiC Python-language functionality into one shared package (sonic-py-common) and eliminate duplicate code.

The package currently includes three modules:

- daemon_base
- device_info
- logger
2020-07-26 23:15:41 -07:00
Nazarii Hnydyn
5c67a3c31d
[Mellanox] Fix SN3700 platform string. (#5036)
Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com>
2020-07-25 03:05:05 -07:00
Andriy Kokhan
c4748e8fb7
[bfn] Updated SDK packages to SAI v1.6.4 (#5021)
* Update SDK packages to SAI 1.6.4
* Add SAI_SWITCH_TYPE_NPU attribute support

Signed-off-by: Andriy Kokhan <akokhan@barefootnetworks.com>
2020-07-23 12:47:02 -07:00
shlomibitton
bbb91715a8
[Mellanox] Change fan tolerance to 50% (#5018)
Mellanox platforms fan tolerance should change to 50%

Signed-off-by: Shlomi Bitton <shlomibi@mellanox.com>
2020-07-23 11:18:26 -07:00
Aravind Mani
f72aaf3463
DellEMC S6100: Add script files to executable directory (#5012) 2020-07-21 19:25:24 -07:00
Sangita Maity
ebdfb4bef1
Enable DPB dependency check using YANG model in VS container (#45) (#4990)
Added required packages to enabled YANG dependency check for Dynamic Port Breakout in VS container.

[sonic-utilities PR #766](https://github.com/Azure/sonic-utilities/pull/766) has a dependency on it.
Getting error like the following without this fix: `ImportError: No module named yang - required module not found`

Signed-off-by: Sangita Maity <sangitamaity0211@gmail.com>
2020-07-21 10:33:43 -07:00
Guohan Lu
aa9e1e2f43 [vstest]: convert the tests to python3
Signed-off-by: Guohan Lu <lguohan@gmail.com>
2020-07-19 03:39:49 +00:00
Stepan Blyshchak
16a37d8c17
[dockers] update mellanox syncd and pmon to buster (#4818)
Upgrade to libsensors5

Updated sonic-sairedis pointer:
    d54bfb4 [SAI] update pointer (#636)
    1885a8c [syncd] Fix notification on shutdown request (#635)
    9e57ba2 Fixing hostif For Genetlink host interfaces (#633)
    449a092 sonic-sairedis: Add support to sonic-sairedis for gearbox phys (#632)

Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2020-07-18 03:46:15 -07:00
lguohan
25c3900085
[docker-sonic-vs]: upgrade docker-sonic-vs to buster (#4979)
Signed-off-by: Guohan Lu <lguohan@gmail.com>
2020-07-18 00:11:09 -07:00
lguohan
458b4aef48
[vstest]: remove kill exabgp command from the test (#4978)
the command kills all exabgp processes on the host.
since the namespaces are newly added, there should
be no prior exabgp processes.

if it is existing namespace, it is also the dvs
framework job to clean up all prior processes.
2020-07-16 17:19:21 -07:00
Joe LeVeque
9905d9382d
[devices] Update SFP keys to align with new standard (#4975)
Align SFP key names with new standard defined in https://github.com/Azure/sonic-platform-common/pull/97

- hardwarerev -> hardware_rev
- serialnum -> serial
- manufacturename -> manufacturer
- modelname -> model
- Connector -> connector
2020-07-16 13:03:50 -07:00
shlomibitton
545fe3ecd0
Add support for QSFP-DD cables on MLNX platform API (#4965)
Signed-off-by: Shlomi Bitton <shlomibi@mellanox.com>
2020-07-15 11:09:46 -07:00
Sangita Maity
6ebcfb226b
[docker-vs] Install dependencies for testing DPB (#4960)
Added xmltodict and jsondiff packages needed to run vs test cases successfully for DPB.
sonic-utilities PR #766 has a dependency on these packages.

Signed-off-by: Sangita Maity <sangitamaity0211@gmail.com>
2020-07-14 15:52:03 -07:00
ciju-juniper
46cc6968d7
[Juniper][QFX52xx] Platform fixes/enhancements (#4953)
1) Fixing the issues while applying platform TxCTLE settings in sfputil.py for QFX5200
 2) Adding the support for transceiver dom threshold info in sfputil.py for both  QFX5210 & QFX5200 platforms
 3) Updating the sfputil.py for QFX5210 & QFX5200 platforms
4) Adding a new platform specific command 'show_thresholds' to display the FAN dutycycle percentage for various temperature ranges (for both AFI & AFO QFX5200 systems).

Signed-off-by: Ciju Rajan K <crajank@juniper.net>
2020-07-14 14:20:41 -07:00
taochengyi
de16e6f14d
[build][centec] update sai to v1.6.3 (#4951)
update sai to v1.6.3 for centec E582 platform(x86 CPU)
2020-07-13 22:56:42 -07:00
Junchao-Mellanox
76d68ad1f5
[Mellanox] Add support for set/get system led status (#4829)
System health feature needs to set/get system led status

- Add a led object in chassis class and initialize it when the API is called on host side
- Read/write system led system fs to get/set the status
2020-07-13 10:22:39 -07:00
Volodymyr Boiko
39941f0ae2 [BFN] Update SAI and platform packages to 20200710 (#4942)
Barefoot, updated SAI and platform packages to 20200710

Signed-off-by: Volodymyr Boyko <volodymyrx.boiko@intel.com>
2020-07-12 18:08:52 +00:00
Santhosh Kumar T
c9a14f71d0 [DellEMC] Z9264f Disable low power modes in 10G ports (#4908)
In Z9264 by default, all the ports have disabled low power mode except the last two 10G ports.
Disabled low power mode in the last two 10G ports.
2020-07-12 18:08:52 +00:00
arlakshm
a46f4c96e7 Add support for bcmsh and bcmcmd utlitites in multi ASIC devices (#4926)
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
This PR has changes to support accessing the bcmsh and bcmcmd utilities on multi ASIC devices
Changes done
- move the link of /var/run/sswsyncd from docker-syncd-brcm.mk to docker_image_ctl.j2
- update the bcmsh and bcmcmd scripts to take -n [ASIC_ID] as an argument on multi ASIC platforms
2020-07-12 18:08:52 +00:00
Samuel Angebault
c213bcf23a [arista]: Update arista driver submodules (#4922)
- Add more reboot cause reporting
 - Fix backward compatibility issue with older reboot cause format
 - Miscellaneous improvements
2020-07-12 18:08:52 +00:00
lguohan
1dcf8ec04f [kernel]: upgrade linux kernel to 4.9.118 (#4897)
upgrade kernel to latest maintenance version 4.9.118

Signed-off-by: Guohan Lu <lguohan@gmail.com>
2020-07-12 18:08:51 +00:00
Volodymyr Boiko
15748a50ae [barefoot][SAI v1.6.3] Update SAI and platform packages to 20200701 (#4890)
Signed-off-by: Volodymyr Boyko <volodymyrx.boiko@intel.com>
2020-07-12 18:08:51 +00:00
paavaanan
cba801ae89 [Dell]: DellEMC S6100 disable pericom/xlinx chipset (#4868)
- Xilinx/pericom peripherals are not actively used in DellEMC S6100 switch.
- These peripherals are throwing PCIE corrected messages in some of the units and filling syslog.
- Since it is not usable disabling it at startup.
2020-07-12 18:08:51 +00:00
lguohan
58632e6e83 [docker-orchagent]: make build depends only on sairedis package (#4880)
make swss build depends only on libsairedis instead of syncd. This allows to build swss without depending
on vendor sai library.

Currently, libsairedis build also buils syncd which requires vendor SAI lib. This makes difficult to build
swss docker in buster while still keeping syncd docker in stretch, as swss requires libsairedis which also
build syncd and requires vendor to provide SAI for buster. As swss docker does not really contain syncd
binary, so it is not necessary to build syncd for swss docker.

* [submodule]: update sonic-sairedis

* ccbb3bc 2020-06-28 | add option to build without syncd (HEAD, origin/master, origin/HEAD) [Guohan Lu]
* 4247481 2020-06-28 | install saidiscovery into syncd package [Guohan Lu]
* 61b8e8e 2020-06-26 | Revert "sonic-sairedis: Add support to sonic-sairedis for gearbox phys (#624)" (#630) [Danny Allen]
* 85e543c 2020-06-26 | add a README to tests directory to describe how to run 'make check' (#629) [Syd Logan]
* 2772f15 2020-06-26 | sonic-sairedis: Add support to sonic-sairedis for gearbox phys (#624) [Syd Logan]

Signed-off-by: Guohan Lu <lguohan@gmail.com>
2020-07-12 18:08:51 +00:00
Renuka Manavalan
7c30949758 Added new pip packages, required by kube.py (kubernetes CLI). (#4884) 2020-07-12 18:08:51 +00:00
Mahesh Maddikayala
5eabae1ede Fix in libsaibcm for high CPU utilization of syncd (#4874) 2020-07-12 18:08:51 +00:00
Mahesh Maddikayala
74389cb402 [sonic-sairedis] sonic-sairedis submodule update (#4847)
* sonic-sairedis submodule update
* Update BRCM SAI to 3.7.5.1
2020-07-12 18:08:51 +00:00
Kebo Liu
0921e3d6ff [mellanox]: Update SAI to 1.16.5 (#4873)
1.  Upgrade SAI headers to v1.6.3
2.  Fix traffic lost during FFB related to buffer config + optimize buffer config timing for FB
3.  Add ACL fields BTH, IP flags
4.  Add ACL infrastructure of different fields per ASIC type
2020-07-12 18:08:51 +00:00
Junchao-Mellanox
ce391645f2
[Mellanox] add ASIC temperature support to platform API (#4828)
**- Why I did it**

System health feature requires to read ASIC temperature and threshold from platform API

**- How I did it**

Implement Chassis.get_asic_temperature and Chassis.get_asic_temperature_threshold by getting value from system fs.
2020-06-28 17:54:28 -07:00
ciju-juniper
dd4cf912a6
[Juniper][QFX5210] Fixing a few platform issues (#4857)
This patch addresses the following issues:
 1) Platform drivers were not loading in the latest images. Fixed
    the intialization script to make sure that all the drivers are
    loaded.
 2) Getting rid of "pstore: crypto_comp_decompress failed, ret = -22!"
    messages during the kernel boot, after moving to 4.19 kernel. The
    solution is to remove the files under '/sys/fs/pstore' directory.

Signed-off-by: Ciju Rajan K <crajank@juniper.net>
2020-06-28 11:11:34 -07:00
Qi Luo
6849a0351c
[redis] Install vanilla redis packages for Buster and Stretch; upgrade Buster to 6.0.5 (#4732)
upgrade redis server to 5:6.0.5-1~bpo10+1
2020-06-27 01:17:20 -07:00
Kebo Liu
88bbcbf246
[Mellanox] Update SDK to 4.4.0952, FW to *.2007.1280 (#4842) 2020-06-26 13:44:21 +03:00
yozhao101
4fa81b4f8d
[dockers] Update critical_processes file syntax (#4831)
**- Why I did it**
Initially, the critical_processes file contains either the name of critical process or the name of group.
For example, the critical_processes file in the dhcp_relay container contains a single group name
`isc-dhcp-relay`. When testing the autorestart feature of each container, we need get all the critical
processes and test whether a  container can be restarted correctly if one of its critical processes is
killed. However, it will be difficult to differentiate whether the names in the critical_processes file are
the critical processes or group names. At the same time, changing the syntax in this file will separate the individual process from the groups and also makes it clear to the user.

Right now the critical_processes file contains two different kind of entries. One is "program:xxx" which indicates a critical process. Another is "group:xxx" which indicates a group of critical processes
managed by supervisord using the name "xxx". At the same time, I also updated the logic to
parse the file critical_processes in supervisor-proc-event-listener script.

**- How to verify it**
We can first enable the autorestart feature of a specified container for example `dhcp_relay` by running the comman `sudo config container feature autorestart dhcp_relay enabled` on DUT. Then we can select a critical process from the command `docker top dhcp_relay` and use the command `sudo kill -SIGKILL <pid>` to kill that critical process. Final step is to check whether the container is restarted correctly or not.
2020-06-25 21:18:21 -07:00
yozhao101
b8ad0ed4e4
[Monit] Use the string "/usr/bin/syncd\s" to monitor the syncd process (#4706)
**- Why I did it**
After discussed with Joe, we use the string "/usr/bin/syncd\s" in Monit configuration file to monitor 
syncd process on Broadcom and Mellanox. Due to my careless, I did not find this bug during the 
previous testing. If we use the string "/usr/bin/syncd" in Monit configuration file to monitor the 
syncd process, Monit will not detect whether syncd process is running or not. 

If we ran the command  `sudo monit procmactch “/usr/bin/syncd”` on Broadcom, there will be three 
processes in syncd container which matched this "/usr/bin/syncd": `/bin/bash /usr/bin/syncd.sh
wait`, `/usr/bin/dsserve /usr/bin/syncd –diag -u -p /etc/sai.d/sai.profile` and `/usr/bin/syncd –diag -
u -p /etc/sai.d/said.profile`. Monit will select the processes with the highest uptime (at there 
`/bin/bash /usr/bin/syncd.sh wait`) to match and did not select `/usr/bin/syncd –diag -u -p
/etc/sai.d/said.profile` to match. 

Similarly, On Mellanox Monit will also select the process with the highest uptime (at there 
`/bin/bash /usr/bin/syncd.sh wait`) to match and did not select `/usr/bin/syncd –diag -u -p
/etc/sai.d/said.profile` to match.

That is why Monit is unable to detect whether syncd process is running or not if we use the string “/usr/bin/syncd” in Monit configuration file. If we use the string "/usr/bin/syncd\s" in Monit configuration file, Monit can filter out the process `/bin/bash /usr/bin/syncd.sh wait` and thus can correctly monitor the syncd process.

**- How I did it**

**- How to verify it**

Signed-off-by: Yong Zhao <yozhao@microsoft.com>
2020-06-25 17:03:14 -07:00
Danny Allen
c50b431747
[dvs] Install libteamdctl runtime dependency in VS docker (#4837)
* Add libteamdctl dependency to VS docker
* Reorder dependencies and rename libteamctl

Signed-off-by: Danny Allen <daall@microsoft.com>
2020-06-24 14:07:22 -07:00
Junchao-Mellanox
563a0fd21e
[Mellanox] Change port index in port_config.ini to 1-based (#4781)
* Change port index in port_config.ini to 1-based
* Add default port index to port_config.ini, change platform plugins to accept 1-based port index
* fix port index in sfp_event.py
2020-06-23 17:21:36 -07:00
Praveen Chaudhary
c6dcd7d9a1
[docker-sonic-vs/Dockerfile.j2]: Install new YANG PKGs in VS docker. (#4684)
Changes:
. Install new YANG PKGs in VS docker.
. Install fixed version on other PY PKGs.

Signed-off-by: Praveen Chaudhary pchaudhary@linkedin.com
2020-06-22 15:38:36 -07:00
madhanmellanox
2c830f4074
Modified SKU based utils to Platform based utils (#4786)
Co-authored-by: Madhan Babu <madhan@arc-build-server.mtr.labs.mlnx>
2020-06-21 12:15:23 -07:00
Olivier Singla
68576bc2f9
[kerne]: kernel update from 4.19.0-6 to 4.19.0-6-2 (#4711) 2020-06-21 06:41:23 -07:00
Volodymyr Boiko
603b2955e6
[BFN] Update SAI and platform packages to 20200618 (#4817)
Signed-off-by: Volodymyr Boyko <volodymyrx.boiko@intel.com>
2020-06-19 11:00:44 -07:00
Joe LeVeque
1f8a78cef1
[build] No longer install Python 'click-default-group' package (#4811)
All dependencies upon the Python 'click-default-group' package have been removed from sonic-utilities as of https://github.com/Azure/sonic-utilities/pull/903. The submodule was updated to include this patch as of https://github.com/Azure/sonic-buildimage/pull/4601, therefore we no longer need to install this package in the SONiC image.
2020-06-19 10:54:10 -07:00
kuanyu99
f2af8aa8a9
[accton/as5835-54x] Fix sfp related function like tx_disable (#4763)
**- Why I did it**

The tx_disable function isn't work for the accton_ax5835-54x device.

**- How I did it**
Fix the incorrect path of the sfp node path inside the util file.

**- How to verify it**

Test with
"sudo accton_as5835_54x_util.py show"
"sudo accton_as5835_54x_util.py set sfp"

There should see correct value for module_present and module_tx_disable. And should able to set it.

Signed-off-by: kuanyu_chen <kuanyu_chen@edge-core.com>
2020-06-18 10:52:06 -07:00
Nazarii Hnydyn
6014773ac9
[Mellanox] Update MFT to v4.14.5-2. (#4784)
Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com>
2020-06-17 20:03:07 +03:00
Kebo Liu
91a1f131a1
[Mellanox] Update hw-mgmt package to V.7.0010.1000 for master (#4687)
* [Mellanox] Update hw-mgmt package to V.7.0010.1000

* update sonic-linux-kernel pointer to pick up new patch
2020-06-16 21:01:41 +03:00
Volodymyr Samotiy
1e7e6b9521
[Mellanox] Update SDK 4.4.0940 and FW xx.2007.1244 (#4776) 2020-06-16 10:28:10 -07:00
Nazarii Hnydyn
1db64a3bc1
[Mellanox] Add ONIE and SSD platform components. (#4758)
Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com>
2020-06-15 14:25:49 +03:00
Andriy Kokhan
6acd64d005
[BFN] Updated SDK packages to SAI v1.6.1 (#4744)
Signed-off-by: Andriy Kokhan <akokhan@barefootnetworks.com>
2020-06-11 23:24:49 -07:00
Joe LeVeque
5d5d5739c2
[dockers] Rename 'docker-snmp-sv2' to 'docker-snmp' (#4699)
The `-sv2` suffix was used to differentiate SNMP Dockers when we transitioned from "SONiCv1" to "SONiCv2", about four years ago. The old Docker materials were removed long ago; there is no need to keep this suffix. Removing it aligns the name with all the other Dockers.

Also edit Monit configuration to detect proper snmp-subagent command line in Buster, and make snmpd command line matching more robust.
2020-06-11 16:04:23 -07:00
Junchao-Mellanox
4da4955b2f
[Mellanox] Upgrade mft to 4.14.1-8 (#4701) 2020-06-11 09:02:44 +03:00
noaOrMlnx
36419978b7
[Mellanox] Update SAI, SDK 4.4.0928 and FW xx.2007.1208 - master branch (#4723)
Signed-off-by: Noa Or <noaor@mellanox.com>
2020-06-11 09:01:01 +03:00
taochengyi
830c9eabd4
[centec]: update SAI to v1.6.1 for centec x86 platform (#4730) 2020-06-10 01:32:08 -07:00
Joe LeVeque
c6365e7abe
Reorganize .gitignore files (#4707)
- Add .gitignore files in each subdirectory of src/, so as to reduce the size of the .gitignore file in the project root, and also make it easier to maintain (i.e., if a directory in src/ is removed, there will not be outdated entries in the root .gitignore file.

- Also add missing .gitignore entries and remove outdated entries and duplicates.
2020-06-09 21:04:55 -07:00
YaoTien
e2ebe99665
[devices]: Fixed OSW1800 build problem (#4647)
* Enable to build osw1800
* Modify wnc-eeprom which base on debian buster's eeprom.c

Co-authored-by: Brand.huang <brand.huang@wnc.com.tw>
2020-06-09 09:19:45 -07:00
Joe LeVeque
9b27efdcc2
[dockers] Rename 'docker-lldp-sv2' to 'docker-lldp' (#4700)
The -sv2 suffix was used to differentiate SNMP Dockers when we transitioned from "SONiCv1" to "SONiCv2", about four years ago. The old Docker materials were removed long ago; there is no need to keep this suffix. Removing it aligns the name with all the other Dockers.
2020-06-09 09:09:56 -07:00
Arun Saravanan Balachandran
54b284f4b0
[DellEMC]: EEPROM decoder for S6000, S6000-ON (#4718)
**- Why I did it**

For decoding system EEPROM of S6000 based on Dell offset format and S6000-ON’s system EEPROM in ONIE TLV format.

**- How I did it**

- Differentiate between S6000 and S6000-ON using the product name available in ‘dmi’  ( “/sys/class/dmi/id/product_name” )
- For decoding S6000 system EEPROM in Dell offset format and updating the redis DB with the EEPROM contents, added a new class ‘EepromS6000’ in eeprom.py, 
- Renamed certain methods in both Eeprom, EepromS6000 classes to accommodate the plugin-specific methods.

**- How to verify it**

- Use 'decode-syseeprom' command to list the system EEPROM details.
- Wrote a python script to load chassis class and call the appropriate methods.

UT Logs: [S6000_eeprom_logs.txt](https://github.com/Azure/sonic-buildimage/files/4735515/S6000_eeprom_logs.txt), [S6000-ON_eeprom_logs.txt](https://github.com/Azure/sonic-buildimage/files/4735461/S6000-ON_eeprom_logs.txt)
Test script: [eeprom_test_py.txt](https://github.com/Azure/sonic-buildimage/files/4735509/eeprom_test_py.txt)
2020-06-09 09:08:15 -07:00
joyas-joseph
9505bdb910
[docker-syncd-vs]: Convert syncd-vs docker to buster (#4726)
Signed-off-by: Joyas Joseph <joyas_joseph@dell.com>
2020-06-09 09:07:25 -07:00
Mahesh Maddikayala
af81b8ebcd
[libsaibcm] Update pointer to Broadcom SAI debian package (#4725) 2020-06-08 17:03:09 -07:00
taochengyi
6b332f74a0
[centec_syncd_rpc] fix build failure when set ENABLE_SYNCD_RPC=y (#4690) 2020-06-05 12:56:35 -07:00
Samuel Angebault
c8bd640ae5
[arista] Update drivers submodules (#4693)
- Sensor and Fan information added to primary platforms for thermal API.
- Refactors involving better abstractions, code reuse and dead code removal.
- Improvements to the diag capabilities
- Pylintrc added to improve code quality. Will become fatal at a later time.

Co-authored-by: Baptiste Covolato <baptiste@arista.com>
2020-06-04 13:33:33 -07:00
Masaru OKI
3a0de981ca
[kvmimae]: Update sonic-gns3a.sh (#4694)
Cleanup description string
First port (management port) are excluded from general port naming scheme.

Management port are excluded from general port naming scheme.

before:
|on GNS3  |in SONiC |
|---------|---------|
|Ethernet0|eth0     |
|Ethernet1|Ethernet0|
|Ethernet2|Ethernet4|
|Ethernet3|Ethernet8|

after:
|on GNS3  |in SONiC |
|---------|---------|
|eth0   |eth0       |
|Ethernet0|Ethernet0|
|Ethernet1|Ethernet4|
|Ethernet2|Ethernet8|

Signed-off-by: Masaru OKI <masaru.oki@gmail.com>
2020-06-04 13:29:36 -07:00
Mahesh Maddikayala
fb6916f88b
Update packages and pointers to use SAI1.6 headers. (#4597)
* Update sonic-sairedis (sairedis with SAI 1.6 headers)

* Update SAIBCM to 3.7.4.2, which is built upon SAI1.6 headers

* missed updating BRCM_SAI variable, fixed it

* Update SAIBCM to 3.7.4.2, updated link to libsaibcm

* [Mellanox] Update SAI (release:v1.16.3; API:v1.6)

Signed-off-by: Volodymyr Samotiy <volodymyrs@mellanox.com>

* Update sonic-sairedis pointer to include SAI1.6 headers

* [Mellanox] Update SDK to 4.4.0914 and FW to xx.2007.1112 to match SAI 1.16.3 (API:v1.6)

Signed-off-by: Volodymyr Samotiy <volodymyrs@mellanox.com>

* ensure the veth link is up in docker VS container

* ensure the veth link is up in docker VS container

* [Mellanox] Update SAI (release:v1.16.3.2; API:v1.6)

Signed-off-by: Volodymyr Samotiy <volodymyrs@mellanox.com>

* use 'config interface startup' instead of using ifconfig command, also undid the previous change'

Co-authored-by: Volodymyr Samotiy <volodymyrs@mellanox.com>
2020-05-30 14:23:34 -07:00
Arun Saravanan Balachandran
f0eb1dbc93
DellEMC: Skip thermalctld (S6000, S6100, Z9100 and Z9264) and thermal platform API changes (#4644)
- Skip thermalctld in DellEMC S6000, S6100, Z9100 and Z9264 platforms.
- Change the return type of thermal Platform APIs in DellEMC S6000, S6100, Z9100 and Z9264 platforms to 'float'.
2020-05-27 12:22:55 -07:00
zoe-kuan
fa809c86dc
[platform/delta]: Add a new supported platform, Delta-agc032 (#4602)
* [platform]: Add a new supported platform, Delta-agc032

Switch Vendor: Delta
Switch SKU: Delta-agc032
CPU: BROADWELL-DE
ASIC Vendor: Broadcom
Switch ASIC: Tomahawk3, BCM56980
Port Configuration: 32x400G + 2x10G

- What I did
Add a new Delta platform Delta-agc032.

- How I did it
Add files by following SONiC Porting Guide.

- How to verify it
1. decode-syseeprom
2. sensors
3. psuutil
4. sfputil
5. show interface status
6. bcmcmd

Signed-off-by: zoe-kuan <ZOE.KUAN@deltaww.com>
2020-05-27 09:33:02 -07:00
jostar-yang
f532fb95a9
[accton/as4630-54pe] Fix ypeb-1200am psu_fan dir issue (#4626)
3y Power YPEB-1200am PSU doens't support read fan_dir from pmbus register

Check with vendor this PUS type only support F2B fan direction. So add to show "F2B"
when red psu_fan_dir sysfs.
2020-05-26 12:49:51 -07:00
Junchao-Mellanox
e25c2d984f
[Mellanox] Never disable kernel thermal algorithm at real-time (#4638) 2020-05-26 10:46:29 -07:00
Junchao-Mellanox
f277d13cd6
[Mellanox] Adjust log level to avoid too many thermal logs (#4631)
* Trigger thermal action log only if thermal condition changes
* test file existence before read file content
* fix error for set psu fan speed
* Remove logs because it print too frequently
2020-05-26 10:45:25 -07:00
Guohan Lu
40cb10d2dd [docker-syncd-nephos]: use service dependency in supervisord to start services 2020-05-22 11:01:28 -07:00
Guohan Lu
918cf632f4 [docker-syncd-mrvl]: use service dependency in supervisord to start services 2020-05-22 11:01:28 -07:00
Guohan Lu
7ae67d0dcf [docker-syncd-centec]: use service dependency in supervisord to start services
Signed-off-by: Guohan Lu <lguohan@gmail.com>
2020-05-22 11:01:28 -07:00
Guohan Lu
745f58cde7 [docker-syncd-invm]: use service dependency in supervisord to start services 2020-05-22 11:01:28 -07:00
Guohan Lu
82dc8ace12 [docker-syncd-bfn]: use service dependency in supervisord to start services 2020-05-22 11:01:28 -07:00
Guohan Lu
5664f68bb7 [docker-syncd-mlnx]: use service dependency in supervisord to start services 2020-05-22 11:01:28 -07:00
Guohan Lu
bb40300cad [docker-syncd-brcm]: use service dependency in supervisord to start services 2020-05-22 11:01:28 -07:00
Guohan Lu
ecde1fe1aa [docker-syncd-vs]: use service dependency in supervisord to start services 2020-05-22 11:01:28 -07:00
Wirut Getbamrung
5e5e9ec417
[device/celestica]: DX010 platform API update (#4608)
- Fix fancontrol.service path
- Fix return temp format in thermal API
- Improve init time in chassis API
- Upgrade sfp API
2020-05-22 03:50:43 -07:00