Depends on https://github.com/sonic-net/sonic-linux-kernel/pull/315
#### Why I did it
The name SECURE_UPGRADE_DEV_SIGNING_CERT is misleading, this flag is relevant to both to dev and prod signing.
#### How I did it
Rename all mentions of name SECURE_UPGRADE_DEV_SIGNING_CERT to SECURE_UPGRADE_SIGNING_CERT - this is also done with PR in sonic-linux-kernel repository
#### How to verify it
Build SONiC using your own prod script
Closes#14697
Why I did it
When using the dpkg cache feature, debians referenced under SONIC_ONLINE_DEBS always get downloaded, even if the expected debian package already exists under target/. The runs contrary to the design of Makefiles (where presence of the output file indicates it is already built).
This is also counter to the behavior of the SONiC build when dpkg cache is not enabled, causing further confusion.
This behavior also causes problems when doing local development, where we may want to modify the local debian files when evaluating which changes to push to the HTTP repository storing them (Artifactory). With the current behavior, our local changes are always overwritten.
Work item tracking
Microsoft ADO (number only):
How I did it
The SONIC_ONLINE_DEBS rule now skips downloading debians if they already exist under target/.
How to verify it
Populate target/ with locally modified debian packages. Perform the build. Ensure the local modifications remain intact, and are not overwritten.
#### Why I did it
Implementing code changes for https://github.com/sonic-net/SONiC/pull/1203
#### How I did it
Removed the timers and delayed target since the delayed services would start based on event driven approach.
Cleared port table during config reload and cold reboot scenario.
Modified yang model, init_cfg.json to change has_timer to delayed
#### How to verify it
Running regression
Why I did it
Support to add SONiC OS Version in device info.
It will be used to display the version info in the SONiC command "show version". The version is used to do the FIPS certification. We do not do the FIPS certification on a specific release, but on the SONiC OS Version.
SONiC Software Version: SONiC.master-13812.218661-7d94c0c28
SONiC OS Version: 11
Distribution: Debian 11.6
Kernel: 5.10.0-18-2-amd64
How I did it
Why I did it
Fix#14081
By default DOCKER_BUILDKIT is enabled after docker version 23.0.0
So we need to disable it explicitly if SONIC_USE_DOCKER_BUILDKIT is not set.
Otherwise it will produce larger installable images.
How I did it
set DOCKER_BUILDKIT=0 in slave.mk
How to verify it
Why I did it
It is to fix the issue #13773
It only has impact on the build triggered manually inside of the slave container. Developers can go to the slave container do a build, it will print a skippable error message complaining the variable not found.
How I did it
Add the default value for variable SLAVE_DRI.
How to verify it
- Why I did it
Add Secure Boot support to SONiC OS.
Secure Boot (SB) is a verification mechanism for ensuring that code launched by a computer's UEFI firmware is trusted. It is designed to protect a system against malicious code being loaded and executed early in the boot process before the operating system has been loaded.
- How I did it
Added a signing process to sign the following components:
shim, grub, Linux kernel, and kernel modules when doing the build, and when feature is enabled in build time according to the HLD explanations (the feature is disabled by default).
- How to verify it
There are self-verifications of each boot component when building the image, in addition, there is an existing end-to-end test in sonic-mgmt repo that checks that the boot succeeds when loading a secure system (details below).
How to build a sonic image with secure boot feature: (more description in HLD)
Required to use the following build flags from rules/config:
SECURE_UPGRADE_MODE="dev"
SECURE_UPGRADE_DEV_SIGNING_KEY="/path/to/private/key.pem"
SECURE_UPGRADE_DEV_SIGNING_CERT="/path/to/cert/key.pem"
After setting those flags should build the sonic-buildimage.
Before installing the image, should prepared the setup (switch device) with the follow:
check that the device support UEFI
stored pub keys in UEFI DB
enabled Secure Boot flag in UEFI
How to run a test that verify the Secure Boot flow:
The existing test "test_upgrade_path" under "sonic-mgmt/tests/upgrade_path/test_upgrade_path", is enough to validate proper boot
You need to specify the following arguments:
Base_image_list your_secure_image
Taget_image_list your_second_secure_image
Upgrade_type cold
And run the test, basically the test will install the base image given in the parameter and then upgrade to target image by doing cold reboot and validates all the services are up and working correctly
#### Why I did it
Add support of California-SB237 conformance.
https://github.com/sonic-net/SONiC/tree/master/doc/California-SB237
#### How I did it
Expire user passwords during build
#### How to verify it
Enable build flag and check if default user is prompted for a new password
Why I did it
If make fails, we can't rerun the make process, because existing patches can't apply again.
How I did it
Check if patches are applied. if yes, don't apply patches again.
How to verify it
Why I did it
[Build] Support Debian snapshot mirror to improve build stability
It is to enhance the reproducible build, supports the Debian snapshot mirror. It guarantees all the docker images using the same Debian mirror snapshot and fixes the temporary build failure which is caused by remote Debain mirror indexes changed during the build. It is also to fix the version conflict issue caused by no fixed versions of some of the Debian packages.
How I did it
Add a new feature to support the Debian snapshot mirror.
How to verify it
- Why I did it
The followup to #12920 PR.
If the feature compilation is disabled its configuration should not be included into init_cfg.json.
- How I did it
Update init_cfg.json.j2 template to include teamd and radv features configuration only if their compilation is enabled.
- How to verify it
The default behavior is preserved. To verify the changes compile the image without overriding INCLUDE_TEAMD and INCLUDE_ROUTER_ADVERTISER options. The generated /etc/sonic/init_cfg.json should remain with no changes. Install the image and verify that both teamd and radv containers are present and running. Verify that feature state returned by show feature status command is enabled.
Change the INCLUDE_TEAMD or INCLUDE_ROUTER_ADVERTISER value to "n". Compile and install the image. Verify that feature configuration is not included in generated /etc/sonic/init_cfg.json file. Verify that show feature status output doesn't include the feature.
Why I did it
In PR check pipelines, there are too many duplicated warnings:
fatal: No names found, cannot describe anything.
SONIC_IMAGE_VERSION will not change in one build. We don't need to calculate in every reference. We just need calculate one time, then record it.
In Makefile, '=' will calculate again and again when it is referred.
How I did it
Fix it in Makefile.
How to verify it
Check this PR's check pipeline result.
Why I did it
It's possible to speed up some parts of a build using parallel compression/decompression.
This is especially important for build_debian.sh.
How I did it
pigz is a parallel implementation of gzip: https://zlib.net/pigz/
Some programs like docker and mkinitramfs can automatically detect and use it instead of gzip.
For tar we need to select it directly.
To enable this feature you need to set GZ_COMPRESS_PROGRAM=pigz
Why I did it
It is to fix the broadcom build failure, it is caused by the build image docker-dhcp-relay:latest not found.
2022-12-14T00:09:57.5464893Z [ FAIL LOG START ] [ target/docker-dhcp-relay.gz-load ]
2022-12-14T00:09:57.5466036Z Attempting docker image lock for docker-dhcp-relay load
2022-12-14T00:09:57.5467113Z Obtained docker image lock for docker-dhcp-relay load
2022-12-14T00:09:57.5468206Z Loading docker image target/docker-dhcp-relay.gz
2022-12-14T00:09:57.5469361Z Loaded image: docker-dhcp-relay:internal.65852159-11ad82a07a
2022-12-14T00:09:57.5470686Z Tagging docker image docker-dhcp-relay:latest as docker-dhcp-relay-sonic:latest
2022-12-14T00:09:57.5471997Z Error response from daemon: No such image: docker-dhcp-relay:latest
2022-12-14T00:09:57.5473122Z [ FAIL LOG END ] [ target/docker-dhcp-relay.gz-load ]
2022-12-14T00:09:57.5539792Z make: *** [slave.mk:1180: target/docker-dhcp-relay.gz-load] Error 1
2022-12-14T00:09:57.5540958Z make: *** Waiting for unfinished jobs....
The image had been built succeeded
2022-12-13T17:01:59.9046935Z [ finished ] [ target/docker-eventd.gz ]
2022-12-13T17:02:00.4947165Z [ building ] [ target/docker-dhcp-relay.gz ]
2022-12-13T17:02:00.6688627Z /sonic/dockers/docker-dhcp-relay/cli-plugin-tests /sonic
2022-12-13T17:02:41.1123955Z /sonic
2022-12-13T17:07:04.1786069Z [ finished ] [ target/docker-dhcp-relay.gz ]
But it was tagged by another value:
Obtained docker image lock for docker-dhcp-relay save
Tagging docker image docker-dhcp-relay-sonic:latest as docker-dhcp-relay:internal.65852159-11ad82a07a
Saving docker image docker-dhcp-relay:internal.65852159-11ad82a07a
Released docker image lock for docker-dhcp-relay save
Removing docker image docker-dhcp-relay-sonic:latest
Untagged: docker-dhcp-relay-sonic:latest
target/docker-dhcp-relay.gz
File /dpkg_cache/docker-dhcp-relay.gz-2ddfa01a109ca69b7621f1a-450bae36026d9dee62646f2.tgz saved in cache
[ CACHE::SAVED ] /dpkg_cache/docker-dhcp-relay.gz-2ddfa01a109ca69b7621f1a-450bae36026d9dee62646f2.tgz
How I did it
When the feature SONIC_CONFIG_USE_NATIVE_DOCKERD_FOR_BUILD not enabled, always save as the latest tag, not use the specify version.
The version is dynamic, it is changed when a new commit checked in, but the image of docker-dhcp-relay is not necessary to change.
- Why I did it
This optimization is needed for DPU SONiC. DPU SONiC runs a limited set of containers and teamd and radv containers are not part of them. Unlike the other containers, there was no possibility to disable teamd and radv containers compilation.
To reduce DPU SONiC compilation time and reduce the image size this commit adds the possibility to disable their compilation.
- How I did it
Two new configuration options are added to rules/config file:
INCLUDE_TEAMD
INCLUDE_ROUTER_ADVERTISER
By default to preserve the existing behavior both options are enabled. There are two ways to override them:
To change option value to "n" in rules/config file.
To override their value using SONIC_OVERRIDE_BUILD_VARS env variable:
SONIC_OVERRIDE_BUILD_VARS="SONIC_INCLUDE_TEAMD=y SONIC_INCLUDE_ROUTER_ADVERTISER=n"
- How to verify it
The default behavior is preserved. To verify it compile the image without overriding new options. Install the image and verify that both teamd and radv containers are present and running.
To verify the new options override them with "n" value. Compile and install image. Verify that no docker containers are present. Verify that SWSS can start without errors.
This feature caches all the deb files during docker build and stores them
into version cache.
It loads the cache file if already exists in the version cache and copies the extracted
deb file from cache file into Debian cache path( /var/cache/apt/archives).
The apt-install always installs the deb file from the cache if exists, this
avoid unnecessary package download from the repo and speeds up the overall build.
The cache file is selected based on the SHA value of version dependency
files.
Why I did it
How I did it
How to verify it
* 03.Version-cache - framework environment settings
It defines and passes the necessary version cache environment variables
to the caching framework.
It adds the utils script for shared cache file access.
It also adds the post-cleanup logic for cleaning the unwanted files from
the docker/image after the version cache creation.
* 04.Version cache - debug framework
Added DBGOPT Make variable to enable the cache framework
scripts in trace mode. This option takes the part name of the script to
enable the particular shell script in trace mode.
Multiple shell script names can also be given.
Eg: make DBGOPT="image|docker"
Added verbose mode to dump the version merge details during
build/dry-run mode.
Eg: scripts/versions_manager.py freeze -v \
'dryrun|cmod=docker-swss|cfile=versions-deb|cname=all|stage=sub|stage=add'
* 05.Version cache - docker dpkg caching support
This feature caches all the deb files during docker build and stores them
into version cache.
It loads the cache file if already exists in the version cache and copies the extracted
deb file from cache file into Debian cache path( /var/cache/apt/archives).
The apt-install always installs the deb file from the cache if exists, this
avoid unnecessary package download from the repo and speeds up the overall build.
The cache file is selected based on the SHA value of version dependency
files.
PR #12829 modified the docker tagging scheme such that optional docker
containers would be tagged with the SONiC image version. However, the
docker-image-load macro wasn't updated for these changes. Update it
here.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
pre-compiled bazel is not work in arm64 docker container
shil@2f910d8d37b2:/sonic/src/sonic-p4rt/sonic-pins$ uname -a
Linux 2f910d8d37b2 5.4.0-132-generic #148-Ubuntu SMP Mon Oct 17 16:02:06 UTC 2022 aarch64 GNU/Linux
shil@2f910d8d37b2:/sonic/src/sonic-p4rt/sonic-pins$ bazel
Opening zip "/proc/self/exe": lseek(): Bad file descriptor
FATAL: Failed to open '/proc/self/exe' as a zip file: (error: 9): Bad file descriptor
shil@2f910d8d37b2:/sonic/src/sonic-p4rt/sonic-pins$
During docker build, host files can be passed to the docker build through
docker context files. But there is no straightforward way to transfer
the files from docker build to host.
This feature provides a tricky way to pass the cache contents from docker
build to host. It tar's the cached content and encodes them as base64 format
and passes it through a log file with a special tag as 'VCSTART and VCENT'.
Slave.mk in the host, it extracts the cache contents from the log and stores them
in the cache folder. Cache contents are encoded as base64 format for
easy passing.
<!--
Please make sure you've read and understood our contributing guidelines:
https://github.com/Azure/SONiC/blob/gh-pages/CONTRIBUTING.md
** Make sure all your commits include a signature generated with `git commit -s` **
If this is a bug fix, make sure your description includes "fixes #xxxx", or
"closes #xxxx" or "resolves #xxxx"
Please provide the following information:
-->
#### Why I did it
#### How I did it
#### How to verify it
Fixes: #11521
- Why I did it
When build SONiC dockers, SONiC build system tags all of them with latest tag. This is Ok for all built-in dockers because we will also tag them with image version tag in sonic_debian_extension.j2 script. On the other hand, some of these dockers are SONiC packages and they are installed by sonic-package-manager which creates a only one tag whcih is recorded in the corresponding .gz file. This leads to having these dockers tagged only with latest tag. This change saves the tag as an image version string in .gz file, so that these dockers have version identification in their tag.
- How I did it
I modified slave.mk to save the version tag instead of latest tag.
- How to verify it
I verified this change by running show version
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Why I did it
Provide GNMI native write interface for configuration.
How I did it
Add configuration parameters for GNMI native write.
How to verify it
Check build pipeline.
Why I did it
Unify the Debian mirror sources
Make easy to upgrade to the next Debian release, not source url code change required.
Support to customize the Debian mirror sources during the build
Relative issue: #12523
Why I did it
[Build] Fix the docker-sync not found issue
How I did it
When SONIC_CONFIG_USE_NATIVE_DOCKERD_FOR_BUILD not enabled, not to remove the docker-sync tag.
#### Why I did it
Currently at the Azure build system, the P4RT container is disabled by default at the build time. Here the goal is to include the P4RT container at the build time while disabling it at the runtime. The user can enable/disable the p4rt app through the config based on the preference.
#### How I did it
Changed the config in rules/config and init-cfg.json.j2
Why I did it
Add the original docker tag without username to support some of the docker file not changed build broken issue.
The username suffix only required when the native build feature enabled, but if not enabled, the docker file not necessary to change, the build should be succeeded.
It is to support cisco 202205 build.
Remove swsssdk from sonic OS image and docker image
#### Why I did it
swsssdk is deprecated, so need remove from image.
#### How I did it
Update config file to remove swsssdk from image.
#### How to verify it
Pass all test case.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
#### Description for the changelog
Remove swsssdk from sonic OS image and docker image
#### Ensure to add label/tag for the feature raised. example - PR#2174 under sonic-utilities repo. where, Generic Config and Update feature has been labelled as GCU.
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->
#### A picture of a cute animal (not mandatory but encouraged)
- The Makefile.work becomes complex and it is very difficult to manage the changes across branches.
- Restructured the Makefile.work and it becomes more readable.
- Added $(QUIET) option to turn on command echo mode through command line option.
- Exported the SONIC_BUILD_VARS variable, through which make options can be set dynamically.
Eg: make SONIC_BUILD_VARS='INCLUDE_NAT=y'
Why I did it
Replace configuration parameter for gnmi write, and we will add other gnmi write features in the future.
How I did it
Update rules/config and other Makefile.
How to verify it
Build sonic image.
With this PR in, you flap BGP and use events_tool to see the published events.
With telemetry PR #111 in and corresponding submodule update done in buildimage, one could run gnmi_cli to capture BGP flap events.
The current error handling code for when a deb package fails to be
installed currently has a chain of commands linked together by && and
ends with `exit 1`. The assumption is that the commands would succeed,
and the last `exit 1` would end it with a non-zero return code, thus
fully failing the target and causing the build to stop because of bash's
-e flag.
However, if one of the commands prior to `exit 1` returns a non-zero
return code, then bash won't actually treat it as a terminating error.
From bash's man page:
```
-e Exit immediately if a pipeline (which may consist of a single simple
command), a list, or a compound command (see SHELL GRAMMAR above),
exits with a non-zero status. The shell does not exit if the
command that fails is part of the command list immediately
following a while or until keyword, part of the test following the
if or elif reserved words, part of any command executed in a && or
|| list except the command following the final && or ||, any
command in a pipeline but the last, or if the command's return
value is being inverted with !. If a compound command other than a
subshell returns a non-zero status because a command failed while
-e was being ignored, the shell does not exit.
```
The part `part of any command executed in a && or || list except the
command following the final && or ||` says that if the failing command
is not the `exit 1` that we have at the end, then bash doesn't treat it
as an error and exit immediately. Additionally, since this is a compound
command, but isn't in a subshell (subshell are marked by `(` and `)`,
whereas `{` and `}` just tells bash to run the commands in the current
environment), bash doesn't exist. The result of this is that in the
deb-install target, if a package installation fails, it may be
infinitely stuck in that while-loop.
There are two fixes for this: change to using a subshell, or use `;`
instead of `&&`. Using a subshell would, I think, require exporting any
shell variables used in the subshell, so I chose to change the `&&` to
`;`. In addition, at the start of the subshell, `set +e` is added in,
which removes the exit-on-error handling of bash. This makes sure that
all commands are run (the output of which may help for debugging) and
that it still exits with 1, which will then fully fail the target.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Add k8s master feature
Signed-off-by: Yun Li <yunli1@microsoft.com>
* Update kubernetes version mistake and make variable passing clear
Signed-off-by: Yun Li <yunli1@microsoft.com>
* Add CRI-dockerd package
Signed-off-by: Yun Li <yunli1@microsoft.com>
* Update version variable passing logic
Signed-off-by: Yun Li <yunli1@microsoft.com>
* Upgrade the worker kubernetes version
Signed-off-by: Yun Li <yunli1@microsoft.com>
* Install xml file parse tool
Signed-off-by: Yun Li <yunli1@microsoft.com>
Signed-off-by: Yun Li <yunli1@microsoft.com>
* Ported Marvell armhf build on x86 for debian buster to use cross-compilation instead of qemu emulation
Current armhf Sonic build on amd64 host uses qemu emulation. Due to the
nature of the emulation it takes a very long time, about 22-24 hours to
complete the build. The change I did to reduce the building time by
porting Sonic armhf build on amd64 host for Marvell platform for debian
buster to use cross-compilation on arm64 host for armhf target. The
overall Sonic armhf building time using cross-compilation reduced to
about 6 hours.
Signed-off-by: marvell <marvell@cpss-build3.marvell.com>
* Fixed final Sonic image build with dockers inside
* Update Dockerfile.j2
Fixed qemu-user-static:x86_64-aarch64-5.0.0-2 .
* Update cross-build-arm-python-reqirements.sh
Added support for both armhf and arm64 cross-build platform using $PY_PLAT environment variable.
* Update Makefile
Added TARGET=<cross-target> for armhf/arm64 cross-compilation.
* Reviewer's @qiluo-msft requests done
Signed-off-by: marvell <marvell@cpss-build3.marvell.com>
* Added new radius/pam patch for arm64 support
* Update slave.mk
Added missing back tick.
* Added libgtest-dev: libgmock-dev: to the buster Dockerfile.j2. Fixed arm perl version to be generic
* Added missing armhf/arm64 entries in /etc/apt/sources.list
* fix libc-bin core dump issue from xumia:fix-libc-bin-install-issue commit
* Removed unnecessary 'apt-get update' from sonic-slave-buster/Dockerfile.j2
* Fixed saiarcot895 reviewer's requests
* Fixed README and replaced 'sed/awk' with patches
* Fixed ntp build to use openssl
* Unuse sonic-slave-buster/cross-build-arm-python-reqirements.sh script (put all prebuilt python packages cross-compilation/install inside Dockerfile.j2). Fixed src/snmpd/Makefile to use -j1 in all cases
* Clean armhf cross-compilation build fixes
* Ported cross-compilation armhf build to bullseye
* Additional change for bullseye
* Set CROSS_BUILD_ENVIRON default value n
* Removed python2 references
* Fixes after merge with the upstream
* Deleted unused sonic-slave-buster/cross-build-arm-python-reqirements.sh file
* Fixed 2 @saiarcot895 requests
* Fixed @saiarcot895 reviewer's requests
* Removed use of prebuilt python wheels
* Incorporated saiarcot895 CC/CXX and other simplification/generalization changes
Signed-off-by: marvell <marvell@cpss-build3.marvell.com>
* Fixed saiarcot895 reviewer's additional requests
* src/libyang/patch/debian-packaging-files.patch
* Removed --no-deps option when installing wheels. Removed unnecessary lazy_object_proxy arm python3 package instalation
Co-authored-by: marvell <marvell@cpss-build3.marvell.com>
Co-authored-by: marvell <marvell@cpss-build2.marvell.com>
Refactors the SONiC Installer to support greater flexibility in building for a given architecture and bootloader.
#### Why I did it
Currently the SONiC installer assumes that if a platform is ARM based that it uses the `uboot` bootloader and uses the `grub` bootloader otherwise. This is not a correct assumption to make as ARM is not strictly tied to uboot and x86 is not strictly tied to grub.
#### How I did it
To implement this I introduce the following changes:
* Remove the different arch folders from the `installer/` directory
* Merge the generic components of the ARM and x86 installer into `installer/installer.sh`
* Refactor x86 + grub specific functions into `installer/default_platform.conf`
* Modify installer to call `default_platform.conf` file and also call `platform/[platform]/patform.conf` file as well to override as needed
* Update references to the installer in the `build_image.sh` script
* Add `TARGET_BOOTLOADER` variable that is by default `uboot` for ARM devices and `grub` for x86 unless overridden in `platform/[platform]/rules.mk`
* Update bootloader logic in `build_debian.sh` to be based on `TARGET_BOOTLOADER` instead of `TARGET_ARCH` and to reference the grub package in a generic manner
#### How to verify it
This has been tested on a ARM test platform as well as on Mellanox amd64 switches as well to ensure there was no impact.
#### Description for the changelog
[arm] Refactor installer and build to allow arm builds targeted at grub platforms
#### Link to config_db schema for YANG module changes
N/A
- Why I did it
Implemented sonic-net/SONiC#1001
- How I did it
Install systemd-bootchart tool and provide default config for it.
- How to verify it
Run build and verify systemd-bootchart is installed.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
* [sflow + dropmon] added INCLUDE_SFLOW_DROPMON flag, added patches for hsflowd
*Added a capability of monitoring dropped packets for the sFlow daemon in order to improve network - monitoring, diagnostic, and troubleshooting. The drop monitor service allows the sFlow daemon to export another type of sample - dropped packets as Discard samples alongside Counter samples and Packet Flow samples.
Signed-off-by: Vadym Hlushko <vadymh@nvidia.com>
Why I did it
The docker storage driver vfs is not a good option for build, it uses the “deep copy” when building a new layer, leads to lower performance and more space used on disk than other storage drivers.
A better docker storage driver is the default one overlay2, it is a modern union filesystem.
#### Why I did it
Fix sonic-db-cli high CPU usage on SONiC startup issue: https://github.com/Azure/sonic-buildimage/issues/10218
ETA of this issue will be 2022/05/31
#### How I did it
Re-write sonic-cli with c++ in sonic-swss-common: https://github.com/Azure/sonic-swss-common/pull/607
Modify swss-common rules and slave.mk to install c++ version sonic-db-cli.
#### How to verify it
Pass all E2E test scenario.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
#### Description for the changelog
Build and install c++ version sonic-db-cli from swss-common.
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/SONiC/wiki/Configuration.
-->
#### A picture of a cute animal (not mandatory but encouraged)
Some places were not correctly setting the HTTPS proxy, and were only
setting the HTTP proxy. This was fine until Docker 20.10.10, which then
started using `https_proxy` for HTTPS connections.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
- Why I did it
Profiling the system state on init after fast-reboot during create_switch function execution, it is possible to see few python scripts running at the same time.
This parallel execution consume CPU time and the duration of create_switch is longer than it should be.
Following this finding, and the motivation to ensure these services will not interfere in the future, LLDP is delayed in 90 seconds until the system finish the init flow after fastboot.
- How I did it
Add a timer for LLDP service.
Copy the timer file to the host bin image.
- How to verify it
Run fast-reboot on MLNX platform and observe faster create_switch execution time.
This PR is dependent on PR: #10567
Currently, the build dockers are created as a user dockers(docker-base-stretch-<user>, etc) that are
specific to each user. But the sonic dockers (docker-database, docker-swss, etc) are
created with a fixed docker name and common to all the users.
docker-database:latest
docker-swss:latest
When multiple builds are triggered on the same build server that creates parallel building issue because
all the build jobs are trying to create the same docker with latest tag.
This happens only when sonic dockers are built using native host dockerd for sonic docker image creation.
This patch creates all sonic dockers as user sonic dockers and then, while
saving and loading the user sonic dockers, it rename the user sonic
dockers into correct sonic dockers with tag as latest.
docker-database:latest <== SAVE/LOAD ==> docker-database-<user>:tag
The user sonic docker names are derived from 'DOCKER_USERNAME and DOCKER_USERTAG' make env
variable and using Jinja template, it replaces the FROM docker name with correct user sonic docker name for
loading and saving the docker image.
* [build]: Patch debootstrap to not unmount the host's /proc filesystem
Currently, when the final image is being built (sonic-vs.img.gz,
sonic-broadcom.bin, or similar), each invocation of sudo in the
build_debian.sh script takes 0.8 seconds to run and execute the actual
command. This is because the /proc filesystem in the slave container has
been unmounted somehow. This is happening when debootstrap is running,
and it incorrectly unmounts the host's (in our case, the slave
container's) /proc filesystem because in the new image being built,
/proc is a symlink to the host's (the slave container's) /proc. Because
of that, /proc is gone, and each invocation of sudo adds 0.8 seconds
overhead. As a side effect, docker exec into the slave container during
this time will fail, because /proc/self/fd doesn't exist anymore, and
docker exec assumes that that exists.
Debootstrap has fixed this in 1.0.124 and newer, so backport the patch
that fixes this into the version that Bullseye has.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* [build_debian.sh]: Use eatmydata to speed up deb package installations
During package installations, dpkg calls fsync multiples times (for each
package) to ensure that tht efiles are written to disk, so that if
there's some system crash during package installation, then it is in at
least a somewhat recoverable state. For our use case though, we're
installing packages in a chroot in fsroot-* from a slave container and
then packaging it into an image. If there were a system crash (or even
if docker crashed), the fsroot-* directory would first be removed, and
the process would get restarted. This means that the fsync calls aren't
really needed for our use case.
The eatmydata package includes a library that will block/suppress the
use of fsync (and similar) system calls from applications and will
instead just return success, so that the application is not blocked on
disk writes, which can instead happen in the background instead as
necessary. If dpkg is run with this library, then the fsync calls that
it does will have no effect.
Therefore, install the eatmydata package at the beginning of
build_debian.sh and have dpkg be run under eatmydata for almost all
package installations/removals. At the end of the installation, remove
it, so that the final image uses dpkg as normal.
In my testing, this saves about 2-3 minutes from the image build time.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Change ln syntax to use chroot
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
To sign SONiC kernel image and allow secure boot based system to verify SONiC image before loading into the system.
How I did it
Pass following parameter to rules/config.user
Ex:
SONIC_ENABLE_SECUREBOOT_SIGNATURE := y
SIGNING_KEY := /path/to/key/private.key
SIGNING_CERT := /path/to/public/public.cert
How to verify it
Secure boot enabled system enrolled with right public key of the, image in the platform UEFI database will able to verify image before load.
Alternatively one can verify with offline sbsign tool as below.
export SBSIGN_KEY=/abc/bcd/xyz/
sbverify --cert $SBSIGN_KEY/public_cert.cert fsroot-platform-XYZ/boot/vmlinuz-5.10.0-8-2-amd64 mage
O/P:
Signature verification OK
