Users can install docker with sudo, and it requires sudo to issue docker command. This will cause few errors in Makefile.work which need use docker without sudo.
mellanox simx platform don't have QSFP sysfs created, this script will cause timeout issue on simx platform
Signed-off-by: Kebo Liu <kebol@mellanox.com>
* [kernel] Upgrade kernel to version 4.9.168-1+deb9u5
- Picking up security patches.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* advance linux-kernel sub module head
* [docker-fpm-frr]: Generate separated staticd.conf for staticd
Generate staticd.conf by templates/staticd.conf.j2 with config DB data
* [docker-fpm-frr]: Remove default_route block from zebra.conf.j2
default_route block already moved to staticd.conf.j2
* [docker-fpm-frr]: Add test for staticd.conf.j2 template
* Add test for staticd.conf.j2 template
* Correct the sample output of zebra.conf.j2 template
* Fix a typo in test_zebra_frr
* [docker-fpm-frr]: Fix test_j2files test errors
* Fix test errors in test_j2files.py and test_j2files_t2_chassis_fe.py
* Fix typo in test_j2files_t2_chassis_fe.py
radv should be left alone during warm restart of swss. Otherwise it will
announce departure and cause hosts to lose default gateway.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
- Improve smbus reliability for all platforms
- Delay processing of the reboot cause to reduce critical path
- Add support of get_change_event for PSUs
Added exceptions handling for BFN psuutil.py and eeprom.py which are raised when syseepromd and psud try to connect to the BFN thrift server which is not up yet. Now the exceptions backtrace is not logged to the syslog. Also psud doesn't exit on system bootup due to uncaught exception.
Signed-off-by: Vitaliy Senchyshyn <vsenchyshyn@barefootnetworks.com>
* Change psu driver to comfort to lm-sensors.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Duplicate fan attributes with naming conforming to lm-sensors.
Replace psu drivers.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Revise cpr_4011_4mxx.c to support lm-sensors.
Signed-off-by: roy_lee <roy_lee@accton.com>
* slave.mk
* .gitignore
The SONIC_PYTHON_STDEB_DEBS group is part of SONIC_CLEAN_DEBS
for cleaning with 'make clean', but this group is overlooked
since they reside in PYTHON_DEBS_PATH, not DEBS_PATH. This
fix creates a separate clean rule for SONIC_PYTHON_STDEB_DEBS.
Also noticed the .arch file showing up on 'git status' so
added it to .gitignore.
Signed-off-by: Greg Paussa <greg.paussa@broadcom.com>
ndisc6 gathers a few diagnostic tools for IPv6 networks including:
- ndisc6, which performs ICMPv6 Neighbor Discovery in userland,
- rdisc6, which performs ICMPv6 Router Discovery in userland,
- rltraceroute6, a UDP/ICMP IPv6 implementation of traceroute,
- tcptraceroute6, a TCP/IPv6-based traceroute implementation,
- tcpspray6, a TCP/IP Discard/Echo bandwidth meter,
- addrinfo, easy script interface for hostname and address resolution,
- dnssort, DNS sorting script.
Signed-off-by: Guohan Lu <gulv@microsoft.com>
[sairedis]:
ARM32 bit fixes, for 64bit printf format specifier (#490)
fix wrong API type , add cmdline parse option , remove unuseful api call (#499)
Use pointer to member function to reduce the footprint of collectCounters() (#488)
[syncd] Add support for Innovium platform (#496)
[saisdkdump]: Fix dump generation crash (#493)
[swss]:
Add scope attribute to VNET table. (#954)
[portsyncd]: Fix portsyncd restart case (#1019)
[vnet]: Enable "vnet_orch_1" VS test case (#1020)
[vlan] Add pytest cases to validate the behavior about add LAG member to vlan. (#875)
[policerorch]: Add the capability to update policer rate/size (#1017)
[aclorch]: Add MIRRORv6 support for NPS platform (#1018)
[orchagent]: Avoid crash by setting g_syncMode flag before create_switch (#1014)
[orchagent] Add support for Innovium platform (#1005)
Provide broadcast IP while configuring interface ip address (#1007)
[VLAN] Add pytest cases to validate different use-case of tagging_mode. (#860)
[vstest]: Add test_port_config.py which include breakout port test. (#866)
[vstests]: change 'test_acl_egress_table.py' to UNIX format (#1010)
[vlan] Add pytest cases to verify data in app db and state db. (#895)
[vstest]: Add the CRM tests (#1013)
[warm-reboot]: add bgp eoiu support to speed up route reconcile (#856)
[fdborch] support mac update (#877)
[vxlanorch] Fix Logic of Vxlan tunnel removal (#995)
Fix VLAN error introduced with new 4.9 kernel behavior (#1001)
Config DB manual is being moved from Wiki to SWSS repo (#1002)
Trap DHCPv6 packets for supporting ZTP over in-band interfaces using … (#997)
Signed-off-by: Andriy Kokhan <akokhan@barefootnetworks.com>
* [DELL][Z9100,S6100,S6000] Platform 2.0 SFP Changes
Added support in sfp.py file which will be generic. Send the eeprom path and sfp_control path from chassis.py
Present: Servers are listed in the same order as in redis-db
Fix: Save the sort o/p, hence use sorted list to write into pam.d's conf.
As well convert priority to integer for use by sort.
* Enable debug image build for kvm image.
* Fix a bug in cleaning up requests referring the netsmp_session being closed to avoid a crash, during netsnmp_session close/abort due to timeout.
RCA:
The netsnmp_agent_session requests use netsmp_subtree objects that matches the associated variable name.
The netsnmp_subtrees created through a netsnmp_session are tied to that session.
When a subagent connection is closed/dropped due to timeout, all associated netsnmp_subtree objects are fred.
Hence during a netsnmp_session close, all the delegated netsnmp_agent_sessions are scanned for requets that could be using netsnmp_subtree objects associated with this netsnmp_sesssion or its subsession. For each of the found request, they are explicitly marked to fail and a call is made to complete them.
But due to the bug in scanning, it leaves behind requests and hence later when the requests get processed, they refer the *now* freed netsnmp_subtree. As often these requests gets completed pretty soon, they escape crashing. But if it so happens that the freed memory happened to complete a memory unit, hence returned to kernel or it got reallocated & changed enough to crash, the snmpd crashes.
* Revert the changes
* Revert
* [service dependent] describe non-warm-reboot dependency outside systemctl
When dependency was described with systemctl, it will kick in all the time,
including under warm reboot/restart scenarios. This is not what we always
want. For components that are capable of warm reboot/start, they need to
describe dependency in service files.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* [service] teamd service should not require swss service
Adding require swss will cause teamd to be killed by systemctl when swss
stops. This is not what we want in warm reboot.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* refactoring code
* rename functions to match other functions in the file
