Why I did it
Currently sonic-slave-* tag is confusing. Set correct tag on sonic-slave-* image.
Fix job name to fit the build.
How I did it
build amd image in amd64:
sonic-slave-bullseye:cfe29bff67c
sonic-slave-bullseye:latest
sonic-slave-bullseye:master
build armhf image in amd64:
sonic-slave-bullseye-march-armhf:33614806dc3
sonic-slave-bullseye-march-armhf:latest
sonic-slave-bullseye-march-armhf:master
build arm64 image in amd64:
sonic-slave-bullseye-march-arm64:f3b1b16c801
sonic-slave-bullseye-march-arm64:latest
sonic-slave-bullseye-march-arm64:master
build arm64 image in arm64:
sonic-slave-bullseye:75cb326c9a7
sonic-slave-bullseye-arm64:latest
sonic-slave-bullseye:master
build armhf image in armhf:
sonic-slave-bullseye:64d178951fc
sonic-slave-bullseye-armhf:latest
sonic-slave-bullseye:master
How to verify it
Why I did it
why
In order to apply different config across different platform, and use the code with a unified format, reuse syncd init script to init saiserver.
How I did it
how
Reuse syncd init script
How to verify it
Test
Test in DUT s6000 and dx010 with sonic 202205
Why I did it
1.50.x SDK based drop to fix MIGSMSFT-120 ([8102] Orchagent crash as addRoutePost failed at SAI")
How I did it
Update cisco-8000 submodule to v0.121
Why I did it
Makefile needs some dependencies from the Internet. It will fail for network related issue.
Retries will fix most of these issues.
How I did it
Add retries when running commands which maybe related with networking.
How to verify it
- Why I did it
Update SDK/FW version - 4.5.3196/2010_3196 in order to have the following fixes:
1. ON SPC2/3 in some cases, after many ACL region resize will corrupt internal DB that in return will fail future ACLs configuration
2.. Lag Port as Analyzer Port | when removing port from distributer list SDK does not reselect another port for mirroring
3. Due to critical race at initial configuration, SDK RDQ test may test RDQ configured for WJH and fail the test
Add support for new HW SKU of SN4700
- How I did it
Update pointer for the SDK/FW
- How to verify it
Run regression tests
What I did:
Updated Jinja Template to enable BGP Graceful Restart based on device role. By default it will be enable only if the device role type is TorRouter.
Why I did:-
By default FRR is configured in Graceful Helper mode. Graceful Restart is needed on T0/TorRouter only since the device can go for warm-reboot. For T1/LeafRouter it need to be in Helper mode only
Why I did it
enable sai-ptf logger in sai_adapter to log all the sai api invcations
How I did it
add build parameter to enable the sai-ptf logger when build sai PRC
How to verify it
local build test
test the generated sai_adapter
test with pipeline
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
Previously, we set timeout in each step such as Lock testbed, Prepare testbed, Run test and KVM dump. When some issue suck like retry happens in one step, it will cause timeout error, but actually, it only needs more time to success. In this pr, we remove the timeout limit in each step and control the timeout outside in each job. When the job runs more than four hours, it will be cancelled.
Why I did it
Previously, we set timeout in each step such as Lock testbed, Prepare testbed, Run test and KVM dump. When some issue suck like retry happens in one step, it will cause timeout error, but actually, it only needs more time to success. In this pr, we remove the timeout limit in each step and control the timeout outside in each job. When the job runs more than four hours, it will be cancelled.
How I did it
Remove the timeout parameter in each step, and control the timeout outside in each job.
Signed-off-by: Yutong Zhang <yutongzhang@microsoft.com>
In order to make the sai update easier, change the URL pattern to a more unified format, which can be update automated latter.
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
# Why I did it
Publish docker saiserverv2 in the build pipeline.
# How I did it
Add docker saiserverv2 target in the build template.
# How to verify it
Run test in #12836 and the target has been built out successfully.
Signed-off-by: zitingguo-ms <zitingguo@microsoft.com>
Previously, we hard code the min and max numbers of instance in a plan. In this pr, we support passing the instance numbers of a testplan.
Why I did it
Previously, we hard code the min and max numbers of instance in a plan. In this pr, we support passing the instance numbers of a testplan.
How I did it
Use a variable to set the instance number.
Signed-off-by: Neetha John <nejo@microsoft.com>
This is to backport #12626
Why I did it
There is a need to have separate profiles on compute and storage and this infra update will help achieve that
How I did it
Moved buffer pool/profile and qos definitions on TD2 to a common folder and all TD2 hwsku's will reference that folder
bugfix[2024] vnet route check exit code fix.
Show tech save file to skip non-file entries in cisco-8000 platform
[armhf][sonic-installer] [cherry-pick to branch 202012] Fix the issue of sonic-installer list after set-default and cleanup
[show][muxcable] Catch port Value error exception
[dualtor][202012] Send arp/ndp packets from vlan_mac if the device is dualtor
[show] vnet advertised-route command
[show][muxcable] add support for show mux firmware version all
Signed-off-by: Kevin(Shengkai) Wang <shengkaiwang@microsoft.com>
Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
Why I did it
Arista 7060 platform has a rare and unreproduceable PCIe timeout that could possibly be solved with increasing the switch PCIe timeout value. To do this we'll call a script for this platform to increase the PCIe timeout on boot-up.
No issues would be expected from the setpci command. From the PCIe spec:
"Software is permitted to change the value in this field at any
time. For Requests already pending when the Completion
Timeout Value is changed, hardware is permitted to use either
the new or the old value for the outstanding Requests, and is
permitted to base the start time for each Request either on when
this value was changed or on when each request was issued. "
How I did it
Add "platform-init" support in swss docker similar to how "hwsku-init" is called, only this would be for any device belonging to a platform. Then the script would reside in device data folder.
Additionally, add pciutils dependency to docker-orchagent so it can run the setpci commands.
How to verify it
On bootup of an Arista 7060, can execute:
lspci -vv -s 01:00.0 | grep -i "devctl2"
In order to check that the timeout has changed.
#### Why I did it
To fix https://github.com/Azure/sonic-buildimage/issues/9643
#### How I did it
Instead of ast.literal_eval added python2 compat code for json strings unicode -> str convertion.
We need python2 compatibility since py2 sonic config engine (buster/sonic_config_engine-1.0-py2-none-any.whl target) is still included into the build (ENABLE_PY2_MODULES flag is set for buster). Once we abandon buster and python2, this compat and ast.literal_eval could be cleaned up all through the code base.
#### How to verify it
run steps from the linked issue
Why I did it
The current lazy installer relies on a filename sort for both unpack and configuration steps. When systemd services are configured [started] by multiple packages the order is by filename not by the declared package dependencies. This can cause the start order of services to differ between first-boot and subsequent boots. Declared systemd service dependencies further exacerbate the issue (e.g. blocking the first-boot script).
The current installer leaves packages un-configured if the package dependency order does not match the filename order.
This also fixes a trivial bug in [Build]: Support to use symbol links for lazy installation targets to reduce the image size #10923 where externally downloaded dependencies are duplicated across lazy package device directories.
How I did it
Changed the staging and first-boot scripts to use apt-get:
dpkg -i /host/image-$SONIC_VERSION/platform/$platform/*.deb
becomes
apt-get -y install /host/image-$SONIC_VERSION/platform/$platform/*.deb
when dependencies are detected during image staging.
How to verify it
Apt-get critical rules
Add a Depends= to the control information of a package. Grep the syslog for rc.local between images and observe the configuration order of packages change.
Why I did it
1.57.x SDK based incremental drop that addresses a few egress ACL and drop counter failures. Hostname, vtysh, and incorrect queue watermark issue are addressed too.
How I did it
Update cisco-8000 submodule to v0.2.3
How to verify it
Which release branch to backport (provide reason below if selected)
* Fix kube mode to local mode long duration issue
* Remove IPV6 parameters which is not necessary
* Fix read node labels bug
* Tag the running image to latest if it's stable
* Disable image_version_higher check
* Change image_version_higher checker test case
Signed-off-by: Yun Li <yunli1@microsoft.com>
#### Why I did it
Include below commits
```
00b4dc0 2022-11-14 | Remove error logging on "failed in fdb_vlanmac" (#272) [Qi Luo]
792afe8 2022-11-14 | Don't cache the vlan-id if it is not valid from DB (#273) [zhenggen-xu]
```
Add dualtor test jobs using TestbedV2 in 202012 branch.
Why I did it
Add dualtor test jobs using TestbedV2 in 202012 branch.
How I did it
Add dualtor test jobs using TestbedV2 in 202012 branch.
Signed-off-by: Yutong Zhang <yutongzhang@microsoft.com>
Why I did it
nameserver and domain entries from build system fsroot gets into sonic image.
How I did it
Clear /etc/resolv.conf before building image
How to verify it
Built image with it and verified with install that /etc/resolv.conf is empty
git log --oneline aacb772..202012
these commits are added in sonic-platform-daemons
8ec96c0 (HEAD -> 202012, origin/202012) [ycabled] fix exception-handling logic for ycabled (#312)
3d5470d [ycabled] move swsscommon API's from subroutines to call them exactly once per task_worker/thread (#310)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
