#### Why I did it
resolves https://github.com/Azure/sonic-buildimage/issues/8779
snmpd writes the below error message in syslog :
snmp#snmpd[27]: truncating integer value > 32 bits
This message is written in syslog when the hrSystemUptime(1.3.6.1.2.1.25.1.1.0 / system uptime) or sysUpTime(1.3.6.1.2.1.1.3 network management portion or snmpd uptime) is queried when either of these counters overflow beyond 32 bit value. This happens the device uptime or snmpd uptime is more than 497 days.
#### How I did it
Reference: https://access.redhat.com/solutions/367093 and https://linux.die.net/man/1/snmpcmd
To avoid seeing this message if the counter grows, the snmpd error log level is changed to display LOG_EMERG, LOG_ALERT, LOG_CRIT, and LOG_DEBUG.
Without this change, LOG_ERR and LOG_WARNING would also be logged in syslog.
#### How to verify it
On a device which is up for more than 497 days, modify supervisord.conf with the change and restart snmp.
Query 1.3.6.1.2.1.1.3 and verify that log message is not seen.
Enable pca954x idle_disconnect to avoid possible I2C device address conflict.
How I did it
Change pca954x device_attr idle_state to -2 (MUX_IDLE_DISCONNECT).
How to verify it
Cat pca954x device_attr idle_state and confirm the value is -2.
Signed-off-by: Sean Wu <sean_wu@edge-core.com>
#### Why I did it
AAA yang model is not up to date.
#### How I did it
Add fallback and trace field, and replace boolean_type
#### How to verify it
Run UT for sonic_yang_models.
Follow the steps from #9710
Why I did it
Config db schema generated by minigraph can’t pass yang validation, bgp_asn must not be None.
How I did it
Update sampe-voq-graph.xml to add bgp_asn.
How to verify it
Build sonic-config-engine.
Run command 'sonic-cfggen -m tests/sample-voq-graph.xml -p tests/voq-sample-port-config.ini --print-data', and check bgp_asn.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Update the sonic-swss submodule. The following are new commits in the submodule.
6dae6b8 Add initial value for weight in overlay nexthops (#2096)
d3cd402 [p4rt-tests] Bind response consumer to appl_state_db (#2105)
43e54e5 Fix armhf buildimage artifacts not found issue (#2107)
How I did it
Update the swss submodule pointer.
Provide the changes required for supporting the "show-techsupport" command via the SONiC Management Framework front end mechanisms (CLI, REST, and gNOI). The Management Framework functionality implemented by this PR improves on the the capabilities currently provided by the SONiC Click CLI interface via the "show techsupport" command by providing the following additional features:
- User-friendly "help" information describing command syntax details for CLI invocation.
- Ability to invoke the command via REST and gNOI mechanisms.
Unit test results are attached to this PR.
Fixes#9561Fixes#9570Fixes#9563
Partial fix for #9556
#### Why I did it
- Attributes for dual ToR configs lack YANG model support
#### How I did it
- Extend YANG tests to cover dual ToR use cases
- Extend YANG model to cover dual ToR use cases
- Reduce the default log level to warning so only test failures are printed
#### How to verify it
- Run the YANG model unit tests
Why I did it
Add YANG model file for table VLAN_SUB_INTERFACE
How I did it
Add YANG model file sonic-vlan-sub-interface.yang to describe data structure
modify existing unit-test to cover vlan sub interface
How to verify it
Build sonic-yang-models and sonic-yang-mgmt without errors
Correct thrift.0.13.0 dependent package name.
In previous code, the buildout target was named as PYTHON3_THRIFT_0_13_0
But when add the prackage to LIBTHRIFT_0_13_0, it typo as PYTHON_THRIFT_0_13_0
Signed-off-by: Roman Savchuk romanx.savchuk@intel.com
Why I did it
Update SDK with fixed for warmboot tofino2
Added platform interface extension
How I did it
Create new package for Y2, Y1, X2, X1 profiles
How to verify it
Run test suites from sonic-mgmt repo
#### Why I did it
It should be handled by `ConfigDBConnector.typed_to_raw()`.
This is a bug for `sonic-cfggen -m --print-data` only
```
"PORTCHANNEL_MEMBER": {
"PortChannel0001|Ethernet112": {
"NULL": "NULL"
},
"PortChannel0002|Ethernet116": {
"NULL": "NULL"
},
"PortChannel0003|Ethernet120": {
"NULL": "NULL"
},
"PortChannel0004|Ethernet124": {
"NULL": "NULL"
}
},
```
But not appears in `sonic-cfgen -d --print-data`.
```
"PORTCHANNEL_MEMBER": {
"PortChannel0001|Ethernet112": {},
"PortChannel0002|Ethernet116": {},
"PortChannel0003|Ethernet120": {},
"PortChannel0004|Ethernet124": {}
},
```
Tested in a T0 KVM.
On a multi-asic Supervisor card, running commands like
'show interface counter' opens a confid_db connection per
namespace per interface which results in many duplicate connections
exceeding the allowed open file handles. This causes the command to fail.
Caching the connections to prevent duplicate handles.
When the package name with special characters, such as +, the package name may be encoded as %2b, the package url will not be found when reproducible build enabled.
Since ++ is treated as a regex by apt-get, make sure the development
headers and the Java bindings for grpc don't get installed as well.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
The SAI credo libraries don't depend on that library. This saves about
36MB of disk storage space.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
Config db schema generated by minigraph can’t pass yang validation, portchannel_member has invalid port.
How I did it
Update test minigraph to remove invalid port channel.
How to verify it
Build sonic-config-engine.
Run command 'sonic-cfggen -m xxx.xml --print-data', and check port channel member.
Signed-off-by: Gang Lv ganglv@microsoft.com
Add docker-syncd-centec-rpc and docker-saiserver-centec to buster docker image list. These 2 docker images are based on docker-config-engine-buster.
Co-authored-by: Xianghong Gu <xgu@centecnetworks.com>
Why I did it
Config db schema generated by minigraph can’t pass yang validation, and there's no 'alias' field in yang model.
Minigraph parser supports 'alias' field for VLAN.
How I did it
Add 'alias' field to sonic-vlan.yang
How to verify it
Build sonic-yang-models.
Run command 'sonic-cfggen -m xxx.xml --print-data', and run yang validation.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Recently additional sensors that were needed only for specific system added to all systems and caused errors.
How I did it
* Include CPU board and switch board sensors only on SN2201 system
* Fix issue in test_chassis_thermal, now it skips non existing thermals.
How to verify it
Run show platform temperature
Signed-off-by: liora <liora@nvidia.com>
Why I did it
Config db schema generated by minigraph can’t pass yang validation, there's no Vlan31 in 'VLAN' table.
How I did it
Update test minigraph to add vlan interface.
How to verify it
Build sonic-yang-models.
Run command 'sonic-cfggen -m tests/fg-ecmp-sample-minigraph.xml -p tests/mellanox-sample-port-config.ini --print-data', and run yang validation.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Reboot cause is not working in S52xx platforms.
How I did it
Modified platform API's.
How to verify it
Check "show reboot-cause" to verify the reboot reason
#### Why I did it
Fixes https://github.com/Azure/sonic-utilities/issues/1871
From [generic-config-updater](https://github.com/Azure/sonic-utilities/tree/master/generic_config_updater) we call `sonic-yang-mgmt` multiple times in order to check a certain change to ConfigDb is valid or not. It is expected for some changes to be invalid, so always printing errors from `sonic-yang-mgmt` makes the output hard to read.
In this PR, we are adding a way to control if logs should be printed or not.
#### How I did it
- Added `print_log_enabled` flag to sonic_yang ctor
- Converted all `print` statements to `sysLog(..., doPrint=True)`
#### How to verify it
unit-test passing means the change did not break logs.
#### Info about libyang logging
libyang provides an extensive logging logic which can support a lot of scenarios:
- ly_log_level: setting logging level
- LY_LLERR
- LY_LLWRN
- ...
- ly_set_log_clb: setting log callback to customize the default behavior which is printing the msgs
- ly_log_options: setting logging options
- LY_LOLOG: If callback is set use it, otherwise just print. If flag is not set, do nothing.
- ...
For more info refer to:
- https://netopeer.liberouter.org/doc/libyang/devel/html/group__logopts.html#gaff80501597ed76344a679be2b90a1d0a
- https://netopeer.liberouter.org/doc/libyang/devel/html/group__log.html#gac88b78694dfe9efe0450a69603f7eceb
#### What's next?
Consume the new flag `print_log_enabled` in [generic-config-updater](https://github.com/Azure/sonic-utilities/tree/master/generic_config_updater) to reduce the logging clutter.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
#### A picture of a cute animal (not mandatory but encouraged)
Why I did it
To incorporate the below changes in DellEMC S6100, S6000 platforms.
S6100, S6000:
Implement 'get_revision' method for Chassis
Implement 'get_maximum_consumed_power' method for FanDrawer
Implement 'get_revision', 'get_maximum_supplied_power' methods for PSU
Implement 'get_error_description' method for SFP.
S6100:
Implement 'get_module_index' method for Chassis
Implement 'get_description', 'get_maximum_consumed_power', 'get_oper_status', 'get_slot' methods for Module
Update component names in platform.json
How I did it
Implement the platform API methods in the respective device files
How to verify it
Verified that the respective sonic-mgmt platform API test cases report success.
Why I did it
To include newer Fan LED, thermal capabilities fields in platform.json of DellEMC S6000, S6100, Z9332f platforms.
How I did it
Add the capabilities fields in each platform's respective platform.json.
How to verify it
Ran sonic-mgmt platform api test cases that use capabilities fields and verified that the results are as expected.
Why I did it
Some platforms need to run few steps before the PDDF service is actually started.
* Adding pre_pddf_init script in the service file
* Raising exception for get_target_speed() for PSU-fan in PDDF (#8129)
- Why I did it
PDDF utils were python2 compliant and they needed to be migrated to Python3 (as per Bullseye)
PDDF common platform APIs file name changed as the name was already in use
Indentation issues
Dead/redundant code needed to be removed
- How I did it
Made files Python3 compliant
Indentation corrected
Redundant code removed
- How to verify it
AS7326 Accton platform uses PDDF. PDDF utils were run on this platform to verify.
- Why I did it
There were compilation errors and warnings like,
/usr/src/linux-headers-5.10.0-8-2-common/scripts/Makefile.build:69: You cannot use subdir-y/m to visit a module Makefile. Use obj-y/m instead.
fatal error: linux/platform_data/pca954x.h: No such file or directory
hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
If PDDF kernel module compilation fails, the PDDF debian package was not detecting the break.
- How I did it
Modified the code with new kernel 5.10 APIs.
Modified the Makefiles to use 'obj-m' instead of 'subdir-y'
- How to verify it
PDDF is supported on Accton platform. Load the build on AS7326 setup and check the 'dmesg'
Updating ztp submodule to include the below commits
f7dd3c5 [sonic-ztp]Fixing build failure after bullseye integration (#30)
9218e16 Replace swsssdk.ConfigDBConnector and SonicV2Connector with swsscommon(#28)
Signed-off-by: Sudharsan Dhamal Gopalarathnam <sudharsand@nvidia.com>
- Why I did it
Added missing functionality for dynamic buffer calculation in Spectrum-4.
- How I did it
Added a section of code in asic_table.j2 for Spectrum-4, and added the simx version of SN5600 to the supported list.
- How to verify it
Manually: buffershow -l should show all ingress/egress lossy/lossless pools, and all fields of profiles should show values.
Automatically: https://github.com/Azure/sonic-mgmt/blob/master/tests/qos/test_buffer.py
Signed-off-by: Raphael Tryster <raphaelt@nvidia.com>
691c37b7 [Route bulk] Fix bugs in case a SET operation follows a DEL operation in the same bulk (Azure/sonic-swss#2086)
a4c80c3d patch for issue Azure/sonic-swss#1971 - enable Rx Drop handling for cisco-8000 (Azure/sonic-swss#2041)
71751d10 [macsec] Support setting IPG by gearbox_config.json (Azure/sonic-swss#2051)
5d5c1692 [bulk mode] Fix bulk conflict when in case there are both remove and set operations (Azure/sonic-swss#2071)
8bbdbd2b Fix SRV6 NHOP CRM object type (Azure/sonic-swss#2072)
ef5b35f3 [vstest] VS test failure fix after fabric port orch PR merge (Azure/sonic-swss#1811)
89ea5385 Supply the missing ingress/egress port profile list in document (Azure/sonic-swss#2064)
81234373 [pfc_detect] fix RedisReply errors (Azure/sonic-swss#2040)
b38f527a [swss][CRM][MPLS] MPLS CRM Nexthop - switch back to using SAI OBJECT rather than SWITCH OBJECT
ae061e55 create debug_shell_enable config to enable debug shell (Azure/sonic-swss#2060)
45e446d9 [cbf] Fix max FC value (Azure/sonic-swss#2049)
b1b5b297 Initial p4orch pytest code. (Azure/sonic-swss#2054)
d352d5a9 Update default route status to state DB (Azure/sonic-swss#2009)
24a64d65 Orchagent: Integrate P4Orch (Azure/sonic-swss#2029)
15a3b6ca Delete the IPv6 link-local Neighbor when ipv6 link-local mode is disabled (Azure/sonic-swss#1897)
ed783e1f [orchagent] Add trap flow counter support (Azure/sonic-swss#1951)
e9b05a31 [vnetorch] ECMP for vnet tunnel routes with endpoint health monitor (Azure/sonic-swss#1955)
bcb7d61a P4Orch: inital add of source (Azure/sonic-swss#1997)
f6f6f867 [mclaglink] fix acl out ports (Azure/sonic-swss#2026)
fd887bf8 [Reclaim buffer] Reclaim unused buffer for dynamic buffer model (Azure/sonic-swss#1910)
92589789 [orchagent, cfgmgr] Add response publisher and state recording (Azure/sonic-swss#1992)
3d862a72 Fixing subport vs test script for subport under VNET (Azure/sonic-swss#2048)
fb0a5fd8 Don't handle buffer pool watermark during warm reboot reconciling (Azure/sonic-swss#1987)
16d4bcdb Routed subinterface enhancements (Azure/sonic-swss#1907)
9639db78 [vstest/subintf] Add vs test to validate sub interface ingress to a vnet (Azure/sonic-swss#1642)
Signed-off-by: Stephen Sun stephens@nvidia.com
- Why I did it
The feature state can be a jinja template, like in this file - https://github.com/Azure/sonic-buildimage/blob/master/files/build_templates/init_cfg.json.j2#L39.
Without this change it is not possible to validate a configuration file.
- How I did it
Relaxes the constraint on feature state. Feature state leaf can be any string.
- How to verify it
Run UT.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Why I did it
'SYSLOG_SERVER': {'': {}, '10.0.10.5': {}, '10.0.10.6': {}},
Config db schema generated by minigraph can’t pass yang validation, server address can't be empty.
How I did it
Update test minigraph to remove wrong configuration.
How to verify it
Build sonic-config-engine.
Run command 'sonic-cfggen -m xxx.xml --print-data', and SYSLOG_SERVERS table.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Config db schema generated from test minigraph can't pass yang validation.
How I did it
Update test minigraph to fix interface
How to verify it
Build sonic-config-engine.
Run command 'sonic-cfggen -m xxx.xml --print-data', and check interface table and port table.
Signed-off-by: Gang Lv ganglv@microsoft.com
