Updated asic_port_names for all Arista LC SKUs to follow latest naming
conventions to remove redundant ASICx suffix. For
Arista-7800R3-48CQ2-C48, added the asic_port_name mapping.
Co-authored-by: kenneth-arista <93353051+kenneth-arista@users.noreply.github.com>
Why I did it
[Build] Support to use the snapshot mirror for debian base image
How I did it
If the MIRROR_SNAPSHOT=n, then use the default mirror http://deb.debian.org/debian
If the MIRROR_SNAPSHOT=y, then use the snapshot mirror, for instance http://packages.trafficmanager.net/snapshot/debian/20230330T000330Z/.
How to verify it
+ scripts/build_debian_base_system.sh amd64 bullseye ./fsroot-vs
I: Target architecture can be executed
I: Retrieving InRelease
I: Checking Release signature
I: Valid Release signature (key id A4285295FC7B1A81600062A9605C66F00D6C9793)
I: Retrieving Packages
I: Validating Packages
I: Resolving dependencies of required packages...
I: Resolving dependencies of base packages...
I: Checking component main on http://packages.trafficmanager.net/snapshot/debian/20230331T000125Z...
I: Retrieving libacl1 2.2.53-10
Co-authored-by: xumia <59720581+xumia@users.noreply.github.com>
Why I did it
Change static route expiry timer max timeout value from 1800 to 172800.
To keep same value range as defined in sonic-restapi/sonic_api.yaml
How I did it
How to verify it
apply change to bgpcfd, restart bgp container see if the value take action.
#### Why I did it
When removing port from LAG while traffic is running thorough LAG there is traffic disruption of 60 seconds.
Fix issue https://github.com/sonic-net/sonic-buildimage/issues/14381
#### How I did it
The patch I added introduces "port_removing" op and call it right before Kernel is asked to remove the port.
Implement the op in LACP runner to disable the port which leads to proper LACPDU send.
#### How to verify it
Set LAG between 2 switches.
Set LAGs to be router port and set ip address.
In switch A send ping to ip address of LAG in switch B.
In switch B, while ping is running remove port from LAG.
Verify ping is not stopping.
catch system error and log as warning level instead of
error level in case interface was already deleted
Signed-off-by: Gokulnath-Raja <Gokulnath_R@dell.com>
src/sonic-platform-common
* 24009de - (HEAD -> 202205, origin/202205) Fix issue: should always check return value of a function if the function may return None (#350) (#356) (3 hours ago) [Junchao-Mellanox]
Why I did it
Fixes#14179
chassis-packet: missing arp entries for static routes causing high orchagent cpu usage
It is observed that some sonic-mgmt test case calls sonic-clear arp, which clears the static arp entries as well. Orchagent or arp_update process does not try to resolve the missing arp entries after clear.
How I did it
arp_update should resolve the missing arp/ndp static route
entries. Added code to check for missing entries and try ping if any
found to resolve it.
How to verify it
After boot or config reload, check ipv4 and ipv4 neigh entries to make sure all static route entries are present
manual validation:
Use sonic-clear arp and sonic-clear ndp to clear all neighbor entries
run arp_update
Check for neigh entries. All entries should be present.
Testing on T0 setup route/for test_static_route.py
The test set the STATIC_ROUTE entry in conifg db without ifname:
sonic-db-cli CONFIG_DB hmset 'STATIC_ROUTE|2.2.2.0/24' nexthop 192.168.0.18,192.168.0.25,192.168.0.23
"STATIC_ROUTE": {
"2.2.2.0/24": {
"nexthop": "192.168.0.18,192.168.0.25,192.168.0.23"
}
},
Validate that the arp_update gets the proper ARP_UPDATE_VARDS using arp_update_vars.j2 template from config db and does not crash:
{ "switch_type": "", "interface": "", "pc_interface" : "PortChannel101 PortChannel102 PortChannel103 PortChannel104 ", "vlan_sub_interface": "", "vlan" : "Vlan1000", "static_route_nexthops": "192.168.0.18 192.168.0.25 192.168.0.23 ", "static_route_ifnames": "" }
validate route/test_static_route.py testcase pass.
Why I did it
Optimize the version control for Debian packages.
Fix sonic-slave-buster/sources.list.amd64 not found display issue, need to generate the file before running the shell command to evaluate the sonic image tag.
When using the snapshot mirror, it is not necessary to update the version file based on the base image. It will reduce the version dependency issue, when an image is not run when freezing the version.
How I did it
Not to update the version file when snapshot mirror enabled.
How to verify it
Why I did it
Support to add SONiC OS Version in device info.
It will be used to display the version info in the SONiC command "show version". The version is used to do the FIPS certification. We do not do the FIPS certification on a specific release, but on the SONiC OS Version.
SONiC Software Version: SONiC.master-13812.218661-7d94c0c28
SONiC OS Version: 11
Distribution: Debian 11.6
Kernel: 5.10.0-18-2-amd64
How I did it
Why I did it
Add support for SFP refactor on Nokia-7215 Marvell armhf platform.
Platform: armhf-nokia_ixs7215_52x-r0
HwSKU: Nokia-7215
ASIC: marvell
Port Config: 48x1G + 4x10G (SFP+)
How I did it
Modify sfp.py to support SFP refactor optoe driver and platform.json to facilitate proper OC test completion.
How to verify it
Build armhf target for Nokia-7215 and verify proper Xcvrd and SFP refactor operation.
To include the following DNX changes:
Revert patch and add official SDK/SAI fix for the below CSPs
a. CS00012282080 : syncd crashes after a speed change due to "cosq src vsqs gport get" failure
b. CS00012281200 : J2C+ : Scope of config.bcm SOC property bcm_stat_interval
Fixes for:
a. CS00012278343: SONiC J2c+ Macsec: Shutting down LAG members which have macsec cause
remaining active LAG members to go down
b. CS00012279717: Instance_id printed in SAI syslog messages are truncated to 9 bytes
Why I did it
Release Notes for Cisco 8808 platform:
Thermal sensor driver support
Release Notes for Cisco 8101-32FH-O:
Support for unwanted Alarm Suppression
How I did it
Update platform version to 202205.2.2.1 (v0.15)
How to verify it
#### Why I did it
Update sonic-swss-common submodule pointer to include the following:
* 55fd28a [202205] Non recursive automake and Debian packaging changes (sonic-net/sonic-swss-common#772)
Why I did it
SONiC currently does not identify 'EdgeZoneAggregator' neighbor. As a result, the buffer profile attached to those interfaces uses the default cable length which could cause ingress packet drops due to insufficient headroom. Hence, there is a need to update the buffer templates to identify such neighbors and assign the same cable length as used by the T1.
How I did it
Modified the buffer template to identify EdgeZoneAggregator as a neighbor device type and assign it the same cable length as a T1/leaf router.
How to verify it
Unit tests pass, and manually checked on a 7260 to see the changes take effect.
Why I did it
Fixed syncd syslog errors reported in issue sonic-net/SONiC#1248Fixessonic-net/SONiC#1248
How I did it
Compile and load the SAI debian in SONiC 202205 image.
How to verify it
Verify PTF autorestart testcase passes.
Signed-off-by: rajkumar38 <rpennadamram@marvell.com>
Improve sudo cat command for RO user.
#### Why I did it
RO user can use sudo command show none syslog files.
#### How I did it
Improve sudo cat command for RO user.
#### How to verify it
Pass all UT.
Manually check fixed code work correctly.
#### Description for the changelog
Improve sudo cat command for RO user.
Why I did it
This PR is to update the check of IP_TYPE from sonic-acl.yang.
It's because if the ACL rule is added by loading a json file with acl-loader, there is no IP_TYPE for ACL rule. If such rule exists in ACL_RULE table, the GCU (generic config updater) refuses to update any ACL rules because the existing one is invalid.
This PR updates the yang model for ACL. If the IP_TYPE leaf doesn't exist, then we don't check the field.
How I did it
Accept the rule if IP_TYPE is absent.
How to verify it
The change is verified by UT.
Why I did it
We found a bug when pilot, the tag function doesn't remove the ACR domain when do tag, it makes the latest tag not work. And in the original tag function, it calls os.system and os.popen which are not recommend, need to refactor.
How I did it
Do a split("/") when get image_rep to fix the acr domain bug
Refactor the tag function code and add test cases
How to verify it
Check whether container images are tagged as latest when in kube mode.
arp_update should resolve the missing arp/ndp static route
entries. Added code to check for missing entries and try ping to
resolve the missing entry.
Why I did it
Fixes#14179
chassis-packet: missing arp entries for static routes causing high orchagent cpu usage
It is observed that some sonic-mgmt test case calls sonic-clear arp, which clears the static arp entries as well. Orchagent or arp_update process does not try to resolve the missing arp entries after clear.
How I did it
arp_update should resolve the missing arp/ndp static route
entries. Added code to check for missing entries and try ping if any
found to resolve it.
How to verify it
After boot or config reload, check ipv4 and ipv4 neigh entries to make sure all static route entries are present
manual validation:
Use sonic-clear arp and sonic-clear ndp to clear all neighbor entries
run arp_update
Check for neigh entries. All entries should be present.
Signed-off-by: anamehra <anamehra@cisco.com>
Why I did it
sonic-sfp based sfp impl would be deprecated in future, change to sfp-refactor based implementation.
How I did it
Use the new sfp-refactor based sfp implementation for seastone.
How to verify it
Manual test sfp platform api or run sfp platform test cases.
