src/sonic-utilities
* cd08aa69 - (HEAD -> 202205, origin/202205) [show][muxcable] add some new commands health, reset-cause, queue_info support for muxcable (#2853) (2 days ago) [vdahiya12]
* 4b96bd7e - Update pcieutil error message on loading common pcie module (#2786) (6 days ago) [cytsao1]
* 77b725ca - Fix the show interface counters throwing exception on device with no external interfaces (#2851) (6 days ago) [abdosi]
Why I did it
Don't auto update package version for release branch.
Work item tracking
Microsoft ADO (number only): 22335854
How I did it
How to verify it
Why I did it
Update cable length for uplink/downlink ports for chassis and and update PG/pool headroom size accordingly.
Work item tracking
17880812
How I did it
Updated cable length as well as buffer config in HWSKU files.
* [Arista] Fix boot0 code for docker_inram
Enable docker_inram for all systems with 4GB or less of flash.
This is mandatory to allow these systems to store 2 SONiC images.
This change also fixes the missing docker_inram attribute when
installing a new image from SONiC.
Because the SWI image can ship with additional kernel parameters within
such as `sonic_fips=` this lead to a conflict.
To prevent the conflict, the extra kernel parameters from the SWI are
now stored in the file `kernel-cmdline-append` which isn't used anywhere.
* Add optional zram compression for docker_inram
Some devices running SONiC have a small storage device (2G and 4G mainly)
The SONiC image growth over time has made it impossible to install
2 images on a single device.
Some mitigations have been implemented in the past for some devices but
there is a need to do more.
One such mitigation is `docker_inram` which creates a `tmpfs` and
extracts `dockerfs.tar.gz` in it.
This all happens in the SONiC initramfs and by ensuring the installation
process does not extract `dockerfs.tar.gz` on the flash but keep the file as is.
This mitigation does a tradeoff by using more RAM to reduce the disk footprint.
It however creates new issues for devices with 4G of system memory since
the extracted `dockerfs.tar.gz` nears the 1.6G.
Considering debian upgrades (with dual base images) and the continuous
stream of features this is only going to get bigger.
This change introduces an alternative to the `tmpfs` by allowing a system
to extract the `dockerfs.tar.gz` inside a `zram` device thus bringing
compression in play at the detriment of performance.
Introduce 2 new optional kernel parameters to be consumed by SONiC initramfs.
- `docker_inram_size` which represent the max physical size of the
`zram` or `tmpfs` volume (defaults to DOCKER_RAMFS_SIZE)
- `docker_inram_algo` which is the method to use to extract the
`dockerfs.tar.gz` (defaults to `tmpfs`)
other values are considered to be compression algorithm for `zram`
(e.g `zstd`, `zlo-rle`, `lz4`)
Refactored the logic to mount the docker fs in the SONiC initramfs under
the `union-mount` script.
Moved the code into a function to make it cleaner and separated the
inram volume creation and docker extraction.
On Arista platform with a flash smaller or equal to 4GB set
`docker_inram_algo` to `zstd` which produces the best compression ratio
at the detriment of a slower write performance and a similar read
performance to other `zram` compression algorithms.
Why I did it
To improve readability of config.bcm, fixed the alignment of soc properties
How to verify it
Build sonic_config_engine-1.0-py3-none-any.whl successfully
Signed-off-by: Neetha John <nejo@microsoft.com>
Why I did it
For security and consistency consideration, change the docker image from alpine to Debian in Makefile
Work item tracking
Microsoft ADO (number only): 23077660
How I did it
change the docker image from alpine to Debian in Makefile
Why I did it
Update soc properties for certain roles that need to use pfcwd dlr init based recovery mechanism
How to verify it
Updated the templates on a 7050cx3 dual tor and 7260 T1 which satisfies these conditions and validated pfcwd recovery which uses DLR_INIT based mechanism. Also validated that this mechanism is not used on 7050cx3 single tor with the updated templates
Signed-off-by: Neetha John <nejo@microsoft.com>
Why I did it
Our k8s feature will pull new version container images for each upgrade, the container images inside sonic will be more and more, but for now we don’t have a way to clean up the old version container images, the disk may be filled up. Need to add cleaning up the old version container images logic.
Work item tracking
Microsoft ADO (number only):
17979809
How I did it
Remove the old version container images besides the feature's current version and last version image, last version image is saved for supporting fallback.
How to verify it
Check whether the old version images are removed
Co-authored-by: lixiaoyuner <35456895+lixiaoyuner@users.noreply.github.com>
Why I did it
Introduce a new valid neighbor element type to YANG.
Work item tracking
Microsoft ADO (number only): 23994521
How I did it
Add MgmtLeafRouter to element network type list.
How to verify it
Passes UTs
Co-authored-by: Jing Kan <jika@microsoft.com>
This is backport of #14757
SONiC Yang model support for IPv6 link local
What I did
Created SONiC Yang model for IPv6 link local
How I did it
Defined Yang models for IPv6 link local based on https://github.com/sonic-net/SONiC/blob/master/doc/ipv6/ipv6_link_local.md
How to verify it
Added enable test case.
Signed-off-by: Akhilesh Samineni <akhilesh.samineni@broadcom.com>
Why I did it
We need to store information of power shelf in config_db for SONiC MX switch. Current minigraph parser cannot parse rack_mgmt_map field.
Work item tracking
Microsoft ADO (number only): 22179645
How I did it
Add support for parsing rack_mgmt_map.
Why I did it
Fix pipeline issue which breaks 202205 official build.
Work item tracking
Microsoft ADO (number only): 23115245
How I did it
qemuOrCrossBuild was not cherry picked into 202205 branch.
Remove this feature.
src/sonic-platform-common
* ff72811 - (HEAD -> 202205, origin/202205) Fix issue '<' not supported between instances of 'NoneType' and 'int' (#371) (5 hours ago) [Junchao-Mellanox]
* f2a419d - Render Media lane and Media assignment options info from Application Code (#368) (8 hours ago) [rajann]
* d8bad10 - Retrieve FW version using CDB command for CMIS transceivers + handle single bank FW versioning (#372) (8 hours ago) [mihirpat1]
Why I did it
This PR is to backport PR #11117 into 202205 branch.
This PR is to define Yang model for SYSTEM_DEFAULTS table.
The table was introduced in PR sonic-net/SONiC#982
The table will be like
"SYSTEM_DEFAULTS": {
"tunnel_qos_remap": {
"status": "enabled"
}
}
Work item tracking
Microsoft ADO (https://msazure.visualstudio.com/One/_workitems/edit/23037078)
How I did it
Add a new yang file sonic-system-defaults. Yang.
How to verify it
Verified by UT
What I did:
In FRR command update source <interface-name> is not at address-family level. Because of this
internal peer route-map for ipv6 were getting applied to ipv4 address family. As a result
TSA over iBGP for Ipv6 was not getting applied.
How I verify:
Manual Verification of TSA over both ipv4 and ipv6 after fix works fine.
Updated UT for this.
Added sonic-mgmt test gap: sonic-net/sonic-mgmt#8170
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
Why I did it
systemd stop event on service with timers can sometime delete the state_db entry for the corresponding service.
Note: This won't be observed on the latest master label since the dependency on timer was removed with the recent config reload enhancement. However, it is better to have the fix since there might be some systemd services added to system health daemon in the future which may contain timers
root@qa-eth-vt01-4-3700c:/home/admin# systemctl stop snmp
root@qa-eth-vt01-4-3700c:/home/admin# show system-health sysready-status
System is not ready - one or more services are not up
Service-Name Service-Status App-Ready-Status Down-Reason
---------------------- ---------------- ------------------ -------------
<Truncated>
ssh OK OK -
swss OK OK -
syncd OK OK -
sysstat OK OK -
teamd OK OK -
telemetry OK OK -
what-just-happened OK OK -
ztp OK OK -
<Truncated>
Expected
Should see a Down entry for SNMP instead of the entry being deleted from the STATE_DB
root@qa-eth-vt01-4-3700c:/home/admin# show system-health sysready-status
System is not ready - one or more services are not up
Service-Name Service-Status App-Ready-Status Down-Reason
---------------------- ---------------- ------------------ -------------
<Truncated>
snmp Down Down Inactive
ssh OK OK -
swss OK OK -
syncd OK OK -
sysstat OK OK -
teamd OK OK -
telemetry OK OK -
what-just-happened OK OK -
ztp OK OK -
<Truncated>
How I did it
Happens because the timer is usually a PartOf service and thus a stop on service is propagated to timer. Fixed the logic to handle this
Apr 18 02:06:47.711252 r-lionfish-16 DEBUG healthd: Main process- received event:snmp.service from source:sysbus time:2023-04-17 23:06:47
Apr 18 02:06:47.711347 r-lionfish-16 INFO healthd: check_unit_status for [ snmp.service ]
Apr 18 02:06:47.722363 r-lionfish-16 INFO healthd: snmp.service service state changed to [inactive/dead]
Apr 18 02:06:47.723230 r-lionfish-16 DEBUG healthd: Main process- received event:snmp.timer from source:sysbus time:2023-04-17 23:06:47
Apr 18 02:06:47.723328 r-lionfish-16 INFO healthd: check_unit_status for [ snmp.timer ]
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
This PR is to add the following
Add a new options "--profile" to the show macsec command, to show all profiles in device
Update the currentl show macsec command, to show profile in each interface o/p. This will tell which macsec profile the interface is attached to.
Why I did it
ptf_nn_agent failed to start in dnx rpc syncd because module afpacket was not installed.
Please see issue sonic-net/sonic-mgmt#7822
How I did it
Add downloading ptf afpacket module in docker file.
How to verify it
Verified that ptf_nn_agent was started successfully in dnx rpc syncd with the change.
- Why I did it
There are chassis-packet and Single asic platforms which support this 400G to 100G/40G speed change via config.
Enabling this feature for all platforms which can support this. Keeping it enabled for all does not affect the platforms
which do not support this feature yet.
Work item tracking
Microsoft ADO (number only):
17952356
- How I did it
Removed switch_type and role type check.
- How to verify it
Loaded router with default 400G config. Loaded minigraph to convert 400G to 100G speed.
Signed-off-by: anamehra <anamehra@cisco.com>
[S6100] Improve S6100 serial-getty monitor, wait and re-check when getty not running to avoid false alert.
#### Why I did it
On S6100, the serial-getty service some time can't auto-restart by systemd. So there is a monit unit to check serial-getty service status and restart it.
However, this monit will report false alert, because in most case when serial-getty not running, systemd can restart it successfully.
To avoid the false alert, improve the monitor to wait and re-check.
Steps to reproduce this issue:
1. User login to device via console, and keep the connection.
2. User login to device via SSH, check the serial-getty@ttyS1.service service, it's running.
3. Run 'monit reload' from SSH connection.
4. Check syslog 1 minutes later, there will be false alert: ' 'serial-getty' process is not running'
#### How I did it
Add check-getty.sh script to recheck again later when getty service not running.
And update monit unit to check serial-getty service status with this script to avoid false alert.
#### How to verify it
Pass all UT.
Manually check fixed code work correctly:
```
admin@***:~$ sudo systemctl stop serial-getty@ttyS1.service
admin@***:~$ sudo /usr/local/bin/check-getty.sh
admin@***:~$ echo $?
1
admin@***:~$ sudo systemctl status serial-getty@ttyS1.service
● serial-getty@ttyS1.service - Serial Getty on ttyS1
Loaded: loaded (/lib/systemd/system/serial-getty@.service; enabled-runtime; vendor preset: enabled)
Active: inactive (dead) since Tue 2023-03-28 07:15:21 UTC; 1min 13s ago
admin@***:~$ sudo /usr/local/bin/check-getty.sh
admin@***:~$ echo $?
0
admin@***:~$ sudo systemctl status serial-getty@ttyS1.service
● serial-getty@ttyS1.service - Serial Getty on ttyS1
Loaded: loaded (/lib/systemd/system/serial-getty@.service; enabled-runtime; vendor preset: enabled)
```
syslog:
```
Mar 28 07:10:37.597458 *** INFO systemd[1]: serial-getty@ttyS1.service: Succeeded.
Mar 28 07:12:43.010550 *** ERR monit[593]: 'serial-getty' status failed (1) -- no output
Mar 28 07:12:43.010744 *** INFO monit[593]: 'serial-getty' trying to restart
Mar 28 07:12:43.010846 *** INFO monit[593]: 'serial-getty' stop: '/bin/systemctl stop serial-getty@ttyS1.service'
Mar 28 07:12:43.132172 *** INFO monit[593]: 'serial-getty' start: '/bin/systemctl start serial-getty@ttyS1.service'
Mar 28 07:13:43.286276 *** INFO monit[593]: 'serial-getty' status succeeded (0) -- no output
```
#### Description for the changelog
[S6100] Improve S6100 serial-getty monitor.
#### Ensure to add label/tag for the feature raised. example - PR#2174 under sonic-utilities repo. where, Generic Config and Update feature has been labelled as GCU.
