Commit Graph

271 Commits

Author SHA1 Message Date
Joe LeVeque
f047756d7b [image config] Install Python tabulate library v0.8.2 via pip (#2130) 2018-10-08 18:36:37 -07:00
Kevin(Shengkai) Wang
ea4b4bd650 [mellanox]: Update recipe for hw-mgmt according to latest changes (#2128)
Update the hw-mgmt to latest release V.2.0.0060.
Update the related files according to the latest hw-mgmt.

Signed-off-by: Kevin Wang <kevinw@mellanox.com>
2018-10-08 18:33:44 -07:00
Samuel Angebault
6ba2f97f1e [devices]: Align flash partition at 1M (#2104)
Flashes used for the 7050QX-32 and 7050QX-32S have a fw issue.
The best option to solve the problem is to upgrade to a newer firmware.
However this can only be done while in memory and take 10 seconds.
Adding an upgrade mechanism is possible but would need more
consideration as flashing the firmware and reformating the flash will
exceed the fast-reboot requirements.

A quick mitigation is to align the ext4 partition that we create on
these vfat based system on a 4k boundary.
Here we chose 1M instead but it's the same.
Newer version of sfdisk do this automatically but the one in SONiC
today doesn't have this behavior.

This workaround will only reduce the pace of the flash health
degradation. The only long term fix is to flash the firmware.
2018-10-02 06:10:12 -07:00
Jipan Yang
dedd5624a0 Adapt to the new WARM_RESTART_TABLE table schema: change from restart… (#2083)
* Adapt to the new WARM_RESTART_TABLE table schema: change from restart_count to restore_count

Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>

* Update variable and function name to match restore_count name change

Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>

* Update swss submodule for warm restart schema change

Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
2018-10-02 06:08:26 -07:00
Ying Xie
c8e6b15504
[syncd] warn shutdown syncd process when warm boot is enabled (#2078)
* [syncd] warn shutdown syncd process when warm boot is enabled

Signed-off-by: Ying Xie <ying.xie@microsoft.com>

* [warmboot] mount folder to hold warmboot temporary files

Signed-off-by: Ying Xie <ying.xie@microsoft.com>

* Fix a typo
2018-10-01 19:01:04 -07:00
Samuel Angebault
e72d63cf92 [arista] Update Arista drivers submodule (#2097)
* [arista] Update Arista drivers submodule

* Fix 7050qx32 fancontrol for kernel 4.9

* Fix 7060cx32s fancontrol for kernel 4.9

* Install python3-yaml for sonic config tests

* Fix 7260cx3 fancontrol for kernel 4.9

* Fix hwsku-init scripts and permissions

* Preserve old_config folder in boot0
2018-09-28 21:27:41 -07:00
Ying Xie
cfe01f19e4
Separate syncd service from swss service (#2051)
* [swss.sh] refactor ssh service script code

- Move checks and waits to helper functions.
- Remove early returns from code stream

Signed-off-by: Ying Xie <ying.xie@microsoft.com>

* [swss.sh] Add debug log for service state changes

Signed-off-by: Ying Xie <ying.xie@microsoft.com>

* [syncd] Separate out syncd service from swss service

Still make them start/stop/restart synchronously so existing scripts
continue working.

Signed-off-by: Ying Xie <ying.xie@microsoft.com>

* Remove extra 'After' in swss service and remove syncd docker warm boot code

Syncd warm boot needs more thinking, we can put it back once the work
flow has been defined and ready for coding/testing.

* [syncd] syncd start/stop/restart shouldn't affect swss state

Semi-detach syncd service state change from swss:

- swss state change still chase syncd service to follow except warm boot
- syncd state change will only affect itself.

Signed-off-by: Ying Xie <ying.xie@microsoft.com>

* add missing '{'
2018-09-24 16:35:01 -07:00
Taoyu Li
018b5899be [updategraph] add support to use preset config instead of default minigraph (#2050)
* [updategraph] add support to use preset config instead of default minigraph

* Fix variable case

* Remove default minigraph case

* Remove default minigraphs and add default_sku files
2018-09-21 22:01:10 -07:00
Samuel Angebault
7ece396592 Add SWI_DEFAULT support in boot0 (#2056)
Currently setting the next boot image is the same as setting a default
image.
With this change SWI_DEFAULT= will be considered the default image and
SWI= the next image.
When executing the boot0 SWI= will be overriden by SWI_DEFAULT= if it
exists and create in with the value of SWI= otherwise.
2018-09-20 00:19:40 -07:00
Taoyu Li
47c9542c63 Don't reuse init_cfg.json from old image during upgrade (#2036) 2018-09-11 21:26:51 -07:00
Jipan Yang
3f37b96de6 [swss]: Add support for swss docker warm restart (#1982)
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
2018-08-25 01:39:09 -07:00
lguohan
83f0822dde
[build]: run docker info at later stage in the build (#1984)
wait till docker service started

Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-08-24 10:33:56 -07:00
lguohan
80c6453731
[swss]: simplify swss systemd service file (#1965)
move the swss service start/stop logic into /usr/local/bin/swss.sh

Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-08-22 13:02:32 -07:00
yurypm
de0e892eaa [arista] Fix arista-convertfs script (#1961) 2018-08-21 15:19:31 -07:00
Samuel Angebault
788b20ee12 [arista]: Fix mount point discovery in boot0 for overlayfs (#1959)
On overlay filesystem the name of the mountpoint will also match in the
mount command for overlayfs as upperdir=
To prevent detecting the wrong partition we now look for space before.
This ensure that we match mountpoint and not devices in df and mount
outputs.
2018-08-21 00:58:16 -07:00
Shuotian Cheng
9413fa9a7b
[interfaces]: Move IP/MTU information from interfaces file into database (#1908)
- Move front panel ports and port channels MTU and IP configurations out of
the current /etc/network/interfaces file and store them in the configuration
database.

- The default MTU value for both front panel ports and the port channels is
9100. They are set via the minigraph or 9100 by default.

- Introduce portmgrd which will pick up the MTU configurations from the
configuration database.

- The updated intfmgrd will pick up IP address changes from the configuration
database.

- Update sonic-swss submodule

Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
2018-08-20 11:19:16 -07:00
Joe LeVeque
98082d56a0 [baseimage]: Download picocom version 3.1-2 from stretch-backports; No longer build from source (#1946) 2018-08-17 17:38:20 -07:00
lguohan
38f3eba695
[kernel]: upgrade kernel to 4.9.0-7 (4.9.110-3+deb9u1) (#1922)
* [kernel]: upgrade kernel to 4.9.0-7 (4.9.110-3+deb9u1)

Signed-off-by: Guohan Lu <gulv@microsoft.com>

* [mellanox]: Update SDK pointer for 4.9.0-7 kernel (#44)

Signed-off-by: Volodymyr Samotiy <volodymyrs@mellanox.com>

* Update arista drivers for 4.9.0-7 linux kernel (#43)
2018-08-16 08:56:56 -07:00
cawand
9f545456c9 Added picocom and pexpect to base image, for use in consutil (#1935)
Signed-off-by: Cayla Wanderman-Milne <t-cawand@microsoft.com>
2018-08-15 21:41:12 -07:00
Volodymyr Samotiy
746ad967a4 [mellanox]: Fix post stop action in swss service template (#1928)
Signed-off-by: Volodymyr Samotiy <volodymyrs@mellanox.com>
2018-08-14 11:46:01 -07:00
lguohan
f3ca7c422f
[rsyslog]: use # to separate container name and program name in syslog message (#1918)
Previously use / to separate container name and program name.

However, in rsyslogd:

Precisely, the programname is terminated by either (whichever occurs first):

end of tag
nonprintable character
‘:’
‘[‘
‘/’
The above definition has been taken from the FreeBSD syslogd sources.

Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-08-12 22:23:58 -07:00
zhenggen-xu
d761630f73 Fix potential blackholing/looping traffic when link-local was used and refresh ipv6 neighbor to avoid CPU hit (#1904)
* Fix potential blackholing/looping traffic and refresh ipv6 neighbor to avoid CPU hit

In case ipv6 global addresses were configured on L3 interfaces and used for peering,
and routing protocol was using link-local addresses on the same interfaces as prefered nexthops,
the link-local addresses could be aged out after a while due to no activities towards the link-local
addresses themselves. And when we receive new routes with the link-local nexthops, SONiC won't insert
them to the HW, and thus cause looping or blackholing traffic.

Global ipv6 addresses on L3 interfaces between switches are refreshed by BGP keeplive and other messages.

On server facing side, traffic may hit fowarding plane only, and no refresh for the ipv6 neighbor entries regularly.
This could age-out the linux kernel ipv6 neighbor entries, and HW neighbor table entries could be removed,
and thus traffic going to those neighbors would hit CPU, and cause traffic drop and temperary CPU high load.

Also, if link-local addresses were not learned, we may not get them at all later.

It is intended to fix all above issues.

Changes:
Add ndisc6 package in swss docker and use it for ipv6 ndp ping to update the neighbors' state on Vlan interfaces
Change the default ipv6 neighbor reachable timer to 30mins
Add periodical ipv6 multicast ping to ff02::11 to get/refresh link-local neighbor info.

* Fix review comments:
Add PORTCHANNEL_INTERFACE interface for ipv6 multicast ping
format issue

* Combine regular L3 interface and portchannel interface for looping

* Add ndisc6 package to vs docker
2018-08-12 03:14:55 -07:00
Guohan Lu
7f7a2a019e [sshd]: regenerate ssh key if ssh_host_rsa_key is not present
ssh_host_key is removed in debian stretch. Use ssh_host_rsa_key
to decide if the host keys are present.

Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-08-11 21:38:33 +00:00
Volodymyr Samotiy
6a3c05f498 [mellanox]: Update recipe for hw-mgmt according to latest changes (#40)
Signed-off-by: Volodymyr Samotiy <volodymyrs@mellanox.com>
2018-08-11 09:09:03 +00:00
Guohan Lu
46b0847339 [baseimage]: use original stretch bash in the base image 2018-08-11 09:09:03 +00:00
paavaanan
ecfca8bf23 [devices]: DellEMC new platform support for z9264f - 64x100 (#26)
* Added new platform support DellEMC - Z92264f - 64x100

* Includes changes with Makefiles, sfputil, eeprom and default minigraph

* Led support for Z9264f platform

* Includes changes on default minigraph

* ipmitool implementation in pmon docker. platform_sensors script is inclued in pmon startup
2018-08-11 09:09:03 +00:00
Samuel Angebault
0f0e7ab7e8 Add support 4.9 support for 7260CX3 (#34) 2018-08-11 09:09:03 +00:00
Samuel Angebault
764a7edd83 [device]: Enable arista drivers for sonic-linux-kernel 4.9 (#21)
* Enable arista drivers

* Add vfat ascii charset in initramfs

* Update boot0.j2 for 4.9 kernel

* Fix i2c offsets in sensors.conf

* Bump sonic-platform-modules-arista submodule
2018-08-11 09:09:03 +00:00
lguohan
35ab7a6e09 [kernel]: upgrade linux kernel to 4.9.0-5 (4.9.65-3+deb9u2) (#8) 2018-08-11 09:09:03 +00:00
Guohan Lu
0827ed3b1a [baseimage]: install tacacs dependencies 2018-08-11 09:07:59 +00:00
Guohan Lu
540a87a9db [opennsl]: use opennsl kernel module based on kernel 4.9.0-3 2018-08-11 09:07:59 +00:00
Guohan Lu
8c72d8c6f2 [build]: insert overlay kmod for base image build 2018-08-11 09:07:59 +00:00
Guohan Lu
b03e974bb3 [baseimage]: let docker in base image use overlay fs instead of aufs 2018-08-11 09:07:59 +00:00
Guohan Lu
f64ffe8571 [baseimage]: build root filesystem via overlay fs instead of aufs 2018-08-11 09:07:59 +00:00
Guohan Lu
4d701ad037 [baseimage]: update base image from jessie to stretch 2018-08-11 09:07:59 +00:00
Joe LeVeque
7aefa185d4 Download newer version (8.23.0-2) of rsyslog from jessie-backports in hopes of eliminating memory leaks (#1912) 2018-08-09 23:56:41 -07:00
Taoyu Li
530e2dc4e1
Only keep most recent one in old_config (#1884) 2018-07-31 12:50:54 -07:00
Sagar Balani
5011622c6f [platform]: bfn intf: allow-hotplug for usb0 interface (#1889) 2018-07-30 09:54:05 -07:00
Rodny Molina
c3c8f7fd7f Fix for bash's memory-leak (#1879)
* Fix for bash's memory-leak

Memory leak is observed during the execution of scripts that make use of bash-arrays. In scenarios where the offending script is executed on a regular basis (e.g. fancontrol), the leaking process may end up consuming most of the system resources.

In this PR i'm replacing bash in all the contexts where it executes (both host and dockers). The official patch for this issue is here: https://ftp.gnu.org/gnu/bash/bash-4.3-patches/bash43-040

* Fixing minor issue during code-merge

Signed-off-by: Rodny Molina <rmolina@linkedin.com>
2018-07-27 17:46:33 -07:00
pavel-shirshov
10b4bbcae8 [swss]: Start counter from swss container (#1875)
* sonic-quagga update. Don't spam with 'Vtysh connected from' message

* Enable counters inside swss container. systemd is not flexible enough to follow our business rules
2018-07-26 13:39:08 -07:00
Qi Luo
e3abf0c070
[docker] Exit if docker run fails (#1870) 2018-07-24 21:46:55 -07:00
Sagar Balani
93905d3d82 [barefoot]: Support for platforms based on Barefoot Networks' device (#1796)
* Initial commit

* Add Ingrasys S9180-32X platform dirver.

Signed-off-by: Wade He <chihen.he@gmail.com>

* Add bfn.service for init barefoot.

Signed-off-by: Wade He <chihen.he@gmail.com>

* [Barefoot Beta] Add some functions and fixed some bugs.

1. Update sensors.conf.
2. Fixed IO expander init.
3. Fixed PSU EEPROM.
4. Fixed MB EEPROM.
5. Add fancontrol and fan init.
6. Add SYS LED control (sys, fan, fan tray).
7. 2.5V compute and setup max and min.
8. Fixed typo MB eeprom delete address.
9. Remove coretemp to BMC.
10. Add active CPLD.
11. Modify SFP+ GPIO slave address.
12. Modify tmp75 Near Port 32 slave address.

Signed-off-by: Wade He <chihen.he@gmail.com>

* Add bfn script in /etc/init.d/

Signed-off-by: Wade He <chihen.he@gmail.com>

* Add bfn service in debian

Signed-off-by: Wade He <chihen.he@gmail.com>

* Fixed CPLD switch LED behavior.

Signed-off-by: Wade He <chihen.he@gmail.com>

* [Barefoot Beta] Fixed sensors and hwmon order.
1. Fixed ignore sensors Vbat.
2. Reorg hwmon order.

Signed-off-by: Wade He <chihen.he@gmail.com>

* Fixed PSU1 and PSU2 EEPROM order.

Signed-off-by: Wade He <chihen.he@gmail.com>

* initial barefoot checkin october 2017

* update refpoint

* update refpoints

* update refpoints to bf-master

* update refpoint

* update refpoint to tested version

* change to platform from asic

* update refpoint for swss

* revert core creation setting

* update refpoints

* add telnet for debug shell

* update refpoints 11/17/17

* missed change in file on previous merge

* [CPLD] Fixed blink LED issue.

* Fixed blink LED mask set error.

Signed-off-by: Wade He <chihen.he@gmail.com>

* Update bf_kdrv.c for 6.0.2.39

* Update bf kernel driver

* Add bf_fun kernel module.

* Update bf_tun for fixed build error

* merge with Azure master (12/12/17)

* update swss refpoint

* update refpoint of swss

* library dependency for stack unroll

* update refpoint to bf-master

* [DHCP relay]: Fix circuit ID and remote ID bugs (#1248)

* [DHCP relay]: Fix circuit ID and remote ID bugs

* Set circuit_id_len after setting circuit_id_len to ip->name

* [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272)

* Add I2C CPLD kernel module for psuutil.
 * Support psuutil script.
 * Add voltage min and max threshold.
 * Update sensors.conf for tmp75.

Signed-off-by: Wade He <chihen.he@gmail.com>

* Allow multi platform support - infra (more changes to follow)

* update relative path to include platform for clarity

* [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274)

- What I did
Add switch ASIC vendor: Nephos
Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X

- How I did it
Add platform/nephos files
Add platform/nephos/sonic-platform-modules-ingrasys submodule
Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files
Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files
Add SONiC to support Nephos platform
Update Head of submodule src/sonic-sairedis to "3b817bb"

- How to verify it
To build SONiC installer image and docker images, run the following commands:

make configure PLATFORM=nephos
make target/sonic-nephos.bin
Check system and network feature is worked as well

- Description for the changelog
Add switch ASIC vendor and platforms for Nephos

- A picture of a cute animal (not mandatory but encouraged)

Signed-off-by: Sam Yang <yang.kaiyu@gmail.com>

* change source of files to github (from dropbox), update sairedis refpoint

* update refpoint of sairedis

* [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board   (#1269)

* [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287)

* update sairedis (fast-boot refpoint)

* fix syncd rpc make files

* update refpoint to handle Makefile change (no functional change)

* [Marvell]: Add support for SLM5401-54x device (#1307)

* Marvell's updates for SONiC.201712 & SAI v1.0
* [Platform] Add Marvell's SLM5401-54x for branch 201712

* [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321)

- update Arista 7050-QX32S config.bcm file
- update Accton th-as771*-32x100G.config.bcm files

* update refpoint for Makefile chnage in sairedis

* update refpoint - sairedis

* update sairedis to older refpoint till we debug clean build

* export asic platform for build

* update refpoint for makefiles

* [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332)

* Upload wnc-osw1800

* Modify for Barefoot suggest

* Revert bfn-platform.mk

* Update bfn-platform-wnc.mk

Update parameter name

* Update parameter name

* initial support for WNC platform

* change switch name to "switch"

* Delete bf modules for rel_7_0

* Add Ingrasys S9180 platform

Signed-off-by: Wade He <chihen.he@gmail.com>

* Modify bfnsdk for Ingrasys S9180 platform

Signed-off-by: Wade He <chihen.he@gmail.com>

* Resolved the conflict.

* Resolved the conflict.

* Update submodule path and url.

* Delete unused file.

* Update PSU GPIO and EEPROM for psuutil.

* Add psuutil in S9180-32X

Signed-off-by: Wade He <chihen.he@gmail.com>

* update refpoint

* update refpoint

* change contact email, update refpoint

* cleanup and update kernel modules

* updates based on review

* update refpoint

* update refpoint

* fix typo in config script to check for platforms

* remove stale file

* resolve conflicts

* cleanup diffs with Azure repo and update SDK debs

* update refpoints to Azure

* address review comments

* revert refpoint of swss-common

* porting the build fix from master

* porting build fix from master

* Minor Fix

* Minor fix

* Temp to sde deb packages url

* Update sonic - sairedis,swss & swss-common refpoints

* Update git modules url path to bfn repo

* updated paths for swss, swss-common & sairedis

* Update refpoint for sonic-swss to local bfn repo

* Update URL for downloading sde debian packages

* porting fix links of debian git server from master

* porting fix links of debian git server from master

* [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC

* Update ref points for swss, swss-common and sairedis repos

* Add sonic platform scripts for bfn montara/maverick

* Call sh scripts instead of calling py scripts

* Address upstream PR Comments (#10)

* Update bf-master with azure/master
* Undo changes to some files

* Revert "Address upstream PR Comments (#10)"

This reverts commit a7fddb83ca.

* Address upstream comments (#11)

* Remove all non bfn specific changes from upstream PR

* Revert "Address upstream comments (#11)"

This reverts commit 559132103e.

* Undo non bfn changes

* Little more cleanup

* Add back code removed in merge

* export CONFIGURED_PLATFORM

* Update sairedis and swss refpoints

* Address Upstream PR comment

* change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64

* Set default tx queue len for usb0 interface to 64

* Update sairedis refpoint

* Update swss ref point

* Add bfn buffer cfg files for montara/maverick as per new design

* Update buffer cfg templates for bfn montara

* add non zero size to buffer profile
* add macro to generate port lists

* Update buffer cfg templates for bfn mavericks

* add non zero size for buffer profiles
* add port generation macro

* Add missing psmisc package

* BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions.
Adding psmisc to resolve this issue.

* Update swss ref point

* Update swss ref point

* Update sairedis refpoint

* Update sairedis refpoint

* Update sairedis refpoint

* Update sairedis refpoint

* Update refpoint for sairedis and swss

* sairedis to azure master
* swss to latest bfn bf-master

* Update gitmodules

Update url for sairedis to azure master

* Correct typo in bfn platform script

* Update swss and sairedis ref points

* Update swss ref point

* Address Review comments

* Update swws path in gitmodules to azure master
* update swss refpoint
* update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR)

* Fix sairedis refpoint broken in by previous merge

* Remove psmisc from docker base image

* This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session.
Will fix this in a seperate PR. Need this for SONIC upstreaming

* Address upstream comments

* Remove bmc interface from interface jinja template and sample output interfaces file
* Add bmc interface at boot time to network interfaces for bfn bmc based platforms

* Remove autogen ingrasys debian files

* Revert "Remove autogen ingrasys debian files"

* Buffer and qos config template fix for bfn platforms (#21)

SWI-1509 Buffer and qos config template fix for bfn platforms

* Fix qos config files for montara & mavericks (#22)

* Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs

* Fix vs test (#23)
2018-07-24 10:23:12 -07:00
Andriy Moroz
dadc17d9e6 [Mellanox] Use MAC from EEPROM for PortChannels and VLAN Interfaces (#1793)
* Use MAC from EEPROM for PortChannels

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Use MAC from EEPROM in DEVICE_METADATA

Will affect MAC for VLAN interfaces

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Get MAC via decode-syseeprom

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* hw-management is now a service

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Add error handling for MAC fetch process

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>
2018-07-23 15:51:03 -07:00
pavel-shirshov
c52fb762dd
Convert arp_update into a 'start-it-once' mode (#1864)
* Run arp_update just once, don't restart it. It will run continuosly with 5 min pauses
2018-07-18 13:04:57 -07:00
Joe LeVeque
2ccfefc919
[caclmgrd] Add a rule to allow all connections from localhost (#1858) 2018-07-13 10:27:47 -07:00
pavel-shirshov
f598397b07 Pavelsh/restart swss counters (#1854)
* sonic-quagga update. Don't spam with 'Vtysh connected from' message

* Restart counters in 60 seconds after manual swss restart
2018-07-12 01:52:19 -07:00
Joe LeVeque
a8af2e57f0 [sonic_debian_extension.j2] Create /var/cache/sonic/ directory (#1845) 2018-07-06 02:50:42 -07:00
Samuel Angebault
26afa348ea [device] Misc fixes for Arista platforms (#1844)
* Update sensors.conf for 7050QX-32 and 7050QX-32S

These two platforms were using a previous version of a kernel driver.
The new one names the i2c buses differently.
We therefore need to rename them here.

* Fix the default minigraph for the 7050QX-32S

The interface offset is invalid which makes sonic-cfggen generate an
invalid config_db.jon in rc.local.
This config then silently makes orchagent/syncd fail.

* Use the partition on which sonic-aboot.swi is

Instead of always assuming /mnt/flash, use the partition where the image
to be installed lies.
This allow for the image to be on any partition.
2018-07-05 14:30:57 -07:00
byu343
73a2e64d9f [arista]: Add platform support for DCS-7170-64C (#1718) 2018-07-03 17:10:11 -07:00
Joe LeVeque
f04f0704f7
Build python-click Debian package from version 6.7-4 source to fix CLI autocomplete/suggest (#1824) 2018-06-29 09:59:46 -07:00