In Makefile.cache, for $(1)_DEP_PKGS_SHA, the intention is to include
the DEP_MOD_SHA and MOD_HASH of each of the current package's
dependencies. However, there's a level of dereferencing missing; instead
of grabbing the value of $(dfile)_DEP_MOD_SHA, it is literally using the
variable name $(dfile)_DEP_MOD_SHA. This means that the value of this
variable will not change when some dependency changes.
The impact of this is in transitive dependencies. For a specific
example, if there is some change in sairedis, then sairedis will be
rebuilt (because there's a change within that component), and swss will
be rebuilt (because it's a direct dependency), but
docker-swss-layer-buster will not get rebuilt, because only the direct
dependencies are effectively being checked, and those aren't changing.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
Fixes some pmon errors/warnings by providing missing configuration files
How I did it
Add missing pcie.yaml and sensors.conf for supported linecards
How to verify it
pcie-check should pass
sensors should display proper sensor names
* [PDDF] Rename temp for 7816/7326/7726
Signed-off-by: Jostar Yang <jostar_yang@accton.com.tw>
* Change naming to pddf device
Co-authored-by: Jostar Yang <jostar_yang@accton.com.tw>
Why I did it
The image size is too large, when there are multiple lazy packages and multiple platforms. It is not necessary to keep the lazy installation packages in multiple copies.
For cisco image, the image size will reduce from 3.5G to 1.7G.
How I did it
Use symbol links to only keep one package for each of the lazy package.
Make a new folder fsroot/platform/common
Copy the lazy packages into the folder.
When using a package in each of the platform, such as x86_64-grub, x86_64-8800_rp-r0, x86_64-8201_on-r0, etc, only make a symbol link to the package in the common folder.
Signed-off-by: Ze Gan <ganze718@gmail.com>
#### Why I did it
The SSCI is wrong in the output of MACsec so that the virtual SAI cannot parse the output corretly.
The wrong output:
```
142: macsec_eth1: protect on validate strict sc off sa off encrypt on send_sci on end_station off scb off replay off
cipher suite: GCM-AES-XPN-256, using ICV length 16
TXSC: 5254008f4f1c0001 on SA 0
0: PN 103, state on, key 12cbc4b64e26c9a1ba14d810da20d16e
SSCI 33554432, RXSC: 525400edac5b0001, state on
0: PN 107, state on, key 12cbc4b64e26c9a1ba14d810da20d16e
offload: off
```
Expected
```
142: macsec_eth1: protect on validate strict sc off sa off encrypt on send_sci on end_station off scb off replay off
cipher suite: GCM-AES-XPN-256, using ICV length 16
TXSC: 5254008f4f1c0001 on SA 0
0: PN 252, state on, SSCI 33554432, key 12cbc4b64e26c9a1ba14d810da20d16e
RXSC: 525400edac5b0001, state on
0: PN 264, state on, key 12cbc4b64e26c9a1ba14d810da20d16e
```
#### How I did it
Move SSCI before the key so that SSCI will not be the front of SC information.
#### Why I did it
To pick up new commits:
* 60d2467 Add depends to p4rt debian package
#### How I did it
update sonic-p4rt/sonic-pins submodule pointer
#### How to verify it
should be able to build with p4rt enabled.
#### Why I did it
This function is critical for is_multi_asic() and SonicDBConfig initializing. No explicit reading ConfigDB. Otherwise it will implicitly trigger SonicDBConfig initializing.
#### How I did it
1. No explicit reading ConfigDB in get_asic_conf_file_path()
2. Collect asic_conf_path_candidates lazily to prevent any unnecessary side effect and improve the performance
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
Why I did it
submodule update for the following commits
7a203b1 [chassis] Add new tables in counter db for Voq counter support. (#530)
5effea3 add new table schema for bgp profile (#608)
130dca5 [ci] Update azure pipeline branch variable reference.
708ed39 [ci] Parameterize pipeline and improve azure pipeline (#599)
9c08456 Added new P4RT tables. (#604)
Python 2 support for sonic-pcied was removed, and the Python 2 version
of the variable no longer exists.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Some places were not correctly setting the HTTPS proxy, and were only
setting the HTTP proxy. This was fine until Docker 20.10.10, which then
started using `https_proxy` for HTTPS connections.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
The PR is aimed to fix a bug that mgmt port eth0 may loss IP even if user configured static IP of eth0. This is not a always reproduceable issue, the reproducing flow is like:
Systemd starts networking service, which runs a dhcp based configuration and assigned an ip from dhcp.
Systemd starts interface-config service who depends on networking service
Interface-config service runs command “ifdown –force eth0”, check line. but networking service is still running so that this line failed with error: “error: Another instance of this program is already running.”. This error is printed by ifupdown2 lib who is the main process of networking service. So, ifdown actually does not work here, the ip of eth0 is not down.
Interface-config service updates /etc/networking/interface to static configuration.
Interface-config service runs command “systemctl restart networking”. This command kills the previous networking related processes (log: networking.service: Main process exited, code=killed, status=15/TERM), and try to reconfigure the ip address with static configuration. But it detects that the configured IP and the existing IP are the same, and it does not really configure the ip to kernel. Hence, the ip is still getting from dhcp. (this could be a bug of ifupdown2: previous ip is from dhcp, new ip is a static ip, it treats them as same instead of re-configuring the IP)
When the lease of the ip expires, the ip of eth0 is removed by kernel and the issue reproduces.
The issue is not always reproduceable because networking service usually runs fast so that it won't hit step#3.
How I did it
Check networking service state before running "ifdown –force eth0", wait for it done if it is activating.
How to verify it
Manual test.
#### Why I did it
Fix issue: Non compliant leaf list in config_db schema: https://github.com/Azure/sonic-buildimage/issues/9801
#### How I did it
The basic flow of DPB is like:
1. Transfer config db json value to YANG json value, name it “yangIn”
2. Validate “yangIn” by libyang
3. Generate a YANG json value to represent the target configuration, name it “yangTarget”
4. Do diff between “yangIn” and “yangTarget”
5. Apply the diff to CONFIG DB json and save it back to DB
The fix:
• For step #1, If value of a leaf-list field string type, transfer it to a list by splitting it with “,” the purpose here is to make step#2 happy. We also need to save <table_name>.<key>.<field_name> to a set named “leaf_list_with_string_value_set”.
• For step#5, loop “leaf_list_with_string_value_set” and change those fields back to a string.
#### How to verify it
1. Manual test
2. Changed sample config DB and unit test passed
Signed-off-by: Neetha John nejo@microsoft.com
Why I did it
Address build failures due to sonic config engine unit tests failing. Failures are due to referencing format used in Arista 7800 sample output for buffer template
How I did it
Remove referencing format
How to verify it
Sonic config engine wheel should be built successfully
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan arlakshm@microsoft.com
Why I did it
Fixes#10158
How I did it
Add yang model for config_db table BGP_VOQ_CHASSIS_NEIGHBOR and UT
closes#10157
Why I did it
Add yang model for the bgp_internal_neighbor table in config_db
How I did it
Add new yang model file and unit tests
How to verify it
UT and compile sonic_yang_models-1.0-py3-none-any.whl and sonic_yang_mgmt-1.0-py3-none-any.whl
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
Why I did it
When lldpmgrd handled events of other tables besides PORT_TABLE, error message was printed to log.
How I did it
Handle event according to its file descriptor instead of looping all registered selectables for each coming event.
How to verify it
I verified same events are being handled by printing events key and operation, before and after the change.
Also, before the change, in init flow after config reload, when lldpmgrd handled events of other tables besides PORT_TABLE, error messages were printed to log, this issue is solved now.
- Why I did it
To add support for 800G speed for port in the yang.
- How I did it
Change limitation from 400G to 800G.
- How to verify it
Set a port speed to 800G and run the yang DB validation. e.g. by using dynamic port breakout.
Co-authored-by: ecsonic <ecsonic@edge-core.com>
Why I did it
The customer report of the PCIe Bus Errors upon the SDK initialization of as7816-64x.
How I did it
Based on the internal info and discussion, update "pcie_aspm=off" into ONIE_PLATFORM_EXTRA_CMDLINE_LINUX of installer.conf to resolve it.
#### Why I did it
Need to pass LY_CTX_DISABLE_SEARCHDIR_CWD to Context in order to disable automatically searching for schemas in current working directory (which is by default searched automatically)
#### How I did it
add additional attribute into YANG context
#### How to verify it
Create some invalid link on switch :
1) **ln -s /usr/abc xxx**
2) run **spm list**
--> There should not be these messages:
```
libyang[1]: Unable to get information about "xxx" file in "/tmp" when searching for (sub)modules (No such file or directory)
libyang[1]: Unable to get information about "xxx" file in "/tmp" when searching for (sub)modules (No such file or directory)
libyang[1]: Unable to get information about "xxx" file in "/tmp" when searching for (sub)modules (No such file or directory)
libyang[1]: Unable to get information about "xxx" file in "/tmp" when searching for (sub)modules (No such file or directory)
```
Why I did it
The buffer pool & profile setting in buffer template was not correct and caused the errors like the following:
ERR swss#orchagent: :- parseReference: malformed reference:[BUFFER_PROFILE|ingress_lossless_profile]. Must not be surrounded by [ ]
How I did it
Fix the buffer pool & profile setting by removing "[]".
How to verify it
Loaded image with this fix in a switch and made sure the error was not seen anymore.
- Why I did it
Profiling the system state on init after fast-reboot during create_switch function execution, it is possible to see few python scripts running at the same time.
This parallel execution consume CPU time and the duration of create_switch is longer than it should be.
Following this finding, and the motivation to ensure these services will not interfere in the future, PMON is delayed in 90 seconds until the system finish the init flow after fastboot.
- How I did it
Add a timer for PMON service.
Exclude for MLNX platform the start trigger of PMON when SYNCD starts in case of fastboot.
Copy the timer file to the host bin image.
- How to verify it
Run fast-reboot on MLNX platform and observe faster create_switch execution time.
Add the following commits:
- [orchagent, crm]: Reset crm threshold exceed count when threshold type changed 5ba6a54786c0fd9b155bb9ea2a7ed724a58aab74
- [pbh] [aclorch] Fixed a bug causes by updating the flow-counter value for the PBH rule 841f00389b338e91ddc4de460ace4ff96adfa796
- [ACL]Avoid incrementing crm count when ACL rule create fails 3d3364f9715fa05fbdf2d09b08676c3055903b84
- set remote vtep the netdev down before delete 7f53db782aed2973f4ff6807911b5a549461f3c7
- Removing Vnet with scope default 2ea8581da4ba6f97bebde4845a234d7c810e5515
Update SDK/FW to 4.5.1500/2010.1500 and SAI version to 1.21.1.1
SDK/FW features:
1. Added support for Finisar DR4 (FTCD4523E2PCM) on Spectrum-2 and Spectrum-3 systems.
SAI Features:
1. ECMP overlay support for IPv6
2. BFD offloading / 4K scale
3. Host interface user traps + improved trap registration (table entry)
4. gcc11 compilation fixes
5. Read support for ACL redirect action
6. Optimize ECMP DB size
7. Buffer descriptors new defaults
8. Updated port mapping for SN2201
SAI Fixes:
1. Debug counter removal when configured with all drop reasons
- Why I did it
Upgrade Mellanox SDK and SAI versions to latest
- How I did it
Updated submodule pointers
- How to verify it
Regression tested
#### Why I did it
Adding exceptlionList to validation exception
#### How I did it
Check code.
#### How to verify it
Ran manually.
- Run full config validation from a KVM
- Print the thrown exception
**Before**
```
Error: Data Loading Failed
All Keys are not parsed in FEATURE
dict_keys(['telemetry'])
```
**After**
```
Error: Data Loading Failed
All Keys are not parsed in FEATURE
dict_keys(['telemetry'])
exceptionList:["'status'"]
```
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/SONiC/wiki/Configuration.
-->
#### A picture of a cute animal (not mandatory but encouraged)
- Why I did it
Profiling the system state on init after fast-reboot during create_switch function execution, it is possible to see few python scripts running at the same time.
This parallel execution consume CPU time and the duration of create_switch is longer than it should be.
Following this finding, and the motivation to ensure these services will not interfere in the future, LLDP is delayed in 90 seconds until the system finish the init flow after fastboot.
- How I did it
Add a timer for LLDP service.
Copy the timer file to the host bin image.
- How to verify it
Run fast-reboot on MLNX platform and observe faster create_switch execution time.
This PR is dependent on PR: #10567
Currently, the build dockers are created as a user dockers(docker-base-stretch-<user>, etc) that are
specific to each user. But the sonic dockers (docker-database, docker-swss, etc) are
created with a fixed docker name and common to all the users.
docker-database:latest
docker-swss:latest
When multiple builds are triggered on the same build server that creates parallel building issue because
all the build jobs are trying to create the same docker with latest tag.
This happens only when sonic dockers are built using native host dockerd for sonic docker image creation.
This patch creates all sonic dockers as user sonic dockers and then, while
saving and loading the user sonic dockers, it rename the user sonic
dockers into correct sonic dockers with tag as latest.
docker-database:latest <== SAVE/LOAD ==> docker-database-<user>:tag
The user sonic docker names are derived from 'DOCKER_USERNAME and DOCKER_USERTAG' make env
variable and using Jinja template, it replaces the FROM docker name with correct user sonic docker name for
loading and saving the docker image.
* Upgrade docker version from 20.10.7 to 20.10.14, and pin containerd.io
Update the Docker engine version from 20.10.7 to 20.10.14. This brings
in some CVE and bug fixes.
Additionally, pin the version of containerd.io to a specific version,
mainly for consistency/reproducibility.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Remove the containerd ordering change to docker.service
This appears to be already present in the current docker.service.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Remove use of apt-key
apt-key is considered deprecated, and the current practice is to just
add the key into /etc/apt/trusted.gpg.d/.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Upgrade docker container in Bullseye slave to 20.10.14
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
Can not start sonic-hostservice
How I did it
Install python3-dbus and systemd-python, and replace invalid path
How to verify it
Start the service with below commands:
sudo systemctl start sonic-hostservice
sudo systemctl status sonic-hostservice
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Migrate ptftests script to python3, in order to do an incremental migration, add python virtual environment firstly, install all required python packages in virtual env as well.
Then migrate ptftests scripts from python2 to python3 one by one avoid impacting non-changed scripts.
Signed-off-by: Zhaohui Sun zhaohuisun@microsoft.com
How I did it
Add python3 virtual environment for docker-ptf.
Add submodule ptf-py3 and install patched ptf 0.9.3 into virtual environment as well, two ptf issues were reported here:
p4lang/ptf#173p4lang/ptf#174
Signed-off-by: Zhaohui Sun <zhaohuisun@microsoft.com>
Why I did it
Recirc port is used to only forward traffic from one asic to another asic. So it's not required to configure LLDP on it.
How I did it
Add interface prefix helper for recirc port. Similar to skip configuring LLDP on inband port, add check in lldpmgrd to skip recirc port by checking interface prefix.
Asic PCI ID (PCI address) is collected by chassisd (inside pmon -
Azure/sonic-platform-daemons#175) and saved in CHASSIS_STATE_DB (in
redis_chassis). CHASSIS_STATE_DB is accessible by swss containers.
At docker-init.sh (script is called after swss container is created and before
anything that could run in swss like orchagent...), we wait until asic PCI ID
of the corresponding asic is populated by chassisd. We then update asic_id in
CONFIG_DB of asic's database.
A system supporting dynamic asic PCI ID identification requires to have a file
(empty) use_pci_id_chassis in its platform dir.
When orchagent runs, it has correct asic PCI ID in its CONFIG_DB.
Together with this PR:
Azure/sonic-platform-daemons#175Azure/sonic-platform-common#185
Signed-off-by: Maxime Lorrillere <mlorrillere@arista.com>
Co-authored-by: Maxime Lorrillere <mlorrillere@arista.com>
