- Why I did it
When PSU is powered off, the PSU is still on the switch and the air flow is still the same. In this case, it is not necessary to set FAN speed to 100%.
- How I did it
When PSU is powered of, don't treat it as absent.
- How to verify it
Adjust existing unit test case
Add new case in sonic-mgmt
- Why I did it
This is to update the common sonic-buildimage infra for reclaiming buffer.
- How I did it
Render zero_profiles.j2 to zero_profiles.json for vendors that support reclaiming buffer
The zero profiles will be referenced in PR [Reclaim buffer] Reclaim unused buffers by applying zero buffer profiles #8768 on Mellanox platforms and there will be test cases to verify the behavior there.
Rendering is done here for passing azure pipeline.
Load zero_profiles.json when the dynamic buffer manager starts
Generate inactive port list to reclaim buffer
Signed-off-by: Stephen Sun <stephens@nvidia.com>
- Why I did it
If multiple Vlans are configured to have DHCPv6 relay, only one relay instance is able to capture DHCP packets received from upstream, this is as a result of kernel design to operate this way (SO_REUSEPORT).
DHCPv6 transmit unicast packets to clients, only multicast packets can be captured on multiple application listening on the same UDP port.
This issue causing only one Vlan interface to get packets from servers.
- How I did it
Change the design to neglect Vlan isolation and run only one relay instance serving all Vlans with all configured DHCP servers.
- How to verify it
Run DHCPv6 relay test with 2 Vlans configured do have a DHCP relay.
Signed-off-by: Shlomi Bitton <shlomibi@nvidia.com>
This is to address an issue where it was observed that SAI operations sometime may take a very long to time complete (over 45ms). It was determined that the ALPM distributed thread was causing this issue.
The fix is to disable this debug thread that has no functional purpose.
Preliminary tests looks fine. BGP neighbors were all up with proper routes programmed
interfaces are all up
Manually ran the fib test cases on 7050CX3 (TD3), TD2, TH, TH2, and TH3 based platforms and
thy all passed.
Note: the testing was done over 20201230 image and are porting this change to master branch.
No need to port this to 20201230 branch as a separate PR was already done for that branch. (#9190)
this PR is created to port the changes made by (#9199) but could not be cherry picked directly to 202106 branch.
sonic-snmpagent
7e46eb1 [201911][RFC1213]: Initialize lag oid map in reinit_data (#234)
aa98ded CPU Spike because of redundant and flooded keyspace notifis handled (#230)
sonic-swss
bc4e334 [Mux orch] Handle setting unknown mux state (#1984)
bd3630b [tunnel decap] Change tunnel orch order (#1977)
87a673a Fix the option missing in kernel config issue (#1973)
57967a1 [orchagent] Fix group name of port-buffer-drop in flexcounterorch.cpp (#1967)
sonic-utilities
181e8b0 Fix the option missing in kernel config issue (#1888)
21c0cc0 [watermarkstat] Fix for error in processing empty array from couters db (#1810)
7f15755 [chassis][supervisor][show][interfaces]show interfaces command warning on Supervisor card (#1771)
Signed-off-by: Neetha John <nejo@microsoft.com>
Why I did it
Storage T0's have all vlan members as tagged
How I did it
Since currently minigraph does not have a unique way to identify if a vlan member is tagged/untagged and to ensure other scenarios are not broken, the logic used is to just update the vlan member type as 'tagged' when we determine that it is a storage backend device. This change will apply only to storage backend T0's since storage backend T1's will not have vlan member information
How to verify it
Updated the storage backend T0 testcases to check for tagged vlan members
Added testcase to check if a T1 and backend T1 device generates an empty vlan member table
Existing vlan member testcases are good enough for checking if any regression has been caused for regular T0's
Build sonic_config_engine-1.0-py3-none-any.whl successfully
* [Nokia ixs7215] Platform API fixes
This commit delivers the following fixes
- Fix bug preventing access to second PSU eeprom
- Fix bug preventing updates to front panel PSU status led
- Fix SFP reset test case failure
* Fix LGTM alert
This commit more fully declares the HW capabilities of the Nokia-7215
platform. For example, support for the threshold values associated with each
thermal sensor is described. The intent here is to inform the sonic-mgmt
platform test cases of which HW features are supported.
This commit must align with PR# 4521 within the sonic-mgmt git repo which is
currently under review. Any changes to that PR will need to be reflected in
this commit.
Fix the check used to wait for interfaces to come up. The group name in
the supervisor config files has changed from isc-dhcp-relay to
dhcp-relay.
Also, in the wait script, wait 10 additional seconds after the vlans,
port channels, and any interfaces are up. This is because dhcrelay
listens on all interfaces (in addition to port channels and vlans), and
to ensure that it stays in a clean state during runtime, wait some extra
time to make sure that those interfaces are created as well.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
- Why I did it
Wrong SKU configuration will lead to longer init flow.
This will affect fast-reboot feature by increasing the traffic downtime.
Since MLNX met the required downtime period with this SKU this bug found with a delay.
- How I did it
Add the required split labels for ports.
- How to verify it
Run fast-reboot with this platform using SN3800-D112C8 SKU.
swss
73caba3 Allow interface type value none (#1991)
utilities
32e530f Allow interface type value none (#1902)
53f066c Fix log_ssd_health hang issue (#1904)
This PR allow user to set none value to interface type. So there is a way to achieve the goal via CLI:
config interface type XXX none
config interface speed XXX 10000
config interface type XXX CR
* Changed Debian package dependency in order to support both python or python3 packages
* Fix Python scripts to be compatible with python2.7/python3 versions
* hw-mgmt: attributes: Fix PSU power sensor attributes capability
Signed-off-by: Volodymyr Samotiy <volodymyrs@nvidia.com>
- Why I did it
In case an app.ext requires a dependency syncd^1.0.0, the RPC version of syncd will not satisfy this constraint, since 1.0.0-rpc < 1.0.0. This is not correct to put 'rpc' as a prerelease identifier. Instead put 'rpc' as build metadata in the version: 1.0.0+rpc which satisfies the constraint ^1.0.0.
- How I did it
Changed the way how to version in RPC and DBG images are constructed.
- How to verify it
Install app.ext with syncd^1.0.0 dependency on a switch with RPC syncd docker.
Signed-off-by: Stepan Blyshchak <stepanb@nvidia.com>
- Why I did it
docker-orchagent was missing libsairedis version label.
E.g. Currently only swsscommon is recorded in the labels:
admin@arc-switch1038:~$ docker inspect docker-orchagent | grep versions
"com.azure.sonic.versions.libswsscommon": "1.0.0"
With this change libsairedis is also recorded:
admin@arc-switch1038:~$ docker inspect docker-orchagent | grep versions
"com.azure.sonic.versions.libswsscommon": "1.0.0"
"com.azure.sonic.versions.libsairedis": "1.0.0"
- How I did it
By expanding the list of dependencies.
- How to verify it
Build and verify the label for libsairedis exists in docker-orchagent.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Adding a release file for 202106. Without it 'release' in sonic_version.yml appears to be none. It should be 202106. This is required for QoS scripts in sonic-mgmt to pick a schema based on release branch
Signed-off-by: Sudharsan Dhamal Gopalarathnam <sudharsand@nvidia.com>
#### Why I did it
Fixed an issue that changing SDK version leads to cache framework taking cached syncd RPC image rather then rebuilding syncd RPC based on new syncd with new SDK.
Investigation showed that cache framework calculates a component hash based on direct dependencies. Syncd RPC image hash consists of two parts: one is the flags of syncd RPC (platform, ENABLE_SYNCD_RPC) and syncd RPC direct dependencies makefiles. None of the syncd RPC direct dependencies are modified when SDK version changes, so hash is unchanged.
#### How I did it
To fix this issue, include the hash of dependencies into current component hash calculation, e.g.:
In calcultation of the hash ```docker-syncd-mlnx-rpc.gz-274dfed3f52f2effa9989fc-39344350436f9b06d28b470.tgz```, the hash of syncd is included: ```docker-syncd-mlnx.gz-48ee88ac54b201e0e107b15-7bbea320025177a2121e440.tgz``` in which the hash of SDK is included.
#### How to verify it
Build with cache enabled and check that changing SDK version leads to a different hash of syncd rpc image:
SDK version 4.5.1002:
```
docker-syncd-mlnx.gz-48ee88ac54b201e0e107b15-7bbea320025177a2121e440.tgz
docker-syncd-mlnx-rpc.gz-274dfed3f52f2effa9989fc-39344350436f9b06d28b470.tgz
```
SDK version 4.5.1002-005:
```
docker-syncd-mlnx.gz-18baf952e3e0eda7cda7c3c-e5668f4784390d5dffd55af.tgz
docker-syncd-mlnx-rpc.gz-4a6e59580eda110b5709449-552f76be135deaf750aeab2.tgz
```
Depends on Mellanox hw-mgmt 7.0010.3300
Why I did it
Adjust LED logical according to hw-mgmt change.
How I did it
Add a trigger to set LED to blink.
How to verify it
Manual test
- Why I did it
To include the following changes:
* b684149 [techsupport] [202106] Removed -i option for docker commands and Improved Error Reporting (#1843)
- How I did it
Updated sonic-utilities submodule pointer.
- How to verify it
Build an image and run sonic-mgmt tests.
This is due to the SERVICE variable declared after reading a file
#### Why I did it
To fix an issue that dhcp_relay does not restart with swss.
#### How I did it
Fixed in the swss.sh script
#### How to verify it
sudo systemctl restart swss
verify dhcp_relay restarts as well.
- Why I did it
Bug fix:
bad_param request due to missing parser rest command while running mlxlink
- How I did it
Advance to MFT tool version to 4.17.2-12.
- How to verify it
Manually tested on all mellanox platforms.
- Why I did it
Upgrade to the latest version of hardware management in order to incorporate the latest bugfixes and drivers in the kernel.
- How I did it
Updated the version number and submodule for hw-mgmt.
- How to verify it
This has been verified on all Mellanox platforms through a combination of sonic-mgmt tests and other internal verification.
88cfbc3 [Buffermgr]Graceful handling of buffer model change (#1956)
7f87a12 Orchagent validates mirror session queue parameter against maximum value from SAI (#1957)
* To add portchannel support in frrcfgd and bgpcfgd
* Update is_zero_ip() to handle portchannel name
Signed-off-by: d-dashkov <Dmytro_Dashkov@Jabil.com>
Why I did it
Currently the mellanox platform API is validating the file extensions of firmware packages to be installed for basic sanity checking. However, ONIE packages do not have an extension and as such if there is a "." in the name it is taken to be an extension and then fails the sanity check.
How I did it
I removed the check which ensures that ONIE images don't have a file extension.
How to verify it
Name the ONIE updater file 2021.onie and attempt to install it via fwutil install fw 2021.onie --yes
Why I did it
The fwutil update all utility expects the auto_update_firmware method in the Platform API to execute the update_firmware() call and not the install_firmware() call.
How I did it
Changed the method in the mellanox platform API component implementation.
How to verify it
Run fwutil update all with a CPLD update on a Mellanox platform and verify that it properly updates the firmware using the MPFA file.
Redis 4.0.0b1 has been uploaded to pip as a prerelease version. This
version drops support for Python 2 and only supports Python 3. Because
setup.py is being run, it will use the latest version of a package and
not the latest stable version (which is still 3.5.3).
Therefore, pin the redis package to version 3.5.3, so that it will work
for both Python 2 and 3.
#### How to verify it
Make sure that redis-dump-load for Python 2 builds today.
Why I did it
With current code the delay will take place even if simple 'config reload' command executed and this is not desired.
This delay should be used only when fast-rebooting.
How I did it
Change the type of delay to OnBootSec instead of OnActiveSec.
How to verify it
Fast-reboot with this PR and observe the delay.
Run 'config-reload' command and observe no delay is running.
