The deepdiff python package was recently updated to 6.2.3. As part of
this, a dependency was introduced on orjson. There's no armv8l python
wheel available for orjson, which means it needs to be built from
source. However, building it requires rust (which Buster and Bullseye
don't have a new enough version of) and maturin.
As a quick fix, pin this to version 6.2.2, before the orjson dependency
is introduced.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
What I did:
Fix : #13117
How I did:
During build time mask only those feature/services that are disabled explicitly. Some of the features ((eg: teamd/bgp/dhcp-relay/mux/etc..)) state is determine run-time so for those feature by default service will be up and running and then later hostcfgd will mask them if needed.
So Default behavior will be
init_cfg.json.j2 during build time make state as disabled then mask the service
init_cfg.json.j2 during build time make state as another jinja2 template render string than do no mask the service
init_cfg.json.j2 during build time make state as enabled then do not mask the service
How I verify:
Manual Verification.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
Co-authored-by: abdosi <58047199+abdosi@users.noreply.github.com>
Why I did it
Update the Nokia-7215 device data which is required by the new version of the Marvell SAI 1.10.2-2 to fix the syncd crash issue.
How I did it
Update the device data in folder device/nokia/armhf-nokia_ixs7215_52x-r0 /Nokia-7215.
How to verify it
With this PR, syncd should be running fine. Syncd should not crash.
Signed-off-by: mlok <marty.lok@nokia.com>
Update sonic-utilities submodule pointer to include the following:
* dddd6c5 [202205] Revert the show-techsupport optimization PR's ([#2581](https://github.com/sonic-net/sonic-utilities/pull/2581))
Signed-off-by: dprital <drorp@nvidia.com>
Why I did it
To keep 'Request for xxx branch' label when finished auto-cherry-pick.
How I did it
Change logic in post cherry pick action.
How to verify it
Why I did it
This is to fix test_forward_ip_packet_with_0xffff_chksum_tolerant test failure on 720DT-48S. IP packets with checksum set to 0xffff will be forwarded with the same checksum on this platform, instead of updating to the correct value.
How I did it
Add bcm config sai_verify_incoming_chksum=0 so that checksum is updated instead of being left unchanged when checksum is 0xffff. Note that packets with invalid checksum are still dropped with this config.
Why I did it
In the voq chassis the buffer_queue configuration needs to be applied on system_port instead of the sonic port.
This PR has the change to do this.
How I did it
Modify buffer_config.j2 to generate buffer_queue configuration on system_ports if the device is Voq Chassis
How to verify it
Verify the buffer_queue configuration is generated properly using sonic-cfggen
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
Update sonic-utilities submodule pointer to include the following:
3cb66b4 [202205] Preserve copp tables through DB migration (2524) (#2574)
Update sonic-swss submodule pointer to include the following:
c9ca7c8 Modify coppmgr mergeConfig to support preserving copp tables through reboot. (#2548)
Signed-off-by: dprital <drorp@nvidia.com>
The display of azure pipeline is not specific now, such as when the step Run test fails, the display of itself shows successful, but the display of step Kvmdump shows fails, but actually, the step Kvmdump doesn't fail. I improve the display of azure pipeline in this pr, each step has its own success or failure, and is shown in azure pipeline.
Why I did it
The display of azure pipeline is not specific now, such as when the step Run test fails, the display of itself shows successful, but the display of step Kvmdump shows fails, but actually, the step Kvmdump doesn't fail. I improve the display of azure pipeline in this pr, each step has its own success or failure, and is shown in azure pipeline.
How I did it
Each step has its own signature of success or failure.
Using the chain of responsibility pattern to manage all status.
Modify the expected-state in each step.
- Why I did it
To include latest fixes and new functionality
* SAI
1. Temporary WA for query enum capabilities for tunnel peer mode, to not return P2P
2. sai debug dump returns while last extra dump is running
3. open inner SRC and DST IP for ECMP / LAG general hash objects
4. tunnel peer mode returns hard coded
5. tunnel decap dscp mode
6. support default tunnel src ip
7. failure to add a port to a LAG in VLANs configured with flood_ctrl
8. Add P2P peer mode for IP in IP tunnels
9. Add per port IP counters
10. Clean up VXLAN srcport static (XML) functionality, as only dynamic (API) is in use
11. Fix enum capabilities of native hash fields
12. sai_acl_db_group_ptr usage
13. Clean QoS config of the LAG when all members was removed (bug
* SDK/FW
1. Fixed bug in recovery mechanism in case of I2C error when trying to access the XSFP module.
2. On the NVIDIA Spectrum-2 switch, when receiving a packet with Symbol Errors on ports that are configured to cut-thought mode, a pipeline might get stuck.
3. On the Spectrum-2 and Spectrum-3 switch, if you enable ECN marking and the port is in split mode, traffic sent to the port under congestion (for example, when connecting two ports with a total speed of 50GbE to a single 25GbE port) is not marked.
5. Modifying existing entry/Adding new one when switch is at its maximum capacity (full by maximum allowed entries from any type such as routes, FDB, and so forth), will fail with an error.
6. When many ports are active (e.g., 70 ports up), and the configuration of shared buffer is applied on the fly, occasionally, the firmware might get stuck.
7. When a system has more than 256 ACL rules, on rare occasion, removing/adding rules may cause some ACL rules not to work.
8. On SN2201 system, on RJ45 port, the link might appear in 'down' state even if it operations properly.
9. Layer 4 port information is not initialized for BFD packet event. To address the issue, remote peer UDP port information was added in BFD packet event.
10. When setting LAG as a SPAN analyzer, the distributor mode of the LAG members was not taken into account. It may happen that the LAG member with distributor mode disabled will be set as a SPAN analyzer port.
- How I did it
Updated SDK/SAI submodule and relevant makefiles with the required versions.
- How to verify it
Build an image and run tests from "sonic-mgmt".
Signed-off-by: Volodymyr Samotiy <volodymyrs@nvidia.com>
Update sonic-utilities submodule pointer to include the following:
* c9ed09d [202205] [sonic_installer] use /etc/resolv.conf from the host when migrating packages (#2573) ([#2575](https://github.com/sonic-net/sonic-utilities/pull/2575))
Signed-off-by: dprital <drorp@nvidia.com>
Update sonic-utilities submodule pointer to include the following:
3bc2bc6 [Mellanox][202205] Change severity to NOTICE in Mellanox buffer migrator when unable to fetch DEVICE_METADATA due to empty CONFIG_DB during initialization (#2570)
e1c8243 [202205][generate_dump] Fix for a deletion flow for all secret files in the techsupport dump (#2572)
9f2984a [202205] Fix issue: unconfigured PGs are displayed in watermarkstat (#2568)
f7988b0 [202205] [timer.unit.j2] use wanted-by in timer unit (#2561)
f45dcfb [generate_dump] Optimize the execution time of 'show techsupport' CLI by paraller function execution (#2565)
67cbb15 [202205]Fixes 12170: Delete subinterface and recreate the subinterface in default-vrf (#2564)
93172c4 [202205] [generate_dump] Optimize the execution time of the 'show techsupport' script to 5-10% by reducing calls to the 'tar append' operation (#2562)
Signed-off-by: dprital <drorp@nvidia.com>
Why I did it
why
In order to apply different config across different platform, and use the code with a unified format, reuse syncd init script to init saiserver.
How I did it
how
Reuse syncd init script
How to verify it
Test
Test in DUT s6000 and dx010 with sonic 202205
Why I did it
Unify the Debian mirror sources
Make easy to upgrade to the next Debian release, not source url code change required. Support to customize the Debian mirror sources during the build
Relative issue: #12523
How I did it
How to verify it
Avoid traceback on sonic-clear command
sonic-clear dhcp6relay_counters
Traceback (most recent call last):
File "/usr/local/bin/sonic-clear", line 8, in <module>
sys.exit(cli())
File "/usr/local/lib/python3.9/dist-packages/click/core.py", line 764, in __call__
return self.main(*args, **kwargs)
File "/usr/local/lib/python3.9/dist-packages/click/core.py", line 717, in main
rv = self.invoke(ctx)
File "/usr/local/lib/python3.9/dist-packages/click/core.py", line 1137, in invoke
return _process_result(sub_ctx.command.invoke(sub_ctx))
File "/usr/local/lib/python3.9/dist-packages/click/core.py", line 956, in invoke
return ctx.invoke(self.callback, **ctx.params)
File "/usr/local/lib/python3.9/dist-packages/click/core.py", line 555, in invoke
return callback(*args, **kwargs)
File "/usr/local/lib/python3.9/dist-packages/clear/plugins/dhcp-relay.py", line 19, in dhcp6relay_clear_counters
counter = DHCPv6_Counter()
NameError: name 'DHCPv6_Counter' is not defined
- How I did it
Corrected the way to import using importlib
- How to verify it
Tested the sonic-clear command and verified no traceback is seen
Why I did it
Currently sonic-slave-* tag is confusing. Set correct tag on sonic-slave-* image.
Fix job name to fit the build.
How I did it
build amd image in amd64:
sonic-slave-bullseye:cfe29bff67c
sonic-slave-bullseye:latest
sonic-slave-bullseye:master
build armhf image in amd64:
sonic-slave-bullseye-march-armhf:33614806dc3
sonic-slave-bullseye-march-armhf:latest
sonic-slave-bullseye-march-armhf:master
build arm64 image in amd64:
sonic-slave-bullseye-march-arm64:f3b1b16c801
sonic-slave-bullseye-march-arm64:latest
sonic-slave-bullseye-march-arm64:master
build arm64 image in arm64:
sonic-slave-bullseye:75cb326c9a7
sonic-slave-bullseye-arm64:latest
sonic-slave-bullseye:master
build armhf image in armhf:
sonic-slave-bullseye:64d178951fc
sonic-slave-bullseye-armhf:latest
sonic-slave-bullseye:master
How to verify it
Why I did it
Advance SAI Redis head pointer
How I did it
changes:
sonic-net/sonic-sairedis@cf679e7sonic-net/sonic-sairedis@8d6688e
[202205][Submodule][SAI]Advance SAI head pointer sonic-sairedis#1185 sonic-net/sonic-sairedis@66f2961
remove parameter --skip_error, which removed from [202205][Submodule][SAI]Advance SAI head pointer sonic-sairedis#1185
How to verify it
local image build
Why I did it
Makefile needs some dependencies from the Internet. It will fail for network related issue.
Retries will fix most of these issues.
How I did it
Add retries when running commands which maybe related with networking.
How to verify it
This PR is to backport #13100 to the 202205 branch since can not be cleanly cherry-picked.
Following code to judge whether a process is running inside a docker could get stuck on the simx platform
subprocess.Popen(["docker", "--version"],
stdout=subprocess.PIPE,
stderr=subprocess.STDOUT,
universal_newlines=True)
When it gets stuck, the config-chassisdb service can not be successfully started, thus the system can not be booted up.
root@sonic:/# service config-chassisdb status
config-chassisdb.service - Config chassis_db
Loaded: loaded (/lib/systemd/system/config-chassisdb.service; enabled; vendor preset: enabled)
Active: activating (start) since Thu 2022-12-15 09:23:02 UTC; 29min ago
Main PID: 571 (config-chassisd)
Tasks: 14 (limit: 9501)
Memory: 132.4M
CGroup: /system.slice/config-chassisdb.service
├─571 /bin/bash /usr/bin/config-chassisdb
├─575 /usr/bin/python3 /usr/local/bin/sonic-cfggen -H -v DEVICE_METADATA.localhost.platform
├─602 /bin/sh -c sudo decode-syseeprom -m
├─603 sudo decode-syseeprom -m
├─607 /usr/bin/python3 /usr/local/bin/decode-syseeprom -m
├─616 /bin/sh -c docker --version 2>/dev/null
└─617 docker --version
- How I did it
Use an alternative way to implement this function and issue can be avoided:
docker_env_file = '/.dockerenv'
return os.path.exists(docker_env_file) is False
- How to verify it
run regression on real hardware and simx platform.
Why I did it
In order to prevent the sonic-mgmt/tests/platform_tests/sfp/test_sfputil.py test failing on the log analyzer step.
The mentioned test is performing the sfputil reset EthernetX for every interface on the SONiC switch, this action will flap the SFP device status (INSTERTED -> REMOVED -> INSTERTED).
The SONiC XCVRD daemon will catch this SFP device status change (because it is monitoring the presence status of the cable).
To judge the cable presence status, currently, we are still leveraging to read the first bytes of the EEPROM, and the EEPROM could be not ready at some moment and the SONiC XCVRD daemon will print the error log to Syslog:
ERR pmon#xcvrd: Error! Unable to read data for 'xx' port, page 'xx' offset 128, rc = 1, err msg: Sending access register
How I did it
Change logging severity from ERR to WARNING
Signed-off-by: Vadym Hlushko <vadymh@nvidia.com>
Add missing system_ref_core_clock_khz in Arista-7800R3A-36D2-C36 and Arista-7800R3A-36D2-C72
Co-authored-by: Maxime Lorrillere <mlorrillere@arista.com>
This PR is a required for changing the L3 IP forwarding Behavior to SoC in active-active toplogy.
Basically a src IP is added to the SNAT rule so that only packets originating from ToR with src IP as vlan IP get natted by the rule and change the src IP to LoopBack IP
Master Branch PR with combined change is here
sonic-net/sonic-host-services#3
How I did it
check the config DB if the ToR is a DualToR and has an SoC IP assigned.
put an iptable rule
iptables -t nat -A POSTROUTING --destination -j SNAT --to-source "
Signed-off-by: vaibhav-dahiya vdahiya@microsoft.com
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Port indexes of front panel ports are not contiguous in multi-asic because we didn't distiguish between
front panel and internal ports, e.g., recycle ports. Fix this by assigning index to front panel port first
and then internal ports.
Co-authored-by: Song Yuan <64041228+ysmanman@users.noreply.github.com>
Why I did it
To ensure, that after a BGP startup, dualtor T0 receives BGP updates before sending out BGP updates.
Please refer to sonic-net/SONiC#1161 for more details.
How I did it
add coalesce-time 10000 to the frr bgp startup config.
Signed-off-by: Longxiang Lyu <lolv@microsoft.com>
Signed-off-by: Longxiang Lyu <lolv@microsoft.com>
Why I did it
To bring the following fixes:
Applied customer patch for limited port breakout support in rel_ocp_sai_7_1.
Revert "Merged PR 7224850: SAI7.1_DNX: Temp workaround for Nexthop Group Scale Issue(CS00012251649)".
backport SONIC-67662 to SAI7.1:JR2C ECMP partition for NHgroup members.
How I did it
Updated SAI code with the fixes above.
How to verify it
Run the SONiC and SAI test with the SAI pipeline.
Add missing aggregate port_config.ini needed by sonic-mgmt
Concatenate the ASIC specific port_config.ini from device/arista/x86_64-arista_7800r3a_36d2_lc/Arista-7800R3A-36D2-C36/[01] to create the aggregate file.
