Update SDK/FW to 4.5.4318/2010.4316 and SAI to 2205.25.1.2 in order to include listed below fixes.
SDK/FW
In some cases, when an ACL has two or more rules with a similar key, modifying/removing one of the rules may cause modification/removal of one of the similar-key rules, instead of the requested rule.
Using module SPQCELRCDFB when connected to a 3rd party switch, there may either be no link or a very long link up time (~2 minutes).
In some case warmboot from 201911 to 202205 might result in dataplane traffic loss
When upgrade SONiC version using warm boot from version 201911/202012 to newer version, then doing cold boot back to older version and upgrade again to newer one warm boot might be fail.
SAI
Added support for dynamic ordered ECMP group (SAI_NEXT_GROUP_TYPE_DYNAMIC_ORDERED_ECMP)
"store and forward" KV was added
Added Support for IPV6 link local debug counters
---------
Signed-off-by: Volodymyr Samotiy <volodymyrs@nvidia.com>
* sdk debs are now downloaded as Spectrum-SDK-Drivers-SONiC-Bins release
* sx kernel is downloaded as zip from Spectrum-SDK-Drivers
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
Why I did it
golang lib xmlquery v1.2.1 has critical security issue. MS Component Governance created an alert.
Update submodule HEAD to fix CG alert about CVE-2020-25614
How I did it
sonic-mgmt-framework
a72d9ee Fix CG alert CVE-2020-25614 about xmlquery v1.2.1 (#91)
sonic-telemetrey
727aefd Fix CG alert CVE-2020-25614 about xmlquery v1.2.1 (#107)
Why I did it
Change the path of sonic submodules that point to "Azure" to point to "sonic-net"
How I did it
Replace "Azure" with "sonic-net" on all relevant paths of sonic submodules
Why I did it
src/dhcprelay is being split out to be its own submodule.
How I did it
Add existing dhcprelay commits into the new repo.
Clean up Makefile (sonic-net/sonic-dhcp-relay@772625f)
Add LGTM config (sonic-net/sonic-dhcp-relay@5cc0889)
Add Azure pipeline config (sonic-net/sonic-dhcp-relay@c79cdb7)
Add submodule reference, renaming most references of dhcp6relay to dhcprelay (to reflect that this will not just be for IPv6 in the future).
How to verify it
Successful run of LGTM is tested at sonic-net/sonic-dhcp-relay#4. Failure run of LGTM is tested at sonic-net/sonic-dhcp-relay#3.
Azure pipeline is run for each commit/PR, and will build for amd64, armhf, and arm64. UT/code coverage check is not yet done.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
Upgrade FRR to version 8.2.2. Build libyang2 required by FRR.
How I did it
Update FRR version and tag.
How to verify it
Following tests were performed on sonic-vs:
BGP docker status check
BGP configuration and session establishment
Route redistribution and ping
Issued show commands to check the bgp neighbor and routes
Checked app-db to ensure bgp routes are installed with correct interface and nexthop.
Create VRF and check FRR knows the VRF
Check VRF routes are installed in app-db with correct Vrf name and next-hop
Establish BGP Evpn session and check if Evpn routes (multicast, mac, prefix) are exchanged and installed correctly in app-db.
Why I did it
Migrate ptftests script to python3, in order to do an incremental migration, add python virtual environment firstly, install all required python packages in virtual env as well.
Then migrate ptftests scripts from python2 to python3 one by one avoid impacting non-changed scripts.
Signed-off-by: Zhaohui Sun zhaohuisun@microsoft.com
How I did it
Add python3 virtual environment for docker-ptf.
Add submodule ptf-py3 and install patched ptf 0.9.3 into virtual environment as well, two ptf issues were reported here:
p4lang/ptf#173p4lang/ptf#174
Signed-off-by: Zhaohui Sun <zhaohuisun@microsoft.com>
* [CG-Fix-CVE-2021-44906] Patching on thrift.0.14.1 for package minimist
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
* add more information in patch
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
* Update 0003-Remove-minimist-packages.patch
* change the thrift 0.14.1 to package download
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
* use the series file for patching
* fix a code defect
Why I did it
Running warm-reboot in a loop for 500 times leads to this error on 318-th iteration:
Apr 2 15:56:27.346747 sonic INFO swss#/supervisord: restore_neighbors Traceback (most recent call last):
Apr 2 15:56:27.346747 sonic INFO swss#/supervisord: restore_neighbors File "/usr/bin/restore_neighbors.py", line 24, in <module>
Apr 2 15:56:27.346747 sonic INFO swss#/supervisord: restore_neighbors from scapy.all import conf, in6_getnsma, inet_pton, inet_ntop, in6_getnsmac, get_if_hwaddr, Ether, ARP, IPv6, ICMPv6ND_NS, ICMPv6NDOptSrcLLAddr
Apr 2 15:56:27.346795 sonic INFO swss#/supervisord: restore_neighbors File "/usr/local/lib/python3.7/dist-packages/scapy/all.py", line 25, in <module>
Apr 2 15:56:27.346956 sonic INFO swss#/supervisord: restore_neighbors from scapy.route import *
Apr 2 15:56:27.346995 sonic INFO swss#/supervisord: restore_neighbors File "/usr/local/lib/python3.7/dist-packages/scapy/route.py", line 205, in <module>
Apr 2 15:56:27.347089 sonic INFO swss#/supervisord: restore_neighbors conf.iface = get_working_if()
Apr 2 15:56:27.347129 sonic INFO swss#/supervisord: restore_neighbors File "/usr/local/lib/python3.7/dist-packages/scapy/arch/linux.py", line 128, in get_working_if
Apr 2 15:56:27.347213 sonic INFO swss#/supervisord: restore_neighbors ifflags = struct.unpack("16xH14x", get_if(i, SIOCGIFFLAGS))[0]
Apr 2 15:56:27.347250 sonic INFO swss#/supervisord: restore_neighbors File "/usr/local/lib/python3.7/dist-packages/scapy/arch/common.py", line 31, in get_if
Apr 2 15:56:27.347345 sonic INFO swss#/supervisord: restore_neighbors return ioctl(sck, cmd, struct.pack("16s16x", iff.encode("utf8")))
Apr 2 15:56:27.347365 sonic INFO swss#/supervisord: restore_neighbors OSError: [Errno 19] No such device
The issue was reported to scapy devs secdev/scapy#3369, the fix is secdev/scapy#3371, however there is no released scapy version with this fix right now, thus decided to build scapy v2.4.5 from sources and apply the fix in a form of a patch.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
#### Why I did it
To bump the Thrift version to 0.14.1
- To avoid [CVE-2020-13949](https://nvd.nist.gov/vuln/detail/CVE-2020-13949)
- to fix some dependencies issues
#### How I did it
- rename `src/thrfit_0_13_0` to `src/thrift_2` to remove version number in the path. (`src/thrift` contains rules to build thrift 0.11.0 )
- Add thrift sources as submodule as there are no prepared debian packages for version >0.13.0 on [debian.org](https://packages.debian.org/search?searchon=sourcenames&keywords=thrift)
- Added patches with fixes for original thrift debian rules:(remove unneeded packages, fix multi job build)
#### How to verify it
```
BLDENV=buster make -f Makefile.work target/debs/buster/libthrift-dev_0.14.1_amd64.deb
```
- Add INCLUDE_PINS to config to enable/disable container
- Add Docker files and supporting resources
- Add sonic-pins submodule and associated make files
Submission containing materials of a third party:
Copyright Google LLC; Licensed under Apache 2.0
#### Why I did it
Adds P4RT container to SONiC for PINS
The P4RT app is covered by this HLD:
https://github.com/pins/SONiC/blob/master/doc/pins/p4rt_app_hld.md
#### How I did it
Followed the pattern and templates used for other SONiC applications
#### How to verify it
Build SONiC with INCLUDE_P4RT set to "y".
Verify that the resulting build has a container called "p4rt" running.
You can verify that the service is up by running the following command on the SONiC switch:
```bash
sudo netstat -lpnt | grep p4rt
```
You should see the service listening on TCP port 9559.
#### Which release branch to backport (provide reason below if selected)
None
#### Description for the changelog
Build P4RT container for PINS
This PR deletes local-to-buildimage linkmgrd and creates new submodule
pointing to github repo of sonic-linkmgrd.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
Why I did it
Support Nokia ixr7250E IMM and Supervisor cards
How I did it
Added modules x86_64-nokia_ixr7250e_sup-r0 and x86_64-nokia_ixr7250e_36x400g-r0 ../device/nokia directory.
Modified the platform/broadcom/one-image.mk to include NOKIA_IXR7250_PLATFORM_MODULE
Modified the platform/broadcom/rule.mk to include the platform-module-nokia.mk
Why I did it
Quagga is no longer being used. Remove quagga-related code (e.g., docker-fpm-quagga, sonic-quagga, etc.).
How I did it
Remove quagga-related code.
Introduce new sonic-buildimage images for Broadcom DNX ASIC family.
sonic-broadcom-dnx.bin
sonic-aboot-broadcom-dnx.swi
How I did it
NO CHANGE to existing make commands
make init; make configure PLATFORM=broadcom; make target/sonic-aboot-broadcom.swi; make target/sonic-broadcom.bin
The difference now is that it will result in new broadcom images for DNX asic family as well.
sonic-broadcom.bin, sonic-broadcom-dnx.bin
sonic-aboot-broadcom.swi, sonic-aboot-broadcom-dnx.swi
Note: This PR also adds support for Broadcom SAI 5.0 (based on 1.8 SAI ) for DNX based platform + changes in platform x86_64-arista_7280cr3_32p4 bcm config files and platform_env.conf files
Why I did it
Quagga is no longer being used. Remove quagga-related code (e.g., docker-fpm-quagga, sonic-quagga, etc.).
How I did it
Remove quagga-related code.
The HLD about MACsec feature is at :
https://github.com/Azure/SONiC/blob/master/doc/macsec/MACsec_hld.md
- How to verify it
This PR doesn't set MACsec container automatically start, You should manually start the container by docker run docker-macsec
wpa_supplicant binary can be found at MACsec container.
This PR depends on the PR, WPA_SUPPLICANT, and The MACsec container will be set as automatically start by later PR.
Signed-off-by: zegan <zegan@microsoft.com>
- Why I did it
New repo sonic-mgmt-common is introduced for the common translib related code. This commit adds build rules for this new repo.
- How I did it
Added sonic-mgmt-common submodule
Added build rules for the new sonic-mgmt-common repo. It creates two deb packages -- sonic-mgmt-common_1.0.0_{arch}.deb and sonic-mgmt-common-codegen_1.0.0_{arch}.deb. Package cache is enabled.
Added dependency on sonic-mgmt-common for mgmt-framework and telemetry debs and dockers.
- How to verify it
Full build and incremental builds
Basic ACL and interface opreations through REST, KLISH CLI and gNMI
- Description for the changelog
Git submodule and build rules for the new sonic-mgmt-common repo.
* Added sonic-mgmt-framework as submodule / docker
* fix build issues
* update sonic-mgmt-framework submodule branch to master
* Merged changes 70007e6d2ba3a4c0b371cd693ccc63e0a8906e77..00d4fcfed6a759e40d7b92120ea0ee1f08300fc6
00d4fcfed6a759e40d7b92120ea0ee1f08300fc6 Modified environemnt variables
* Changes to build sonic-mgmt-framework docker
* bumped up sonic-mgmt-framework commit-id
* version bump for sonic-mgmt-framework commit-it
* bumped up sonic-mgmt-framework commit-id
* Add python packages to docker
* Build fix for docker with python packages
* added libyang as dependent package
* Allow building images on NFS-mounted clones
Prior to this change, `build_debian.sh` would generate a Debian
filesystem in `./fsroot`. This needs root permissions, and one of the
tests that is performed is whether the user can create a character
special file in the filesystem (using mknod).
On most NFS deployments, `root` is the least privileged user, and cannot
run mknod. Also, attempting to run commands like rm or mv as root would
fail due to permission errors, since the root user gets mapped to an
unprivileged user like `nobody`.
This commit changes the location of the Debian filesystem to `/fsroot`,
which is a tmpfs mount within the slave Docker. The default squashfs,
docker tarball and zip files are also created within /tmp, before being
copied back to /sonic as the regular user.
The side effect of this change is that the contents of `/fsroot` are no
longer available once the slave container exits, however they are
available within the squashfs image.
Signed-off-by: Nirenjan Krishnan <Nirenjan.Krishnan@dell.com>
* bumped up sonc-mgmt-framework commit to include PR #18
* REST Server startup script is enahnced to read the settings from
ConfigDB. Below table provides mapping of db field to command line
argument name.
============================================================
ConfigDB entry key Field name REST Server argument
============================================================
REST_SERVER|default port -port
REST_SERVER|default client_auth -client_auth
REST_SERVER|default log_level -v
DEVICE_METADATA|x509 server_crt -cert
DEVICE_METADATA|x509 server_key -key
DEVICE_METADATA|x509 ca_crt -cacert
============================================================
* Replace src/telemetry as submodule to sonic-telemetry
* Update telemetry commit HEAD
* Update sonic-telemetry commit HEAD
* libyang env path update
* Add libyang dependency to telemetry
* Add scripts to create JSON files for CLI backend
Scripts to create /var/platform/syseeprom and /var/platform/system, which are back-end
files for CLI, for system EEPROM and system information.
Signed-off-by: Howard Persh <Howard_Persh@dell.com>
* In startup script, create directory where CLI back-end files live
Signed-off-by: Howard Persh <Howard_Persh@dell.com>
* build dependency pkgs added to docker for build failure fix
* Changes to fix build issue for mgmt framework
* Fix exec path issue with telemetry
* s5232[device] PSU detecttion and default led state support
* Processing of first boot in rc.local should not have premature exit
Signed-off-by: Howard Persh <Howard_Persh@dell.com>
* docker mount options added for platform, system features
* bumped up sonic-mgmt-framework commit id to pick 23rd July 2019 changes
* Added mount options for telemetry docker to get access for system and platform info.
* Update commit for sonic-utilities
* [dell]: Corrected dport map and renamed config files for S5232F
* Fix telemetry submodule commit
* added support for sonic-cli console
* [Dell S5232F, Z9264F] Harden FPGA driver kernel module
For Dell S5232F and Z9264F platforms, be more strict when checking state
in ISR of FPGA driver, to harden against spurious interrupts.
Signed-off-by: Howard Persh <Howard_Persh@dell.com>
* update mgmt-framework submodule to 27th Aug commit.
* remove changes not related to mgmt-framework and sonic-telemetry
* Revert "Replace src/telemetry as submodule to sonic-telemetry"
This reverts commit 11c3192975.
* Revert "Replace src/telemetry as submodule to sonic-telemetry"
This reverts commit 11c3192975.
* make submodule changes and remove a change not related to PR
* more changes
* Update .gitmodules
* Update Dockerfile.j2
* Update .gitmodules
* Update .gitmodules
* Update .gitmodules
reverting experimental change
* Removed syspoll for release_1.0
Signed-off-by: Jeff Yin <29264773+jeff-yin@users.noreply.github.com>
* Update docker-sonic-mgmt-framework.mk
* Update sonic-mgmt-framework.mk
* Update sonic-mgmt-framework.mk
* Update docker-sonic-mgmt-framework.mk
* Update docker-sonic-mgmt-framework.mk
* Revert "Processing of first boot in rc.local should not have premature exit"
This reverts commit e99a91ffc2.
* Remove old telemetry directory
* Update docker-sonic-mgmt-framework.mk
* Resolving merge conflict with Azure
* Reverting the wrong merge
* Use CVL_SCHEMA_PATH instead of changing directory for telemetry startup
* Add missing export
* Add python mmh3 to slave dockerfile
* Remove sonic-mgmt-framework build dep for telemetry, fix dialout startup issues
* Provided flag to disable compiling mgmt-framework
* Update sonic-utilites point latest commit id
* Point sonic-utilities to Azure accepted SHA
* Updating mgmt framework to right sha
* Add sonic-telemetry submodule
* Update the mgmt-framework commit id
Co-authored-by: jghalam <joe.ghalam@gmail.com>
Co-authored-by: Partha Dutta <51353699+dutta-partha@users.noreply.github.com>
Co-authored-by: srideepDell <srideep_devireddy@dell.com>
Co-authored-by: nirenjan <nirenjan@users.noreply.github.com>
Co-authored-by: Sachin Holla <51310506+sachinholla@users.noreply.github.com>
Co-authored-by: Eric Seifert <seiferteric@gmail.com>
Co-authored-by: Howard Persh <hpersh@yahoo.com>
Co-authored-by: Jeff Yin <29264773+jeff-yin@users.noreply.github.com>
Co-authored-by: Arunsundar Kannan <31632515+arunsundark@users.noreply.github.com>
Co-authored-by: rvasanthm <51932293+rvasanthm@users.noreply.github.com>
Co-authored-by: Ashok Daparthi-Dell <Ashok_Daparthi@Dell.com>
Co-authored-by: anand-kumar-subramanian <51383315+anand-kumar-subramanian@users.noreply.github.com>
* Update frr to frr-7.0.1
* Fix a typo
* Set right permissions on /etc/frr
* Convert external file links from debian to Azure
* Revert python3 fix
* Build frr using more than 1 job
* Add SWIG as dependency for libswss-common
* FRR 4.0 integration with SONiC
-- Uses SONiC FRR repo frr/4.0 (which has SONiC support) to build image
-- Makefile changes to make frr4.0 builtable.
-- Updated/Added FRR configuration files
-- bgpd jinja template fixes
To build SONiC images with FRR4.0, simply edit rules/config file and change
routing stack to following:
SONIC_ROUTING_STACK = frr
and then build images as usual.
* Used integrated-vtysh-config in FRR
Changed to single template: frr.conf.j2 for configuration and added tests
The work on Arista 7170 was originally submitted under platform/p4.
Since the platform/barefoot was recently introduced, this is where
this platform support needs to go.
Signed-off-by: Samuel Angebault <staphylo@arista.com>
