This PR makes two changes:
- Store Jinja2 cache in LOGLEVEL DB instead of STATE DB
- Store bytecode cache encoded in base64
Tested with the following command: "redis-dump -d 3 -k JINJA2_CACHE"
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Includes the following commits:
* src/sonic-platform-common 111dcf7...b316f8d (5):
> [sonic_platform_base] fix an indentation in fan_drawer_base.py (#133)
> [SONIC_Y_CABLE] Adding new Y cable Package for accessing Y cable QSFP's eeprom and configuring Y cable's mux through eeprom (#128)
> Merge pull request #132 from vdahiya12/adding_changes_for_base_api
> [ChassisBase][ModuleBase] Remove redundant 'get_serial_number()' method (#130)
> Merge pull request #125 from vdahiya12/changes_for_mux_driver
bring up chassisdb service on sonic switch according to the design in
Distributed Forwarding in VoQ Arch HLD
Signed-off-by: Honggang Xu <hxu@arista.com>
**- Why I did it**
To bring up new ChassisDB service in sonic as designed in ['Distributed forwarding in a VOQ architecture HLD' ](90c1289eaf/doc/chassis/architecture.md).
**- How I did it**
Implement the section 2.3.1 Global DB Organization of the VOQ architecture HLD.
**- How to verify it**
ChassisDB service won't start without chassisdb.conf file on the existing platforms.
ChassisDB service is accessible with global.conf file in the distributed arichitecture.
Signed-off-by: Honggang Xu <hxu@arista.com>
6e4a796 2020-10-12 | Fix: correctly handle that lldp_loc_man_addr contains only IPv6 address without IPv4 address (#164) [Qi Luo]
0f772ce 2020-09-28 | [ciscoSwitchQosMIB]: Remove invocation of update_data function during (#161) [SuvarnaMeenakshi]
We were building our own python-click package because we needed features/bug fixes available as of version 7.0.0, but the most recent version available from Debian was in the 6.x range.
"Click" is needed for building/testing and installing sonic-utilities. Now that we are building sonic-utilities as a wheel, with Click specified as a dependency in the setup.py file, setuptools will install a more recent version of Click in the sonic-slave-buster container when building the package, and pip will install a more recent version of Click in the host OS of SONiC when installing the sonic-utilities package. Also, we don't need to worry about installing the Python 2 or 3 version of the package, as the proper one will be installed as necessary.
* Optimze ACL Table/Rule notifcation handling
to loop pop() until empty to consume all the data in a batch
This wau we prevent multiple call to iptable updates
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Address review comments
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
**- Why I did it**
FRR introduced [next hop tracking](http://docs.frrouting.org/projects/dev-guide/en/latest/next-hop-tracking.html) functionality.
That functionality requires resolving BGP neighbors before setting BGP connection (or explicit ebgp-multihop command). Sometimes (BGP MONITORS) our neighbors are not directly connected and sessions are IBGP. In this case current configuration prevents FRR to establish BGP connections. Reason would be "waiting for NHT". To fix that we need either add static routes for each not-directly connected ibgp neighbor, or enable command `ip nht resolve-via-default`
**- How I did it**
Put `ip nht resolve-via-default` into the config
**- How to verify it**
Build an image. Enable BGP_MONITOR entry and check that entry is Established or Connecting in FRR
Co-authored-by: Pavel Shirshov <pavel.contrib@gmail.com>
* system health first commit
* system health daemon first commit
* Finish healthd
* Changes due to lower layer logic change
* Get ASIC temperature from TEMPERATURE_INFO table
* Add system health make rule and service files
* fix bugs found during manual test
* Change make file to install system-health library to host
* Set system LED to blink on bootup time
* Caught exceptions in system health checker to make it more robust
* fix issue that fan/psu presence will always be true
* fix issue for external checker
* move system-health service to right after rc-local service
* Set system-health service start after database service
* Get system up time via /proc/uptime
* Provide more information in stat for CLI to use
* fix typo
* Set default category to External for external checker
* If external checker reported OK, save it to stat too
* Trim string for external checker output
* fix issue: PSU voltage check always return OK
* Add unit test cases for system health library
* Fix LGTM warnings
* fix demo comments: 1. get boot up timeout from monit configuration file; 2. set system led in library instead of daemon
* Remove boot_timeout configuration because it will get from monit config file
* Fix argument miss
* fix unit test failure
* fix issue: summary status is not correct
* Fix format issues found in code review
* rename th to threshold to make it clearer
* Fix review comment: 1. add a .dep file for system health; 2. deprecated daemon_base and uses sonic-py-common instead
* Fix unit test failure
* Fix LGTM alert
* Fix LGTM alert
* Fix review comments
* Fix review comment
* 1. Add relevant comments for system health; 2. rename external_checker to user_define_checker
* Ignore check for unknown service type
* Fix unit test issue
* Rename user define checker to user defined checker
* Rename user_define_checkers to user_defined_checkers for configuration file
* Renmae file user_define_checker.py -> user_defined_checker.py
* Fix typo
* Adjust import order for config.py
Co-authored-by: Joe LeVeque <jleveque@users.noreply.github.com>
* Adjust import order for src/system-health/health_checker/hardware_checker.py
Co-authored-by: Joe LeVeque <jleveque@users.noreply.github.com>
* Adjust import order for src/system-health/scripts/healthd
Co-authored-by: Joe LeVeque <jleveque@users.noreply.github.com>
* Adjust import orders in src/system-health/tests/test_system_health.py
* Fix typo
* Add new line after import
* If system health configuration file not exist, healthd should exit
* Fix indent and enable pytest coverage
* Fix typo
* Fix typo
* Remove global logger and use log functions inherited from super class
* Change info level logger to notice level
Co-authored-by: Joe LeVeque <jleveque@users.noreply.github.com>
* src/sonic-utilities 6e58dff...e1244a5 (5):
> [setup.py] Pin external runtime dependencies at known working versions (#1151)
> [config] Reload Monit configuration after potential hostname changes (#1132)
> [NAT]:Updated natshow script to support DNAT Pool changes (#1001)
> [pfcstat] Create new copies of Rx and Tx dictionaries (#1150)
> [master]Fix show ip interface neighbor info not correct when add second ip (#1134)
- SN3800 vs Cisco9236 - no link copper or optics - start sending IDLE before PHY_UP for specific OPNs
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
* [make reset] update submodule's remotes
This change is to address an issue where when using a long standing repo to build image, the submodule could become out-dated with their remotes so that make init is no longer to bring all submoudles to the latest. The consequence is weird build failures.
When we update/switch branch in a long standing repo, we will issue 'make reset' to get repo ready for next build. Updating all submodule's remotes during "make reset" address the issue.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
print cache status when use cached file in the build process
Without DPKG cache support :
[ building ] [ target/docker-base.gz ]
[ finished ] [ target/docker-base.gz ]
With DPKG cache support :
[ building ] [ target/docker-base.gz ]
[ cached ] [ target/docker-base.gz ]
extracted from PR 4595 by Kalimuthu Velappan
Signed-off-by: Guohan Lu <lguohan@gmail.com>
any event happening on ACL Rule Table (eg DATAACL rules
programmed) caused control plane default action to be triggered.
Now Control Plance ACTION will be trigger only
a) ACL Rule beloging to Control ACL Table
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
During platform deinitialization, dell_ich is not removed properly and when we do initialize s6100 platform, ICH driver sysfs attributes are not attached. Because of this, get_transceiver_change_event returns error and this leads xcvrd to crash.
This is to fix pcie firmware check assert in Broadcom SDK once the SAI changes merges. This will be in the future but adding the soc property in the broadcom config now.
Co-authored-by: Zhi Yuan Carl Zhao <zyzhao@arista.com>
Make Python3-swsscommon available in image.
```
admin@str-s6000-acs-13:~$ sudo apt-cache search swss
libswsscommon - This package contains Switch State Service common library.
python-swsscommon - This package contains Switch State Service common Python2 library.
python3-swsscommon- This package contains Switch State Service common Python3 library.
admin@str-s6000-acs-13:~$
```
- [acl-loader] Revert fix for IP protocol == 0 (#1142)
- Show sflow interface to display all interfaces enabled for sflow (#1143)
- [sflow_test.py]: tests for config sflow commands. (#1112)
- [config/console] Support add/del console port setting commands (#1136)
- [cli][bgp]use vtysh in the show ip bgp summary command (#1137)
- [README.md] Describe new package creation schema (#1131)
- [consutil] Remove actual baud and refactor lib for future change (#1130)
Signed-off-by: Danny Allen <daall@microsoft.com>
* Install ndppd during image build, and copy config files to image
* Configure proxy settings based on config DB at container start
* Pipe ndppd output to logger inside container to log output in syslog
To address issue #5525
Explicitly control the grub installation requirement when it is needed.
We have scenario where configuration migration happened but grub
installation is not required.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
implements a new feature: "BGP Allow list."
This feature allows us to control which IP prefixes are going to be advertised via ebgp from the routes received from EBGP neighbors.
Some platforms don't leverage the brcm led coprocessor.
However ledinit will try to load a non existing file and exit with an
error code.
This change is a cosmetic fix mostly.
- How to verify it
Boot a platform without the configuration and verify in the syslog that the exit status of ledinit is 0
Boot a platform with the configuration and verify in the syslog that the exit status of ledinit is 0 and the leds are working.
Verified by adding a dumb led_proc_init.soc on an Arista platform which usually doesn't use it.
be51ebc533cbe92a885c584b4611ffc92d10ea36 Add IPv6 key item support to request parser (#1449)
76e22516bffe45d577ab9cce4f5d96687140fe75 When teamd feature state is disabled the Netdevice created by teamd were (#1450)
6aa97ce7982b78a26803908c0ce12302e51df793 Use .clear() after std::move() (#1444)
d5757db5d896aa2405f6cbf9f4c150f46b27aa4e Add libzmq to README dependencies (#1447)
c7b262ee61973a48943603810c8246a2471d1862 Add libzmq to Makefiles (#1443)
0b2e59ab6b909e5ea06013da03215f0d1af1e618 [drop counters] Clarify log messages for initial counter setup (#1445)
003cf24353c845ef708d192b7da8d571537671e1 [dvs] Refactor and add buffer pool wm test (#1446)
2f5d2d99dfae506333bddda9de2f289f92bb889b [acl] Remove Ethertype from L3V6 qualifiers (#1433)
f7b974f7fc6474a6493a7b6d0676e17caffa6165 Fix issue: bufferorch only pass the first attribute to sai when setting attribute (#1442)
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
