Why I did it
Support pddf to as4630/as7816/as7326
How I did it
Send needed file to the PR for these platform
How to verify it
Test sensors and show platform cmd.
root@as7326-56x-3:/home/admin# show platform psustatus
PSU Model Serial HW Rev Voltage (V) Current (A) Power (W) Status LED
PSU 1 FSF045-611 FSF0451912000505 N/A 12.06 5.50 66.00 OK green
PSU 2 FSF045-611 FSF0451912000568 N/A 12.00 5.50 66.00 OK green
root@as7326-56x-3:/home/admin# sensors
lm75-i2c-15-4a
Adapter: i2c-1-mux (chan_id 6)
Main Board Temperature: +35.5 C (high = +80.0 C, hyst = +75.0 C)
lm75-i2c-15-4b
Adapter: i2c-1-mux (chan_id 6)
CPU Board Temperature: +29.0 C (high = +80.0 C, hyst = +75.0 C)
fan_ctrl-i2c-11-66
Adapter: i2c-1-mux (chan_id 2)
fan1: 9100 RPM
fan2: 9400 RPM
fan3: 9300 RPM
fan4: 9600 RPM
fan5: 9000 RPM
fan6: 9100 RPM
fan7: 9100 RPM
fan8: 9300 RPM
fan9: 9200 RPM
fan10: 9400 RPM
fan11: 9200 RPM
fan12: 9400 RPM
pch_haswell-virtual-0
Adapter: Virtual device
temp1: +43.0 C
psu_pmbus-i2c-17-59
Adapter: i2c-1-mux (chan_id 0)
in3: +12.06 V
fan1: 6272 RPM
temp1: +37.0 C
power2: 60.00 W
curr2: +6.00 A
lm75-i2c-15-49
Adapter: i2c-1-mux (chan_id 6)
Main Board Temperature: +40.0 C (high = +80.0 C, hyst = +75.0 C)
lm75-i2c-15-48
Adapter: i2c-1-mux (chan_id 6)
Main Board Temperature: +39.0 C (high = +80.0 C, hyst = +75.0 C)
psu_pmbus-i2c-13-5b
Adapter: i2c-1-mux (chan_id 4)
in3: +12.00 V
fan1: 6144 RPM
temp1: +36.0 C
power2: 66.00 W
curr2: +5.50 A
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +50.0 C (high = +82.0 C, crit = +104.0 C)
Core 0: +50.0 C (high = +82.0 C, crit = +104.0 C)
Core 1: +50.0 C (high = +82.0 C, crit = +104.0 C)
Core 2: +50.0 C (high = +82.0 C, crit = +104.0 C)
Core 3: +50.0 C (high = +82.0 C, crit = +104.0 C)
Signed-off-by: Jostar Yang <jostar_yang@accton.com.tw>
Enable pca954x idle_disconnect to avoid possible I2C device address conflict.
How I did it
Change pca954x device_attr idle_state to -2 (MUX_IDLE_DISCONNECT).
How to verify it
Cat pca954x device_attr idle_state and confirm the value is -2.
Signed-off-by: Sean Wu <sean_wu@edge-core.com>
Accton util applies lsmod to check if drivers are installed.
But lsmod may return error on startup and skip module installation.
Signed-off-by: Brandon Chuang <brandon_chuang@edge-core.com>
Fix 259 alerts reported by the LGTM tool:
- 245 for Unused import
- 7 for Testing equality to None
- 5 for Duplicate key in dict literal
- 1 for Module is imported more than once
- 1 for Unused local variable
I2c burst read may failed due to misoperation of ir3570a(A DC-to-DC converter IC).
As #2966, there are 3 more models have this symptom, as7326-56x, as7726-32x, and as9716-32d.
Also correct typo of naming on as7816-64x and as7716-32x.
Signed-off-by: roy_lee roy_lee@accton.com
What I did
Disabling i2c function of ir3570a which may failed i2c tranfer to others.
Close channel of mux after data transfered.
How I did it
Identify version of ir3570, if it's ir3570a, disable its alias i2c address.
Enable parameter of driver i2c_mux_pca954x to close channel on after every access.
How to verify it
Write 08 to offset 0xcf of systom eeprom and execute i2c block read.
It will return error.
plug-in several transceivers and run "show interfaces transceiver presence" and "sfputil show presence". You may see the different result. (But doing this requires updated xcvrd).
Signed-off-by: roy_lee <roy_lee@accton.com>
