Why I did it
8c7ddf56 - [warm/fast-reboot] Backup logs from tmpfs to disk during fast/warm shutdown ([swss]: update swss docker to stretch #2714) (3 hours ago) [Vaibhav Hemant Dixit]
f2a31b30 - [ci] Fix pipeline issue caused by sonic-slave-* change. ([201803] Modify Debian apt repos to reflect changes made by maintainers #2709) (3 hours ago) [Liu Shilong]
586ecf0e - [dhcp_relay] Fix dhcp_relay restart error while add/del vlan ([thrift] add a patch to revert THRIFT-3650 #2688) (3 hours ago) [Yaqiang Zhu]
07b0ef4c - [portstat CLI] don't print reminder if use json format ([devices] add new accton platform minipack. #2670) (3 hours ago) [wenyiz2021]
48d3d3ef - [show][muxcable] add some new commands health, reset-cause, queue_info support for muxcable (DUT takes more than 7 seconds to finish update ip v6 neighbor #2414) (3 hours ago) [vdahiya12]
How I did it
How to verify it
Why I did it
submodule advance
b085b5f - [ci] Fix pipeline error about team5 not found. (Core dump in orchagent when assigning router interface to a vlan with untagged mode #2684) (3 hours ago) [Liu Shilong]
4549b4c - Fix issue: there is no retry while creating a RIF which is in removing state ([201811 sub-module] advance sub-modules: utilities, swss, swss-common #2679) (3 hours ago) [Junchao-Mellanox]
980a45b - [FDB]Fixing FDB consolidated flush for Remote MACs (pmon to stretch #2673) (3 hours ago) [Sudharsan Dhamal Gopalarathnam]
c646607 - Do not allow to add port to .1Q bridge while router port deletion is not completed (Update SDK, FW and SAI #2669) (3 hours ago) [Lior Avramov]
4a321f0 - [orchagent]: Get bridge port ID from orchagent cache instead of SAI API ([201811 sub module] advance sairedis sub module #2657) (3 hours ago) [Lawrence Lee]
f4b88f3 - [Dual-ToR] handle 'mux_tunnel_egress_acl' attrib in order to change ACL configuration (drop on ingress/egress) on standby ToR (lm75 doesn't support written alarm to syslog. #2646) (3 hours ago) [Andriy Yurkiv]
a4f29c1 - [Workaround] EvpnRemoteVnip2pOrch warmboot check failure ([teamd]: wait for swss db flush done before starting teamd container #2626) (3 hours ago) [jcaiMR]
53ee0a8 - Support for tc-dot1p and tc-dscp qosmap ([201803] [router-advertiser] Add templated script to wait for pertinent interfaces to be ready before starting radvd #2559) (3 hours ago) [Divya Mukundan]
b953866 - [dual-tor] add missing SAI attribte in order to create IPNIP tunnel (Config reload/load_minigraph not clearing State DB #2503) (3 hours ago) [Andriy Yurkiv]
How I did it
How to verify it
#### Why I did it
Following the PR https://github.com/sonic-net/sonic-swss-common/pull/739 increasing netlink buffer size in linux kernel
As error is seen in fdbsyncd with netlink reports "out of memory on reading a netlink socket" It is seen when kernel is sending 10k remote mac to fdbsyncd.
#### How I did it
Increase the buffer size of the netlink buffer from 3MB to 16MB
#### How to verify it
Verified with 10k remote mac, and restarting the fdbsyncd process. So that kernel send the bridge fdb dump to the fdbsyncd.
Verified that the netlink buffer error is not reported in the sys log.
Why I did it
cf9a66b - Fix issue: bulk counter feature is disabled ([Broadcom]: Update Broadcom SDK/SAI package #1205) (4 hours ago) [Lior Avramov]
8b1583b - [Dual-ToR] update sai.profile with SAI_ADDITIONAL_MAC_ENABLED attribute if corresponding arg passed to syncd ([Makefile]: variable ENABLE_SYNCD_RPC is always empty string #1201) (4 hours ago) [Andriy Yurkiv]
50d8e21 - [syncd]: Enable port bulk API ([platform] Accton AS7712-32X. Update for sensors and sfputil. #1197) (4 hours ago) [Nazarii Hnydyn]
a72438a - Use new value of STATE_DB FAST_REBOOT entry ([device/accton]: Update Accton-AS5712_54X #1196) (4 hours ago) [Aryeh Feigin]
d78ce86 - validation support for SAI_ATTR_VALUE_TYPE_JSON ([installer] FIX. ONIE installer error issue: #1152) (4 hours ago) [svshah-intel]
How I did it
How to verify it
Why I did it
9ccaaa5 - Update host electrical interface for 2x100G AOC ([platform]: add dell s6100 into one image #346) (4 hours ago) [mihirpat1]
d7016a4 - [ssd_generic] Get health status from Remaining_Life_Left field for virtium SSD ([docker]: Update docker-orchagent start.sh to combine td2 qos/buffers… #344) (4 hours ago) [Junchao-Mellanox]
How I did it
How to verify it
Why I did it
6391de0 - [ycable] add changes for correcting telemetry values for 'active-active' (Add default dhcp_relay.yml file to OneImage build #341) (4 hours ago) [vdahiya12]
2cb31c4 - Update CMIS module types for 2x100G AOC support ([kernel]: update linux kernel to support z9100 #339) (4 hours ago) [mihirpat1]
2ea9cf2 - [ycabled] add more coverage to ycabled; add minor name change for vendor API CLI return key-values pairs ([Makefile]: Automatically rebuild sonic-slave #338) (4 hours ago) [vdahiya12]
How I did it
How to verify it
Why I did it
e732ed0 - Prevent sonic-db-cli generate core dump (Update submodule: sairedis #749) (4 minutes ago) [Hua Liu]
28adcb4 - Support for TC-DOT1p qos map (Update submodules: sonic-swss-common, sonic-sairedis #721) (5 minutes ago) [Divya Mukundan]
How I did it
How to verify it
Why I did it
[Build] Support to use loosen version when failed to install python packages
It is to fix the issue #14012
How I did it
Try to use the installation command without constraint
How to verify it
- Why I did it
On Mellanox platform, system EEPROM is a soft link provided by hw-management. There is chance that config-setup service accessing the EEPROM before hw-management creating it. It causes errors. The PR is aim to fix it.
- How I did it
Waiting EEPROM creation in platform API up to 10 seconds.
- How to verify it
Manual test
Why I did it
The 720DT-48S platform has variants with different chassis names, and these need to all be included in platform_components.json to ensure that sonic-mgmt platform_tests/fwutil/test_fwutil.py::test_fwutil_show passes
How I did it
Updated platform_components.json with the variant names for 720DT-48S.
How to verify it
Ran aforementioned testcase and verified that it passes on the different variants.
Go's runtime (and dockerd inherits this) uses own DNS resolver implementation by default on Linux.
It has been observed that there are some DNS resolution issues when executing ```docker pull``` after first boot.
Consider the following script:
```
admin@r-boxer-sw01:~$ while :; do date; cat /etc/resolv.conf; ping -c 1 harbor.mellanox.com; docker pull harbor.mellanox.com/sonic/cpu-report:1.0.0 ; sleep 1; done
Fri 03 Feb 2023 10:06:22 AM UTC
nameserver 10.211.0.124
nameserver 10.211.0.121
nameserver 10.7.77.135
search mtr.labs.mlnx labs.mlnx mlnx lab.mtl.com mtl.com
PING harbor.mellanox.com (10.7.1.117) 56(84) bytes of data.
64 bytes from harbor.mtl.labs.mlnx (10.7.1.117): icmp_seq=1 ttl=53 time=5.99 ms
--- harbor.mellanox.com ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 5.989/5.989/5.989/0.000 ms
Error response from daemon: Get "https://harbor.mellanox.com/v2/": dial tcp: lookup harbor.mellanox.com on [::1]:53: read udp [::1]:57245->[::1]:53: read: connection refused
Fri 03 Feb 2023 10:06:23 AM UTC
nameserver 10.211.0.124
nameserver 10.211.0.121
nameserver 10.7.77.135
search mtr.labs.mlnx labs.mlnx mlnx lab.mtl.com mtl.com
PING harbor.mellanox.com (10.7.1.117) 56(84) bytes of data.
64 bytes from harbor.mtl.labs.mlnx (10.7.1.117): icmp_seq=1 ttl=53 time=5.56 ms
--- harbor.mellanox.com ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 5.561/5.561/5.561/0.000 ms
Error response from daemon: Get "https://harbor.mellanox.com/v2/": dial tcp: lookup harbor.mellanox.com on [::1]:53: read udp [::1]:53299->[::1]:53: read: connection refused
Fri 03 Feb 2023 10:06:24 AM UTC
nameserver 10.211.0.124
nameserver 10.211.0.121
nameserver 10.7.77.135
search mtr.labs.mlnx labs.mlnx mlnx lab.mtl.com mtl.com
PING harbor.mellanox.com (10.7.1.117) 56(84) bytes of data.
64 bytes from harbor.mtl.labs.mlnx (10.7.1.117): icmp_seq=1 ttl=53 time=5.78 ms
--- harbor.mellanox.com ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 5.783/5.783/5.783/0.000 ms
Error response from daemon: Get "https://harbor.mellanox.com/v2/": dial tcp: lookup harbor.mellanox.com on [::1]:53: read udp [::1]:55765->[::1]:53: read: connection refused
Fri 03 Feb 2023 10:06:25 AM UTC
nameserver 10.211.0.124
nameserver 10.211.0.121
nameserver 10.7.77.135
search mtr.labs.mlnx labs.mlnx mlnx lab.mtl.com mtl.com
PING harbor.mellanox.com (10.7.1.117) 56(84) bytes of data.
64 bytes from harbor.mtl.labs.mlnx (10.7.1.117): icmp_seq=1 ttl=53 time=7.17 ms
--- harbor.mellanox.com ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 7.171/7.171/7.171/0.000 ms
Error response from daemon: Get "https://harbor.mellanox.com/v2/": dial tcp: lookup harbor.mellanox.com on [::1]:53: read udp [::1]:44877->[::1]:53: read: connection refused
Fri 03 Feb 2023 10:06:26 AM UTC
nameserver 10.211.0.124
nameserver 10.211.0.121
nameserver 10.7.77.135
search mtr.labs.mlnx labs.mlnx mlnx lab.mtl.com mtl.com
PING harbor.mellanox.com (10.7.1.117) 56(84) bytes of data.
64 bytes from harbor.mtl.labs.mlnx (10.7.1.117): icmp_seq=1 ttl=53 time=5.66 ms
--- harbor.mellanox.com ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 5.656/5.656/5.656/0.000 ms
Error response from daemon: Get "https://harbor.mellanox.com/v2/": dial tcp: lookup harbor.mellanox.com on [::1]:53: read udp [::1]:54604->[::1]:53: read: connection refused
Fri 03 Feb 2023 10:06:27 AM UTC
nameserver 10.211.0.124
nameserver 10.211.0.121
nameserver 10.7.77.135
search mtr.labs.mlnx labs.mlnx mlnx lab.mtl.com mtl.com
PING harbor.mellanox.com (10.7.1.117) 56(84) bytes of data.
64 bytes from harbor.mtl.labs.mlnx (10.7.1.117): icmp_seq=1 ttl=53 time=8.22 ms
--- harbor.mellanox.com ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 8.223/8.223/8.223/0.000 ms
1.0.0: Pulling from sonic/cpu-report
004f1eed87df: Downloading [===================> ] 19.3MB/50.43MB
5d6f1e8117db: Download complete
48c2faf66abe: Download complete
234b70d0479d: Downloading [=========> ] 9.363MB/51.84MB
6fa07a00e2f0: Downloading [==> ] 9.51MB/192.4MB
04a31b4508b8: Waiting
e11ae5168189: Waiting
8861a99744cb: Waiting
d59580d95305: Waiting
12b1523494c1: Waiting
d1a4b09e9dbc: Waiting
99f41c3f014f: Waiting
```
While /etc/resolv.conf has the correct content and ping (and any other utility that uses libc's DNS resolution implementation) works correctly
docker is unable to resolve the hostname and falls back to default [::1]:53. This started to happen after PR https://github.com/sonic-net/sonic-buildimage/pull/13516 has been merged.
As you can see from the log, dockerd is able to pick up the correct /etc/resolv.conf only after 5 sec since first try. This seems to be somehow related to the logic in Go's DNS resolver
https://github.com/golang/go/blob/master/src/net/dnsclient_unix.go#L385.
There have been issues like that reported in docker like:
- https://github.com/docker/cli/issues/2299
- https://github.com/docker/cli/issues/2618
- https://github.com/moby/moby/issues/22398
Since this starts to happen after inclusion of resolvconf package by
above mentioned PR and the fact I can't see any problem with that (ping,
nslookup, etc. works) the choice is made to force dockerd to use cgo
(libc) resolver.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
The lsof and sysstat packages make determining what files/sockets a
program has open a bit easier. This helps if, for example, some
application has a file open that's been deleted from disk.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
Command "sudo sfputil show error-status -hw" shows "OK (Not implemented)" in the output.
How I did it
Add a new SFP API get_error_description support in Nokia sonic-platform sfp.py module.
How to verify it
Run the new image and execute command "sudo sfputil show error-status -hw"
previously "make reset" was expecting user input from the terminal to do its job
setting UNATTENDED to any non-zero string will allow "make reset" to run without interactive confirmation
- Why I did it
This is the backport to 202211 from master (see PR #12207)
When doing automated builds of SONiC images, we need to reset the working repositories between each build.
- How I did it
Adding an environment variable that is read by Makefile.work
- How to verify it
running
UNATTENDED=1 make reset
should make an automatic reset of all working directories
Why I did it
Support to upgrade packages, do better cleanup after the build.
How I did it
Remove the no use preference version control file after the build.
How to verify it
Why I did it
Docker build has a low rate of hanging up.
It hangs on different steps. So, it looks like a bug in docker daemon.
How I did it
Start a daemon process to scan running time more than 1 hours, and kill the process.
How to verify it
- Why I did it
Advance hw-mgmt service to V.7.0020.4100
Add missing thermal sensors that are supported by hw-mgmt package
Delay system health service before hw-mgmt has started on Mellanox platform in order to avoid reading some sensors before ready.
Depends on sonic-net/sonic-linux-kernel#305
- How I did it
1. Update hw mgmt version
2. Add missing sensors
3. Delay service
- How to verify it
Regression test.
Signed-off-by: Stephen Sun <stephens@nvidia.com>
- Why I did it
Support per PSU slope value for PSU power threshold according to hardware team requirement
- How I did it
Pass the PSU number as a parameter when fetching the slope value of PSU.
- How to verify it
Running regression and manual test
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Why I did it
By specifying 'status_led' 'controllable' to false for psu section, it means the platform is not yet supporting psu status led
How I did it
specify 'status_led' 'controllable' to false for psu section
How to verify it
by running test in pdb, manually add {'status_led' : {'controllable' : False}} in dictionary
this flag will be able to get False and skip testing:
ce290c735d/tests/platform_tests/api/test_psu.py (L337)
- Why I did it
Added platform specific script to be invoked during SAI failure dump. Added some generic changes to mount /var/log/sai_failure_dump as read write in the syncd docker
- How I did it
Added script in docker-syncd of mellanox and copied it to /usr/bin
- How to verify it
Manual UT and new sonic-mgmt tests
Why I did it
Fix some unreliability seen on emmc device with some AMD CPUs
How I did it
Added a kernel parameter to add quirks to
It depends on a sonic-linux-kernel change to work properly but will be a no-op without it.
The quirk added is SDHCI_QUIRK2_BROKEN_HS200 used to downgrade the link speed for the eMMC.
Why I did it
On a supervisor card in a chassis, syncd/teamd/swss/lldp etc dockers are created for each Switch Fabric card. However, not all chassis would have all the switch fabric cards present. In this case, only dockers for Switch Fabrics present would be created.
system-health indicates errors in this scenario as it is expecting dockers for all Switch Fabrics (based on NUM_ASIC defined in asic.conf file).
system-health process error messages were also altered to indicate which container had the issue; multiple containers may run processes with the same name, which can result in identical system-health error messages, causing ambiguity.
How I did it
Port container_checker logic from #11442 into service_checker for system-health.
How to verify it
Bringup Supervisor card with one or more missing fabric cards. Execute 'show system-health summary'. The command should not report failure due to missing dockers for the asics on the fabric cards which are not present.
Why I did it
To address error sometimes seen when running sonic-mgmt test_stress_routes.py::test_announce_withdraw_route on 720DT-48S
How I did it
Update boot0 logic to set platform specific varlog size for 720DT-48S
How to verify it
Verified that /var/log size increased and error is no longer observed when running test
Why I did it
1. fix chassis test_set_fans_led case
2. fix chassis get_name case mismatch issue
3. fix fan_drawer test_set_fans_speed
4. fix component test_components test case
How I did it
Add corresponding configuration into chassis json file
How to verify it
Run platform tests cases to verify these failure cases
- Why I did it
In to-sonic and multi-asic KVM-test, pretest sometimes failed. Reason is rsyslogd process can not start in teamd container. Because rsyslog.conf is empty caused by sonic-cfggen execute failed
- How I did it
If sonic-cfggen -d execute failed, execute without -d because the template file has the default value.
- How to verify it
Build image and test it over 40 times, all passed pretest.
Signed-off-by: Chun'ang Li <chunangli@microsoft.com>
add SEU reporting on chassis
fix fallback logic for Clearlake eeprom identification
fix fan speed reporting for a specific model
move pcie timeout configuration for Upperlake in platform code (deprecates hwsku-init)
