Commit Graph

367 Commits

Author SHA1 Message Date
Wei Bai
43de8368f5 [docker-frr]: Enable FPM (#2464)
[docker-frr]: Enable FPM
2019-01-18 01:47:15 -08:00
Stegen Smith
53685df949 [docker-frr]: updated daemons for frr 6.0.2 (#2461)
Signed-off-by: Stegen Smith <stegen@owns.com>
2019-01-18 00:03:23 -08:00
Nikos
4ed5cb4ef1 [docker-frr]: Move FRR from 4.0 to 6.0.2 and make the new frr version and debian package compile (#2454)
Signed-off-by: nikos <ntriantafillis@gmail.com>
2019-01-16 18:34:41 -08:00
Kevin(Shengkai) Wang
b3abf9af7f [docker-platform-monitor] add psud daemon to Pmon (#2423)
* Add psud daemon to pmon container
* Update submodule sonic-platform-daemons

Submodule update sonic-platform-daemons:

e5d8155 - [sonic-psud] add a new daemon sonic-psud to platform monitor (#20)

Signed-off-by: Kevin Wang <kevinw@mellanox.com>
2019-01-15 21:24:47 -08:00
Joe LeVeque
3c67c70c34 [lldp] For MGMT port, if port alias is available, use it for Port ID subtype; otherwise use port name (#2445) 2019-01-15 11:27:46 -08:00
Marian Pritsak
178764e3fa
[swss][supervisord.conf] Remove intfsyncd 2019-01-13 16:04:39 +02:00
Joe LeVeque
46fd322877 [docker-database] Add missing '%' in '%syslogtag%' (#2434) 2019-01-11 17:46:32 -08:00
Ying Xie
d9c076dada [quagga bgp] set quagga graceful restart timeout to 180 seconds (#2362)
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
2018-12-08 11:38:31 -08:00
Prince Sunny
43f6df4654 Add nbrmgr to supervisor control (#2265)
* Add nbrmgr to supervisord conf

* Corrected priority values [Fix typo]

* Submodule update for Neighbor manager daemon

Submodule update sonic-swss-common:

edbfeec - Remove default docker name value of swss. (#250)
9728462 - Corrected configDB name for neigh table (#251)
6decc65 - Add NEIGH_TABLE to configDB for neighbor configuration (#249)
9918ae6 - Add ProducerStateTable temp view implementation and UT (#247)
41408f2 - Update README on dependencies
d9c0ba4 -Update README on the section 'Build with Google Test'
bb7fa5b - [ut]: explicit convert is to bool type (#248)
661b82c - Add gtest instruction in README

Submodule update sonic-swss

705b092 - Support ConfigDB neighbor configuration, introduce nbrmgr daemon (#693)
8522390 - Add vxlan switch attributes to switch orch (#712)
b123fa0 - [schema] update WARM_RESTART_TABLE:process_name schema document (#707)
2d7ab0c - Revert "Align default MTU value as SAI default (#705)" (#710)
836a58c - Align default MTU value as SAI default (#705)
bffa01f - VNET/VXLAN changes (#643)
b750a4b - [watermarkorch] add watermarkorch, extend queue and pg counters with wat\u2026 (#629)
2018-11-28 21:58:59 -08:00
Shuotian Cheng
6ddf3cdda0 [orchagent]: Fix typo (#2317)
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
2018-11-28 21:37:52 -08:00
Prince Sunny
df2f3f722d Provide asic_type to switch template (#2308) 2018-11-27 22:02:30 -08:00
lguohan
03e0efa704
[vs]: only send lldp over eth0 (management port) (#2309)
In vs platform, eth[n] where n > 0 is physical port,
we should not send lldp over those ports

Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-11-27 22:02:06 -08:00
Rodny Molina
196d9f5f8a [quagga]: Adjusting bgp jinja template and quagga's supervisord (#2291)
There are two minor changes in this PR:

* Adjust quagga's jinja template to enable bgp-gr functionality by default. Currently is only applicable to those devices tagged as TOR/T0.

* Ensure that no bgp-notification is sent out to remote-peers during bgpd shutdown events. The goal here is to make sure that remote-peers kick off bgp-gr-helper logic (i.e. retain restarting-router state), which can be only achieved if an ungraceful-shutdown (tcp pipe/socket down) is perceived. There are other approaches to accomplish this goal, such as draft-ietf-idr-bgp-gr-notification, but this one hasn't been implemented yet by Quagga/FRR.

Signed-off-by: Rodny Molina <rmolina@linkedin.com>
2018-11-27 00:39:38 -08:00
Nikos
7056b49af7 Routing application split config support (#2286)
* Routing application split config support

Signed-off-by: nikos <ntriantafillis@gmail.com>

* Routing application split config support
Routing application split config support

Signed-off-by: nikos <Nikos Triantafillis>
2018-11-26 18:19:12 -08:00
Qi Luo
c2ae736f2e [warmboot] Load database from redis-cli save (#2287)
* [warmboot] Load database from `redis-cli save`

Signed-off-by: Qi Luo <qiluo-msft@users.noreply.github.com>

* Add trivial statement to make bash function valid

Signed-off-by: Qi Luo <qiluo-msft@users.noreply.github.com>

* Update submodule sonic-utilities: Use 'redis-cli save' to dump database to file

Signed-off-by: Qi Luo <qiluo-msft@users.noreply.github.com>

* Move configdb-load.sh outside docker, and only run in cold

Signed-off-by: Qi Luo <qiluo-msft@users.noreply.github.com>

* Fix for more strict warm check

Signed-off-by: Qi Luo <qiluo-msft@users.noreply.github.com>
2018-11-22 15:13:35 -08:00
lguohan
64a2b1ce99
[vs]: build sonic vs kvm image (#2269)
Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-11-20 22:32:40 -08:00
lguohan
9f6f3e4046
[docker-saiserver]: build docker-saiserver (#2244)
* build docker-saiserver

Signed-off-by: Guohan Lu <gulv@microsoft.com>

* add docker saiserver mlnx/bfn/cavm

* set nephos to 1.3.5

Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-11-14 01:15:31 -08:00
zhenggen-xu
51a76614a3 Restore neighbor table to kernel during system warm-reboot (#2213)
* Restore neighbor table to kernel during system warm-reboot

Added a service: "restore_neighbors" to restore neighbor table into
kernel during system warm reboot. The service is started by supervisord
in swss docker when the docker is started.

In case system warm reboot is enabled, it will try to restore the neighbor
table from appDB into kernel through netlink API calls and update the neighbor
table by sending arp/ns requests to all neighbor entries, then it sets the
stateDB flag for neighsyncd to continue the reconciliation process.

-- Added tcpdump python-scapy debian package into orchagent and vs dockers.
-- Added python module: pyroute2 netifaces into orchagent and vc dockers.
-- Workarounded tcpdump issue in the vs docker

Signed-off-by: Zhenggen Xu <zxu@linkedin.com>

* Move the restore_neighbors.py to sonic-swss submodule
Made changes to makefiles accordingly

Make dockerfile.j2 changes and supervisord config changes

Add python monotonic lib for time access

Signed-off-by: Zhenggen Xu <zxu@linkedin.com>

* Added PYTHON_SWSSCOMMON as swss runtime dependency

Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
2018-11-09 17:06:09 -08:00
pavel-shirshov
61fe8fd2b5
Add /host filesystem into teamd docker (#2235) 2018-11-09 16:14:03 -08:00
stepanblyschak
f4cf54fe4f [ipinip] Fix ipinip.json.j2 for mlnx platform (#2210)
Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2018-10-30 11:02:06 -07:00
Joe LeVeque
1e1add90f9
Remove Arista-specific service ACL solution; All platforms now use caclmgrd (#2202) 2018-10-29 10:25:18 -07:00
Taoyu Li
6a37365d93 [zebra.conf] Avoid zebra crash upon empty configuration (#2203) 2018-10-28 22:32:31 -07:00
Prince Sunny
b954fa9c13 [ipdecap]: Setup decap destination IP based on platform (#2191) 2018-10-25 13:13:26 -07:00
Qi Luo
709cd5a9f5
Set swssconfig.sh startsecs=0 for quick exit (#2181)
The default startsecs is 1 second. However, swssconfig.sh will quickly
exit with expected exit code 0 during warm starting. This case should
not be treated as a failure
2018-10-22 23:40:24 -07:00
Shuotian Cheng
7313e7d9bc [teamd]: Add teammgrd in docker-teamd (#2064)
Remove the teamd.j2 templates used for starting the teamd. Add
teammgrd instead to manage all port channel related configuration
changes. Remove front panel port related configurations in
interfaces.j2 templates as well.

Remove teamd.sh script and use teammgrd to start all the teamd
processes. Remove all the logics in the start.sh script as well.

Update the sonic-swss submodule.

Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
2018-10-19 03:41:53 -07:00
pavel-shirshov
3e1b9e17b4 [teamd] Force team device recreation in case it already exists (#2168)
* Force team device recreation in case it already exists
2018-10-18 15:22:26 -07:00
Prince Sunny
4a22de42c6 Encap src_ip is not required for the IPinIP decap tunnels (#2162)
* Encap src_ip is not required for the IPinIP decap tunnels

* Removed unused variables
2018-10-17 18:31:19 -07:00
stepanblyschak
7757bc2ddf [docker-snmp]: Remove alias_map json since it is not needed anymore (#2159)
Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2018-10-16 09:33:58 -07:00
Taoyu Li
36ca171c6e
[ipinip config] Add v6 ip and peering ip besides currect v4 loopback (#2145)
[ipinip config] Add v6 ip and peering ip besides currect v4 loopback
2018-10-15 13:00:57 -07:00
lguohan
d3a9eed21e
[docker-sonic-mgmt]: fix azure kusto library version to 0.0.13 (#2138)
Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-10-11 16:36:00 -07:00
zhenggen-xu
673bb6580e [sonic-frr]: FRR 4.0 integration with SONiC (#2099)
* FRR 4.0 integration with SONiC

-- Uses SONiC FRR repo frr/4.0 (which has SONiC support) to build image
-- Makefile changes to make frr4.0 builtable.
-- Updated/Added FRR configuration files
-- bgpd jinja template fixes

To build SONiC images with FRR4.0, simply edit rules/config file and change
routing stack to following:

SONIC_ROUTING_STACK = frr

and then build images as usual.

* Used integrated-vtysh-config in FRR
Changed to single template: frr.conf.j2 for configuration and added tests
2018-10-02 10:24:59 -07:00
Jipan Yang
dedd5624a0 Adapt to the new WARM_RESTART_TABLE table schema: change from restart… (#2083)
* Adapt to the new WARM_RESTART_TABLE table schema: change from restart_count to restore_count

Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>

* Update variable and function name to match restore_count name change

Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>

* Update swss submodule for warm restart schema change

Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
2018-10-02 06:08:26 -07:00
Ying Xie
542b4332c8 [hwsku-init] Introduce mechanism to run HWSKU specific initialization code (#2072)
When there is HWSKU specific initialization needs to be performed, please
add hwsku-init script under device folder, it will be invoked by swss
before any subsequent initializations.

Signed-off-by: Ying Xie <ying.xie@microsoft.com>
2018-09-25 10:07:32 +00:00
Marian Pritsak
8a5e6ac47d [docker-orchagent]: Add vrfmgrd to supervisorctl (#2055)
* [docker-orchagent]: Add vrfmgrd to supervisorctl

Signed-off-by: Marian Pritsak <marianp@mellanox.com>

* [sonic-vs]: Add vrfmgrd to supervisorctl

Signed-off-by: Marian Pritsak <marianp@mellanox.com>
2018-09-19 22:18:39 -07:00
Marian Pritsak
51a8d8ecfa [docker-orchagent]: Upgrade iproute2 to v4.9 (#2052)
Signed-off-by: Marian Pritsak <marianp@mellanox.com>
2018-09-16 17:10:03 -07:00
Jipan Yang
3f049d33bf Warm reboot: Don't load json conifg like copp, ininip, ports and switch again upon… (#1939)
* Don't load json conifg like copp, ininip, ports and switch again upon swss warm start

Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>

* double check DB data exists in case only swss warm restart is configured at system reboot

Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>

* Double check existence of db data before skipping json load, and format update

Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
2018-09-07 12:25:38 -07:00
Shuotian Cheng
9413fa9a7b
[interfaces]: Move IP/MTU information from interfaces file into database (#1908)
- Move front panel ports and port channels MTU and IP configurations out of
the current /etc/network/interfaces file and store them in the configuration
database.

- The default MTU value for both front panel ports and the port channels is
9100. They are set via the minigraph or 9100 by default.

- Introduce portmgrd which will pick up the MTU configurations from the
configuration database.

- The updated intfmgrd will pick up IP address changes from the configuration
database.

- Update sonic-swss submodule

Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
2018-08-20 11:19:16 -07:00
lguohan
0cd4ef0c85
[socat]: build socat with readline (#1919)
support readline in bcmsh

Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-08-13 01:12:58 -07:00
lguohan
f3ca7c422f
[rsyslog]: use # to separate container name and program name in syslog message (#1918)
Previously use / to separate container name and program name.

However, in rsyslogd:

Precisely, the programname is terminated by either (whichever occurs first):

end of tag
nonprintable character
‘:’
‘[‘
‘/’
The above definition has been taken from the FreeBSD syslogd sources.

Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-08-12 22:23:58 -07:00
yangbashuang
eefd3f4ddb [platform]: update centec platform drivers and sai (#1702) 2018-08-12 17:22:08 -07:00
zhenggen-xu
d761630f73 Fix potential blackholing/looping traffic when link-local was used and refresh ipv6 neighbor to avoid CPU hit (#1904)
* Fix potential blackholing/looping traffic and refresh ipv6 neighbor to avoid CPU hit

In case ipv6 global addresses were configured on L3 interfaces and used for peering,
and routing protocol was using link-local addresses on the same interfaces as prefered nexthops,
the link-local addresses could be aged out after a while due to no activities towards the link-local
addresses themselves. And when we receive new routes with the link-local nexthops, SONiC won't insert
them to the HW, and thus cause looping or blackholing traffic.

Global ipv6 addresses on L3 interfaces between switches are refreshed by BGP keeplive and other messages.

On server facing side, traffic may hit fowarding plane only, and no refresh for the ipv6 neighbor entries regularly.
This could age-out the linux kernel ipv6 neighbor entries, and HW neighbor table entries could be removed,
and thus traffic going to those neighbors would hit CPU, and cause traffic drop and temperary CPU high load.

Also, if link-local addresses were not learned, we may not get them at all later.

It is intended to fix all above issues.

Changes:
Add ndisc6 package in swss docker and use it for ipv6 ndp ping to update the neighbors' state on Vlan interfaces
Change the default ipv6 neighbor reachable timer to 30mins
Add periodical ipv6 multicast ping to ff02::11 to get/refresh link-local neighbor info.

* Fix review comments:
Add PORTCHANNEL_INTERFACE interface for ipv6 multicast ping
format issue

* Combine regular L3 interface and portchannel interface for looping

* Add ndisc6 package to vs docker
2018-08-12 03:14:55 -07:00
paavaanan
ecfca8bf23 [devices]: DellEMC new platform support for z9264f - 64x100 (#26)
* Added new platform support DellEMC - Z92264f - 64x100

* Includes changes with Makefiles, sfputil, eeprom and default minigraph

* Led support for Z9264f platform

* Includes changes on default minigraph

* ipmitool implementation in pmon docker. platform_sensors script is inclued in pmon startup
2018-08-11 09:09:03 +00:00
Joe LeVeque
7aefa185d4 Download newer version (8.23.0-2) of rsyslog from jessie-backports in hopes of eliminating memory leaks (#1912) 2018-08-09 23:56:41 -07:00
Qi Luo
4d784d82ce
Upgrade azure-keyvault to known compatible version (#1906)
* Upgrade azure-keyvault to known compatible version
* (fix typo)
2018-08-08 18:29:17 -07:00
Kebo Liu
38beca654c [docker-platform-monitor] make file and supervisord conf change for new xcvrd deamon (#1840)
* [docker-platform-monitor] make file and supervisord conf change for new xcvrd deamon

* make file change for the new daemon
* supervisord conf change for the new daemon

signed-off-by Liu Kebo kebol@mellanox.com

* make xcvrd start sequence aligned with the supervisord conf

* update submodules to include xcvrd modification
2018-08-03 16:33:56 -07:00
pavel-shirshov
10b4bbcae8 [swss]: Start counter from swss container (#1875)
* sonic-quagga update. Don't spam with 'Vtysh connected from' message

* Enable counters inside swss container. systemd is not flexible enough to follow our business rules
2018-07-26 13:39:08 -07:00
Sagar Balani
93905d3d82 [barefoot]: Support for platforms based on Barefoot Networks' device (#1796)
* Initial commit

* Add Ingrasys S9180-32X platform dirver.

Signed-off-by: Wade He <chihen.he@gmail.com>

* Add bfn.service for init barefoot.

Signed-off-by: Wade He <chihen.he@gmail.com>

* [Barefoot Beta] Add some functions and fixed some bugs.

1. Update sensors.conf.
2. Fixed IO expander init.
3. Fixed PSU EEPROM.
4. Fixed MB EEPROM.
5. Add fancontrol and fan init.
6. Add SYS LED control (sys, fan, fan tray).
7. 2.5V compute and setup max and min.
8. Fixed typo MB eeprom delete address.
9. Remove coretemp to BMC.
10. Add active CPLD.
11. Modify SFP+ GPIO slave address.
12. Modify tmp75 Near Port 32 slave address.

Signed-off-by: Wade He <chihen.he@gmail.com>

* Add bfn script in /etc/init.d/

Signed-off-by: Wade He <chihen.he@gmail.com>

* Add bfn service in debian

Signed-off-by: Wade He <chihen.he@gmail.com>

* Fixed CPLD switch LED behavior.

Signed-off-by: Wade He <chihen.he@gmail.com>

* [Barefoot Beta] Fixed sensors and hwmon order.
1. Fixed ignore sensors Vbat.
2. Reorg hwmon order.

Signed-off-by: Wade He <chihen.he@gmail.com>

* Fixed PSU1 and PSU2 EEPROM order.

Signed-off-by: Wade He <chihen.he@gmail.com>

* initial barefoot checkin october 2017

* update refpoint

* update refpoints

* update refpoints to bf-master

* update refpoint

* update refpoint to tested version

* change to platform from asic

* update refpoint for swss

* revert core creation setting

* update refpoints

* add telnet for debug shell

* update refpoints 11/17/17

* missed change in file on previous merge

* [CPLD] Fixed blink LED issue.

* Fixed blink LED mask set error.

Signed-off-by: Wade He <chihen.he@gmail.com>

* Update bf_kdrv.c for 6.0.2.39

* Update bf kernel driver

* Add bf_fun kernel module.

* Update bf_tun for fixed build error

* merge with Azure master (12/12/17)

* update swss refpoint

* update refpoint of swss

* library dependency for stack unroll

* update refpoint to bf-master

* [DHCP relay]: Fix circuit ID and remote ID bugs (#1248)

* [DHCP relay]: Fix circuit ID and remote ID bugs

* Set circuit_id_len after setting circuit_id_len to ip->name

* [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272)

* Add I2C CPLD kernel module for psuutil.
 * Support psuutil script.
 * Add voltage min and max threshold.
 * Update sensors.conf for tmp75.

Signed-off-by: Wade He <chihen.he@gmail.com>

* Allow multi platform support - infra (more changes to follow)

* update relative path to include platform for clarity

* [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274)

- What I did
Add switch ASIC vendor: Nephos
Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X

- How I did it
Add platform/nephos files
Add platform/nephos/sonic-platform-modules-ingrasys submodule
Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files
Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files
Add SONiC to support Nephos platform
Update Head of submodule src/sonic-sairedis to "3b817bb"

- How to verify it
To build SONiC installer image and docker images, run the following commands:

make configure PLATFORM=nephos
make target/sonic-nephos.bin
Check system and network feature is worked as well

- Description for the changelog
Add switch ASIC vendor and platforms for Nephos

- A picture of a cute animal (not mandatory but encouraged)

Signed-off-by: Sam Yang <yang.kaiyu@gmail.com>

* change source of files to github (from dropbox), update sairedis refpoint

* update refpoint of sairedis

* [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board   (#1269)

* [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287)

* update sairedis (fast-boot refpoint)

* fix syncd rpc make files

* update refpoint to handle Makefile change (no functional change)

* [Marvell]: Add support for SLM5401-54x device (#1307)

* Marvell's updates for SONiC.201712 & SAI v1.0
* [Platform] Add Marvell's SLM5401-54x for branch 201712

* [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321)

- update Arista 7050-QX32S config.bcm file
- update Accton th-as771*-32x100G.config.bcm files

* update refpoint for Makefile chnage in sairedis

* update refpoint - sairedis

* update sairedis to older refpoint till we debug clean build

* export asic platform for build

* update refpoint for makefiles

* [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332)

* Upload wnc-osw1800

* Modify for Barefoot suggest

* Revert bfn-platform.mk

* Update bfn-platform-wnc.mk

Update parameter name

* Update parameter name

* initial support for WNC platform

* change switch name to "switch"

* Delete bf modules for rel_7_0

* Add Ingrasys S9180 platform

Signed-off-by: Wade He <chihen.he@gmail.com>

* Modify bfnsdk for Ingrasys S9180 platform

Signed-off-by: Wade He <chihen.he@gmail.com>

* Resolved the conflict.

* Resolved the conflict.

* Update submodule path and url.

* Delete unused file.

* Update PSU GPIO and EEPROM for psuutil.

* Add psuutil in S9180-32X

Signed-off-by: Wade He <chihen.he@gmail.com>

* update refpoint

* update refpoint

* change contact email, update refpoint

* cleanup and update kernel modules

* updates based on review

* update refpoint

* update refpoint

* fix typo in config script to check for platforms

* remove stale file

* resolve conflicts

* cleanup diffs with Azure repo and update SDK debs

* update refpoints to Azure

* address review comments

* revert refpoint of swss-common

* porting the build fix from master

* porting build fix from master

* Minor Fix

* Minor fix

* Temp to sde deb packages url

* Update sonic - sairedis,swss & swss-common refpoints

* Update git modules url path to bfn repo

* updated paths for swss, swss-common & sairedis

* Update refpoint for sonic-swss to local bfn repo

* Update URL for downloading sde debian packages

* porting fix links of debian git server from master

* porting fix links of debian git server from master

* [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC

* Update ref points for swss, swss-common and sairedis repos

* Add sonic platform scripts for bfn montara/maverick

* Call sh scripts instead of calling py scripts

* Address upstream PR Comments (#10)

* Update bf-master with azure/master
* Undo changes to some files

* Revert "Address upstream PR Comments (#10)"

This reverts commit a7fddb83ca.

* Address upstream comments (#11)

* Remove all non bfn specific changes from upstream PR

* Revert "Address upstream comments (#11)"

This reverts commit 559132103e.

* Undo non bfn changes

* Little more cleanup

* Add back code removed in merge

* export CONFIGURED_PLATFORM

* Update sairedis and swss refpoints

* Address Upstream PR comment

* change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64

* Set default tx queue len for usb0 interface to 64

* Update sairedis refpoint

* Update swss ref point

* Add bfn buffer cfg files for montara/maverick as per new design

* Update buffer cfg templates for bfn montara

* add non zero size to buffer profile
* add macro to generate port lists

* Update buffer cfg templates for bfn mavericks

* add non zero size for buffer profiles
* add port generation macro

* Add missing psmisc package

* BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions.
Adding psmisc to resolve this issue.

* Update swss ref point

* Update swss ref point

* Update sairedis refpoint

* Update sairedis refpoint

* Update sairedis refpoint

* Update sairedis refpoint

* Update refpoint for sairedis and swss

* sairedis to azure master
* swss to latest bfn bf-master

* Update gitmodules

Update url for sairedis to azure master

* Correct typo in bfn platform script

* Update swss and sairedis ref points

* Update swss ref point

* Address Review comments

* Update swws path in gitmodules to azure master
* update swss refpoint
* update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR)

* Fix sairedis refpoint broken in by previous merge

* Remove psmisc from docker base image

* This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session.
Will fix this in a seperate PR. Need this for SONIC upstreaming

* Address upstream comments

* Remove bmc interface from interface jinja template and sample output interfaces file
* Add bmc interface at boot time to network interfaces for bfn bmc based platforms

* Remove autogen ingrasys debian files

* Revert "Remove autogen ingrasys debian files"

* Buffer and qos config template fix for bfn platforms (#21)

SWI-1509 Buffer and qos config template fix for bfn platforms

* Fix qos config files for montara & mavericks (#22)

* Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs

* Fix vs test (#23)
2018-07-24 10:23:12 -07:00
Andriy Moroz
dadc17d9e6 [Mellanox] Use MAC from EEPROM for PortChannels and VLAN Interfaces (#1793)
* Use MAC from EEPROM for PortChannels

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Use MAC from EEPROM in DEVICE_METADATA

Will affect MAC for VLAN interfaces

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Get MAC via decode-syseeprom

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* hw-management is now a service

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Add error handling for MAC fetch process

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>
2018-07-23 15:51:03 -07:00
pavel-shirshov
c52fb762dd
Convert arp_update into a 'start-it-once' mode (#1864)
* Run arp_update just once, don't restart it. It will run continuosly with 5 min pauses
2018-07-18 13:04:57 -07:00
Qi Luo
5ad7d24d16
[mgmt] Fix pycparser installation (#1820) 2018-06-29 08:39:12 -07:00