include sairedis changes
3a960be | [submodule][SAI]ADvance SAI Header (#1206)
7026441 | [Mellanox] Enable DSCP remapping by using SAI attribute (#1188)
a2c37b8 | [syncd]: Enable port bulk API (#1197)
include SAI changes
7710e24 | [cherry-pick][202211]Enhance the check enum lock script (#1741) (#1742)
0031470 | improve enum values integration check (#1727) (#1737)
4f11c7e | Enable github code scanning to replace LGTM. (#1709)
0fd23d2 | [SAI-PTF] Skip test when hit expected error from sai api (#1699)
aba7612 | [SAI-PTF] API Logger - reformat arg values (#1696)
1390cee | [SAI-PTF] API Logger - reformat dict in return value (#1690)
3d96a1d | [SAI-PTF]Add return value in the SAI-PTF log (#1685)
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
Why I did it
On a supervisor card in a chassis, syncd/teamd/swss/lldp etc dockers are created for each Switch Fabric card. However, not all chassis would have all the switch fabric cards present. In this case, only dockers for Switch Fabrics present would be created.
system-health indicates errors in this scenario as it is expecting dockers for all Switch Fabrics (based on NUM_ASIC defined in asic.conf file).
system-health process error messages were also altered to indicate which container had the issue; multiple containers may run processes with the same name, which can result in identical system-health error messages, causing ambiguity.
How I did it
Port container_checker logic from #11442 into service_checker for system-health.
How to verify it
Bringup Supervisor card with one or more missing fabric cards. Execute 'show system-health summary'. The command should not report failure due to missing dockers for the asics on the fabric cards which are not present.
Signed-off-by: Zhixin Zhu zhixzhu@cisco.com
Why I did it
backplane ports cable length need to be specified.
How I did it
separated handling for the specific port name.
9126e7f8 Stepan Blyshchak Thu Feb 9 05:20:11 2023 +0200 [config/show] Add command to control pending FIB suppression (sonic-net/sonic-utilities#2495)
9e32962c mihirpat1 Wed Feb 8 16:39:00 2023 -0800 Add transceiver info CLI support to show output from TRANSCEIVER_INFO for ZR (sonic-net/sonic-utilities#2630)
Signed-off-by: Mihir Patel <patelmi@microsoft.com>
- Why I did it
Fix issue: ERR healthd: Get unit status determine-reboot-cause-'LoadState'. The error log is only seen on shutdown flow such as fast-reboot/warm-reboot.
In shutdown flow, 'LoadState' might not be available in systemctl status output, using [] might cause a KeyError.
- How I did it
Use dict.get instead of []
- How to verify it
Manual test
- Why I did it
Support DSCP remapping in dual ToR topo on T0 switch for SKU Mellanox-SN4600c-C64, Mellanox-SN4600c-D48C40, Mellanox-SN2700, Mellanox-SN2700-D48C8.
- How I did it
Regarding buffer settings, originally, there are two lossless PGs and queues 3, 4. In dual ToR scenario, the lossless traffic from the leaf switch to the uplink of the ToR switch can be bounced back.
To avoid PFC deadlock, we need to map the bounce-back lossless traffic to different PGs and queues. Therefore, 2 additional lossless PGs and queues are allocated on uplink ports on ToR switches.
On uplink ports, map DSCP 2/6 to TC 2/6 respectively
On downlink ports, both DSCP 2/6 are still mapped to TC 1
Buffer adjusted according to the ports information:
Mellanox-SN4600c-C64:
56 downlinks 50G + 8 uplinks 100G
Mellanox-SN4600c-D48C40, Mellanox-SN2700, Mellanox-SN2700-D48C8:
24 downlinks 50G + 8 uplinks 100G
- How to verify it
Unit test.
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Why I did it
dplane_fpm_nl is a new FPM implementation in FRR. The old plugin fpm will not have any new features implemented. Usage of the new plugin gives us ability to use BGP suppression feature and next hop groups in the future.
How I did it
Switch to dplane_fpm_nl zebra plugin from old fpm plugin which is not supported anymore
Remove stale patches for old fpm plugin and add similar patches for dplane_fpm_nl
How to verify it
Build and run on the switch.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
- Why I did it
Added YANG model as part of Generic Hash feature development
- How I did it
Added YANG model and UTs
- How to verify it
make configure PLATFORM=mellanox
make target/sonic-mellanox.bin
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
Update sonic-sairedis submodule pointer to include the following:
* 0434b62 [sai_failure_dump]Invoking dump during SAI failure ([#1198](https://github.com/Azure/sonic-sairedis/pull/1198))
Signed-off-by: dgsudharsan <sudharsand@nvidia.com>
Add YANG model for SYSTEM_PORT.
Resolves https://github.com/sonic-net/sonic-buildimage/issues/12458
#### Why I did it
YANG model for SYSTEM_PORT in CONFIG_DB was missing.
#### How I did it
Added new YANG model and associated unit tests.
#### How to verify it
Passing unit tests
* Add support for platform topology configuration service
This service invokes the platform plugin for platform specific topology
configuration.
The path for platform plugin script is:
/usr/share/sonic/device/$PLATFORM/plugins/config-topology.sh
If the platform plugin is not available, this service does nothing.
Signed-off-by: anamehra <anamehra@cisco.com>
[swss-common] update submodule (#13579)
```
6b6842a [NotificationProducer] add pipeline support (#708)
2cb5ea0 Increase the netlink buffer size from 3MB to 16MB. (#739)
dacbdad RedisPipeline ignore flush when call dtor from another thread. (#736)
```
issue #13395
Fix a bug about sudo failure.
/usr/local/share/buildinfo/scripts/buildinfo_base.sh: line 24: sudo: command not found
Fix an issue about warning message.
./scripts/run_with_retry: line 4: [: : integer expression expected
- Why I did it
Add new ACL key BTH_OPCODE and AETH_SYNDROME
- How I did it
Add new ACL key BTH_OPCODE and AETH_SYNDROME
- How to verify it
manual test
unit test
Includes below commits
```
0d5e68f5a [GCU] Ignore bgpraw table in GCU operation (#2628)
22757b1f3 Add interface link-training command into the CLI doc (#2257)
f4f857e10 [GCU] Ignore bgpraw in GCU applier (#2623)
b5ac60036 [muxcable][config] Add support to enable/disable ceasing to be an advertisement interface when `radv` service is stopped (#2622)
981f9531e [chassis][voq] Add "show fabric reachability" command. (#2528)
fba87f43f Revert (#2599)
d6d7ab37f [warm-reboot] Use kexec_file_load instead of kexec_load when available (#2608)
db4683d40 fix show techsupport error (#2597)
3d8e9c62d [GCU] Prohibit removal of PFC_WD POLL_INTERVAL field (#2545)
163e766cc [techsupport] include APPL_STATE_DB dump (#2607)
8703773eb YANG Validation for ConfigDB Updates: RADIUS_SERVER (#2604)
c2d746d4f Remove TODO comment which is no longer relevant (#2600)
f09da9983 [show] Add bgpraw to show run all (#2537)
39ac5641b Extend fast-reboot STATE_DB entry timer (#2577)
```
Update sonic-platform-common submodule head to include:
38a7a65 mihirpat1 Wed Jan 25 09:49:05 2023 -0800 Change get_tx_bias return type to list (sonic-net/sonic-platform-common#342)
ecb7dde qinchuanares Sat Jan 21 11:24:37 2023 -0800 add SOP ROC in bulk status (sonic-net/sonic-platform-common#341)
Signed-off-by: Mihir Patel <patelmi@microsoft.com>
#### Why I did it
Improve naming convention for bgp notification events and change type of leaf for sonic-events-host mem usage from uint64 to decimal64
#### How I did it
Replace "-" with "_"
Replace uint64 with decimal64
#### How to verify it
Run yang model unit tests
#### Description for the changelog
Change YANG model leaf naming convention for bgp notification
#### Why I did it
Segfault was occuring when running memory_checker
#### How I did it
Deinit publisher immediately after publishing
#### How to verify it
Manual testing
Why I did it
This PR is an enhancement of PR #13105
Because the input string of AttachTo for ACL table can appear in both port name group and port alias group, I added a logic to determine whether the string should be port name or port alias
If all the input strings belong to port name group, then we treat all of them as port name
If all the input strings belong to port alias, then we treat all of them as port alias
If all the input string belongs to both port alias group and port name group, we prefer port alias. The behavior is as before.
How I did it
Walk through all port names/alias in the input to make a decision.
How to verify it
Verified by adding UT.
a931d6c Prince George Wed Jan 18 19:10:55 2023 -0800 [Xcvrd]: Fix optics insertion/removal not detected (#333)
2211b7e mihirpat1 Wed Jan 18 16:00:22 2023 -0800 Xcvrd should restart if any child thread crashes (#326)
753b550 judyjoseph Tue Jan 17 13:10:09 2023 -0800 Chassisd do an explicit stop of the config_manager (#328)
879d630 Tal Berlowitz Fri Jan 6 01:57:42 2023 +0200 Fix bug where transceiver info is missing after port breakout change (#329)
e119b69 Junchao-Mellanox Tue Dec 13 19:54:49 2022 +0800 Remove TODO comments which are no longer needed (#325)
Signed-off-by: Mihir Patel <patelmi@microsoft.com>
According to its manual page,
"[dget in its] first form, [..] fetches the requested URLs.
If this is a .dsc or .changes file, then dget acts as a source-package
aware form of wget: it also fetches any files referenced in the
.dsc/.changes file.
The downloaded source is then checked with dscverify and,
if successful, unpacked by dpkg-source."
Thus, when possible, dget use is preferable to wget so that sources
authenticity can be performed automatically by dscverify"
Signed-off-by: Guillaume Lambert <guillaume.lambert@orange.com>
Why I did it
When getting system mac of centec platform, it would increase by 1 the last byte of mac, but it could not consider the case of carry.
How I did it
Firstly, I would replace the ":" with "" of mac to a string.
And then, I would convert the mac from string to int and increase by 1, at last convert it to string with inserting ":".
Why I did it
The current PTF library contains a typo - when building a VxLAN packet, it uses the VxLAN module directly from the scapy library which will cause test failures.
How I did it
Patch simple_vxlan_packet to use the VxLAN module wrapped/defined in packet.py from the PTF library.
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
Why I did it
There is a queue in sysmonitor.py that is created based on an object of multiprocessing.Manager.
After performing fast-reboot, system health monitor is being shut down, what causes this Manager to be shut down as well, since it is a child-process of healthd.
That's why I moved the creation of this Manager from the top of the file to the function Sysmonitor.system_service() (The only place it is used), to make Manager a child-process of Sysmonitor, instead of Healthd. This way both the queue (the Manager) and the processes that uses this queue will be child-processes of the same process, and the problematic scenario of sysmonitor sending messages to a dead queue will not be possible.
How I did it
Removed the definition of manager as global and moved it to system_service() function
How to verify it
Perform a fast reboot and verify the traceback issue is fixed
Why I did it
[Build] Support Debian snapshot mirror to improve build stability
It is to enhance the reproducible build, supports the Debian snapshot mirror. It guarantees all the docker images using the same Debian mirror snapshot and fixes the temporary build failure which is caused by remote Debain mirror indexes changed during the build. It is also to fix the version conflict issue caused by no fixed versions of some of the Debian packages.
How I did it
Add a new feature to support the Debian snapshot mirror.
How to verify it
Why I did it
This PR is to update minigraph.py to support both port alias and port name as input of AttachTo attribute of ACL table.
Before this change, only port alias is supported.
How I did it
Add a global variable to store port names
Search both port names and port alias wheh parsing the value of AttachTo.
How to verify it
Verified by a new unit test case test_minigraph_acl_attach_to_ports
Verified by copying the new minigraph.py to a testbed and run conflg load_minigraph.
Why I did it
Ragile adapter ra-b6510-32c ra-b6510-48v8c ra-b6910-64c ra-b6920-4s to kernel 5.x
Signed-off-by: “pettershao” pettershao@ragilenetworks.com
#### Why I did it
Added SONiC YANG model for RADIUS.
Fixes https://github.com/sonic-net/sonic-buildimage/issues/12477
#### How I did it
Added the RADIUS and RADIUS_SERVER tables for global and per RADIUS server configuration. RADIUS statistics reside in COUNTERS_DB and are not part of the configuration. These are not a part of this PR.
#### How to verify it
Compiled sonic_yang_mgmt-1.0-py3-none-any.whl.
#### Description for the changelog
SONiC YANG model for RADIUS.
Why I did it
docker-sonic-mgmt build is failing.
How I did it
stretch docker is disabled recently. Update docker-sonic-mgmt to buster.
Migrate from sonictest to sonicbld. Because Azure requires migrate vm from uswest2 to uswest3.
Fix a build issue when build image.
How to verify it
Update sonic-swss-common submodule pointer to include the following:
a4987b9 Change the dtor of ProducerStateTable to virtual method (#735)
7be565c [hash]: Add GH DB schema. (#733)
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
This is primarily to fix the armhf build failure due to deepdiff python
module getting updated.
1eb7a5b Pin deepdiff to version 6.2.2
ae09e3f [caclmgrd][dualtor] add iptables rule for dualtor gRPC to allow packets getting forwarded from loopback IP
00cb8cb [hostcfgd] Optimize the hostcfgs by moving the definition cmds into the loop to optimize the enable/disable service command run.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
