Commit Graph

51 Commits

Author SHA1 Message Date
zzhiyuan
4d4b489a5f
Add platform.json to Arista platforms (#6150)
platform.json is needed for sonic-mgmt testing. Also in the future it will be used as part of dynamic port breakout.

Also removed the folder symlink for BlackhawkDD because it has a different platform.json than BlackhawkO.

Co-authored-by: Zhi Yuan Carl Zhao <zyzhao@arista.com>
2020-12-08 10:20:13 -08:00
Samuel Angebault
5bfe37ca42
[Arista] Update driver submodules (#5686)
- Enable thermalctld support for our platforms
 - Fix Chassis.get_num_sfp which had an off by one
 - Implement read_eeprom and write_eeprom in SfpBase
 - Refactor of Psus and PsuSlots. Psus they are now detected and metadata reported
 - Improvements to modular support

Co-authored-by: Zhi Yuan Carl Zhao <zyzhao@arista.com>
2020-10-23 12:28:36 -07:00
Samuel Angebault
a24b581d80
[Arista] Add pcie.yaml configuration file for a few platforms (#5527)
* Add pcie.yaml configuration for Gardena
* Add pcie.yaml configuration for Upperlake
* Add pcie.yaml configuration for Clearlake
* Add pcie.yaml configuration for Lodoga
2020-10-02 09:05:43 -07:00
abdosi
a6a10f05b7
In SAI 3.5 by default we are supporting 256 Group with 64 Memeber each. (#5400)
However in SAI 3.7 default behaviout got changes to 128 Group and 128
    Memeber each.

    This change is to make sure we are using same ECMP Group/Memeber Per
    Group for 3.7 also so that behaviour is consistent.

Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
2020-09-22 11:21:12 -07:00
Wei Bai
0b6fd70767
Update PG profiles for Arista 7050 (#5324)
* Update pg_profile_lookup.ini
2020-09-08 11:57:21 -07:00
abdosi
b6efb49817
Update bcm soc property bcm_num_cos from 8 to 10 (#5314)
as needed by SAI 3.7 and above. Without this change
Warmboot fails from 3.5 to 3.7 as Braodcoam Datastructure
gets corrupted after warm-boot.

Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
2020-09-04 07:40:17 -07:00
zzhiyuan
2c426a8290 Skip thermalctld for arista platforms (#4893)
thermalctld throwing error messages because it is not yet fully configured, disabling it for now on arista platforms.

Co-authored-by: Zhi Yuan Carl Zhao <zyzhao@arista.com>
2020-07-12 18:08:51 +00:00
Wenda Ni
dbdc166f6f
Add new hwsku Arista-7050QX32S-Q32 (#3091)
Signed-off-by: Wenda Ni <wenni@microsoft.com>
2019-06-27 17:22:44 -07:00
Samuel Angebault
df063bd78d [device/Arista] Add initial support for platform API (#2964)
* Congregate plugin scripts for Arista platforms

* Update arista driver submodules

Pulls new platform API related changes
2019-06-07 09:01:09 -07:00
Samuel Angebault
77cde50541 [device/Arista] Improvements to the boot of Arista devices. (#2898)
* Fix showing systemd shutdown sequence when verbose is set

* Fix creation of kernel-cmdline file

Sometimes boot0 prints error
"mv: can't preserve ownership of '/mnt/flash/image-arsonic.xxxx/kernel-cmdline': Operation not permitted"

* Improve flash space usage during installation

Some older systems only have 2GB of flash available. Installing a second
image on these can prove to be challenging.
The new installation process moves the installer swi to memory in order
to avoid free up space from the flash before uncompressing it there.
It removes all the flash space usage spike and also improves the IO
since the installation is no more reading and writting to the flash at
the same time.

* Add support of 7060CX-32S-SSD

* 7260CX3: use inventory powerCycle procedures

* 7050QX-32S: use inventory powerCycle procedures

* 7050QX-32: use inventory powerCycle procedures

* platform: arista: add common platform_reboot

Replace platform_reboot by a link to new common for devices already
using a similar script.

* 7060CX-32S: use inventory powerCycle procedures

* Install python smbus in pmon

Some platform plugin need the python smbus library to perform some actions.
This installs the dependency.
2019-05-15 12:45:05 -07:00
Wenda Ni
1cc6afc9a9 [QoS]: fix size and xoff value on a7050-QX-32S, -QX32, and s6000(#2527)
Signed-off-by: Wenda <wenni@microsoft.com>
2019-02-04 22:27:01 -08:00
Wenda Ni
ce9a3f0c5a [QoS]: QoS Config change for multiple devices (#2505)
* QoS config change: 1) DSCP mapping; 2) link pg/queue 6 to lossy buffer;
3) redistribute scheduler

Signed-off-by: Wenda <wenni@microsoft.com>

* Add scheduling weight to queue 2

Signed-off-by: Wenda <wenni@microsoft.com>

* Link pg/queue 2 to lossy buffer

Signed-off-by: Wenda <wenni@microsoft.com>

* Update the pg headroom for a7060-D48C8 50G

Signed-off-by: Wenda <wenni@microsoft.com>

* Update config gen test for qos

Signed-off-by: Wenda <wenni@microsoft.com>

* Update pg headroom size, and update egress lossy pool size accordingly

Signed-off-by: Wenda <wenni@microsoft.com>

* Update headroom pool size; Update ingress service pool and egress lossy
pool sizes accordingly;

Signed-off-by: Wenda <wenni@microsoft.com>

* a7260: update headroom pool size; Update ingress service pool and egress lossy pool sizes accordingly;

Signed-off-by: Wenda <wenni@microsoft.com>

* Update config gen test for buffer

Signed-off-by: Wenda <wenni@microsoft.com>
2019-01-30 19:00:13 -08:00
Wenda Ni
b7330ddfc3 [buffer]: Add buffer defaults for t0 on s6000 and a7050 (#2438)
Signed-off-by: Wenda <wenni@microsoft.com>
2019-01-15 15:34:33 -08:00
Wenda Ni
f5e678cf84 Port QoS & buffer changes in 0330 to master (#2239)
* 1) DSCP 46 to 5; 2) ecn config for lossless traffic; 3) ecn on by default; 4) DWRR equal weight;

Signed-off-by: Wenda <wenni@microsoft.com>

* 1) link pg & queue 5 to lossy buffer profile; 2) ingress lossless alpha 1/8

Signed-off-by: Wenda <wenni@microsoft.com>

* Update the test case for qos & buffer json template

Signed-off-by: Wenda <wenni@microsoft.com>

* Migrate a7050-qx32 and s6000 to use pg_profile lookup architecture

Signed-off-by: Wenda <wenni@microsoft.com>

* Update pg headroom egress service pool for a7050-qx-32s, a7050-qx32, and s6000

Signed-off-by: Wenda <wenni@microsoft.com>

* Link queue 5 to lossy profile

Signed-off-by: Wenda <wenni@microsoft.com>
2018-12-04 20:51:55 -08:00
Wenda Ni
77652c55fd [QoS]: Unify qos json by using qos_config.j2 template (#2023)
* Unify qos config with qos_config.j2 template

Signed-off-by: Wenda <wenni@microsoft.com>

* Change 7050 to use qos config template

Signed-off-by: Wenda <wenni@microsoft.com>

	modified:   device/arista/x86_64-arista_7050_qx32/Arista-7050-QX32/qos.json.j2
	modified:   device/arista/x86_64-arista_7050_qx32s/Arista-7050-QX-32S/qos.json.j2

* Change a7060, a7260, s6000, s6100, z9100  to use qos config template

Signed-off-by: Wenda <wenni@microsoft.com>

* Change mlnx devices to use qos config template

Signed-off-by: Wenda <wenni@microsoft.com>

	modified:   ../../../mellanox/x86_64-mlnx_msn2100-r0/ACS-MSN2100/qos.json.j2
	modified:   ../../../mellanox/x86_64-mlnx_msn2410-r0/ACS-MSN2410/qos.json.j2
	modified:   ../../../mellanox/x86_64-mlnx_msn2700-r0/ACS-MSN2700/qos.json.j2
	modified:   ../../../mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/qos.json.j2

* Change barefoot devices to use qos config template

Signed-off-by: Wenda <wenni@microsoft.com>

	modified:   barefoot/x86_64-accton_wedge100bf_32x-r0/montara/qos.json.j2
	modified:   barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/qos.json.j2

* Change accton as7212 to use qos config template

Signed-off-by: Wenda <wenni@microsoft.com>

	modified:   accton/x86_64-accton_as7212_54x-r0/AS7212-54x/qos.json.j2

* Apply PORT_QOS_MAP to active ports only

Signed-off-by: Wenda <wenni@microsoft.com>

* Update qos config test with qos_config.j2 template

Signed-off-by: Wenda <wenni@microsoft.com>

* Update sample output of qos-dell6100.json

Signed-off-by: Wenda <wenni@microsoft.com>

* Remove generating the default port name and index list, i.e., remove the generate_port_lists macro, because PORT is always defined

Signed-off-by: Wenda <wenni@microsoft.com>

* Include pfc_to_pg_map according to platform asic type obtained from
/etc/sonic/sonic_version.yml rather than specifying per hwsku

Signed-off-by: Wenda Ni <wenni@microsoft.com>

* Customize TC_TO_PRIORITY_GROUP_MAP and
PFC_PRIORITY_TO_PRIORITY_GROUP_MAP for barefoot

Signed-off-by: Wenda <wenni@microsoft.com>

* Unify PFC_PRIORITY_TO_PRIORITY_GROUP_MAP: remove "0":"0", "1":"1" as
these two pgs do not generate PFC frames.

Signed-off-by: Wenda <wenni@microsoft.com>
2018-10-17 14:10:34 -07:00
Ying Xie
5ab66b191a
[bcm config] remove scache_filename config entry (#2140)
Warm boot is managed by SAI. This configuration entry shouldn't be
included in bcm config.

Signed-off-by: Ying Xie <ying.xie@microsoft.com>
2018-10-12 08:05:38 -07:00
zzhiyuan
7cdf3cb7f7 [devices]: Fix broadcom lane map for 7050-QX32S (#2120)
First port lane map needs to be swapped.
2018-10-04 14:31:54 -07:00
Samuel Angebault
e72d63cf92 [arista] Update Arista drivers submodule (#2097)
* [arista] Update Arista drivers submodule

* Fix 7050qx32 fancontrol for kernel 4.9

* Fix 7060cx32s fancontrol for kernel 4.9

* Install python3-yaml for sonic config tests

* Fix 7260cx3 fancontrol for kernel 4.9

* Fix hwsku-init scripts and permissions

* Preserve old_config folder in boot0
2018-09-28 21:27:41 -07:00
Ying Xie
bd96e097a9 [7050] device specific hwsku-init file needs execution privilege (#2101)
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
2018-09-28 14:16:45 -07:00
Ying Xie
11ac4fe76e [7050] Rename HWSKU Arista-7050-Q31S4 to Arista-7050QX-32S-S4Q31 (#2090)
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
2018-09-27 01:11:18 -07:00
zzhiyuan
9b2a5943bd [devices]: Add new hwsku Arista-7050-Q31S4 (#2075) 2018-09-25 01:24:31 -07:00
Taoyu Li
018b5899be [updategraph] add support to use preset config instead of default minigraph (#2050)
* [updategraph] add support to use preset config instead of default minigraph

* Fix variable case

* Remove default minigraph case

* Remove default minigraphs and add default_sku files
2018-09-21 22:01:10 -07:00
Ying Xie
e7ef637a09
[config-bcm] move broadcom config files to device folder (#1947)
- Future versions of SAI packages will stop carrying these files.

Signed-off-by: Ying Xie <ying.xie@microsoft.com>
2018-08-20 10:11:11 -07:00
Wenda Ni
86205b858a [devices/a7050]: Separate ECN/WRED profile per queue to maintain a consistent view among CONFIG_DB get commands (#1941)
for ecn on/off operations, which are conducted at per queue all interfaces granularity.

TODO:
Ideally, we should have ECN/WRED profile applied at per interface per queue
granularity, and we should do it for all hwskus under the device
directory, not just 7050.

Signed-off-by: Wenda Ni <wenni@microsoft.com>
2018-08-16 23:11:20 -07:00
Samuel Angebault
26afa348ea [device] Misc fixes for Arista platforms (#1844)
* Update sensors.conf for 7050QX-32 and 7050QX-32S

These two platforms were using a previous version of a kernel driver.
The new one names the i2c buses differently.
We therefore need to rename them here.

* Fix the default minigraph for the 7050QX-32S

The interface offset is invalid which makes sonic-cfggen generate an
invalid config_db.jon in rc.local.
This config then silently makes orchagent/syncd fail.

* Use the partition on which sonic-aboot.swi is

Instead of always assuming /mnt/flash, use the partition where the image
to be installed lies.
This allow for the image to be on any partition.
2018-07-05 14:30:57 -07:00
Samuel Angebault
ec850df74b [devices]: Use arista library as led plugin for more platforms. (#1809)
This apply to arista_7050_qx32 and arista_7050_qx32s.
2018-06-23 17:24:56 -07:00
Wenda Ni
7389443597 [devices]: Migrate a7050-qx-32s to use the new buffers config architecture and create the profile for t1 (#1709)
Move the ingress lossless profile from buffers.json.j2 to pg_profile_lookup.ini

Move pool and the rest of the profile from buffers.json.j2 to
buffers_defaults_t1.j2

Add port speed info in port_config.ini

Make buffers_default_t1.j2 the default profile in buffers.json.j2

Signed-off-by: Wenda Ni <wenni@microsoft.com>
2018-06-22 18:53:30 -07:00
pavel-shirshov
3681cfa553
Use only active ports when applying buffers/qos configuration (#1787)
* First part of skipping not used port for qos configuration

* Use active ports only to set QoS parameters for 6100

* Add a test for qos.json.j2

* Add a test for Dell S6100 buffers.json template

* Update submodulre
2018-06-21 11:51:37 -07:00
Joe LeVeque
6fc38af2f0
Remove fan LED initialization from led_control plugins for Arista 7050-QX32, 7050-QX-32S (#1733) 2018-05-23 17:57:38 -07:00
Samuel Angebault
c1e37a6be9 [Arista]: Add a reboot script for all remaining platforms. (#1706)
Adds a platform_reboot script for 7050QX-32, 7050QX-32S and 7060CX-32S.
This allow a proper cold reboot to happen.
2018-05-15 05:27:10 -07:00
Wenda Ni, Ph.D
f947172c0a [devices]: Merge ingress service pools of lossless and lossy traffic for TD2 (#1578)
Signed-off-by: Wenda <wenni@microsoft.com>
2018-04-13 22:22:21 -07:00
lguohan
25d73ef1a1
[device]: fix led_control plugin on Arista 7050-QX32S (#1527)
Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-03-24 02:04:25 -07:00
Wenda Ni, Ph.D
de5e5332be [mmu]: reduce headroom size and remove queue min for lossless traffic (#1508)
* Reduce xoff size for in-flight packets of lossless traffic

Signed-off-by: Wenda <wenni@microsoft.com>

* Must explicitly specify min buffer size per queue to be zero

Signed-off-by: Wenda <wenni@microsoft.com>
2018-03-17 14:48:52 -07:00
Wenda Ni, Ph.D
ad5f871feb [devices]: Consolidate to one egress lossless buffer configuration (#1493) 2018-03-16 15:52:08 -07:00
Wenda Ni, Ph.D
1f4ce098b5
Buffers config (#1476)
* Improve memory utilization through more sharing at the ingress on A7050-QX-32S

Signed-off-by: Wenda <wenni@microsoft.com>

* Apply buffers config changes on A7050-QX-32S to A7050-QX32

Signed-off-by: Wenda <wenni@microsoft.com>

* Apply buffers config changes on A7050-QX-32S to S6000
2018-03-12 14:25:57 -07:00
Wenda Ni, Ph.D
20ab99bf31 [qos]: Apply ECN configuration on lossless queue for 7050-QX-32S and S6000 (#1439) 2018-03-03 10:09:49 -08:00
Wenda Ni, Ph.D
33d5a9cfd6
Add qos.json for Arista-7050-QX-32S (#1388)
* Add qos.json for Arista-7050-QX-32S

This file is a modification from the one in the swss docker, and is applied in the base image

Signed-off-by: Wenda <wenni@microsoft.com>

* Prepare buffers.json.j2 alongside with qos.json to allow qos config to take
effect on a7050-QX-32S

Signed-off-by: Wenda <wenni@microsoft.com>
2018-02-28 17:30:34 -08:00
Taoyu Li
6f12ff286d [minigraph]: Set hostname in all default minigraphs to 'sonic' (#1333) 2018-01-23 18:16:15 -08:00
yurypm
b57cfd7295 [arista] Delete sysfs entries for all Arista Digital Power Monitor/Management devices (#1256)
* Bump sonic-platform-modules-arista submodule

* [arista] Remove DPM entries from Arista sensors.conf files
2017-12-20 14:05:23 -08:00
Samuel Angebault
46a653485c [device/Arista] Add fancontrol config for all Arista platforms (#1242)
* Rename i2c busses for a7060cx-32 platform

* Update fancontrol for a7260cx3-64

* Add fancontrol for a7050qx-32

* Add fancontrol for a7050qx-32s

* Add fancontrol for a7060cx-32s
2017-12-15 16:39:15 -08:00
Samuel Angebault
9dc85620f3 [device/arista] Add psuutil plugin for Arista platforms (#1221)
* Bump sonic-platform-modules-arista submodule

* Add psuutil plugnis for Arista platforms
2017-12-08 16:32:50 -08:00
Joe LeVeque
002aabe8ba Change all port_config.ini column headers from 'port' to 'index' (#1001) 2017-09-30 11:02:18 -07:00
Samuel Angebault
d918b13491 Update sfputil support for Arista platforms (#912)
* Bump sonic-platform-modules-arista submodule

* Fix sfputil plugin for arista_7060_cx32s

* Fix sfputil plugin for arista_7260cx3_64

* Add front panel port number for arista platforms
2017-08-24 00:10:50 -07:00
Joe LeVeque
49feeaa456 [LEDs]: Initialize status and fan LEDs to green on Arista 7050-QX-32/7050-QX-32-S (#886) 2017-08-14 10:25:50 -07:00
Joe LeVeque
178fc032ae [sfputil]: Add support for SFP presence, low-power mode and reset (#877)
- Update sfputil plugins for Dell FORCE10-S6000, Arista 7050-QX-32, 7050-QX-32-S
2017-08-11 11:36:32 -07:00
Joe LeVeque
f49cac086f Remove extra trailing newlines at EOF (#804)
Files now end with a single newline
2017-07-12 20:54:37 -07:00
Shuotian Cheng
12ce4ca4ea [Arista]: Update Arista-7050-QX-32S port_config.ini (#789) 2017-07-06 02:27:25 -07:00
lguohan
e904b3bf46 [device]: add minigraph and LED support for Arista 7050 QX32S (#773) 2017-06-30 10:28:39 -07:00
Shuotian Cheng
fedfb82ebf [Arista]: Update port_config.ini file for Arista-7050-QX32S (#674) 2017-06-05 22:41:39 -07:00
Samuel Angebault
7d33387e7c [platform] Complete support for Arista-7050QX-32S (#661)
* Bump sonic-platform-modules-arista submodule

* Use sonic_sfputil plugin from the arista library

* Fix undefined variable varlog_size

* Prevent minigraph.xml to be removed from the flash

* Update DCS-7050QX-32 sensors config
2017-06-02 01:31:53 -07:00