The snmp tool is required for interacting with certain type
of PDU hosts in platform PSU/power related testing. This
change is to have the snmp tool pre-built in the sonic-mgmt
docker image.
Signed-off-by: Xin Wang <xinw@mellanox.com>
In the scope of migration from docker shell plugin to docker connection plugin, we need to have docker-ce-cli installed in docker-sonic-mgmt. Azure/sonic-mgmt#1269
Added docker-ce-cli package to docker-sonic-mgmt.
If some table with a list of tuples (interface name, ip prefix) has ip prefixes without a mask length, it will cause issues in SONiC. For example quagga and frr will treat ipv4 address without a mask, so "10.20.30.40" address will be treated as "10.0.0.0/8", which is dangerous.
The fix here is that when pfx_filter get a tuple (interface name, ip prefix), where the ip prefix doesn't have prefix mask length, add a mask by default: "/32 for ipv4 addresses, /128 for ipv6 addresses".
Co-authored-by: Pavel Shirshov <pavel.contrib@gmail.com>
- Xilinx/pericom peripherals are not actively used in DellEMC S6100 switch.
- These peripherals are throwing PCIE corrected messages in some of the units and filling syslog.
- Since it is not usable disabling it at startup.
* [sonic-buildimage] Changes to make network specific sysctl
common for both host and docker namespace (in multi-npu).
This change is triggered with issue found in multi-npu platforms
where in docker namespace
net.ipv6.conf.all.forwarding was 0 (should be 1) because of
which RS/RA message were triggered and link-local router were learnt.
Beside this there were some other sysctl.net.ipv6* params whose value
in docker namespace is not same as host namespace.
So to make we are always in sync in host and docker namespace
created common file that list all sysctl.net.* params and used
both by host and docker namespace. Any change will get applied
to both namespace.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Address Review Comments and made sure to invoke augtool
only one and do string concatenation of all set commands
* Address Review Comments.
* Support for connecting to DB in namespace via IP:port ( using docker bridge network ) for applications in multi-asic platform.
* Added the default IP as 127.0.0.1 if the IPaddress derivation from interface fails.
Moved the localhost loopback IP binding logic into the supervisor.j2 file.
* [systemd-generator]: Fix the code to make sure that dependencies
of host services are generated correctly for multi-asic platforms.
Add code to make sure that systemd timer files are also modified
to add the correct service dependency for multi-asic platforms.
Signed-off-by: SuvarnaMeenakshi <sumeenak@microsoft.com>
* [systemd-generator]: Minor fix, remove debug code and
remove unused variable.
* Changes to make default route programming
correct in multi-asic platform where frr is not running
in host namespace. Change is to set correct administrative distance.
Also make NAMESPACE* enviroment variable available for all dockers
so that it can be used when needed.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Fix review comments
* Review comment to check to add default route
only if default route exist and delete is successful.
Add changes for syslog support for containers running in namespaces on multi ASIC platforms.
On Multi ASIC platforms
Rsyslog service is only running on the host. There is no rsyslog service running in each namespace.
On multi ASIC platforms the rsyslog service on the host will be listening on the docker0 ip address instead of loopback address.
The rsyslog.conf on the containers is modified to have omfwd target ip to be docker0 ipaddress instead of loopback ip
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
thermalctld throwing error messages because it is not yet fully configured, disabling it for now on arista platforms.
Co-authored-by: Zhi Yuan Carl Zhao <zyzhao@arista.com>
While testing reboot case for 201911 facing error:
supervisor-proc-exit-listener FATAL command at '/usr/bin/supervisor-proc-exit-listener' is not executable
Signed-off-by: Roman Savchuk <romanx.savchuk@intel.com>
The program name in critical_processes file must match the program name defined in supervisord.conf file.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
**- Why I did it**
After discussed with Joe, we use the string "/usr/bin/syncd\s" in Monit configuration file to monitor
syncd process on Broadcom and Mellanox. Due to my careless, I did not find this bug during the
previous testing. If we use the string "/usr/bin/syncd" in Monit configuration file to monitor the
syncd process, Monit will not detect whether syncd process is running or not.
If we ran the command `sudo monit procmactch “/usr/bin/syncd”` on Broadcom, there will be three
processes in syncd container which matched this "/usr/bin/syncd": `/bin/bash /usr/bin/syncd.sh
wait`, `/usr/bin/dsserve /usr/bin/syncd –diag -u -p /etc/sai.d/sai.profile` and `/usr/bin/syncd –diag -
u -p /etc/sai.d/said.profile`. Monit will select the processes with the highest uptime (at there
`/bin/bash /usr/bin/syncd.sh wait`) to match and did not select `/usr/bin/syncd –diag -u -p
/etc/sai.d/said.profile` to match.
Similarly, On Mellanox Monit will also select the process with the highest uptime (at there
`/bin/bash /usr/bin/syncd.sh wait`) to match and did not select `/usr/bin/syncd –diag -u -p
/etc/sai.d/said.profile` to match.
That is why Monit is unable to detect whether syncd process is running or not if we use the string “/usr/bin/syncd” in Monit configuration file. If we use the string "/usr/bin/syncd\s" in Monit configuration file, Monit can filter out the process `/bin/bash /usr/bin/syncd.sh wait` and thus can correctly monitor the syncd process.
**- How I did it**
**- How to verify it**
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
Issue: Port with AOC cable does not come up when "sfputil reset <port_name>" is executed.
Modified the incorrect mask used in reset API to resolve the issue.
When building the SONiC image, used systemd to mask all services which are set to "disabled" in init_cfg.json.
This PR depends on https://github.com/Azure/sonic-utilities/pull/944, otherwise `config load_minigraph will fail when trying to restart disabled services.
- Ensure all features (services) are in the configured state when hostcfgd starts
- Better functionalization of code
- Also replace calls to deprecated `has_key()` method in `tacacs_server_handler()` and `tacacs_global_handler()` with `in` keyword.
This PR depends on https://github.com/Azure/sonic-utilities/pull/944, otherwise `config load_minigraph` will fail when trying to restart disabled services.
FDB/ARP/Default routes files are deleted after swssconfig. This
makes debugging/validation of device conversion hard. This PR
saves those files in order to facilitate debugging of device conversion.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
* Change port index in port_config.ini to 1-based
* Add default port index to port_config.ini, change platform plugins to accept 1-based port index
* fix port index in sfp_event.py
Verified after loading on TH platforms cpu usage gone down:
Previous:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
2521 root 20 0 1512860 360452 63540 S 144.6 4.4 8:00.03 syncd
After Fix:
7500 root 20 0 1592420 350912 64184 S 45.4 4.3 3:50.99 syncd
While migrating to SONiC 20181130, identified a couple of issues:
1. union-mount needs /host/machine.conf parameters for vendor specific checks : however, in case of migration, the /host/machine.conf is extracted from ONIE only in https://github.com/Azure/sonic-buildimage/blob/master/files/image_config/platform/rc.local#L127.
2. Since grub.cfg is updated to have net.ifnames=0 biosdevname=0, 70-persistent-net.rules changes are no longer required.
Don't limit iptables connection tracking to TCP protocol; allow connection tracking for all protocols. This allows services like NTP, which is UDP-based, to receive replies from an NTP server even if the port is blocked, as long as it is in reply to a request sent from the device itself.
Images built from 201911 branch and installed on devices where we mount /var/lib/docker in RAM (because the HDD is small) were failing as there was not enough space to untar docker.tar.gz . This is due to the increase in total number of containers in the image.
As of today, /var/lib/docker contains 1.1 GB of data. Therefore, this PR increases the size of the ramdisk to 1.3 GB to accommodate all the containers as of now and any new container going forward.
Example output below from an Arista-7050-QX32 SKU:
admin@str-a7050-acs-2:~$ df -h
Filesystem Size Used Avail Use% Mounted on
.....
tmpfs 1.3G 1.1G 221M 84% /var/lib/docker
.....
Verified all docker running fine and interfaces/bgp are up.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Update to sonic_cfggen and utilities to populate the (pci) device id in the "asic_id" field in the DEVICE_METADATA. This Id is parsed from the file "asic.conf" file in the device/<platform> dir. The format of entries are eg: for a 2 ASIC platform.
DEV_ID_ASIC_0=03:00.0
DEV_ID_ASIC_1=04:00.0
Going forward will use this device id as the asic instance ID passed to syncd/sai while doing create_switch. Current support is limited, supports only one TD2 platform.
* Fix the Build on 201911 (Stretch) where the directory
/usr/lib/systemd/system/ does not exist so creating
manually. Change should not harm Master (buster) where
the directory is created by Linux
* Fix as per review comments
