Why I did it
Fix#15000
isc-dhcp 4.4.1-2.3+deb11u1 is no longer available in debian repository
How I did it
update isc-dhcp to new version 4.4.1-2.3+deb11u2
Why I did it
Remove 'kvmtest-t0' and 'kvmtest-t1-lag' test jobs since all the test jobs are required (continueOnError: false) already, and will only enable one of classical and testbedV2 tests, no need to do an unnecessary 'or' compute test job.
Change classic multi-asic and t0-sonic test jobs as required (continueOnError: false) following current testbedV2's logic.
Why I did it
replace yaml.load to yaml.safe_load because yaml.safe_load is more secure
Work item tracking
Microsoft ADO (number only): 15022050
How I did it
How to verify it
Verified in DUT 201911 which yaml version < 5.1
- Why I did it
Currently, LED sysfs path is hardcoded. We will need change LED code if new LED color is supported for new platforms. This PR is aimed to improve this. By this PR, LED sysfs path is deduced from LED capability file.
- How I did it
Improve LED management on Nvidia platform:
get LED capability from capability file and deduce sysfs name according to the capability
- How to verify it
Unit test
Manual test
- Why I did it
To improve ASAN backtrace output when the call stack contains a code that is not compiled with -fno-omit-frame-pointer.
- How I did it
Added fast_unwind_on_malloc=0 to the ASAN_OPTIONS
- How to verify it
Build and test docker-syncd-mlnx.gz with ENABLE_ASAN=y
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
- Why I did it
Update SAI xml file to align with the default SKU
- How I did it
Update the SN5600 SAI xml file
- How to verify it
Install image on SN5600 device
- Why I did it
Add fan direction check to system health, all fans should be in the same direction
- How I did it
Add fan direction check to system health, all fans should be in the same direction
- How to verify it
Manual test
Unit test
Added sonic-mgmt test case to verify
Why I did it
To support BGPMon sessions from each T2 linecard ASIC
Work item tracking
Microsoft ADO (number only): 17873174
How I did it
Added change in BGPMon configuration to use Loopback4096 as source interface, since this has a unique IP per ASIC.
How to verify it
Tested by manually setting up BGPMon session on T2 LC and verified that Loopback4096 could be used as source
Why I did it
Current regex not able to capture logs, modify regex to capture syslog messages
Work item tracking
Microsoft ADO (number only): 13366345
How I did it
Code change
How to verify it
sonic-mgmt test case
What I did:
In FRR command update source <interface-name> is not at address-family level. Because of this
internal peer route-map for ipv6 were getting applied to ipv4 address family. As a result
TSA over iBGP for Ipv6 was not getting applied.
How I verify:
Manual Verification of TSA over both ipv4 and ipv6 after fix works fine.
Updated UT for this.
Added sonic-mgmt test gap: sonic-net/sonic-mgmt#8170
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
There are chassis-packet and Single asic platforms which support this 400G to 100G/40G speed change via config.
Enabling this feature for all platforms which can support this. Keeping it enabled for all does not affect the platforms
which do not support this feature yet.
Signed-off-by: anamehra anamehra@cisco.com
Why I did it
Do not require leafref as part of yang. Only need string to compare whether string received from event matches what is possible for ifname.
How I did it
How to verify it
Run UT
Why I did it
Supports new field in sonic-net/sonic-gnmi@258b887
Work item tracking
Microsoft ADO (number only): 13468195
How I did it
Add new field in telemetry.sh
How to verify it
Pipeline
Why I did it
Update ECN settings for T2 chassis
How I did it
Updated qos config file to load these settings during switch bootup
How to verify it
Verified on line card on T2 chassis
- Why I did it
In order to reduce sonic build time, there is an option to acquire sonic slave docker(s) from artifact server (reduce sonic make configure time).
Current implementation supports only convention of:
<REGISTRY_SERVER>:<REGISTRY_PORT>/<SLAVE_BASE_IMAGE>:<SLAVE_BASE_TAG>
In case the SLAVE_BASE_IMAGE appear in internal path inside the server, the convention should be like that:
<REGISTRY_SERVER>:<REGISTRY_PORT><REGISTRY_SERVER_PATH>/<SLAVE_BASE_IMAGE>:<SLAVE_BASE_TAG>
When REGISTRY_SERVER_PATH (that is set on rules/config) will have to start with "/".
If REGISTRY_SERVER_PATH will not be set, the behavior will remain the same it works today.
- How I did it
Add ability to set REGISTRY_SERVER_PATH and update the code for docker image tag and docker image pull accordingly
- How to verify it
Use sonic slave docker image from artifact server in which the image is kept in internal folder and make sure it consume it.
Using timer-override.conf, we modify the fstrim.timer service.
For armhf, Nokia-7215 platform, we modify fstrim.timer to run daily
instead of weekly. This is required because the size of the SSD on
this platform is 16GB, which on average is nearly 10 times smaller than
most other sonic platforms. With smaller disk and the ever increasing
level of logging done by sonic, this change is required to prevent
the SSD from entering a read-only state due to inadequate free blocks.
- Fix watchdog reboot cause for wolverine linecard
- Fix PSU fan speed of 0% by adding max RPM to most psu descriptions
- Add product DCS-7060DX5-64
- Add product DCS-7060DX5-32
- Why I did it
To be able to see how much time was consumed to build a specific target.
A newly added code does those things:
1. Print build start time for target
2. Print build end time for target
3. Print elapsed time for target
- How I did it
Add a macro to record the time
Add macros to print end time and elapsed time
- How to verify it
Just build an image and check any *.log file
Signed-off-by: Yevhen Fastiuk <yfastiuk@nvidia.com>
- Why I did it
To be able to cache, and then retrieve cached "copied" debs
- How I did it
Add missed caching and cache retrieval steps
- How to verify it
Build with cache and then clean and rebuild again. The targets added to SONIC_COPY_DEBS should be taken from a cache.
Signed-off-by: Yevhen Fastiuk <yfastiuk@nvidia.com>
- Why I did it
Update the sensors.conf and pcie.yaml according to the real hardware.
- How I did it
Update the sensors.conf and pcie.yaml
- How to verify it
run relevant sonic-mgmt test cases.
Signed-off-by: Kebo Liu <kebol@nvidia.com>
- Why I did it
Add NVIDIA Copyright header to NVIDIA files added lately
- How I did it
Add NVIDIA Copyright header for the relevant files
- How to verify it
N/A (only commented text was added).
- Why I did it
Fix issue with signing tool not running due to being call with the path from the host and not the path it is mounted on inside the docker-slave
- How I did it
Modified the path on the SECURE_UPGRADE_PROD_SIGNING_TOOL flag to the path where it is mounted inside the slave docker
- How to verify it
Build SONiC using your own prod script
Normally doesn't need to measure i2c calls.
Also switched to use timespec64_sub() to ensure time delta normalized
Co-authored-by: Kostiantyn Yarovyi <kostiantynx.yarovyi@intel.com>
- Why I did it
Mellanox syncd container will be based on Debian iproute2 plus patches instead of Nvidia internal version of iproute2
- How I did it
Download iproute2 from Debian repository, apply patches and compile to create a new target.
The target is then deployed in syncd container of Mellanox switches only.
The new target is called IPROUTE2_MLNX.
- How to verify it
Compile and load on switch, verify interfaces network devices created successfully.
Verify LLDP shows connections to neighbors.
Verify ping between 2 hosts over 2 router ports is successful.
