* Changes for LLDP for Multi NPU Platoforms:-
a) Enable LLDP for Host namespace for Management Port
b) Make sure Management IP is avaliable in per asic namespace
needed for LLDP Chassis configuration
c) Make sure chassis mac-address is correct in per asic namespace
d) Do not run lldp on eth0 of per asic namespace and avoid chassis
configuration for same
e) Use Linux hostname instead from Device Metadata for lldp chassis
configuration since in multi-npu platforms device metadata hostname
will be differnt
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Address Review Comment with following changes:
a) Use Device Metadata hostname even in per namespace conatiner.
updated minigraph parsing for same to have hostname as system
hostname and add new key for asic name
b) Minigraph changes to have MGMT_INTERFACE Key in per asic/namespace
config also as needed for LLDP for setting chassis management IP.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Address Review Comments
* Multi DB with namespace support, Introducing the database_global.json file
for supporting accessing DB's in other namespaces for service running in
linux host
* Updates based on comments
* Adding the j2 templates for database_config and database_global files.
* Updating to retrieve the redis DIR's to be mounted from database_global.json file.
* Additional check to see if asic.conf file exists before sourcing it.
* Updates based on PR comments discussion.
* Review comments update
* Updates to the argument "-n" for namespace used in both context of parsing minigraph and multi DB access.
* Update with the attribute "persistence_for_warm_boot" that was added to database_config.json file earlier.
* Removing the database_config.json file to avioid confusion in future.
We use the database_config.json.j2 file to generate database_config.json files dynamically.
* Update the comments for sudo usage in docker_image_ctrl.j2
* Update with the new logic in PING PONG tests using sonic-db-cli. With this we wait till the
PONG response is received when redis server is up.
* Similar changes in swss and syncd scripts for the PING tests with sonic-db-cli
* Updated with a missing , in the database_config.json.j2 file, Do pip install of j2cli in docker-base-buster.
- change the references to 'type' field to 'sub_role'
- change the references to 'InternalFrontend' and 'InternalBackend' to 'FrontEnd' and 'BackEnd' respectively
- add a statement to reflect route-reflector for backend asics
- add a change to set "next-hop-self force" configuration for internal BGP session in multi asic platform.
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
* Multi-ASIC platforms will have the ID field in the DEVICE_METADATA, which will be pulled and
will be used when starting the orchagent process with the new option [-i INST_ID]
This is currently added only for Broadcom ASIC based platforms
* Making the asic instance ID passing global across asics/platforms.
Also changed the config DB id field to asic_id
* Minor updates
* Advance sonic-swss submodule
* Advance swss_common submodule as well due to dependencies
This change adds support to build dockers using buster as base.
- Define docker-base-buster using docker-base-stretch as starting point
- Define docker-config-engine-buster using docker-config-engine-stretch as starting point.
- sonic-mgmt-framework docker is updated to build using buster as base
Signed-off-by: Joyas Joseph <joyas_joseph@dell.com>
The one big bgp configuration template was splitted into chunks.
Currently we have three types of bgp neighbor peers:
general bgp peers. They are represented by CONFIG_DB::BGP_NEIGHBOR table entries
dynamic bgp peers. They are represented by CONFIG_DB::BGP_PEER_RANGE table entries
monitors bgp peers. They are represented by CONFIG_DB::BGP_MONITORS table entries
This PR introduces three templates for each peer type:
bgp policies: represent policieas that will be applied to the bgp peer-group (ip prefix-lists, route-maps, etc)
bgp peer-group: represent bgp peer group which has common configuration for the bgp peer type and uses bgp routing policy from the previous item
bgp peer-group instance: represent bgp configuration, which will be used to instatiate a bgp peer-group for the bgp peer-type. Usually this one is simple, consist of the referral to the bgp peer-group, bgp peer description and bgp peer ip address.
This PR redefined constant.yml file. Now this file has a setting for to use or don't use bgp_neighbor metadata. This file has more parameters for now, which are not used. They will be used in the next iteration of bgpcfgd.
Currently all tests have been disabled. I'm going to create next PR with the tests right after this PR is merged.
I'm going to introduce better bgpcfgd in a short time. It will include support of dynamic changes for the templates.
FIX:: #4231
- add "persistence" field for each redis instance in database_config.json
- we will use this information to decide if saving redis instance data while warm/fast reboot
- before multiDB changes, SONiC uses "redis-cli save " to save all the data into rdb file on default instance on port 6379
- with multiDB changes, we plan to implement "sonic-db-cli save" to save all data to corresponding rdb files on all listed redis instances which has "persistence" field set "yes"
libpython2.7, libdaemon0, libdbus-1-3, libjansson4 are common
across different containers. move them into docker-base-stretch
Signed-off-by: Guohan Lu <lguohan@gmail.com>
maintains backward compatibility to search original x509 location
when telemetry table does not have certs
Signed-off-by: Guohan Lu <lguohan@gmail.com>
When telemetry is in secure mode ,the monitor will have error log of the match string "--insecure". So I modify to be compatiable with insecure mode and secure mode.
Co-authored-by: Ubuntu <ubuntu@ip-10-5-1-21.ap-south-1.compute.internal>
Removing explicit libyang plugin path settings. Libyang debian package installs the extensions in standard location.
Libyang debian package installs the extensions in standard location as per build time configuration (install prefix is set in patch/libyang.patch). If plugin directory is not set, libyang explicitly searches the plugins in LYEXT_PLUGINS_DIR which is populated during build. The plugins are installed in LYEXT_PLUGINS_DIR itself through debian package installation.
$ grep -nr LYEXT_PLUGINS_DIR src/
src/plugin_config.h.in:18:#define LYEXT_PLUGINS_DIR "@EXTENSIONS_PLUGINS_DIR_MACRO@" /**< directory with YANG extension plugins */
src/plugins.c:420: pluginsdir = LYEXT_PLUGINS_DIR;
* [database] Implement the auto-restart feature for database container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [database] Remove the duplicate dependency in service files. Since we
already have updategraph ---> config_setup ---> database, we do not need
explicitly add database.service in all other container service files.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [event listener] Reorganize the line 73 in event listener script.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [database] update the file sflow.service.j2 to remove the duplicate
dependency.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [event listener] Add comments in event listener.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [event listener] Update the comments in line 56.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [event listener] Add parentheses for if statement in line 76 in event listener.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
Before the fix:
lldpcli configure ports Ethernet96 lldp portidsubtype local 'Eth1/1' description 50G|sonic1|Eth1/3/2
bash: sonic1: command not found
bash: Eth1/3/2: No such file or directory
After fix:
lldpcli configure ports Ethernet96 lldp portidsubtype local 'Eth1/1' description '50G|sonic1|Eth1/3/2'
run successfully.
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
The snmp tool is required for interacting with certain type
of PDU hosts in platform PSU/power related testing. This
change is to have the snmp tool pre-built in the sonic-mgmt
docker image.
Signed-off-by: Xin Wang <xinw@mellanox.com>
* Changes in sonic-buildimage for the NAT feature
- Docker for NAT
- installing the required tools iptables and conntrack for nat
Signed-off-by: kiran.kella@broadcom.com
* Add redis-tools dependencies in the docker nat compilation
* Addressed review comments
* add natsyncd to warm-boot finalizer list
* addressed review comments
* using swsscommon.DBConnector instead of swsssdk.SonicV2Connector
* Enable NAT application in docker-sonic-vs
* Add a monit config file for teamd container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* Add a copy mechanism to put the monit config file in teamd container
into base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* Add a monit config file for snmp container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* Add a copy mechanism to put the monit config file of snmp container into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* Add a monit config file for dhcp_relay container in the dir
base_image_files.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* Add a copy mechanism to put the monit config file of dhcp_relay
container into base image under /etc/monit/conf.d.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* Add a monit config file for router advertiser container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* Add a copy mechanism to put the monit config file of router advertiser
contianer into base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-Pmon] Add a monit config file for pmon container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-Pmon] Add a copy mechanism to put the monit config file into the
base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-lldp] Add a monit config file for lldp container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-lldp] Add a copy mechanism to put the monit config file into the
base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-bgp] Add a monit config file for BGP container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-bgp] Add a copy mechanism to put monit config file into the base
image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-swss] Add a monit config file for the swss container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-swss] Add a copy mechanism to put monit config file into the
base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a monit config file for syncd container on barefoot
platform.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit config file into
the base image on barefoot.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a monit config file for syncd container on broadcom.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit config file into
the base image on broadcom.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a monit config file for syncd container on cavium.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit config file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-centec] Add a monit config file for syncd container on centen
platform.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit config file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a monit config file for syncd container on centen
platform.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit config file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a monit config file for syncd container on marvell.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit conifg file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a monit config file for syncd container on
marvell-arm64.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit config file into
the base image on marvell-arm64.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a monit config file for syncd container on
marvell-armhf.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit config file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a monit config file for syncd container on mellanox.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit config file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a monit config file for syncd container on nephos.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit config file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-sflow] Add a monit config file for sflow container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-sflow] Add a copy mechanism to put the monit conifg file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-telemetry] Add a monit config file for telemetry container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-telemetry] Add a copy mechanism to put the monit config file
into the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-database] Add a monit config file for database container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-database] Add a copy mechanism to put the monit config file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-Dhcprelay] Change a typo.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-Dhcprelay] Change the process name in monit config file to
dhcrelay.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] There is no desserve process in syncd container on
barefoot.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] There is no process desserve in syncd container on
cavium.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] There is no process named desserve in syncd on centec.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] There is no process named desserve in syncd on marvell.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Should not delete the process desserve in syncd container
on marvell.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Delete the process dsserve in syncd on marvell.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Delete the process dsserve in syncd container on
marvell-arm64.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Delete the process dsserve in syncd container on
marvell-armhf.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Delete the process dsserve in syncd container on
mellanox.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-Radv] Change the process name to radvd.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-telemetry] Correct a typo in monit_telemetry.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-teamd] Delete the monit config file for teamd.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-teamd] Delete the mechanism to copy the monit config file into
base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-dhcprelay] Delete the monit config file for dhcp_relay
container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-dhcprelay] Delete the mechanism to copy the monit config file
into the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-radv] Delete the monit config file foe radv container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-radv] Delete the mechanism to copy the monit config file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-bgp] change the monit config file for BGP container such that
monit only generates alert if the process is not running for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-snmp] Change the monit config file for snmp container such that
monit only generates alret if the process is not running for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-pmon] Change the monit config file for pmon container such that
monit only generates alert if the processes are not running for 5
minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-lldp] Change the monit config file for lldp container such that
monit only generates alerts if some processes are not running for 5
minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-pmon] Delete the monit config file for pmon container since some
of processes are not running depended on the type of box.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-pmon] Delete the copy mechanism to copy the monit config file
into the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-lldp] Change the matching name for the process lldpd.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-swss] Change the monit config file for swss container such that
monit only generates alerts if the processes are not running for 5
minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Change the monit config file for syncd container on
barefoot such that monit only generates alerts if the process is not
running for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Correct a typo in monit config file.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Change the monit config file for syncd container on
broadcom such that monit only generates alerts if the processes are not
running for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Change the monit config file for syncd container on
cavium such that monit only generates alerts if the process is not
running for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Change the monit config file for syncd container such
that monit only generates alerts if the process is not running for 5
minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Change the monit config file for syncd container on
marvell such that monit only generates alerts if the process is not
running for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Change the monit config file for syncd container on
marvell-arm64 such that monit only generates alerts if the process is
not running for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Change the monit config file for syncd container on
marvell-armhf such that monit will generate alert if the process is not
running for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Change the monit config file for syncd container on
mellanox such that monit only generates alerts if the process is not
running for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-sycnd] Change the monit config file for syncd container such
that monit only generates alerts if the processes are not running for 5
minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-sflow] Change the monit config file for sflow container such
that monit only generates alerts if the process is not running for 5
minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-telemetry] Change the monit config file for telemetry container
such that monit only generates alerts if the processes are not running
for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-database] Change the monit config file for database container
such that monit only generates alerts if the process is not running for
5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-database] Use 4 spaces to replace 2 spaces in monit config file.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-bgp] Use 4 spcess to replace 2 spaces in monit config file.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-lldp] Use 4 spaces to replace 2 spaces in monit config file.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-swss] Use 4 spaces to replace 2 space in monit config file.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-sflow] Use 4 spaces to replace 2 spaces in monit config file.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-snmp] Use 4 spaces to replace 2 spaces in monit config file.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-telemetry] Use 4 spaces to replace 2 spaces in monit config
file.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file
on barefoot.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file
on broadcom.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file
on cavium.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file
on centec.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file
on marvell.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file
on mellanox.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Use 4 spaces to repalce 2 spaces in the monit config file
on nephos.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-bgp] Remove the trailing extra spaces in monit config file.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
DHCP relay MONitor (dhcpmon) keeps track of DORA messages. If DHCP Relay
is detected to be not forwarding DORA message, dhcpmon will log such event
to syslog. Under the hood dhcpmon keeps counts of clients DR messages,
forwarded DR messages, DHCP server OA messages, and forwarded OA messages.
dhcpmon will check every 12 sec (configurable) if counts are monotonically
increasing and record snapshot of those counters. dhcpmon will report
discrepancies when detected between current counters and snapshot counters.
pull-request: https://github.com/Azure/sonic-buildimage/pull/3886
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
This is an addendum to #3958, which also instructs apt to ignore the "Valid Until" date in Release files inside the slave containers, making a complete solution, much like the previously abandoned PR #2609. This patch also unifies file names and contents.
When the Debian team archives a repo, it stops updating the "Valid Until" date, thus apt-get will not apply updates for that repo unless we explicitly tell it to ignore the "Valid Until" date. Also, this has become an issue with active (i.e., non-archived) repos twice in the past year because the Debian folks seem to occasionally let the expiration lapse before updating the date. This will cause SONiC builds to fail with a message like E: Release file for http://debian-archive.trafficmanager.net/debian-security/dists/jessie/updates/InRelease is expired (invalid since 3d 3h 11min 20s). Updates for this repository will not be applied. until the dates have been updated and propagated to all mirrors. With this patch, SONiC should no longer be affected by lapsed "Valid Until" dates, whether they be accidental or purposeful.
* Added sonic-mgmt-framework as submodule / docker
* fix build issues
* update sonic-mgmt-framework submodule branch to master
* Merged changes 70007e6d2ba3a4c0b371cd693ccc63e0a8906e77..00d4fcfed6a759e40d7b92120ea0ee1f08300fc6
00d4fcfed6a759e40d7b92120ea0ee1f08300fc6 Modified environemnt variables
* Changes to build sonic-mgmt-framework docker
* bumped up sonic-mgmt-framework commit-id
* version bump for sonic-mgmt-framework commit-it
* bumped up sonic-mgmt-framework commit-id
* Add python packages to docker
* Build fix for docker with python packages
* added libyang as dependent package
* Allow building images on NFS-mounted clones
Prior to this change, `build_debian.sh` would generate a Debian
filesystem in `./fsroot`. This needs root permissions, and one of the
tests that is performed is whether the user can create a character
special file in the filesystem (using mknod).
On most NFS deployments, `root` is the least privileged user, and cannot
run mknod. Also, attempting to run commands like rm or mv as root would
fail due to permission errors, since the root user gets mapped to an
unprivileged user like `nobody`.
This commit changes the location of the Debian filesystem to `/fsroot`,
which is a tmpfs mount within the slave Docker. The default squashfs,
docker tarball and zip files are also created within /tmp, before being
copied back to /sonic as the regular user.
The side effect of this change is that the contents of `/fsroot` are no
longer available once the slave container exits, however they are
available within the squashfs image.
Signed-off-by: Nirenjan Krishnan <Nirenjan.Krishnan@dell.com>
* bumped up sonc-mgmt-framework commit to include PR #18
* REST Server startup script is enahnced to read the settings from
ConfigDB. Below table provides mapping of db field to command line
argument name.
============================================================
ConfigDB entry key Field name REST Server argument
============================================================
REST_SERVER|default port -port
REST_SERVER|default client_auth -client_auth
REST_SERVER|default log_level -v
DEVICE_METADATA|x509 server_crt -cert
DEVICE_METADATA|x509 server_key -key
DEVICE_METADATA|x509 ca_crt -cacert
============================================================
* Replace src/telemetry as submodule to sonic-telemetry
* Update telemetry commit HEAD
* Update sonic-telemetry commit HEAD
* libyang env path update
* Add libyang dependency to telemetry
* Add scripts to create JSON files for CLI backend
Scripts to create /var/platform/syseeprom and /var/platform/system, which are back-end
files for CLI, for system EEPROM and system information.
Signed-off-by: Howard Persh <Howard_Persh@dell.com>
* In startup script, create directory where CLI back-end files live
Signed-off-by: Howard Persh <Howard_Persh@dell.com>
* build dependency pkgs added to docker for build failure fix
* Changes to fix build issue for mgmt framework
* Fix exec path issue with telemetry
* s5232[device] PSU detecttion and default led state support
* Processing of first boot in rc.local should not have premature exit
Signed-off-by: Howard Persh <Howard_Persh@dell.com>
* docker mount options added for platform, system features
* bumped up sonic-mgmt-framework commit id to pick 23rd July 2019 changes
* Added mount options for telemetry docker to get access for system and platform info.
* Update commit for sonic-utilities
* [dell]: Corrected dport map and renamed config files for S5232F
* Fix telemetry submodule commit
* added support for sonic-cli console
* [Dell S5232F, Z9264F] Harden FPGA driver kernel module
For Dell S5232F and Z9264F platforms, be more strict when checking state
in ISR of FPGA driver, to harden against spurious interrupts.
Signed-off-by: Howard Persh <Howard_Persh@dell.com>
* update mgmt-framework submodule to 27th Aug commit.
* remove changes not related to mgmt-framework and sonic-telemetry
* Revert "Replace src/telemetry as submodule to sonic-telemetry"
This reverts commit 11c3192975.
* Revert "Replace src/telemetry as submodule to sonic-telemetry"
This reverts commit 11c3192975.
* make submodule changes and remove a change not related to PR
* more changes
* Update .gitmodules
* Update Dockerfile.j2
* Update .gitmodules
* Update .gitmodules
* Update .gitmodules
reverting experimental change
* Removed syspoll for release_1.0
Signed-off-by: Jeff Yin <29264773+jeff-yin@users.noreply.github.com>
* Update docker-sonic-mgmt-framework.mk
* Update sonic-mgmt-framework.mk
* Update sonic-mgmt-framework.mk
* Update docker-sonic-mgmt-framework.mk
* Update docker-sonic-mgmt-framework.mk
* Revert "Processing of first boot in rc.local should not have premature exit"
This reverts commit e99a91ffc2.
* Remove old telemetry directory
* Update docker-sonic-mgmt-framework.mk
* Resolving merge conflict with Azure
* Reverting the wrong merge
* Use CVL_SCHEMA_PATH instead of changing directory for telemetry startup
* Add missing export
* Add python mmh3 to slave dockerfile
* Remove sonic-mgmt-framework build dep for telemetry, fix dialout startup issues
* Provided flag to disable compiling mgmt-framework
* Update sonic-utilites point latest commit id
* Point sonic-utilities to Azure accepted SHA
* Updating mgmt framework to right sha
* Add sonic-telemetry submodule
* Update the mgmt-framework commit id
Co-authored-by: jghalam <joe.ghalam@gmail.com>
Co-authored-by: Partha Dutta <51353699+dutta-partha@users.noreply.github.com>
Co-authored-by: srideepDell <srideep_devireddy@dell.com>
Co-authored-by: nirenjan <nirenjan@users.noreply.github.com>
Co-authored-by: Sachin Holla <51310506+sachinholla@users.noreply.github.com>
Co-authored-by: Eric Seifert <seiferteric@gmail.com>
Co-authored-by: Howard Persh <hpersh@yahoo.com>
Co-authored-by: Jeff Yin <29264773+jeff-yin@users.noreply.github.com>
Co-authored-by: Arunsundar Kannan <31632515+arunsundark@users.noreply.github.com>
Co-authored-by: rvasanthm <51932293+rvasanthm@users.noreply.github.com>
Co-authored-by: Ashok Daparthi-Dell <Ashok_Daparthi@Dell.com>
Co-authored-by: anand-kumar-subramanian <51383315+anand-kumar-subramanian@users.noreply.github.com>
In the scope of migration from docker shell plugin to docker connection plugin, we need to have docker-ce-cli installed in docker-sonic-mgmt. Azure/sonic-mgmt#1269
Added docker-ce-cli package to docker-sonic-mgmt.
Put a flag for fast-reboot to the db using EXPIRE feature. Using this flag in other part of SONiC to start in Fast-reboot mode. If we reload a config, the state in the db will be removed.
* adding quotes for string comparison with special characters
* Update dockers/docker-sonic-telemetry/telemetry.sh
Co-Authored-By: Joe LeVeque <jleveque@users.noreply.github.com>
* Update dockers/docker-sonic-telemetry/telemetry.sh
Co-Authored-By: Joe LeVeque <jleveque@users.noreply.github.com>
* start bgp_eoiu_mark service to populate bgp eoiu marker if configured so
* Address code review comments: check db value via "-v" option in sonic-cfggen
* Address code review comment 2: check string against 'true' directly, instead of couting
* Update start.sh
Added python-libpcap to be used by arp_responder.py utility. This is needed to set conf.use_pcap which will make sure that L2pcapListenSocket uses libpcap instead of Linux PF_PACKET sockets. By using libpcap the vlan field will not be removed when the application receives the packet.
* Rename asn/deployment_id_asn_map.yaml to constants/constants.yaml
* Fix bgp templates
* Add community for loopback when bgpd is isolated
* Use correct community value
Now it's possible to add and remove peers based on ConfigDB
- What I did
Fixed functionality for dynamically adding/removing static bgp peers.
- How I did it
Split the bgp default template on bgp part and bgp peer part
Changed bgpcfgd to use 1.
- How to verify it
Build an image and run on your DUT
The owner of the generated files (/etc/frr/*.conf) by start.sh is root if it is a new file.
This will cause error when executing "copy running-config startup-config" in vtysh because of privilege issue.
While doing CLI changes for SNMP configuration, few changes are made in backend to handle the modified CLI.
** Changes**
- "community" for "snmp trap" is also made as "configurable". snmpd_conf.j2 is modified to handle the same.
- Changed the snmp.yml file generation from postStartAction to preStartAction in docker_image_ctl.j2 specific to SNMP docker, to ensure that the snmp.yml is generated before sonic-cfggen generates the snmpd.conf.
- Changed to make the code common for management vrf and default vrf. Users can configure snmp trap and snmp listening IP for both management vrf and default vrf.
* [SNMP] management VRF SNMP support
This commit adds SNMP support for Management VRF using l3mdev.
The patch included provides VRF support, there is no single
"listendevice" configuration, rather multiple agentaddress
config options can each have their own "interface" to bind to
using "ip%interface". The snmpd.conf file is accordingly
generated using the snmp.yml file and redis database info.
Adding below the comments of SNMP patch 1376
--------------------------------------------
Since the Linux kernel added support for Virtual Routing
and Forwarding (VRF) in version 4.3
(Note: these won't compile on non-linux platforms)
https://www.kernel.org/doc/Documentation/networking/vrf.txt
Linux users could not use snmpd in its current form to
bind specific listening IP addresses to specific VRF
devices. A simplified description of a VRF inteface
is an interface that is a master (a container of sorts)
that collects a set of physicalinterfaces to form a
routing table.
This set of two patches (one for V5-7-patches and one
for V5-8-patches branches) is almost identical to patch
single "listendevice" configuration. Rather, multiple
agentAddress config options can each have their own
"interface" to bind to using the <ip>%<interface>
syntax.</interface></ip>
-------------------------------------------
Signed-off-by: Harish Venkatraman <harish_venkatraman@dell.com>
Introduce a new "sflow" container (if ENABLE_SFLOW is set). The new docker will include:
hsflowd : host-sflow based daemon is the sFlow agent
psample : Built from libpsample repository. Useful in debugging sampled packets/groups.
sflowtool : Locally dump sflow samples (e.g. with a in-unit collector)
In case of SONiC-VS, enable psample & act_sample kernel modules.
VS' syncd needs iproute2=4.20.0-2~bpo9+1 & libcap2-bin=1:2.25-1 to support tc-sample
tc-syncd is provided as a convenience tool for debugging (e.g. tc-syncd filter show ...)
Update interfaces of bgpcfd from swsssdk to swsscommon to unify a suit of interface with other component. Meanwhile, we can listen multiple tables at one thread under swsscommon interface.
Signed-off-by: Ze Gan ganze718@gmail.com
- What I did
Move the interface of bgpcfgd from swsssdk to swsscommon. Because bgpcfgd need to listen more events in the future and we want to maintain one kind of APIs, swsscommon is more suitable than swsssdk.
- How I did it
Refactor the BGPConfigDaemon to two components, Daemon and BGPConfigManager. We can register new managers to the Daemon object if we want to listen more events.
this is the first step to moving different databases tables into different database instances
in this PR, only handle multiple database instances creation based on user configuration at /etc/sonic/database_config.json
we keep current method to create single database instance if no extra/new DATABASE configuration exist in database_config.json file.
if user try to configure more db instances at database_config.json , we create those new db instances along with the original db instance existing today.
The configuration is as below, later we can add more db related information if needed:
{
...
"DATABASE": {
"redis-db-01" : {
"port" : "6380",
"database": ["APPL_DB", "STATE_DB"]
},
"redis-db-02" : {
"port" : "6381",
"database":["ASIC_DB"]
},
}
...
}
The detail description is at design doc at Azure/SONiC#271
The main idea is : when database.sh started, we check the configuration and generate corresponding scripts.
rc.local service handle old_config copy when loading new images, there is no dependency between rc.local and database service today, for safety and make sure the copy operation are done before database try to read it, we make database service run after rc.local
Then database docker started, we check the configuration and generate corresponding scripts/.conf in database docker as well.
based on those conf, we create databases instances as required.
at last, we ping_pong check database are up and continue
Signed-off-by: Dong Zhang d.zhang@alibaba-inc.com
* [docker-fpm-frr]: Generate separated staticd.conf for staticd
Generate staticd.conf by templates/staticd.conf.j2 with config DB data
* [docker-fpm-frr]: Remove default_route block from zebra.conf.j2
default_route block already moved to staticd.conf.j2
* [docker-fpm-frr]: Add test for staticd.conf.j2 template
* Add test for staticd.conf.j2 template
* Correct the sample output of zebra.conf.j2 template
* Fix a typo in test_zebra_frr
* [docker-fpm-frr]: Fix test_j2files test errors
* Fix test errors in test_j2files.py and test_j2files_t2_chassis_fe.py
* Fix typo in test_j2files_t2_chassis_fe.py
ARM Architecture support in SONIC
make configure platform=[ASIC_VENDOR_ARCH] PLATFORM_ARCH=[ARM_ARCH]
SONIC_ARCH: default amd64
armhf - arm32bit
arm64 - arm64bit
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* Subscribe to both ConfigDB and AppDB
to get notifications to apply LLDP port config
* the operstate file is not consistent
Removing this since it is not serving any purpose
* Remove check for PortInitDone and PortConfigDone
This is not prteset in Config DB
* Remove checking State DB for port creation
* Check for key to be present before fetching it
* Addressing review comments
* Added debug symbols to many debug dockers.
* For debug images *only*:
1) Archive source files into debug image
2) Archived source is copied into /src
3) Created an empty dir /debug
4) Mount both /src as ro & /debug as rw into every docker
5) Login banner will give some details on /src & /debug
6) Devs can copy core file into /debug and view it from inside a container.
7) Dev may create all gdb logs and other data directly into /debug.
* Dropped redundant REDIS_TOOLS per review comments.
* Added debug symbols to frr package and hence FRR based BGP docker.
* 1) Moved dbg_files.sh to scripts/
2) Src directories to archive are now collected from individual Makefiles.
3) Added few more debug symbols
4) Added few more debug dockers.
Here after no more changes except per review comments.
To debug:
Install required version of debug image in Switch or VM.
Copy core file into /debug of host
Get into Docker
gdb /usr/bin/<daemon> -c /debug/<your core file>
set directory /src/... <-- inside gdb to get the source
For non-in-depth debugging:
Download corresponding debug Docker image (docker-...-dbg.gz) to your VM
Load the image
Run image with entrypoint as 'bash' with dir containing core mapped in.
Run gdb on the core.
- create a dockerfile-marcros.j2 file with all common operations
written as j2 macro
- use single dockerfile instruction for COPY and RUN commands
when possible to improve build time
- reorganize dockerfile instructions to make more cache friendly
(in case someday we will remove --no-cache to build docker images)
Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
This is a follow-up of sonic-snmpagent PR 92
Now that licensing issues have been solved FRR is distributed with SNMP
support compiled-in. This PR adds the last bits of configuration to get
the frr-snmp debian packages added to the docker container and the
config bits to enable the snmp module in FRR
This PR brings the functionality of being able to poll bgpd for routes
and peer status.
Signed-off-by: Michel Moriniaux <m.moriniaux@criteo.com>
* Set the default mac ageing time to 300 seconds
The current mac ageing was disabled, this could lead the mac address
table to increase over time and lead to resource and performance issues.
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
* Update the default HW ageing timer to be 600 seconds.
This is to be on the safer side where ARP update interval
is 300 seconds and SONiC does not flood when ARP is aged out.
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
* Update frr to frr-7.0.1
* Fix a typo
* Set right permissions on /etc/frr
* Convert external file links from debian to Azure
* Revert python3 fix
* Build frr using more than 1 job
* Add SWIG as dependency for libswss-common
* Fix showing systemd shutdown sequence when verbose is set
* Fix creation of kernel-cmdline file
Sometimes boot0 prints error
"mv: can't preserve ownership of '/mnt/flash/image-arsonic.xxxx/kernel-cmdline': Operation not permitted"
* Improve flash space usage during installation
Some older systems only have 2GB of flash available. Installing a second
image on these can prove to be challenging.
The new installation process moves the installer swi to memory in order
to avoid free up space from the flash before uncompressing it there.
It removes all the flash space usage spike and also improves the IO
since the installation is no more reading and writting to the flash at
the same time.
* Add support of 7060CX-32S-SSD
* 7260CX3: use inventory powerCycle procedures
* 7050QX-32S: use inventory powerCycle procedures
* 7050QX-32: use inventory powerCycle procedures
* platform: arista: add common platform_reboot
Replace platform_reboot by a link to new common for devices already
using a similar script.
* 7060CX-32S: use inventory powerCycle procedures
* Install python smbus in pmon
Some platform plugin need the python smbus library to perform some actions.
This installs the dependency.
- use superviord to manage process in frr docker
- intro separated configuration mode for frr
- bring quagga configuration template to frr.
Signed-off-by: Guohan Lu <gulv@microsoft.com>
* [service] Restart SwSS Docker container if orchagent exits unexpectedly
* Configure systemd to stop restarting swss if it attempts to restart more than 3 times in 20 minutes
* Move supervisor-proc-exit-listener script
* [docker-dhcp-relay] Enhance wait_for_intf.sh.j2 to utilize STATEDB
* Ensure dependent services stop/start/restart with SwSS
* Change 'StartLimitInterval' to 'StartLimitIntervalSec', as Stretch installs systemd 232 (>= v230)
* Also update journald.conf options
* Remove 'PartOf' option from unit files
* Add '$(SUPERVISOR_PROC_EXIT_LISTENER_SCRIPT)' to new shared docker-orchagent makefile
* Make supervisor-proc-exit-listener script read from 'critical_processes' file inside container
* Update critical_processes file for swss container
* Base DHCP relay Docker image on Strech base Docker
* Change URL for isc-dhcp source repository
* Upgrade isc-dhcp source branch to 4.3.5-3.1
* Update patch #0001 to apply to isc-dhcp 4.3.5-3.1
* Update patch #0002 to apply to isc-dhcp 4.3.5-3.1
* Update patch #0003 to apply to isc-dhcp 4.3.5-3.1
* Update patch #0004 to apply to isc-dhcp 4.3.5-3.1
* Remove security patches, as they are now applied as part of 4.3.5-3.1 source
* Reorder patches to apply bug fix first, then features
* Extend makefile to build debug Docker image
* Update commit that series file applies against
* Add bridge-utils to orchagent image
- Add vxlanmgrd to supervisorctl in docker -orchagent
Signed-off-by: Ze Gan zegan@microsoft.com
* Update submodule pointer for swss to include Vxlanmgrd changes
Overall goal: Build debug images for every stretch docker.
An earlier PR (#2789) made the first cut, by transforming broadcom/orchagent to build target/docker-orhagent-dbg.gz.
Changes in this PR:
Made docker-orchagent build to be platform independent.
1.1) Created rules/docker_orchagent.mk
1.2) Removed platform//docker-orchagent-*.mk
1.3) Removed the corresponding entry from platform//rules.mk
Extended the debug docker image build to stretch based syncd dockers.
2.1) For now, only mellanox & barefoot are stretch based.
2.2) All the common variable definitions are put in one place platform/template/docker-syncd-base.mk
2.3) platform/[mellanox, bfn]/docker-syncd-[mlnx, bfn].mk are updated as detailed below.
2.3.1) Set platform code and include template base file
2.3.2) Add the dependencies & debug dependencies and any update over what base template offers.
Extended all stretch based non-platform dockers to build debug dockers too.
3.1) Affected are:
docker-database.mk,
docker-platform-monitor.mk,
docker-router-advertiser.mk,
docker-teamd.mk,
docker-telemetry.mk
Next: Build debug flavor of final images with regular dockers replaced with debug dockers where available.
