The marvel-armhf build is hung, it does not exist after waiting for a long time.
It is caused by the process /etc/entropy.py which is started by the postinst script in target/debs/buster/sonic-platform-nokia-7215_1.0_armhf.deb
$ cat postinst
sh /usr/sbin/nokia-7215_plt_setup.sh
...
$ cat usr/sbin/nokia-7215_plt_setup.sh | tail
python /etc/entropy.py &
$ cat etc/entropy.py
if path.exists("/proc/sys/kernel/random/entropy_avail"):
while 1:
while avail() < 2048:
with open('/dev/urandom', 'rb') as urnd, open("/dev/random", mode='wb') as rnd:
d = urnd.read(512)
t = struct.pack('ii', 4 * len(d), len(d)) + d
fcntl.ioctl(rnd, RNDADDENTROPY, t)
time.sleep(30)
It is a workaround to fix the build issue, need to fix debian package, and revert the change.
Support saiserver v2 with python3 and thrift 0.13.0 (Cherry-picked from master #9509)
add variables to support the saiserverv2
build different thrift in saithrift depends on saiserver version
build differernt versions of saiserver
make the saiserver and saiserver docker with version number
test done:
build two different versions of sasiserver in local build environment
Co-authored-by: Richard.Yu <richard.yu@microsoft.com>
202012 version of #10119
Why I did it
If the VLAN interface is not up when ndppd starts, it will fail to enable allmulti mode on the interface and be unable to process received NDP packets
The following logs are seen:
/var/log/syslog.33.gz:Feb 18 10:33:12.825406 sonic INFO swss#/supervisord: ndppd (error) Failed to set allmulti: No such device
How I did it
Use the wait_for_link script currently used by radv to delay ndppd startup until the vlan interface is ready
How to verify it
Apply the changes to a device. config reload the device and confirm that the above error logs are not observed when ndppd starts. Run the arp/test_arp_dualtor.py::test_proxy_arp test case and verify it passes.
- Fixed SAI debian version name issue reported in Marvell sai package file name format issue Marvell-switching/sonic-marvell-binaries#62
- Implement DHCP, DHCv6 traps as per SAI Specifications
- Added support to return SAI_STATUS_NOT_SUPPORTED for ERSPAN feature [Nokia-7215] [marvell] orchagent exited when activating mirror_session #9830
Signed-off-by: Rajkumar Pennadam Ramamoorthy <rpennadamram@marvell.com>
4dc2d0a (HEAD -> 202012, origin/202012) Clear all data from DB table when the daemon stops (#228)
1df28d7 [ycabled] increase UT coverage of ycabled daemon (#238)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
- Why I did it
swsscommon.ConfigDBConnector does not automatically close connection when the instance is recycled by python. So, it should not create this instance each time calling check_services. It will cause error like Failed to read from file /var/run/hw-management/led/led_status_capability - OSError(24, 'Too many open files')
- How I did it
Only connect DB once in init
- How to verify it
Manual test
Why I did it
Desired the log message destination to be syslog and it misses the critical info.
How I did it
Non logical code changes only.
Logging update, just for one message only
a) The log message is directed to /var/log/syslog, instead of /var/log/auth.log
b) Include user alias in the message
How to verify it
Pick a user alias that has not logged into the switch yet
Add this alias to /etc/tacplus_user
Attempt to login as that user
Look for the error message in /var/log/syslog
e.g. "Feb 18 19:16:41.592191 sonic ERR sshd[5233]: auth fail: Password incorrect. user: user_xyz"
Fixes#10020
Why I did it
The platform api for parsing syseeprom information read from STATE DB has issue
with parsing the value part that has whitespace in the middle. The current
code assumes that the value part does not have whitespace. So everything after
the whitespace will be ignored. The syseeprom values returned from platform
API do not match the output of "show platform syseeprom".
How I did it
This change improved the regular expression for parsing syseeprom values to
accommodate whitespaces in the value.
How to verify it
Locally updated the code on a dx010 device. Call the platform API:
```
>>> import sonic_platform
>>> platform = sonic_platform.platform.Platform()
>>> chassis = platform.get_chassis()
>>> chassis.get_system_eeprom_info()
{'0x21': 'DX010', '0x22': 'R0872-F0020-02', '0x23': 'DX010B2F030A27BY200002', '0x24': '00:E0:EC:E7:71:0F', '0x25': '11/03/2020 21:22:56', '0x26': '3', '0x27': 'Seastone', '0x28': 'RANGELEY', '0x29': '2014.08', '0x2A': '131', '0x2B': 'CELESTICA', '0x2C': 'THA', '0x2D': 'Celestica', '0x2E': '1.0.5', '0x2F': 'LB', '0xFD': '', '0xFE': '0xAAB39BDB'}
```
Signed-off-by: Xin Wang <xiwang5@microsoft.com>
* [PTF-SAIv2]Add ptf dockre for sai-ptf (saiv2)
Base on current ptf docker create a new docker for sai-ptf(saiv2)
upgrade related package
use the latest ptf and install it
test done:
NOJESSIE=1 NOSTRETCH=1 NOBULLSEYE=1 ENABLE_SYNCD_RPC=y make target/docker-ptf-sai.gz
BLDENV=buster make -f Makefile.work target/docker-ptf-sai.gz
* upgrade the thrift to 014
When upgrading from an older image (with an older kernel that doesn't
support zstd) to 202012, the squashfs filesystem from the 202012 image
can't be mounted on the older image, because zstd was introduced in
4.14, and older images will likely be running 4.9.
Therefore, disable zstd compression in the squashfs image for 202012
image. When upgrading from 202012 to newer images, since 202012 is
running on 4.19, it can read and mount zstd-compressed squashfs images.
# Why this was done
The kernel in 201811 image (4.9 kernel) doesn't support zstd. In some cases,
it may be needed to mount the squashfs image from the new image while
the current (old) image is booted. If the squashfs image is compressed with
zstd, then it cannot be mounted on a 4.9 kernel, because zstd was introduced
in 4.14.
This reverts commit 35e88e5f6a.
Generate the sai.profile base on the brcm j2 file if the sai.profile
is not existing in the dut mounted folder.
Change the supervisor service configuration accordingly.
Testing done:
Add the script and config in dut
saiservice server can start automatically with [systemctl start saiserver]
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
Add the "always_enabled" field to copp_cfg.j2 file, in order to allow traps without an entry in features table, to be installed automatically.
This is a cherry-pick of https://github.com/Azure/sonic-buildimage/pull/9302
- Why I did it
In order to allow traps without an entry in features table, to be installed automatically.
- How I did it
Add always_enabled field to traps without a feature
This brings in the following commit:
* 15e6f4b0a: Kernel config changes to support cisco platforms [madhava28]
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
Fix some unreliability seen on emmc device with some AMD CPUs
How I did it
Added a kernel parameter to add quirks to
It depends on a sonic-linux-kernel change to work properly but will be a no-op without it.
Description for the changelog
Add emmc quirks for Upperlake
Advance SWSS submodule to include the following commit:
*081dd0118 Handle dual ToR neighbor miss scenario (#2137)
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
This PR updates the following commits in 202012
1f32e5c (HEAD -> 202012, origin/202012) [ycable][credo] Fix the is_link_active API for Credo Ycable (#260)
c249681 [Y-Cable][Credo] add theading locker to support thread-safe calling, add SKU check for download_firmware API. (#222)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
- Why I did it
Update MFT to version 4.18.1-16 for bugs fixes and new SN2201 support
- How I did it
Advance to MFT tool version to 4.18.1-16
- How to verify it
Manually tested on all Mellanox platforms (ASIC FW Upgrade, link debug tools, CPLD upgrade, etc.)
[Build]: Fix hundreds of thousands lines of logs printed in marvell-armhf
It is caused by the bad format of the marvell sai package mrvllibsai_armhf_1.7.1-6.deb, increasing the waiting time to reduce the logs, and reduce the waste of the CPU.
- Why I did it
The chassis name in MSN4410 platform_components.json is not correct
- How I did it
Fix the chassis name
- How to verify it
Run relevant platform API test
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Enable dbgsym package for dhcpmon.
Allow CFLAGS and LDFLAGS from environment variables to be used
in the dhcp6relay build. This makes sure that the -O2 flag from
dpkg-buildflags gets used.
Finally, enable all hardening flags in dpkg-buildflags for
dhcp6relay and dhcpmon. The change from the default set of flags is that
during linking, immediate binding of symbols is done instead of lazy
binding.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Co-authored-by: Saikrishna Arcot <sarcot@microsoft.com>
