* Adjusting FRR's jinja template to meet latest sonic-cfgen requirements. Basically, i'm just extending #448 changes into FRR.
* Eliminate FRR's integrated-config file to prevent daemons from bypassing their own config files. FRR daemons now default to an integrated-config file for config-parsing purposes. But we are still interested in having each daemon looking in their specific config file (bgpd.conf, zebra.conf, etc). So here i'm just deleting this integrating-config file to prevent FRR from running from a bogus config-file.
RB=
G=lnos-reviewers
R=ntrianta,rjonnadu,rmolina,sfardeen,zxu
A=
* [cfggen] Support reading from and writing to configdb
* [bgp] Move bgp_admin_state to configdb, support dynamic admin state change
* [sonic-utilities] Adapt configDB for admin status, support config save and config load
- Update SAI (added support of SN2740 profile).
- Update SDK to version 4.2.3130.
- Update FW to version 13.1224.0140.
- Update HW MGMT to version 1.0.0160.
In Jinja2, '|' cannot be treated directly as piping operator. The
operator precedence of '|' is higher than '*'. The filter only applies
to the value just before it. Group the expression to make sure that the
filter is applied to the outcome of the expression.
Update the unit test to add such case.
* Add docker-dhcp-relay/Dockerfile to .gitignore
* Add isc-dhcp-relay .deb package to image build process, along with my Option 82 patch
* Install custom isc-dhcp-relay in dhcp_relay docker
* Install isc-dhcp-relay build dependencies in sonic-slave Docker container
* Copy the built .deb package to the destination directory
* Add dependencies for isc-dhcp-relay
* Change Option 82 string to '<hostname>:<portname>'
* Install dependencies of .deb files implicitly in Dockerfile
* Remove unused line
* Remove unnecessary space
- arp_update return code is not guaranteed to be true/false.
When there is no VLAN, arp_update will return true.
When there are VLANs, arp_update will return false because the
command arping returns 1 due to the option '-w 0'.
- This script should be run every 5 minutes regardless of the return
code.
* [bgp] Save admin state and set default state to shutdown
* Set default behavior to no shutdown
* Add build option SHUTDOWN_BGP_ON_START
* Script change for default admin state to be on
* Address CR comments to bgp_neighbor script
* Fix script bug
The SNMP subagent implements ipCidrRouteTable. If there is no nexthops
for default route, ie. switch isolated, the SNMP subagent will response
'no instance'. Then snmpd will response kernel routes, which include
non-front panel interfaces. To remove snmpd native implementation, we
only expose SNMP subagent's implementation.
* [docker-teamd]: Explicitly set LAG hwaddr
Team device is initially created without any members and has a random HW
address, which is later changed to port's address. This configuration
sets team device's address explicitly to base MAC to avoid reassignment.
Signed-off-by: marian-pritsak <marianp@mellanox.com>
* Update teamd config tests with hwaddr
Signed-off-by: marian-pritsak <marianp@mellanox.com>
* Align HW addr byte for Centec and Mellanox
Signed-off-by: marian-pritsak <marianp@mellanox.com>
* Change HW addr to unicast in config tests
Signed-off-by: marian-pritsak <marianp@mellanox.com>
- [swss]: Update sairedis/swss/common submodules
- [orchagent]: Mount /var/log folder and use the folder to save recording files
- [orchagent]: Use -d to specify the folder path
- Consolidate config.sh and start.sh scripts into one script (start.sh)
- Solve issue #435 - All dockers now run supervisord as their ENTRYPOINT
- All stdout/stderr output from processes managed by supervisord is now sent to syslog instead of their own files
- Supervisord log messages are now also sent to syslog
- Removed unused smartmontools package from docker-platform-monitor
* replace ping utility from inetutil-ping to iputils-ping
* fix dup typo
* change from package installing to using apt install
* remove unnecessary package handling line
* Remove hard/soft limits for client-output-buffer in redis
Otherwise when we have a lot of updates from orchagent to syncd latter
one can't process queues fast enough and redic-database disconnect both
orchagent and syncd. orchagent and syncd doesn't have logic to deal with
it and just crash
[swss]: Generate config files for Everflow and IPinIP from minigraph
- Add Everflow DST IP to minigraph file
- Extend minigraph.py to support Everflow
- Add templates file for Everflow and IPinIP configuration
- Add config.sh for swss docker to generate config files
* Rename 'ACSFileFormat' -> 'SONiCFileFormat'
* Rename '00-acs.conf' -> '00-sonic.conf'
* Add logrotate.d and systemd-journald config files to image
* Log all SONiC process messages to /var/log/syslog; prevent duplicate logging to /var/log/messages
* Do not redirect cron and daemon logs to their own files, let them log to /var/log/syslog
* Log all teamd messages to /var/log/teamd.log; Add more SONiC program names to SONiC rules clause
* Remove duplicate code by condensing quagga programs into a list; Fix teamd log rule
* Kernel and LPR messages no longer getting duplicated to their own log files
* Now calling logrotate every minute via cron job
* Need full path to logrotate in cron job
* Add '.log' suffix to wildcards, otherwise logrotate will rotate already-rotated logs (e.g., bgpd.log.1.1.1.1.1...)
* Add microsecond granularity to syslog messages
* Don't overwrite system crontab, instead, install additional logrotate crontab file into /etc/cron.d
* Removed incomplete concept of per-process SONiC logs. We can revisit again later
- Extending SONiC building infrastructure to provide users
with greater flexibility, by allowing them to elect a
routing-stack different than the default one (quagga). The desired
routing-stack will be defined in rules/config file.
- As part of these changes I'm adding support for
Free-Range-Routing (FRR) stack. Quagga will continue to be
the default routing-stack.
Signed-off-by: Rodny Molina <rodny@linkedin.com>
* [build]: Include SONiC version into installer.
Signed-off-by: marian-pritsak <marianp@mellanox.com>
* Append dirty if contains local changes
Signed-off-by: marian-pritsak <marianp@mellanox.com>
* Update config
* Use correct name for kernel version field
* Update sysDescription.j2
The reason is that /etc/network/interfaces file is in base image. After booting,
docker-swss is not ready and thus the empty VLAN interfaces cannot be created
when the brctl is pointing to the binary inside the swss docker.
Add the bridge-utils into the base image and add bridge_ports none to the
/etc/network/interfaces file so that after boot-up the empty VLAN interfaces
will be created to let the members to join later.
Signed-off-by: Shuotian Cheng <shuche@microsoft.com>
- Add -p --port-config option to feed sonic-cfggen with port_config.ini
file when necessary.
- Update minigraph.py file to accept the -p option
- Add test_j2files.py test to test config.sh and all .j2 templates
* Currently test_teamd is added to test both the config.sh and teamd.j2
file works well with the t0 sample minigraph and sample port config
file
* The sample output is added to the folder sample_output for comparison
Signed-off-by: Shuotian Cheng <shuche@microsoft.com>
- minigraph_portchannel_interfaces and minigraph_vlan_interfaces are lists
of interfaces and the name could duplicate due to multiple IPs
- Add minigraph_portchannels and minigraph_vlans dictionaries to support
querying port channels and vlans via the name
- Update teamd.j2 template and config.sh file in docker-teamd
- Update zebra.conf.j2 template to add port channel interfaces
Signed-off-by: Shuotian Cheng <shuche@microsoft.com>
* [files]: Add allow-hotplug stanza to interfaces files
- start interface <interface_name> when the kernel detects
a hotplug event from the interface
ref: https://www.debian.org/doc/manuals/debian-reference/ch05.en.html
* [interfaces]: Combine vlan_interfaces and lag_interfaces file and add allow-hotplug
1. Remove vlan_interfaces and lag_interfaces file and members in teamd.j2
2. Add all interfaces to /etc/network/interfaces file
3. Add allow-hotplug stanza
4. Add up <command> to automatically add interfaces to VLAN and LAG
5. Add unique_name filter to minigraph.py to remove duplicate interface names
6. Add brctl to base image
7. Update sonic-swss submodule
Signed-off-by: Shuotian Cheng <shuche@microsoft.com>
This change should be temporary because the current teamd cannot
re-create net devices acrosss restart. Basically, it will fail
when there're files in /var/run/teamd/ folder or the previously
created net devices are still there. Thus, the current workaround
is to remove the obsolete files to restart the docker-teamd.
This workaround cannot resolve the swss restart issue. Before
restarting swss, docker teamd needs to be stopped manually. After
swss starts, docker teamd needs to be restarted manually.
This change will only make sure that rebooting the switch will
make the switch at the correct state.
Signed-off-by: Shuotian Cheng <shuche@microsoft.com>
CMD is not longer a file name but a command that needs to be executed,
thus /bin/bash is not enough for the entrypoint and -c is needed.
Signed-off-by: Shuotian Cheng <shuche@microsoft.com>
* [docker-config-engine]: introduce docker sonic config engine
sonic config engine provide the sonic configure engine for all sonic
dockers that rely on the engine to generate runtime configuration.
* Single image
* Fix review comments
* Update syncd service. Add HW mgmt to Mellanox single image.
* Add single image template for Broadcom platform.
SKU should be provided during configure:
make configure PLATFORM=broadcom SKU=Force10-S6000
* Add single image template for Cavium platform.
SKU should be provided during configure:
make configure PLATFORM=cavium SKU=AS7512
* Add description to sonic_debian_extension.j2 file.
Add a sonic-config-engine to help generate config file based on minigraph and other data on runtime. Modify fpm, teamd, lldp, snmp, and platform-monitor docker to use sonic-config-engine to generate config in docker upon load.
* Build improvements
Fix dependencies
Add configuration options
Automatically build sonic-slave
* Set default number of jobs to 1
* Auto generate target/debs directory
Signed-off-by: marian-pritsak <marianp@mellanox.com>
* Automatically remove sonic-slave container after exit
* Silence clean-logs
* Add SONIC_CLEAN_TARGETS to clean
* Use second expansion for clean dependencies
* Avoid creating empty log files
Remove log file on flush instead of writing empty string
* Put dpkg install inside lock
Use same lock as debian install targets do to avoid
race condition in dpkg installation
* Remove redirect to log from docker save
* Add .platform dependency to all and clean targets
* Remove header and footer from clean targets
* Disable messages for SONIC_CLEAN_TARGETS
* Exit with error if dpkg-buildpackage fails
* Set new location for debs in build_debian.sh
* Add recipe for docker-database
* Update redis version to 3.2.4
* Add support for p4 platform
* Add recipe for snmpd
* Add slave targets to phony and make all target default
* Remove build.sh from thrift
* Add versioning to team, nl, hiredis and initramfs
* Change sonic-slave to support snmpd build from sources
* Remove src/tenjin
* Add recipe for lldpd
* Add recipe for mpdecimal
* Remove hiredis directory on rebuild
* Add recipe for Mellanox hw management
* Remove generic image from all targets for Mellanox
* Add support for python wheels
* Add lldp and snmp dockers
* Sync docker-database to include libjemalloc
* Fix asyncsnmp variable name
* Change default build configuration
Redirect output to log files by default
Set number of jobs to nproc value
Do not print dependencies
Fix logging to print log of failed job into console
* Use docker inspect to check if sonic-slave image exists
* Use config in slave.mk directly
* Disable color output by default
* Remove sswsdk dependency from lldp and snmp dockers
* Fix comment in py wheels install targets
* Add dependency between two versions of sswsdk
* Add containers to mellanox platform
lldp, snmp and database containers
* Add recipe for team docker
* Add team docker to mellanox platform
* Encrypt password passed to build_debian.sh
* Update mellanox SAI version
Make version and revision setting only in main recipe
* Fix error handling in makefiles
As makefiles use .ONESHELL we should add -e
option to shell options in order to exit after any command fails
* Add recipe for platform monitor image
* Add platfotm monitor to mellanox targets
* Ignore submodules when building base image
By default, redis-server is listening on localhost TCP port. This
change will make it also listen to the domain socket (unix socket),
which will have better client-server performance.
Added required docker-team dependency to Makefile to copy dep packages
to dockers/docker-team/deps/ directory. Changed order of deb packages
installation to fix dependency issue.
* Adding support for V2 in SNMP/LLDP (-sv2 postfix)
* Fixes for V1 containers: logging
* Fixes for V1 LLDP: limit LLDP to Front-panel or MGMT interfaces.
* Automatic fw upgrade for mlnx platform
Implement script for firmware upgrade to required version
Add firmware binary and script to ops-syncd-mlnx container
Add pciutils and usbutils to sonic-generic.bin
* Update firmware installation message
It is possible to do both upgrade and downgrade
Change "Upgrading" to "Installing compatible version"
Signed-off-by: marian-pritsak <marianp@mellanox.com>
