build frr dbg image force to install frr in the build process
which breaks the current build and is uneccessary.
Signed-off-by: Guohan Lu <lguohan@gmail.com>
the control file version is 4.2.1.5-7
sonic$ sudo dpkg -i target/debs/buster/libsaibcm-dev_4.2.1.5-8_amd64.deb
(Reading database ... 175880 files and directories currently installed.)
Preparing to unpack .../libsaibcm-dev_4.2.1.5-8_amd64.deb ...
Unpacking libsaibcm-dev (4.2.1.5-7) over (4.2.1.5-7) ...
Setting up libsaibcm-dev (4.2.1.5-7) ...
lgh@491d842369cf:/sonic$ sudo dpkg -i target/debs/buster/libsaibcm_4.2.1.5-8_amd64.deb
(Reading database ... 175880 files and directories currently installed.)
Preparing to unpack .../libsaibcm_4.2.1.5-8_amd64.deb ...
Unpacking libsaibcm (4.2.1.5-7) over (4.2.1.5-7) ...
Setting up libsaibcm (4.2.1.5-7) ...
Processing triggers for libc-bin (2.28-10) ...
Signed-off-by: Guohan Lu <lguohan@gmail.com>
frr build requires libyang 1.0.184 which conflicts with
libyang 1.0.73. Solution here is to compile frr and libyang 1.0.184
first, and then uninstall libyang 1.0.184 after frr build.
Then, compile libyang 1.0.73 and all packages depend on it later.
Signed-off-by: Guohan Lu <lguohan@gmail.com>
in case conflicting packages have same name but different version,
the install step needs to wait till package with the conflicting
version is uninstalled
Signed-off-by: Guohan Lu <lguohan@gmail.com>
Accton util applies lsmod to check if drivers are installed.
But lsmod may return error on startup and skip module installation.
Signed-off-by: Brandon Chuang <brandon_chuang@edge-core.com>
Features:
Spectrum-3 | Systems | Added GA-level support for SN4700 A0 system
All | Shared headroom | Added GA-level support for Shared headroom between PGs
Bugs fixes:
All | Counters | Sent traffic in certain size is wrongly increase to a smaller size counter, because port extended counter has a counter for sent traffic per packet-size range
All | Shared buffer | Configuring shared buffer on the fly may, on occasion, cause the chip to get stuck
Spectrum-2 | Modules | On occasion, link down is experienced with INPHI COLORZ PAM4 100G optic cables on SN3700 systems
Including commits in sonic-swss-common repo:
b423b9c Add support for hexists call (#432) [Tony Titus]
0982996 Remove extension of tableNameSeparatorMap (#430) [Qi Luo]
d16cc76 [build]: add azure pipeline build badge (#429) [lguohan]
f2aaf55 Set up CI with Azure Pipelines (#428) [lguohan]
What: Modify unit test to not call any platform dependent api in test_find_hardware_reboot_cause.
- Why I did it
MELLANOX build is failing for the recent PRs. The errors are due to platform library being invoked in a unit test for determine-reboot-cause script.
Verified by running unit tests and a successful Mellanox build.
Co-authored-by: Vaibhav Hemant Dixit <vadixit@microsoft.com>
Why I did it
To support FG_ECMP scenarios
- How I did it
Modified minigraph parser to parse ECMP fields in the case they are present in minigraph
- How to verify it
Loaded ensuing config_db file on a DUT to verify the fields are parsed and configure device correctly
- Why I did it
Make EEPROM platform APIs Python3 compliant in Nokia platform.
- How I did it
Handle bytearray type returned by read_eeprom and read_eeprom_bytes methods.
- How to verify it
Boot Nokia ixs7215 and verify PMON docker running and show platform syseeprom
Co-authored-by: Carl Keene <keene@nokia.com>
Depending on the performance characteristics of a given hardware platform, it's possible to exceed the default 120 second kernel timeout during I/O intensive operations like image installation. This can cause a kernel panic like so:
kernel:[ 852.441781] Kernel panic - not syncing: hung_task: blocked tasks
If this happens during image installation, it's possible for the install to become corrupted and leave the device in an unreachable state that requires a power cycle to resolve. This risk increases as image size continues to increase. So, we need to increase the timeout so that we don't encounter kernel panics on devices with lower disk throughput.
Signed-off-by: Danny Allen <daall@microsoft.com>
sonic-slave tag only allows all lower case. In case the user
name is mixed case, we need to change user name to all lower case.
Signed-off-by: Guohan Lu <lguohan@gmail.com>
Mellanox already supports multiple destination IPs in IPinIP tunnel configuration, thus removing mellanox
exception for IPinIP configuration.
- How I did it
Removed "dst_ip" field generation in mellanox platform condition.
Sorted the "dst_ip" list, so that it is easier to test against sample configuration in unit tests.
Aligned unit test sample.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
This PR is in preparation to move from snmp.yml to configdb. This will more closely align with other commands in sonic and use configdb as the source of truth for snmp configuration.
Note: This is the first of 2 PR's to enable this. This PR will not change any functionality but will allow the snmp.yml file info to be put into the configdb.
Created a script that takes the snmp.yml variables and converts them to the configdb format.
Added file to dockerfile.j2 so that file is copied in the container.
Updated start.sh file to automatically run the python conversion script each time the docker container is restarted.
frr does not advertise route if local route is not reachable, as a result
loopback route /64 is not advertised to the neighbors. Add static route
allows frr to advertise the route to its peers
Signed-off-by: Guohan Lu <lguohan@gmail.com>
swss/teamd/syncd services were changed to always enabled
in commit fad481edc1 as a workaround
for not letting hostcfgd start service during the bootup process.
commit 317a4b3410 introduce
wait till full system bootup before updating feature states in hostcfgd.
Thus, workaround introduced in commit fad481ed can be removed
Signed-off-by: Guohan Lu <lguohan@gmail.com>
**- Why I did it**
python2 is end of life and SONiC is going to support python3. This PR is going to support:
1. Build pmon daemons with python3
2. Install and run python3 version pmon daemons
**- How I did it**
1. Change pmon daemons make files to build bothe python2 and python3 whl
2. Change docker-platform-monitor make files to install both python2 and python3 whl
3. Change pmon docker startup files to start pmon daemons according to the supported platform API version
Introduce tunnel manager daemon. Start the process as part of swss container
Submodule update for swss:
9ed3026 - 2020-12-24 : [NAT] ACL Rule with DO_NOT_NAT action is getting failed. (#1502) [Akhilesh Samineni]
c39a4b1 - 2020-12-23 : Mux/IPTunnel orchagent changes (#1497) [Prince Sunny]
bc8df0e - 2020-12-23 : Add support for headroom pool watermark (#1567) [Neetha John]
- add config option ENABLE_DOCKER_BASE_PULL to pull sonic-slave docker from registry
- use REGISTRY_PORT, REGISTRY_SERVER to specify docker registry
Signed-off-by: Guohan Lu <lguohan@gmail.com>
**- Why I did it**
As part of migrating SONiC codebase from Python 2 to Python 3
**- How I did it**
- No longer install Python 2 in docker-base-buster or docker-config-engine-buster.
- Install Python 2 and pip2 in the following containers until we can completely eliminate it there:
- docker-platform-monitor
- docker-sonic-mgmt-framework
- docker-sonic-vs
- Pin pip2 version <21 where it is still temporarily needed, as pip version 21 will drop support for Python 2
- Also preform some other cleanup, ensuring that pip3, setuptools and wheel packages are installed in docker-base-buster, and then removing any attempts to re-install them in derived containers
for exmaple, for arm64, the sonic-slave docker image name
is sonic-slave-arm64-$(USER)
for amd64, the docker image is kept as it is
Signed-off-by: Guohan Lu <lguohan@gmail.com>
- Why I did it
scripts/collect_host_image_version_files.sh fails with below error:
scripts/collect_host_image_version_files.sh target ./fsroot
/usr/sbin/chroot: failed to run command 'post_run_buildinfo': No such file or directory
/bin/cp: cannot stat './fsroot/usr/local/share/buildinfo/post-versions': No such file or directory
- How I did it
Issues is because qemu-arm-static is removed before this step. So, I moved the cleanup step to the end.
Signed-off-by: Sabareesh Kumar Anandan <sanandan@marvell.com>
Y* profile is the name pattern for p4 programs that developed for the current platform. The difference between them is features enabled and resource reservation.
For this platform, it is expected to work on any Y profile. but after the latest changes, the first Y profile is always used.
