adding noTLS mode for debugging purpose
Removing config-set for port 8080. It fails to start telemetry if docker restarts in case on noTLS mode because it expects log_level config to be present as well.
This PR updates the following commits
c6b642b [ci]: download from sonic-buildimage.vs artifact (#168)
e76ecc6 [sonic_y_cable] add support for retrieving firmware info for Y cable, internal and nic temperature and voltage (#162)
f9cf8c9 [GitHub] Add pull request template (#167)
c31636e [ci] Call pip2/3 using sudo (#166)
5521f67 [ci] Test and build packages using Azure Pipelines (#164)
faca35c [ci]: Set up CI with Azure Pipelines
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
To have the following fixes:
* All | Port status remains down after warm boot and flapping the port on peer side
* All | LAG HASH | IPv6 SRC_IP is not accounted in LAG hashing [
* All | ASIC driver | Kernel crash observed when driver reload is initiated before it fully loaded
* Spectrum-3 | Buffer | In lossless configuration, headroom is been evicted only when the shared buffers is free
* All | prevent FW access during ISSU
Signed-off-by: Volodymyr Samotiy <volodymyrs@nvidia.com>
- Why I did it
Support shared headroom pool
Signed-off-by: Stephen Sun stephens@nvidia.com
- How I did it
Port configurations for SKUs based on 2700/3800 platform from 201911
For SN3800 platform:
C64: 32 100G down links and 32 100G up links.
D112C8: 112 50G down links and 8 100G up links.
D24C52: 24 50G down links, 20 100G down links, and 32 100G up links.
D28C50: 28 50G down links, 18 100G down links, and 32 100G up links.
For SN2700 platform:
D48C8: 48 50G down links and 8 100G up links
C32: 16 100G downlinks and 16 100G uplinks
Add configuration for Mellanox-SN4600C-D112C8
112 50G down links and 8 100G up links.
- How to verify it
Run regression test.
- What I did
All SWSS dependent services should stop before SWSS service to avoid future possible issues.
For example 'teamd' service will stop before to allow the driver unload netdev gracefully.
This is to stop all LAG's before restarting syncd service when running 'config reload' command.
- How I did it
Change the order of dependent services of SWSS.
- How to verify it
Run 'config reload' command.
Previously the operation failed when a large number of PortChannel configured on the system.
Signed-off-by: Shlomi Bitton <shlomibi@nvidia.com>
* Add *MUX_CABLE_TABLE* to set of tables to clear on SWSS start, which
will clear HW_MUX_CABLE_TABLE and MUX_CABLE_TABLE
* Order swss to start before pmon to ensure that DBs are cleared before
xcvrd (running inside pmon) starts and re-populates the tables
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
Commits include:
* src/sonic-utilities c7e46c9...42cab68 (3):
> [consutil] Look for udevprefix.conf file under platform dir, not plugins (#1431)
> [ci]: download from sonic-buildimage.vs artifact (#1428)
> [storyteller] sort output by time and improve lag support (#1430)
Azure/sonic-utilities#1431 changes the path to the udevprefix.conf file. The file previously inappropriately resided in the <platform>/plugins/ directory. That directory is reserved for now-deprecated Python platform plugins, and will be removed in the near future.
Fix marvell-armhf build break
The azure-storage package depends on the cryptography package. Newer
versions of cryptography require the rust compiler, the correct version
for which is not readily available in buster. Hence we pre-install an
older version here to satisfy the azure-storage dependency.
Note: This is not a problem for other architectures as pre-built versions
of cryptography are available for those. This sequence can be removed
after upgrading to debian bullseye.
- Introduced TS common file in docker as well and moved common functions.
- TSA/B/C scripts run only in BGP instances for front end ASICs.
In addition skip enforcing it on route maps used between internal BGP sessions.
admin@str--acs-1:~$ sudo /usr/bin/TSA
System Mode: Normal -> Maintenance
and in case of Multi-ASIC
admin@str--acs-1:~$ sudo /usr/bin/TSA
BGP0 : System Mode: Normal -> Maintenance
BGP1 : System Mode: Normal -> Maintenance
BGP2 : System Mode: Normal -> Maintenance
This PR is needed to fix the show interface counters output issue where the counters are not correct due to an issue introduced in BRCM SAI 4.3.
- How to verify it
Without the fix if one injects packets, the expected counters for the interfaces involved do not show correct count values. The RX count looks to be TX count while TX count looks to be RX count but even that the values could not be trusted.
After the fix the counters started to look correct. Here is one sample output taken after the fix is applied where I manually injected 10,000 packets into Ethernet92 to be routed out of the port channel member port Ethernet40. Also injected 10,000 invalid packets into the same Ethernet92 and all 10,000 packets were shown RX_DRP correctly.
sonic-utilities 28d358f...f5b8a1e (22):
> Fix deprecation warnings (#1423)
> Fix: initialize SonicDBConfig differently for single or multi_asic (continued) (#1417)
> [multi-asic] show ip interface changes for multi asic (#1396)
> [show mux]: Sort output by intf name (#1418)
> [ci] Test and build package using Azure Pipelines (#1406)
> [GitHub] Tweak PR and issue templates (#1419)
> Import 'mock' module from 'unittest' library (#1415)
> Revert "Add FW dump with new SAI implementation (#1338)" (#1407)
> [config reload]: Restart macsec container (#1410)
> [pcieutil] Remove the warning message and change the config file location (#1362)
> Fix: initialize SonicDBConfig differently for single or multi_asic (#1409)
> Support shared headroom pool on top of dynamic buffer calculation (#1348)
> Fix unsupported fs.squashfs extraction in sonic-installer (#1366)
> [show] Use proper variable to avoid exception in natshow script (#1383)
> Set up CI with Azure Pipelines
> [config reload]: Restart mux container (#1401)
> Advertise ipv6 link local address (#1402)
> [storyteller] Enhance the storyteller utility (#1400)
> [show] Fix int status when portchannel is in the system (#1376)
> [config][show] cli support for retrieving ber, eye-info and configuring prbs, loopback on Y-cable (#1386)
> Skip route check for tun0 interfaces (#1399)
> do not parse stderr to get correct routing stack (#1398)
> [storyteller] allow storyteller to work on downloaded logs (#1388)
> [vrf]: Fix freezing during interface binding (#1325)
> Use SonicV2Connector/ConfigDBConnector/SonicDBConfig from swsscommon instread of swsssdk (#1392)
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
- Why I did it
Enable platform API tests to run successfully by providing required test infrastructure files along with supporting changes.
- How I did it
Added platform.json along with supporting changes.
- Addition of pcie.yaml supporting pcied
- Addition of Real fan drawer support vs Virtual
- Removal of python2 wheel with support in place for python3
- supporting changes platform api tests
platform modules' deb package rules for x86_64-accton_wedge100bf_65x-r0 was missing the code that installs the sonic_platform wheel package file under device directory on host (which is checked by pmon deamon on start)
**- Why I did it**
To support FW upgrade on init.
**- How I did it**
Change timeout value
**- How to verify it**
I manually changed ASIC and Gearbox FW followed by hard reset in order for FW upgrade to take place on init.
Signed-off-by: liora <liora@nvidia.com>
Merged bcmsai 4.3.0.13 code to top of master bcmsai 4.3.0.10-5.
- How to verify it
Ran nightly regression on T0 and T1 topology using bcmsai 4.3.0.13. Test results are better than previous runs.
For T0 -
New test passing - CRM, Decap, FDB, platform test, VxLAN
New test failing – PFC unknown MAC
For T1 –
New test passing – Port Channel
New test failing – platform test
Include SAI bug fixes:
- Apply device MAC on port host interface when port is removed from LAG.
- [Shared Headroom]: fixed watermark handling for SHP flow
- Decrease verbosity of policer unbind message when no policer is attached
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
This PR is to fix issue: #6603
The CP210x driver not attached properly after first login (cold-plug), lsusb and dmesg shown that the usb devices has been recognized but driver is missing.
Submodule commits included:
* src/sonic-platform-common 6ad0004...bd4dc03 (1):
> [sonic_sfp/qsfp_dd.py] Update DOM capability method name to align with other drivers (#163)
Also align all calling function names to match.
When Building syncd-rpc, libthrift has dependency on libboost-atomic1.71.0,
however the debian packager install version 1.67 instead. This PR
preinstalls libboost-atomic v 1.71 to avoid falling back to v 1.67.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
- Why I did it
To move ‘sonic-host-service’ which is currently built as a separate package to ‘sonic-host-services' package.
- How I did it
- Moved 'sonic-host-server' to 'src/sonic-host-services' and included it as part of the python3 wheel.
- Other files were moved to 'src/sonic-host-services-data' and included as part of the deb package.
- Changed build option ‘INCLUDE_HOST_SERVICE’ to ‘ENABLE_HOST_SERVICE_ON_START’ for enabling sonic-hostservice at boot-up by default.
ACL entry set attribute updates all the entries in the table. The correct behavior is to set the attribute on single entry.
- How I did it
Current SDK code, while setting the new attribute, is going through all the entries and updating it. Added a logic to check for requested entry and only allow for that ACL entry.
A case has filed with BRCM. Once an official fix is provided by BRCM, we will then remove this in house fix and apply the official fix.
Fix#6711
the requirement was introduced in commit 75104bb35d
to support sflow in stretch build. in buster build, the requirement
is met, no need to pin down the version.
Signed-off-by: Guohan Lu <lguohan@gmail.com>
