**- Why I did it**
On teamd docker restart, the swss and syncd needs to be restarted as there are dependent resources present.
**- How I did it**
Add the teamd as a dependent service for swss
Updated the docker-wait script to handle service and dependent services separately.
Handle the case of warm-restart for the dependent service
**- How to verify it**
Verified the following scenario's with the following testbed
VM1 ----------------------------[DUT 6100] -----------------------VM2, ping traffic continuous between VMs
1. Stop teamd docker alone
> swss, syncd dockers seen going away
> The LAG reference count error messages seen for a while till swss docker stops.
> Dockers back up.
2. Enable WR mode for teamd. Stop teamd docker alone
> swss, syncd dockers not removed.
> The LAG reference count error messages not seen
> Repeated stop teamd docker test - same result, no effect on swss/syncd.
3. Stop swss docker.
> swss, teamd, syncd goes off - dockers comes back correctly, interfaces up
4. Enable WR mode for swss . Stop swss docker
> swss goes off not affecting syncd/teamd dockers.
5. Config reload
> no reference counter error seen, dockers comes back correctly, with interfaces up
6. Warm reboot, observations below
> swss docker goes off first
> teamd + syncd goes off to the end of WR process.
> dockers comes back up fine.
> ping traffic between VM's was NOT HIT
7. Fast reboot, observations below
> teamd goes off first ( **confirmed swss don't exit here** )
> swss goes off next
> syncd goes away at the end of the FR process
> dockers comes back up fine.
> there is a traffic HIT as per fast-reboot
8. Verified in multi-asic platform, the tests above other than WR/FB scenarios
**- Why I did it**
If we ran the CLI commands `sudo config feature autorestart snmp disabled/enabled` or `sudo config feature autorestart swss disabled/enabled`, then SNMP container will be stopped and started. This behavior was not expected since we updated the `auto_restart` field not update `state` field in `FEATURE` table. The reason behind this issue is that either `state` field or `auto_restart` field was updated, the function `update_feature_state(...)` will be invoked which then starts snmp.timer service.
The snmp.timer service will first stop snmp.service and later start snmp.service.
In order to solve this issue, the function `update_feature_state(...)` will be only invoked if `state` field in `FEATURE` table was
updated.
**- How I did it**
When the demon `hostcfgd` was activated, all the values of `state` field in `FEATURE` table of each container will be
cached. Each time the function `feature_state_handler(...)` is invoked, it will determine whether the `state` field of a
container was changed or not. If it was changed, function `update_feature_state(...)` will be invoked and the cached
value will also be updated. Otherwise, nothing will be done.
**- How to verify it**
We can run the CLI commands `sudo config feature autorestart snmp disabled/enabled` or `sudo config feature autorestart swss disabled/enabled` to check whether SNMP container is stopped and started. We also can run the CLI commands `sudo config feature state snmp disabled/enabled` or `sudo config feature state swss disabled/enabled` to check whether the container is stopped and restarted.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
When a large number of changes occur to the ACL table of Config DB, caclmgrd will get flooded with notifications, and previously, it would regenerate and apply the iptables rules for each change, which is unnecessary, as the iptables rules should only get applied once after the last change notification is received. If the ACL table contains a large number of control plane ACL rules, this could cause a large delay in caclmgrd getting the rules applied.
This patch causes caclmgrd to delay updating the iptables rules until it has not received a change notification for at least 0.5 seconds.
* Optimze ACL Table/Rule notifcation handling
to loop pop() until empty to consume all the data in a batch
This wau we prevent multiple call to iptable updates
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Address review comments
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
any event happening on ACL Rule Table (eg DATAACL rules
programmed) caused control plane default action to be triggered.
Now Control Plance ACTION will be trigger only
a) ACL Rule beloging to Control ACL Table
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
implements a new feature: "BGP Allow list."
This feature allows us to control which IP prefixes are going to be advertised via ebgp from the routes received from EBGP neighbors.
To address issue #5525
Explicitly control the grub installation requirement when it is needed.
We have scenario where configuration migration happened but grub
installation is not required.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* [platform] Add Support For Environment Variable
This PR adds the ability to read environment file from /etc/sonic.
the file contains immutable SONiC config attributes such as platform,
hwsku, version, device_type. The aim is to minimize calls being made
into sonic-cfggen during boot time.
singed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
implements a new feature: "BGP Allow list."
This feature allows us to control which IP prefixes are going to be advertised via ebgp from the routes received from EBGP neighbors.
redis-py 3.0 used in master branch only accepts user data as bytes,
strings or numbers (ints, longs and floats). Attempting to specify a key
or a value as any other type will raise a DataError exception.
This PR address the issue bt converting datetime to str
* [Multi-Asic] Forward SNMP requests destined to loopback IP, and coming in through the front panel interface
present in the network namespace, to SNMP agent running in the linux host.
* Updates based on comments
* Further updates in docker_image_ctl.j2 and caclmgrd
* Change the variable for net config file.
* Updated the comments in the code.
* No need to clean up the exising NAT rules if present, which could be created by some other process.
* Delete our rule first and add it back, to take care of caclmgrd restart.
Another benefit is that we delete only our rules, rather than earlier approach of "iptables -F" which cleans up all rules.
* Keeping the original logic to clean the NAT entries, to revist when NAT feature added in namespace.
* Missing updates to log_info call.
buffer_default_*.j2 because of which internal cable length never gets
define and cause failure in test case test_multinpu_cfggen.py
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
Co-authored-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
We want to let Monit to unmonitor the processes in containers which are disabled in `FEATURE` table such that
Monit will not generate false alerting messages into the syslog.
- Backport of https://github.com/Azure/sonic-buildimage/pull/5153 to the 201911 branch
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* Enhanced Feature Table state enable/disbale for multi-asic platforms.
In Multi-asic for some features we can service per asic so we need to
get list of all services.
Also updated logic to return if any one of systemctl command return failure
and make sure syslog of feature getting enable/disable only come when
all commads are sucessful.
Moved the service list get api from sonic-util to sonic-py-common
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
* Make sure to retun None for both service list in case of error.
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
* Return empty list as fail condition
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
* Address Review Comments.
Made init_cfg.json.j2 knowledegable of Feature
service is global scope or per asic scope
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
* Fix merge conflict
* Address Review Comment.
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
Co-authored-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
for ipv6 communication between container and host in multi-asic
platforms. Address is assign is private address space of fd::/80
with prefix len selected as 80 so that last 48 bits can be
container mac address and and you prevent NDP neighbor cache
invalidation issues in the Docker layer.
Ref: https://docs.docker.com/config/daemon/ipv6/
Ref:https://medium.com/@skleeschulte/how-to-enable-ipv6-for-docker-containers-on-ubuntu-18-04-c68394a219a2
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
Co-authored-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
communication on docker eth0 ip . Without this TCP Connection to Redis
does not happen in namespace.
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
Co-authored-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
management framework provides management plane services like rest and
CLI which is not needed right after boot, instead by delaying this
service we give some more CPU for data plane and control plane services
on fast/warm boot.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
sonic-cfggen is now using Unix Domain Socket for Redis DB. The socket
is created using root account. Subsequently, services that are started
as admin fails to start. This PR creates redis group and add admin
user to redis group. It also grants read/write access on redis.sock
for redis group members.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
on sonic-swss-common
With the change as part of #378 caclmgrd need to be updated
to use new client side Get API to access namespace.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
New attribute 'has_timer' introduced to init_cfg.json does not evaluate
as Bool, rather it evaluates as string. This PR fixes this issue. Also,
this PR fixes an issue when there is system config unit (snmp, telemetry) that
has no installation config (WantedBy=, RequiredBy=, Also=, Alias=) settings
in the [Install] section. In the latter case, the .service should not be enabled.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
The first partition starting point was changed to be 1M as part of this
commit: 6ba2f97f1e. On systems that are misaligned before conversion
(partition start is the first sector), the relica partition that is
left in the first MB can cause problems in Aboot and result in corruption
of the filesystem on the new aligned partition.
Zeroing this old relica makes sure that there is nothing left of the old
partition lying around. There won't be any risk of having Aboot corrupt
the new filesystem because of the old relica.
Signed-off-by: Baptiste Covolato <baptiste@arista.com>
Commit e484ae9dd introduced systemd .timer unit to hostcfgd.
However, when stopping service that has timer, there is possibility that
timer is not running and the service would not be stopped. This PR
address this situation by handling both .timer and .service units.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
startup when doing redis PING since database_config.json getting
generated from jinja2 template is still not ready.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
SNMP and Telemetry services are not critical to switch startup.
They also cause fast-reboot not to meet timing requirements.
In order to delay start those service are associated with systemd
timer units, however when hostcfgd initiate service start, it start
the service and not the timer. This PR fixes this issue by
starting the timer associated with systemd unit.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
* Support for Control Plane ACL's for Multi-asic Platforms.
Following changes were done:
1) Moved from using blocking listen() on Config DB to the select() model
via python-swsscommon since we have to wait on event from multiple
config db's
2) Since python-swsscommon is not available on host added libswsscommon and python-swsscommon
and dependent packages in the base image (host enviroment)
3) Made iptables programmed in all namespace using ip netns exec
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Address Review Comments
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Fix Review Comments
* Fix Comments
* Added Change for Multi-asic to have iptables
rules to accept internal docker tcp/udp traffic
needed for syslog and redis-tcp connection.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Fix Review Comments
* Added more comments on logic.
* Fixed all warning/errors reported by http://pep8online.com/
other than line > 80 characters.
* Fix Comment
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Verified with swsscommon package. Fix issue for single asic platforms.
* Moved to new python package
* Address Review Comments.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Address Review Comments.
As part of consolidating all common Python-based functionality into the new sonic-py-common package, this pull request:
1. Redirects all Python applications/scripts in sonic-buildimage repo which previously imported sonic_device_util or sonic_daemon_base to instead import sonic-py-common, which was added to the 201911 branch in https://github.com/Azure/sonic-buildimage/pull/5063
2. Replaces all calls to `sonic_device_util.get_platform_info()` to instead call `sonic_py_common.get_platform()` and removes any calls to `sonic_device_util.get_machine_info()` which are no longer necessary (i.e., those which were only used to pass the results to `sonic_device_util.get_platform_info()`.
3. Removes unused imports to the now-deprecated sonic-daemon-base package and sonic_device_util.py module
This is a step toward resolving https://github.com/Azure/sonic-buildimage/issues/4999
that cherry-pick PR#5081 ICCPD feature got include din 201911
which is not needed so removed it back
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
1. remove container feature table
2. do not generate feature entry if the feature is not included
in the image
3. rename ENABLE_* to INCLUDE_* for better clarity
4. rename feature status to feature state
5. [submodule]: update sonic-utilities
* 9700e45 2020-08-03 | [show/config]: combine feature and container feature cli (#1015) (HEAD, origin/master, origin/HEAD) [lguohan]
* c9d3550 2020-08-03 | [tests]: fix drops_group_test failure on second run (#1023) [lguohan]
* dfaae69 2020-08-03 | [lldpshow]: Fix input device is not a TTY error (#1016) [Arun Saravanan Balachandran]
* 216688e 2020-08-02 | [tests]: rename sonic-utilitie-tests to tests (#1022) [lguohan]
Signed-off-by: Guohan Lu <lguohan@gmail.com>
Removes installation of kube-proxy (117 MB) and flannel (53 MB) images from Kubernetes-enabled devices. These images are tested to be unnecessary for our use case, as we do not rely on ClusterIPs for Kubernetes Services or a CNI for pod networking.
Fix for the host unmount issue through PR https://github.com/Azure/sonic-buildimage/pull/4558 and https://github.com/Azure/sonic-buildimage/pull/4865 creates the timeout of syslog.socket closure during reboot since the journald socket closure has been included in syslog.socket
Removed the journal socket closure. The host unmount is fixed with just stopping the services which gets restarted only after /var/log unmount and not causing the unmount issues.
Consolidate common SONiC Python-language functionality into one shared package (sonic-py-common) and eliminate duplicate code.
The package currently includes four modules:
- daemon_base
- device_info
- logger
- task_base
NOTE: This is a combination of all changes from https://github.com/Azure/sonic-buildimage/pull/5003, https://github.com/Azure/sonic-buildimage/pull/5049 and some changes from https://github.com/Azure/sonic-buildimage/pull/5043 backported to align with the 201911 branch. As part of the 201911 port, I am not installing the Python 3 package in the base image or in the VS container, because we do not have pip3 installed, and we do not intend to migrate to Python 3 in 201911.
* Changes to add template support for copp.json.
This is needed so that we can install differnt type of
Traps based on Device Role (Tor/Leaf/Mgmt/etc...).
Initial use case is to install DHCP/DHCPv6 tarp only
for tor router.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Fixed based on review comments.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Fixed based on review comment.
* Defect 2082949: Handling Control Plane ACLs so that IPv4 rules and IPv6 rules are not added to the same ACL table
* Previous code review comments of coming up with functions for is_ipv4_rule and is_ipv6_rule is addressed and also raising Exceptions instead of simply aborting when the conflict occurs is handled
* Addressed code review comment to replace duplicate code with already existing functions
* removed raising Exception when rule conflict in Control plane ACLs are found
* added code to remove the rule_props if it is conflicting ACL table versioning rule
* addressed review comment to add ignoring rule in the error statement
Co-authored-by: Madhan Babu <madhan@arc-build-server.mtr.labs.mlnx>
Otherwise, it may cause issues for warm restarts, warm reboot.
Warm restart of swss will start nat which is not expected for warm
restart. Also it is observed that during warm-reboot script execution
nat container gets started after it was killed. This causes removal of
nat dump generated by nat previously:
A check [ -f /host/warmboot/nat/nat_entries.dump ] || echo "NAT dump
does not exists" was added right before kexec:
```
Fri Jul 17 10:47:16 UTC 2020 Prepare MLNX ASIC to fastfast-reboot:
install new FW if required
Fri Jul 17 10:47:18 UTC 2020 Pausing orchagent ...
Fri Jul 17 10:47:18 UTC 2020 Stopping nat ...
Fri Jul 17 10:47:18 UTC 2020 Stopped nat ...
Fri Jul 17 10:47:18 UTC 2020 Stopping radv ...
Fri Jul 17 10:47:19 UTC 2020 Stopping bgp ...
Fri Jul 17 10:47:19 UTC 2020 Stopped bgp ...
Fri Jul 17 10:47:21 UTC 2020 Initialize pre-shutdown ...
Fri Jul 17 10:47:21 UTC 2020 Requesting pre-shutdown ...
Fri Jul 17 10:47:22 UTC 2020 Waiting for pre-shutdown ...
Fri Jul 17 10:47:24 UTC 2020 Pre-shutdown succeeded ...
Fri Jul 17 10:47:24 UTC 2020 Backing up database ...
Fri Jul 17 10:47:25 UTC 2020 Stopping teamd ...
Fri Jul 17 10:47:25 UTC 2020 Stopped teamd ...
Fri Jul 17 10:47:25 UTC 2020 Stopping syncd ...
Fri Jul 17 10:47:35 UTC 2020 Stopped syncd ...
Fri Jul 17 10:47:35 UTC 2020 Stopping all remaining containers ...
Warning: Stopping telemetry.service, but it can still be activated by:
telemetry.timer
Fri Jul 17 10:47:37 UTC 2020 Stopped all remaining containers ...
NAT dump does not exists
Fri Jul 17 10:47:39 UTC 2020 Rebooting with /sbin/kexec -e to
SONiC-OS-201911.140-08245093 ...
```
With this change, executed warm-reboot 10 times without hitting this
issue, while without this change the issue is easily reproducible almost
every warm-reboot run.
Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
