This PR for submodule update adds the following commits
ce51894 [Y-Cable] add the definition inside setup.py to include sonic_y_cable.credo as a package (#211)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Why I did it
[DPB] BGP_NEIGHBOR yang model causing DPB errors.
How I did it
Allowed the BGP_NEIGHBOR list with just IP as the key to allow the current BGP neighbor table in the community.
How to verify it
Built the SONIC YANG models.
d8ca31c (origin/master, origin/HEAD, master) [vnet/vxlan] Add support of multiple mappers for the VxLAN tunnel (#1843)
7280e19 [orchagent][ports] Add port reference increment / decrement to lag member add / remove flows (#1825)
0217b66 [nhg]: Add support for weight in nexthop group member. (#1853)
df96059 VOQ: Nexthop for remote VOQ LC should be created on inband OIF. (#1823)
8f7ea14 Code changes to support IPv6 Link local enhancements (#1463)
8674b3c Open record file in append mode (#1845)
Signed-off-by: Andriy Yurkiv <ayurkiv@nvidia.com>
enable automated test suites to selectively run relevant tests ( or not run tests ) based upon a new port_type identifier in hwsku.json
How I did it
Modified the valid optional fields in validity check for hwsku.json per recommendation from Joe in
https://github.com/Azure/sonic-mgmt/pull/2654/files
Co-authored-by: Carl Keene <keene@nokia.com>
Signed-off-by: Rajkumar Pennadam Ramamoorthy rpennadamram@marvell.com
Why I did it
Install sonic image from ONIE. Once system is up, execute "config reload" command.
Root cause is that "determine-reboot-cause.service" was in failed state.
root@sonic:/host/reboot-cause# systemctl list-units --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
● determine-reboot-cause.service loaded failed failed Reboot cause determination service
How I did it
Fixed the issue by setting default reason to "REBOOT_CAUSE_UNKNOWN" instead of "None".
How to verify it
Check " determine-reboot-cause.service' loaded successfully post image installation from ONIE.
Verify "reboot-cause.txt" file is created and config reload succeeds.
#### Why I did it
hostcfgd is starting at the same time as 'create_switch' method is called on orchagent process.
This introduce a degradation on the function execution time which eventually cause the fast-boot flow and a boot scenarion in general to run slower (~6 seconds).
This change will delay the start time of this daemon.
The aaastatsd will delay as well since it has a dependency on hostcfgd, so it is required to delay both.
90 seconds determined as the maximum allowed downtime for control plane to come back up on fast-boot flow.
#### How I did it
Add two timers for hostcfgd and aaastatsd services in order to delay the startup of these services.
#### How to verify it
Install an image with this change and observe the daemons start 90 seconds after the system boot.
This PR updates the following commits
cd3cca7 [Y-Cable][Credo] Credo implementation of YCable class which inherits from YCableBase required for Y-Cable API's in sonic-platform-daemons (#203)
bd694b2 Load interval from thermal_policy.json (#178)
c43dc17 [sonic_y_cable] add abstract class YCableBase required for Y-cable API support for multiple vendors (#186)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
* Update default cable len to 0m for TD2 (#8298)
* Update sonic-cfggen tests with the correct cable len
Signed-off-by: Neetha John <nejo@microsoft.com>
As part of the buffer reclamation efforts for TD2, setting the default cable len to 0m which means unused ports will have a cable len of 0m.
Why I did it
To align with the changes in Azure/sonic-swss#1830
How to verify it
- With the default cable len set to 0m and the associated changes in swss, CABLE_LENGTH table had '0m' set for unused ports and accordingly more space was reserved for the shared pool
- Cfggen tests passed with the cable len update
#### Why I did it
Remove the call to `SonicDBConfig.load_sonic_global_db_config()` in the multi asic functions.
The expection is the client calling this function will call `SonicDBConfig.load_sonic_global_db_config()`
This PR is dependent on the PR https://github.com/Azure/sonic-utilities/pull/1712
#### How to verify it
compile sonic-utilities
This PR is to update sonic-utilities for master branch
Changes including
```
54b74a2 [LLDP] Fix lldpshow script to enable display multiple MAC addresses on the same remote physical interface (#1657)
0d53b7a [sonic_installer] don't print errors when installing an image not supporting app ext (#1719)
394e2fb Implement script null_route_helper (#1737)
```
Signed-off-by: bingwang <bingwang@microsoft.com>
Included commits:
* dd01b56 disk_check updates:
* 8a74d03 [CLI][show][bgp] Fix the show ip bgp network command
* 679a4ba [MACsec]: Allow upgrade-docker for macsec container
* e9c73e8 [CLI][MPLS][Show] Added multi ASIC support for 'show mpls command'.
I have been seeing intermittent (~40%) build failures with the same error described in PR https://github.com/Azure/sonic-buildimage/pull/6592, even with that fix present
```
/usr/bin/ld: mibgroup/ip-forward-mib/ipCidrRouteTable/.libs/ipCidrRouteTable_interface.o: file not recognized: file truncated
...
libtool: error: 'mibgroup/ip-forward-mib/inetCidrRouteTable/inetCidrRouteTable_interface.lo' is not a valid libtool object
make[5]: *** [Makefile:1020: libnetsnmpmibs.la] Error 1
make[5]: *** Waiting for unfinished jobs....
```
#### How I did it
Use `-j1` for the libsnmp build regardless of the value of `$(MULTIARCH_QEMU_ENVIRON)`
#### How to verify it
Performed 10 builds of the libsnmp target (`target/debs/buster/libsnmp-base_5.7.3+dfsg-5_all.deb`) with and without this change. Without the change, hit the error 40% of the time. With the change did not see the error at all
Signed-off-by: Justin Sherman <jusherma@cisco.com>
0443e66050256a87f8e92db7cd3c36cc139ebe14 (HEAD -> master, origin/master, origin/HEAD) Remove DB Directory removal as part of make clean (#84)
085f29d1247f0333e6038751fa445b6068fcf987 Fix unhandled nil err check to prevent rpc causing a crash (#78)
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
The unit test failure was due to missing bgp graceful restart select
defer time configuration in voq_chassis.conf. Modified sample output
data file voq_chassis.conf to include this configuration.
Signed-off-by: vedganes <vedavinayagam.ganesan@nokia.com>
For multiasic, the back end asics use ip addresss of Loopback4096 for BGP router id. In VOQ multi-asic chassis there are no back end asics. All the asics are front end and the iBGP connections are established via Ethernet-IB of asics. Since these asics are not designated as BackEnd, the ip address of interface Loopback0 is used as BGP router id. Since the ip address of Loopback0 is same for all the asics in the line card, same router id is used for voq iBGP configurations and hence the iBGP connections are not established. Changes are done to fix this
Why I did it
In the config_db.json generated by minigraph "admin_status" attribute is missing for the VOQ inband interface port in the PORT table.
How I did it
Changes done to add admin_status attribute for voq inband interface port, if it exists in the PORT table keys.
Why I did it
There are scenarios that End-of-RIB comes from a part of the peers arrives after reconciliation. In such scenarios, if the route selection deferral timer has the default value of 360 seconds, FRR would not set up routes and all routes would be removed after reconciliation. This PR reduces the route selection deferral timer so that at least routes to parts of the peers get restored at the point of reconciliation.
Fix#7488
How I did it
Reduce route selection deferral timer for bgp graceful restart to 15 seconds.
#### Why I did it
Enhance DHCP monitor application following the implementation PR: https://github.com/Azure/sonic-buildimage/pull/7772
#### How I did it
Add the support for monitoring DHCPv6 packets.
#### How to verify it
Install an image with this PR and the implementation PR.
Update sonic-sairedis submodule to include below commits:
84fa50a Revert "[vs]: Start syncd by passing context configuration file and global context index. (#832)" (#859)
736dc3b Remove redudnant mention of platform cisco-8000 (#856)
969ad94 Support for cisco-8000 platform for sonic-sairedis/syncd (#823)
1eacd05 [sairedis] Client/Server add support for SAI stats api (#855)
59fedfa [sairedis] Client/Server support SAI fdb flush api (#853)
5c2aaae [syncd] bulk OID remove requires RID (#854)
7da0894 [sairedis] Client/Server support SAI query API (#848)
443ad36 [sairedis] Style refactor cleanup (#850)
Signed-off-by: Suvarna Meenakshi <sumeenak@microsoft.com>
lazy_re had an issue when importing sonic-cfggen in another application that
uses re.search(). There is no much improvement of lazy_re today after many
other good optimization work done for sonic-cfggen. It served as a quick
temporary solution.
Some quick test for fast-reboot and warm-reboot done on top of 201911 branch:
Fast-reboot: from ASIC reset to ports in up state:
with lazy_re: 18 sec
without lazy_re: 18 sec
Warm-reboot: LAG restoration time:
with lazy_re: 73 sec
without lazy_re: 72 sec
So, there is no real optimization since the number of sonic-cfggen calls is greatly
reduced in latest SONiC. This means it is time to revert this change.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
To include:
> e168f1d 2021-07-19 pettershao-ragilenetworks: [python coverage] fix result color bar (Azure/sonic-platform-common#202)
> 87c81de 2021-07-13 Prince George: Fix Xcvrd crash due to invalid key access in type_of_media_interface, host_electrical_interface, connector_dict (Azure/sonic-platform-common#206)
> 4533f82 2021-06-21 ngoc-do: Add a template function that returns list of asics on module (Azure/sonic-platform-common#185)
> 1e860c5 2021-06-18 Aravind Mani: Fix decode error when parsing EEPROM fields (Azure/sonic-platform-common#199)
> 93641f3 2021-06-17 Sujin Kang: Unifying the platform api for get_pcie_aer_stats with PcieBase (Azure/sonic-platform-common#197)
This update includes the following commits
acb5d84 Neetha John 2021-07-20 [configlet] Python3 compatible syntax for extracting a key from the dict (#1721)
9b7c58b arlakshm 2021-07-20 Load the database global_db only once for show cli (#1712)
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
As per HLD - Azure/SONiC#625
FRR Patches:
0009-Link-local-scope-was-not-set-while-binding-socket-for-bgp-ipv6-link-local-neighbors.patch
Files modified : bgpd_network.c and bgpd/bgp_zebra.c
Fix for : Link local scope was not set while binding socket with local address causing socket errors for bgp ipv6 link local neighbors.
0010-VRF-interface-lookup-was-still-done-in-the-default-vrf.patch
Files modified : staticd/static_zebra.c
Fix for : VRF interface lookup was still done in the default-vrf which was causing the interface lookup to fail. Due to this static-route pointing to link-local was not getting installed.
0011-Changes-to-send-ipv6-link-local-address-as-nexthop-to-fpmsyncd.patch
Files modified : zebra/zebra_fpm_netlink.c
Fix for : Made changes to send ipv6 address as nexthop to fpmsyncd.
Depends on:
Azure/sonic-utilities#1159Azure/sonic-swss#1463
Signed-off-by: Akhilesh Samineni akhilesh.samineni@broadcom.com
It can be that service is not enabled but UnitFilePreset=enabled (case
for Application Extension):
```
Loaded: loaded (/lib/systemd/system/cpu-report.service; disabled; vendor preset: enabled)
```
This makes existing logic skip enabling the service.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Why I did it
Currently SONiC use the 'isc-dhcp-relay' package to allow DHCP relay functionality on IPv4 networks only.
This will allow the IPv6 functionality along the IPv4 type.
How I did it
Edit supervisord template to start DHCPv6 instances when configured to do so on Config DB.
Align cfg unit test to the new change.
Add DHCPv6 relay minigraph parsing support and a suitable t0 topology xml file for UT.
How to verify it
Configure DHCPv6 agents as described on the feature HLD: Azure/SONiC#765
Test it with real client/server with IPv6 or use the dedicated automatic test: Azure/sonic-mgmt#3565
Signed-off-by: Shlomi Bitton <shlomibi@nvidia.com>
* Split docker-dhcp-relay.supervisord.conf.j2 template into several files for easier code maintenance
To include:
> 66e7817 2021-07-13 [pcied] Fix pcied failure to load due to 'pcied NameError: name 'self' is not defined' (Azure/sonic-platform-daemons#198)
> 3df6757 2021-07-08 [ci] fix result color bar in the code coverage report (Azure/sonic-platform-daemons#196)
Update sonic-snmpagent submodule to pick up new commits:
21d7d97 2021-07-12 Fix: SonicV2Connector behavior change: get_all will return empty dict if (#226)
0813b42 2021-07-12 Entries under .1.3.6.1.2.1.31.1.1.1.18 OID should return the "description" field of PORT_TABLE entries in APPL_DB or CONFIG_DB. (#224)
7a78703 2021-07-08 Install dotnet core to fix python gcov warning for code covery color bar showing (#215)
e0f36a5 2021-06-30 [multi-asic]: Udpate to use SonicDBConfig from swsscommon (#219)
266bd15 2021-06-10 Restored snmp vlan support per RFC1213 and added the missing support for RFC2863 (#218)
#### Why I did it
Update submodule pointer for swss to include recent changes
4f1d726 [portsorch] fix errors when moving port from one lag to another. (#1797)
ae44701 [orchagent] Put port configuration to APPL_DB according to autoneg mode (#1769)
5295f91 Add failure handling for SAI get operations (#1768)
7c7c451 Revert recirc port change (#1813)
5528ebf Cleanup code (#1814)
2d2749a [xcvrd] add debug logs for y_cable change events/probes (#195)
b2c6102 Collect asic info and store in CHASSIS_STATE_DB (#175)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Why I did it
Allow deploying DHCPv6 servers following the implementation PR: #7772
How I did it
Add DHCPv6 to minigraph.py on sonic-cfggen tool and improve the unit test to cover this change.
How to verify it
Try to deploy a switch with DHCPv6 servers.
Signed-off-by: Shlomi Bitton <shlomibi@nvidia.com>
Why I did it
Static route configuration should not depend on BGP_ASN. Remove the dependency on BGP_ASN for StaticRouteMgr.
Fix#8027
How I did it
Check if BGP_ASN field before configuring static route redistribution and wait until BGP_ASN is available to enable static route redistribution.
How to verify it
Add unit test to cover the scenario and verify the functionality on a virtual switch.
#### Why I did it
Restrict the min-links parameter in "config portchannel" to the range 1-1024.
FixesAzure/sonic-buildimage#6781 in conjunction with https://github.com/Azure/sonic-buildimage/pull/1630.
Align YANG model with limits in libteam and sonic-utilties.
#### How I did it
PR 1630 in sonic-utilities prevents CLI user from entering a value outside the allowed range. This PR does the following:
- Increases the maximum value of min-links from 128 to 1024.
- Provides validation in libteam, incorporating as a patch the code in https://git.kernel.org/pub/scm/linux/kernel/git/jpirko/libteam.git/commit/?id=69a7494bb77dc10bb27076add07b380dbd778592.
- Updates the Yang model upper limit from 128 to 1024 (was inconsistent with libteam value).
- Updates the Yang model lower limit from 1 to 0, since 0 is set as default in sonic-utilities which would fail its new range check otherwise.
- Added Yang tests for valid and invalid value.
#### How to verify it
config portchannel add PortChannel0004 --min-links 1024
Command should be accepted.
show interfaces portchannel
Output should show PortChannel0004, no errors on CLI.
config portchannel add PortChannel0005 --min-links 1025
Command should be rejected
show interfaces portchannel
Output should not show PortChannel0005 , no errors on CLI.
#### Which release branch to backport (provide reason below if selected)
#### Description for the changelog
Updates YANG model to allow up to 1024 min_links for portchannel. FixesAzure/sonic-buildimage#6781 in conjunction with https://github.com/Azure/sonic-buildimage/pull/1630.
- Why I did it
Currently dhcp packets are disabled by the COPP manager for non ToRRouter type switches.
Even if the feature is enabled, DHCP packets wont hook to the CPU since the COPP manager will not trap this packets.
This change is to disable dhcp_relay by default for non ToRRouter switches from init_cfg.json.
With this approach, if the user want to enable the feature for non ToRRouter switches, manual enablement is required by the 'feature' configuration.
This is to keep the current approach for MSFT production issue with dhcp relay for non ToRRouter switched and allow the user to decide if to use it or not.
- How I did it
Configure dhcp_relay 'disabled' by default on init_cfg.json for non ToRRouter switches.
Remove the exclusion of dhcp packets on copp_cfg.json
- How to verify it
Enable dhcp_relay feature on a non ToRRouter switch.
Unit-tests modified so the default values on mocked CONFIG DB in 'test_vectors.py' for dhcp_relay will be 'disabled'.
This is by the change for 'init_cfg.json.j2'.
For ToRRouter the state will change from 'disabled' to 'enabled'.
Another test case added for a 'ToR' switch type, this is to test the state is 'enabled' if the user configured it to be so.
Why I did it
systemd-sonic-generator limits multi-asic unit file instances to 10 (single digit instance number 0 - 10). This limitation needs to be removed to handle more than 10 asics.
MAX_NUM_TARGETS and MAX_NUM_INSTALL_LINES limits to 15 which is not sufficient for systems with more than 15 asics.
Inside get_unit_files(), strcmp produce incorrect results due to non null terminated string being compared.
Added build UT support for systemd-sonic-generator
Changes:
3c485e5 [recorder] Fix incorrect attribute enum value capability query (#843)
677ebca [sairedis] Client/Server support zmq configuration file (#845)
7c70e34 [sairedis] Add support for bulk api in client/server (#844)
76d28a6 [pyext] Use SAI autogenerated saiswig.i (#837)
9949c48 [vslib] implement query for SAI_DEBUG_COUNTER_TYPE enum values (#842)
e385212 [MPLS] Minor tweaks to VS for MPLS support for CRM polling of MPLS In-segments and NHs.
d819f97 [meta] Add support for ignored attributes names (#836)
c163238 Add cisco-8000 checks to syncd_init_common (#839)
9aed2ff [sairedis] Add support for client server architecture (#838)
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Updates:
888701b [Mellanox] Remove mstdump from Mellanoxs collect dump script ([Azure/sonic-utilities#1706])
4818360 [sonic-package-manager] support warm/fast reboot for extension packages ([Azure/sonic-utilities#1554])
793b847 [show priority-group drop counters] Remove backup with cached PG drop counters after 'config reload' ([Azure/sonic-utilities#1679])
24fe1ac [show][config] support for interface alias for muxcable commands ([Azure/sonic-utilities#1699])
Why I did it
Currently hostcfgd is implemented in a way each feature which is enabled/disabled triggering execution of systemctl enable/unmask commands which eventually trigger 'systemctl daemon-reload' command.
Each call like this cost 0.6s and overall add a overhead of ~12 seconds of CPU time.
This change will verify the desired state of a feature and the current state of this feature on systemd and trigger a system call only when must.
How I did it
Check each feature status on systemd before executing a system call to enable and reload the systemctl daemon.
How to verify it
Build an image with this change and observe less system calls are executed.
Signed-off-by: Shlomi Bitton <shlomibi@nvidia.com>
186d8513 Pcieutil to load the platform api first instead of using common api (#1672)
7a82c069 [Mellanox] Update mellanox dump generation to include SDK dumps (#1640)
38f8c068 [sfputil] Expose error status fetched from STATE_DB or platform API to CLI (#1658)
c5d00ae4 [pfcwd] Fix the return code in invalid case (#1691)
57dc4032 [ci]: Fix config prompt question issue (#1693)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Before this change, a process running inside every SONiC container dealt with FEATURE table 'auto_restart' field and depending on the value decided whether a container has to be killed or not.
If killed service auto restart mechanism restarts the container.
This change moves the logic from container to the host daemon - hostcfgd.
The 'auto_restart' handling is kept in supervisor-proc-exit-listener but now it is not required for container that wants to support auto restart feature.
hostcfgd refactoring - move feature handling in another class.
override systemd service Restart= setting from hostcfgd.
remove default systemd Restart=always.
Signed-off-by: Stepan Blyshchak stepanb@nvidia.com
- Why I did it
Remove the need to deal with container orchestration logic from the container itself. Leave this logic to the orchestrator - host OS.
- How I did it
hostcfgd configures 'Restart=' value for systemd service.
- How to verify it
root@r-tigon-11:/home/admin# sudo config feature autorestart lldp enabled
root@r-tigon-11:/home/admin# show feature status | grep lldp
lldp enabled enabled
root@r-tigon-11:/home/admin# docker exec -it lldp pkill -9 lldpd
root@r-tigon-11:/home/admin# docker ps -a | grep lldp
65058396277c docker-lldp:latest "/usr/bin/docker-lld…" 2 days ago Exited (0) 20 seconds ago lldp
root@r-tigon-11:/home/admin# docker ps -a | grep lldp
65058396277c docker-lldp:latest "/usr/bin/docker-lld…" 2 days ago Up 5 seconds lldp
root@r-tigon-11:/home/admin# sudo config feature autorestart lldp disabled
root@r-tigon-11:/home/admin# docker exec -it lldp pkill -9 lldpd
root@r-tigon-11:/home/admin# docker ps -a | grep lldp
65058396277c docker-lldp:latest "/usr/bin/docker-lld…" 2 days ago Up 35 seconds lldp
root@r-tigon-11:/home/admin# docker ps -a | grep lldp
65058396277c docker-lldp:latest "/usr/bin/docker-lld…" 2 days ago Exited (0) 3 seconds ago lldp
root@r-tigon-11:/home/admin# docker ps -a | grep lldp
65058396277c docker-lldp:latest "/usr/bin/docker-lld…" 2 days ago Exited (0) 39 seconds ago lldp
root@r-tigon-11:/home/admin#
Advance submodule head for sonic-swss
32261636 [BufferOrch] Don't call SAI API for BUFFER_POOL/PROFILE handling in case the op is DEL and the SAI OID is NULL (Azure/sonic-swss#1786)
6c88e47a [Dynamic Buffer Calc][Mellanox] Bug fixes and enhancements for the lua plugins for buffer pool calculation and headroom checking (Azure/sonic-swss#1781)
e86b900d [MPLS] sonic-swss changes for MPLS (Azure/sonic-swss#1686)
4c8e2b53 [Dynamic Buffer Calc] Avoid creating lossy PG for admin down ports during initialization (Azure/sonic-swss#1776)
36021246 [VS test stability] Skip flaky test for DPB (Azure/sonic-swss#1807)
c37cc1c5 Support for in-band-mgmt via management VRF (Azure/sonic-swss#1726)
1e3a532d Fix config prompt question issue (Azure/sonic-swss#1799)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
A recent version of contextlib2 (https://pypi.org/project/contextlib2/21.6.0/#history) has broken Python2 compatibility, so the version picked up by netaddr when using Python2 must be specified, or else builds fail
Co-authored-by: Tom Zhu <tom.zhu@metaswitch.com>
#### Why I did it
To ensure any environment variables which are configured in the build/test environment do not influence the behavior of sonic-py-common during unit tests. For example, variables which might be set by continuous integration pipelines.
#### How I did it
Add class-scoped pytest fixture to `TestDeviceInfo` class which stashes the current environment variables, clears them and yields. Once all the test cases in the class finish, the fixture will restore the original environment variables.
Also remove unnecessary unittest-style setup and teardown functions from interface_test.py
Advance submodule update with the following changes:
4475750 Config reload fix (#29)
cf60d5e [ci]: add proper azp (#26)
f0fbfe7 [CI] Set up CI with Azure Pipelines (#25)
879d7bd Include port default fec configuration to be included in ZTP configuration (#24)
a6ae955 Add a pre-defined plugin to download a list of files (#23)
6f0305b [MultiDB] Add multidb support to sonic-ztp (#16)
Discussion and requirement in Chassis discussion forum to NOT make the asic-id field in the DEVICE_METADATA mandatory. If this field "asic-id" is not present the orchagent will be started without the -i <asic_id> parameter
Ref: https://github.com/Azure/sonic-buildimage/blob/master/dockers/docker-orchagent/orchagent.sh#L39
How I did it
Made the check to see if the asic-id is valid and update the asic-id field in the DEVICE_METADATA
5708497 [show] fix show version (#1686)
9041ba0 [config] Adding sanity checks for config reload (#1664)
2cdadb5 [config]: Create portchannel with LACP key (#1473)
6f74ba5 [vnet_route_check] Fix logic for getting VNET routes from ASIC DB (#1653)
54fee0f Add range check on portchannel min-links (#1630)
53639ded [xcvrd] Add bitmap support for SFP error event (#184)
2fc05b21 Refactor Pcied and add unittest (#189)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Signed-off-by: Neetha John <nejo@microsoft.com>
Why I did it
The current logic generates 'VLAN_SUB_INTERFACE' table if the device type is backend and cluster name contains 'str'. This is not a reliable method to determine a storage backend device
How I did it
Updated the logic to generate 'VLAN_SUB_INTERFACE' table if any of the following conditions hold true
- device is of type backend and ResourceType attribute is None
- device is of type backend and ResourceType attribute contains "Storage"
- device is of type backend and graph contains "Subinterface" section
Also updated the logic to set "is_storage_device" to True
- For Backend, if any of the above conditions hold true
- For Frontend, if ResourceType attribute contains "Storage"
How to verify it
Added new tests to verify the code changes and built sonic_config_engine-1.0-py3-none-any.whl successfully
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
In the multi asic platforms all the ASIC are advertising the same IPv6 /64 network from Loopback4096.
Therefore, the IPv6 loopback address of backend asic is not learnt on the frontend asic.
Change the bgpd.conf.main.conf.j2 template file to advertise the Loopback4096 ipv6 address as /128
Update sonic-py-swsssdk submodule to include below commits:
6be76f45 Add missing functions to be on par with swsscommon. (#107)
64232a0 (master) [CI] Setup proper Azp (#106)
9d019b0 [ci]: Set up CI with Azure Pipelines (#102)
fa760c4 Fix bug: use instance variable instead of class variable in ConfigDBConnector (#99)
Signed-off-by: Suvarna Meenakshi <sumeenak@microsoft.com>
Why I did it
Quagga is no longer being used. Remove quagga-related code (e.g., docker-fpm-quagga, sonic-quagga, etc.).
How I did it
Remove quagga-related code.
#### Why I did it
- To build flashrom properly with dependency tracking.
#### How I did it
- Moved flashrom code from platform/broadcom/sonic-platform-modules-dell/tools directory to src/flashrom directory.
- At the end, flashrom_0.9.7_amd64.deb package is build which will be installed in the devices.
- Currently flashrom builds only for Dell S6100 platforms.
Introduce new sonic-buildimage images for Broadcom DNX ASIC family.
sonic-broadcom-dnx.bin
sonic-aboot-broadcom-dnx.swi
How I did it
NO CHANGE to existing make commands
make init; make configure PLATFORM=broadcom; make target/sonic-aboot-broadcom.swi; make target/sonic-broadcom.bin
The difference now is that it will result in new broadcom images for DNX asic family as well.
sonic-broadcom.bin, sonic-broadcom-dnx.bin
sonic-aboot-broadcom.swi, sonic-aboot-broadcom-dnx.swi
Note: This PR also adds support for Broadcom SAI 5.0 (based on 1.8 SAI ) for DNX based platform + changes in platform x86_64-arista_7280cr3_32p4 bcm config files and platform_env.conf files
Signed-off-by: Arthi Sivanantham arthi_sivanantham@dell.com
Why I did it
SONiC YANG model support for AAA and TACACS features.
How I did it
Defined various AAA and TACACS YANG containers and lists based on config-DB schema.
How to verify it
Successful build of the following packages:
make target/python-wheels/sonic_yang_models-1.0-py3-none-any.whl
make target/python-wheels/sonic_yang_mgmt-1.0-py3-none-any.whl
Update sonic-utilities submodule. This include the following commits:
285960d [config]: Update environment file during config reload (#1673)
3f0ecd5 [config] Remove "reset failed" print lines from config reload (#1654)
a1c8751 Make the soft-reboot available in the SONiC image on master (#1681)
45e7b71 [Mellanox] Add all results from saisdkdump to the techsupport on Mellanox switches (#1660)
Why I did it
There is a regression on 2700 platform where the evidence points to the flex counter change.
How I did it
Back track the swss submodule head to exclude:
[flex-counters] Delay flex counters stats init for faster boot time (#1749)
Verified that image build from this PR doesn't trigger the crash.
Signed-off-by: Ying Xie ying.xie@microsoft.com
7670b49 [sonic_platform/sfp_base] Add common definition for get SFP error status (#194)
1336598 [CI] sonic-config-engine now depends on SONiC YANG packages (#198)
f57fee4 Add to check pcie configuration revision to get the right configuration. (#195)
4e3a0a0 Fix typo for midplane APIs. (#196)
fc2e9e2 [eeprom_tlv_info] Optimize EEPROM data process by using visitor pattern (#193)
Why I did it
SONiC YANG model support for BGP & route-map features.
How I did it
Defined various BGP and route-map YANG containers and lists based on config-DB schema.
How to verify it
Built the following successfully with various BGP & route-map unit test cases.
make target/python-wheels/sonic_yang_models-1.0-py3-none-any.whl
make target/python-wheels/sonic_yang_mgmt-1.0-py3-none-any.whl
Updates sonic-platform-daemons submodule. Includes the following commits:
```
eb8a223 [xcvrd] Force cleanup of chassis global variable on deinit (#193)
a6903c0 [CI] sonic-config-engine now depends on SONiC YANG packages (#194)
bf60a27 Replace swsssdk.SonicV2Connector with swsscommon implementation (#191)
```
19615e3 Fixing db_migrator for Feature table (#1674)
d1c1c61 [tests]: skip some dynamic port breakout unit tests (#1677)
25669c3 [CI] sonic-config-engine now depends on SONiC YANG packages (#1675)
3ff68c4 [neighbor-advertiser] delete the tunnel maps appropriately (#1663)
a425ca2 [config] support for configuring muxcable to manual mode of operation (#1642)
25e17de [show platform summary] Add chassis hardware info to platform summary and version (#1624)
f5f2a00 [db_migrator] fix old 1911 feature config migration to a new one. (#1635)
56db162 [config] Fix config int add incorrect ip (#1414)
1da879c [db_migrator][Mellanox] Update Mellanox buffer migrator with 2km-cable supported (#1564)
c2b760f [sonic_package_manager] flush once finished saving docker image into temporary file (#1638)
cd69473 Replace swsssdk.ConfigDBConnector and SonicDBConfig with swsscommon implementation (#1620)
5f20365 Change to use rvtysh when calling the show commands (#1572)
51d6bf5 Fix Aboot breakage in sonic package manager in sonic-installer (#1625)
18bed46 [console][show] Force refresh all lines status during show line (#1641)
b616cd9 [TPID CONFIG] Added TPID configuration CLI support (#1618)
01eb4b1 [show] support for show muxcable firmware version of only active banks (#1629)
7744c8d [fdb]cli: fdb entries are cleared according to vlan or port or vlan&&port (#657)
e23c5ee Add psu hardware revision to psushow table (#1601)
f1726fe Make advance_version_for_expected_database available for other db migrator test cases as well (#1614)
5d1ad05 [show] add support for muxcable metrics (#1615)
feeab29 [config] Sort Config Db When Saving (#1623)
