Commit Graph

31 Commits

Author SHA1 Message Date
gechiang
baa00e6969
[202012] Disable ALPM distributed hitbit thread that is used for debug purpose only but interfered with Other functional operations (#9190)
This is to address an issue where it was observed that SAI operations sometime make take a very long to time complete (over 45ms). It was determined that the ALPM distributed thread was causing this issue.
The fix is to disable this debug thread that has no functional purpose.

Preliminary tests looks fine. BGP neighbors were all up with proper routes programmed
interfaces are all up
Manually ran the fib test cases on 7050CX3 (TD3), TD2, TH, TH2, and TH3 based platforms and
thy all passed.
2021-11-08 11:50:44 -08:00
gechiang
8915e488b7
[202012] BRCM Disable ACL Drop counted towards interface RX_DRP counters (#8383)
* [202012] BRCM Disable ACL Drop counted towards interface RX_DRP counters
2021-08-11 09:10:17 -07:00
Neetha John
66c8934d84 Revert "Revert "Update default cable len to 0m for TD2"" (#8354)
* Update default cable len to 0m for TD2 (#8298)
* Update sonic-cfggen tests with the correct cable len

Signed-off-by: Neetha John <nejo@microsoft.com>

As part of the buffer reclamation efforts for TD2, setting the default cable len to 0m which means unused ports will have a cable len of 0m.

Why I did it
To align with the changes in Azure/sonic-swss#1830

How to verify it
- With the default cable len set to 0m and the associated changes in swss, CABLE_LENGTH table had '0m' set for unused ports and accordingly more space was reserved for the shared pool
- Cfggen tests passed with the cable len update
2021-08-07 12:43:46 +00:00
Guohan Lu
fa239270c1 Revert "Update default cable len to 0m for TD2 (#8298)"
This reverts commit af2024e567.
2021-08-04 08:40:36 -07:00
Neetha John
af2024e567 Update default cable len to 0m for TD2 (#8298)
Signed-off-by: Neetha John <nejo@microsoft.com>

As part of the buffer reclamation efforts for TD2, setting the default cable len to 0m which means unused ports will have a cable len of 0m.

Why I did it
To align with the changes in Azure/sonic-swss#1830

How to verify it
With the default cable len set to 0m and the associated changes in swss, CABLE_LENGTH table had '0m' set for unused ports and accordingly more space was reserved for the shared pool
2021-08-03 09:58:46 +00:00
abdosi
b6efb49817
Update bcm soc property bcm_num_cos from 8 to 10 (#5314)
as needed by SAI 3.7 and above. Without this change
Warmboot fails from 3.5 to 3.7 as Braodcoam Datastructure
gets corrupted after warm-boot.

Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
2020-09-04 07:40:17 -07:00
Wenda Ni
1cc6afc9a9 [QoS]: fix size and xoff value on a7050-QX-32S, -QX32, and s6000(#2527)
Signed-off-by: Wenda <wenni@microsoft.com>
2019-02-04 22:27:01 -08:00
lguohan
9c2d7240ea
[vs]: Force10-S6000 buffer settings for virtual switch (#2515)
Signed-off-by: Guohan Lu <gulv@microsoft.com>
2019-02-01 11:18:02 -08:00
Wenda Ni
ce9a3f0c5a [QoS]: QoS Config change for multiple devices (#2505)
* QoS config change: 1) DSCP mapping; 2) link pg/queue 6 to lossy buffer;
3) redistribute scheduler

Signed-off-by: Wenda <wenni@microsoft.com>

* Add scheduling weight to queue 2

Signed-off-by: Wenda <wenni@microsoft.com>

* Link pg/queue 2 to lossy buffer

Signed-off-by: Wenda <wenni@microsoft.com>

* Update the pg headroom for a7060-D48C8 50G

Signed-off-by: Wenda <wenni@microsoft.com>

* Update config gen test for qos

Signed-off-by: Wenda <wenni@microsoft.com>

* Update pg headroom size, and update egress lossy pool size accordingly

Signed-off-by: Wenda <wenni@microsoft.com>

* Update headroom pool size; Update ingress service pool and egress lossy
pool sizes accordingly;

Signed-off-by: Wenda <wenni@microsoft.com>

* a7260: update headroom pool size; Update ingress service pool and egress lossy pool sizes accordingly;

Signed-off-by: Wenda <wenni@microsoft.com>

* Update config gen test for buffer

Signed-off-by: Wenda <wenni@microsoft.com>
2019-01-30 19:00:13 -08:00
Wenda Ni
b7330ddfc3 [buffer]: Add buffer defaults for t0 on s6000 and a7050 (#2438)
Signed-off-by: Wenda <wenni@microsoft.com>
2019-01-15 15:34:33 -08:00
paavaanan
baf228e9fa Adding index in port_config.ini (#2392) 2018-12-19 11:17:09 -08:00
Wenda Ni
f5e678cf84 Port QoS & buffer changes in 0330 to master (#2239)
* 1) DSCP 46 to 5; 2) ecn config for lossless traffic; 3) ecn on by default; 4) DWRR equal weight;

Signed-off-by: Wenda <wenni@microsoft.com>

* 1) link pg & queue 5 to lossy buffer profile; 2) ingress lossless alpha 1/8

Signed-off-by: Wenda <wenni@microsoft.com>

* Update the test case for qos & buffer json template

Signed-off-by: Wenda <wenni@microsoft.com>

* Migrate a7050-qx32 and s6000 to use pg_profile lookup architecture

Signed-off-by: Wenda <wenni@microsoft.com>

* Update pg headroom egress service pool for a7050-qx-32s, a7050-qx32, and s6000

Signed-off-by: Wenda <wenni@microsoft.com>

* Link queue 5 to lossy profile

Signed-off-by: Wenda <wenni@microsoft.com>
2018-12-04 20:51:55 -08:00
Sudharsan D.G
1467434e4c [S6000]: Dell S6000 ON related Port numbering and eeprom changes (#2315) 2018-11-28 21:57:50 -08:00
Wenda Ni
77652c55fd [QoS]: Unify qos json by using qos_config.j2 template (#2023)
* Unify qos config with qos_config.j2 template

Signed-off-by: Wenda <wenni@microsoft.com>

* Change 7050 to use qos config template

Signed-off-by: Wenda <wenni@microsoft.com>

	modified:   device/arista/x86_64-arista_7050_qx32/Arista-7050-QX32/qos.json.j2
	modified:   device/arista/x86_64-arista_7050_qx32s/Arista-7050-QX-32S/qos.json.j2

* Change a7060, a7260, s6000, s6100, z9100  to use qos config template

Signed-off-by: Wenda <wenni@microsoft.com>

* Change mlnx devices to use qos config template

Signed-off-by: Wenda <wenni@microsoft.com>

	modified:   ../../../mellanox/x86_64-mlnx_msn2100-r0/ACS-MSN2100/qos.json.j2
	modified:   ../../../mellanox/x86_64-mlnx_msn2410-r0/ACS-MSN2410/qos.json.j2
	modified:   ../../../mellanox/x86_64-mlnx_msn2700-r0/ACS-MSN2700/qos.json.j2
	modified:   ../../../mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/qos.json.j2

* Change barefoot devices to use qos config template

Signed-off-by: Wenda <wenni@microsoft.com>

	modified:   barefoot/x86_64-accton_wedge100bf_32x-r0/montara/qos.json.j2
	modified:   barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/qos.json.j2

* Change accton as7212 to use qos config template

Signed-off-by: Wenda <wenni@microsoft.com>

	modified:   accton/x86_64-accton_as7212_54x-r0/AS7212-54x/qos.json.j2

* Apply PORT_QOS_MAP to active ports only

Signed-off-by: Wenda <wenni@microsoft.com>

* Update qos config test with qos_config.j2 template

Signed-off-by: Wenda <wenni@microsoft.com>

* Update sample output of qos-dell6100.json

Signed-off-by: Wenda <wenni@microsoft.com>

* Remove generating the default port name and index list, i.e., remove the generate_port_lists macro, because PORT is always defined

Signed-off-by: Wenda <wenni@microsoft.com>

* Include pfc_to_pg_map according to platform asic type obtained from
/etc/sonic/sonic_version.yml rather than specifying per hwsku

Signed-off-by: Wenda Ni <wenni@microsoft.com>

* Customize TC_TO_PRIORITY_GROUP_MAP and
PFC_PRIORITY_TO_PRIORITY_GROUP_MAP for barefoot

Signed-off-by: Wenda <wenni@microsoft.com>

* Unify PFC_PRIORITY_TO_PRIORITY_GROUP_MAP: remove "0":"0", "1":"1" as
these two pgs do not generate PFC frames.

Signed-off-by: Wenda <wenni@microsoft.com>
2018-10-17 14:10:34 -07:00
Ying Xie
5ab66b191a
[bcm config] remove scache_filename config entry (#2140)
Warm boot is managed by SAI. This configuration entry shouldn't be
included in bcm config.

Signed-off-by: Ying Xie <ying.xie@microsoft.com>
2018-10-12 08:05:38 -07:00
Ying Xie
e7ef637a09
[config-bcm] move broadcom config files to device folder (#1947)
- Future versions of SAI packages will stop carrying these files.

Signed-off-by: Ying Xie <ying.xie@microsoft.com>
2018-08-20 10:11:11 -07:00
pavel-shirshov
3681cfa553
Use only active ports when applying buffers/qos configuration (#1787)
* First part of skipping not used port for qos configuration

* Use active ports only to set QoS parameters for 6100

* Add a test for qos.json.j2

* Add a test for Dell S6100 buffers.json template

* Update submodulre
2018-06-21 11:51:37 -07:00
Wenda Ni, Ph.D
f947172c0a [devices]: Merge ingress service pools of lossless and lossy traffic for TD2 (#1578)
Signed-off-by: Wenda <wenni@microsoft.com>
2018-04-13 22:22:21 -07:00
Wenda Ni, Ph.D
de5e5332be [mmu]: reduce headroom size and remove queue min for lossless traffic (#1508)
* Reduce xoff size for in-flight packets of lossless traffic

Signed-off-by: Wenda <wenni@microsoft.com>

* Must explicitly specify min buffer size per queue to be zero

Signed-off-by: Wenda <wenni@microsoft.com>
2018-03-17 14:48:52 -07:00
Wenda Ni, Ph.D
ad5f871feb [devices]: Consolidate to one egress lossless buffer configuration (#1493) 2018-03-16 15:52:08 -07:00
Wenda Ni, Ph.D
1f4ce098b5
Buffers config (#1476)
* Improve memory utilization through more sharing at the ingress on A7050-QX-32S

Signed-off-by: Wenda <wenni@microsoft.com>

* Apply buffers config changes on A7050-QX-32S to A7050-QX32

Signed-off-by: Wenda <wenni@microsoft.com>

* Apply buffers config changes on A7050-QX-32S to S6000
2018-03-12 14:25:57 -07:00
Wenda Ni, Ph.D
20ab99bf31 [qos]: Apply ECN configuration on lossless queue for 7050-QX-32S and S6000 (#1439) 2018-03-03 10:09:49 -08:00
sihuihan88
1e6576c5b8 [devices]: Update qos and buffer configuration for Dell S6000 (#1441)
Signed-off-by: Sihui Han <sihan@microsoft.com>
2018-03-01 20:56:12 -08:00
Shuotian Cheng
a8a4c7b9ae
[device]: Remove unused qos.json files (#1315) 2018-01-29 10:08:10 -08:00
Andriy Moroz
58d8302b53 Buffers configuration update on port speed change (#1345)
* Move buffer configuration to ConfigDB

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Converted Dell and Arista configs

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Add buffer configs for ACS-MSN2740

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Updated buffers template

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Fixed j2 unit test

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Update buffers config for Force10-S6100

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Update VS docker to support speed and buffers test

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Update buffers config generation

- fixed support of sonic-to-sonic install

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Update submodules pointers for buffers config

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>
2018-01-29 08:11:05 -08:00
Ying Xie
2b91c9681d Revert "Buffers configuration update on port speed change (#1250)" (#1340)
This reverts commit 814e50fd5e.
2018-01-26 10:13:43 -08:00
Andriy Moroz
814e50fd5e Buffers configuration update on port speed change (#1250)
* Move buffer configuration to ConfigDB

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Converted Dell and Arista configs

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Add buffer configs for ACS-MSN2740

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Updated buffers template

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Fixed j2 unit test

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Update buffers config for Force10-S6100

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Update VS docker to support speed and buffers test

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Update buffers config generation

- fixed support of sonic-to-sonic install

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>
2018-01-26 08:09:31 -08:00
Ying Xie
33d5e93b0a [devices]: Update 6000, 6100, 7050 QOS configurations (#1191) 2017-11-28 18:31:43 -08:00
Andriy Moroz
6d0329af3d Move QoS configuration to Config DB (#1178)
* Move Mellanox QoS configuration to config DB

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Move qos.json to hwsku subfolder

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Remove copying of old qos config

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Update WRED threshold values

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* hwsku2

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Fix syntax error in json

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Add qos config for some Dell and Arista platforms

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Fix inital qos config on clean boot

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>

* Updated swss-common and swss pointers (QoS in Config DB)

Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>
2017-11-22 08:58:22 -08:00
Shuotian Cheng
fb01755d48 [swss]: Update sonic-swss to enable SAI_NUM_ECMP_MEMBERS option in sai.profile (#518)
- Update Broadcom libsaibcm debian package to 2.1.5.1-2
- Add SAI_NUM_ECMP_MEMBERS=32 to two Trident II platforms
- Update sonic-swss submodule version to support such changes

Signed-off-by: Shuotian Cheng <shuche@microsoft.com>
2017-04-19 19:34:27 -07:00
Joe LeVeque
2a551d3c60 Consolidate device-specific files; install as a Debian package (#316)
( All device-specific files now reside under /device directory in a <vendor-name>/<platform-string>/<hardware-SKU> directory structure in repo.

* Device-specific files are now packaged into a Debian package (sonic-device-data) and are now installed to /usr/share/sonic/device/<platform-string>/<hardware-SKU>/ directory on switch.
2017-02-27 00:13:36 -08:00