* [ACL] enable ACL FC when genereting config from minigraph but disable by default
Why I did it
To support ACL counters on Flex Counter Infrastructure.
How I did it
Enable ACL FC in init_cfg and minigraph. Disable when genereting configuration from preset.
How to verify it
Together with depends PRs. Run ACL/Everflow test suite.
Signed-off-by: Stepan Blyshchak <stepanb@nvidia.com>
Allow mellanox platform to build and successfully switch packets in
Debian 11
Upgraded
* Mellanox SDK
* Mellanox Hardware Management
* Mellanox Firmware
* Mellanox Kernel Patches
Adjusted build system to support host system running bullseye and
dockers running buster.
1. Fix build for armhf and arm64
2. upgrade centec tsingma bsp support to 5.10 kernel
3. modify centec platform driver for linux 5.10
Co-authored-by: Shi Lei <shil@centecnetworks.com>
ISSU will likely be broken. As of right now, the issu-version file is
not being generated during build.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
The common startup script used for SONiC containers is calling an inline
python command that uses Python 2 syntax, and thus errors out when run
with Python 3. Make this work with Python 3.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Remove Python 2 package installation from the base image. For container
builds, reference Python 2 packages only if we're not building for
Bullseye.
For libyang, don't build Python 2 bindings at all, since they don't seem
to be used.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Python 2 is no longer available, so remove those packages, and remove
the pip2 commands. For picocom and systemd, just install from the
regular repo, since there's no backports yet.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
- Why I did it
In case an app.ext requires a dependency syncd^1.0.0, the RPC version of syncd will not satisfy this constraint, since 1.0.0-rpc < 1.0.0. This is not correct to put 'rpc' as a prerelease identifier. Instead put 'rpc' as build metadata in the version: 1.0.0+rpc which satisfies the constraint ^1.0.0.
- How I did it
Changed the way how to version in RPC and DBG images are constructed.
- How to verify it
Install app.ext with syncd^1.0.0 dependency on a switch with RPC syncd docker.
Signed-off-by: Stepan Blyshchak <stepanb@nvidia.com>
Enable gbsyncd support for cisco platforms
Signed-off-by: Sachin Naik sachnaik@cisco.com
Why I did it
To enable cisco gbsyncd container for cisco gearbox hardwares.
How I did it
Create symlink to gbsyncd.service.j2 to start gearbox systemd service.
How to verify it
Verify that the gbsyncd-cisco container started for x86_64-88_lc0_36fh_mo-r0 Line card
root@localhost:/home/cisco# docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
50d309ea9967 docker-sonic-telemetry:latest "/usr/local/bin/supe…" 26 minutes ago Up 6 minutes telemetry
65cebc9e181b docker-sonic-mgmt-framework:latest "/usr/local/bin/supe…" 26 minutes ago Up 6 minutes mgmt-framework
5a9b510da24d docker-snmp:latest "/usr/local/bin/supe…" 26 minutes ago Up 6 minutes snmp
c291b0a1fc87 26195cc7c042 "/usr/bin/docker_ini…" 26 minutes ago Up 6 minutes dhcp_relay
d85aa5e6b78c docker-router-advertiser:latest "/usr/bin/docker-ini…" 28 minutes ago Up 6 minutes radv
46c787329374 docker-lldp:latest "/usr/bin/docker-lld…" 28 minutes ago Up 6 minutes lldp
6643f53e4ceb docker-gbsyncd-cisco:latest "/usr/local/bin/supe…" 28 minutes ago Up 6 minutes gbsyncd-cisco
f05ae8af4aaa docker-syncd:latest "/usr/local/bin/supe…" 28 minutes ago Up 6 minutes syncd
02e0e53b62cf docker-teamd:latest "/usr/local/bin/supe…" 28 minutes ago Up 6 minutes teamd
fc7bc2dbb6a9 docker-orchagent:latest "/usr/bin/docker-ini…" 28 minutes ago Up 6 minutes swss
5c5147c986c9 docker-fpm-frr:latest "/usr/bin/docker_ini…" 28 minutes ago Up 6 minutes bgp
63b5ce3d4c80 docker-platform-monitor:latest "/usr/bin/docker_ini…" 28 minutes ago Up 6 minutes pmon
7e6f34dca0e5 docker-database:latest "/usr/local/bin/dock…" 28 minutes ago Up 29 minutes database
Signed-off-by: Sachin Naik <sachnaik@cisco.com>
Co-authored-by: Sachin Naik <sachnaik@cisco.com>
#### Why I did it
Nokia IXR7250E platform requires grpcio, grpcio-tools python library, and libprotobuf-dev, libgrpc++ library
#### How I did it
Modified the build_debian.sh install libprotobuf-dev and libgrpc++ to support nokia ndk
Modified the sonic_debian_extension.j2 to install the grpcio and grpcio-tools in the host
Modified the docker-platform-monitor/Dockerfile.js to install grpcio and grpcio-tools for the pmon container.
#### How to verify it
Image running success.
- add a new service "mark_dhcp_packet" to mux container
- apply packet marks on a per-interface basis in ebtables
- write packet marks to "DHCP_PACKET_MARK" table in state_db
[mux] Update Service Install With SONiC Target
Recent PR grouped all SONiC service into sonic.taget. The install section
of mux.service was not update and this causes delays when using config
reload as the service failed state is not being reset.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
[mux] Start Mux on Only Dual-ToR Platform
mux docker depends on the presence of mux cable hardware and is
supposed to run only Gemini ToRs. This PR change the mux feature
config in order to enable mux docker based on device configuration.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
Linkmgrd monitors link status, mux status, and link state. Has
the link becomes unhealthy, linkmgrd will trigger mux switchover
on a standby ToR ensuring uninterrupted service to servers/blades.
This PR is initial implementation of linkmgrd.
Also, docker-mux container hold packages related to maintaining and managing
mux cable. It currently runs linkmgrd binary that monitor and switches
the mux if needed.
This PR also introduces mux-container and starts linkmgrd as startup when
build is configured with INCLUDE_MUX=y
Edit: linkmgrd PR will follow.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
Related work items: #2315, #3146150
This pull request add plugin support library to bash.
And we will create a TACACS+ plugin for bash in an other PR, which will bring per command authorization feature to bash.
Why I did it
To support TACACS per command authorization, we check user command before execute it.
How I did it
Add plugin support to bash.
How to verify it
UT with CUnit under bash project cover all new code in plugin.c.
Also pass all current UT.
Which release branch to backport (provide reason below if selected)
N/A
Description for the changelog
Add plugin support to bash.
Depends on Azure/sonic-utilities#1626
Depends on Azure/sonic-swss#1754
QOS tables in config db used ABNF format i.e "[TABLE_NAME|name] to refer fieldvalue to other qos tables.
Example:
Config DB:
"Ethernet92|3": {
"scheduler": "[SCHEDULER|scheduler.1]",
"wred_profile": "[WRED_PROFILE|AZURE_LOSSLESS]"
},
"Ethernet0|0": {
"profile": "[BUFFER_PROFILE|ingress_lossy_profile]"
},
"Ethernet0": {
"dscp_to_tc_map": "[DSCP_TO_TC_MAP|AZURE]",
"pfc_enable": "3,4",
"pfc_to_queue_map": "[MAP_PFC_PRIORITY_TO_QUEUE|AZURE]",
"tc_to_pg_map": "[TC_TO_PRIORITY_GROUP_MAP|AZURE]",
"tc_to_queue_map": "[TC_TO_QUEUE_MAP|AZURE]"
},
This format is not consistent with other DB schema followed in sonic.
And also this reference in DB is not required, This is taken care by YANG "leafref".
Removed this format from all platform files to consistent with other sonic db schema.
Example:
"Ethernet92|3": {
"scheduler": "scheduler.1",
"wred_profile": "AZURE_LOSSLESS"
},
Dependent pull requests:
#7752 - To modify platfrom files
#7281 - Yang model
Azure/sonic-utilities#1626 - DB migration
Azure/sonic-swss#1754 - swss change to remove ABNF format
As a part of warmboot, redis database is dumped:
c97fe546e5/scripts/fast-reboot (L269)
However, this dump file is deleted, after it is loaded back into db post reboot.
The DB dump can be useful for debugging purpose, hence taking a backup of it can be useful.
Instead of deleting the dump, rename and keep the dump.
#### Why I did it
Use a predefined variable to get vendor information when the swss docker container is created
#### How I did it
Use `{{ sonic_asic_platform }}` instead of `$SONIC_CFGGEN -y /etc/sonic/sonic_version.yml -v asic_type`
#### How to verify it
Manually test.
In version 3.0.0, If a broadcast address is specified in
/etc/network/interfaces, then when ifup is run, it will fail with an
error saying `'str' object has no attribute 'packed'`. This appears to
be because it expects all attributes for an interface to be "packable"
into a compact binary representation. However, it doesn't actually
convert the broadcast address into an IPNetwork object (other addresses
are handled).
Therefore, convert the broadcast address it reads in from a str to an
IPNetwork object.
Also explicitly specify the scope of the loopback address in
/etc/network/interfaces as host scope. Otherwise, it will get added as
global scope by default. As part of this, use JSON to parse ip's output
instead of text, for robustness.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Use DOCKER_HOST. Every client including docker command and python docker API uses this environment variable to connect to dockerd.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
the branch refers the branch name that the commit is in,
for example master, 202012, 201911, ...
In case there is no branch, the name will be HEAD.
release is encoded in /etc/sonic/sonic_release file.
the file is only available for a release branch.
It is not available in master branch.
example for master branch
```
build_version: 'master.602-6efc0a88'
debian_version: '10.7'
kernel_version: '4.19.0-9-2-amd64'
asic_type: vs
commit_id: '6efc0a88'
branch: 'master'
release: 'none'
build_date: Tue Dec 29 06:54:02 UTC 2020
build_number: 602
built_by: johnar@jenkins-worker-23
```
example for 202012 release branch
```
build_version: '202012.602-6efc0a88'
debian_version: '10.7'
kernel_version: '4.19.0-9-2-amd64'
asic_type: vs
commit_id: '6efc0a88'
branch: '202012'
release: '202012'
build_date: Tue Dec 29 06:54:02 UTC 2020
build_number: 602
built_by: johnar@jenkins-worker-23
```
Signed-off-by: Guohan Lu <lguohan@gmail.com>
#### Why I did it
* `arp_update` fails to ping those neighbors over vlan sub interfaces.
#### How I did it
* modify `arp_update_vars.j2` to get vlan sub interfaces with ipv6 addresses assigned.
* modify `arp_update` to send ipv6 pings over those retrieved vlan sub interfaces.
Signed-off-by: Longxiang Lyu <lolv@microsoft.com>
This change is to add a gbsyncd container to accommodate the syncd process and the SAI libraries for the Credo gearbox chips.
How I did it
This container works similar to the existing Broadcom syncd container. Its main difference is that the SAI-related dynamic libraries are replaced by the ones for Credo gearbox chips, and the container only reacts to SAI events for the gearbox chips. The SAI libraries will be provided by the package libsai-credo_1.0_amd64.deb.
For the image build, the added container will be built and included in the Broadcom platform image, after $(LIBSAI_CREDO)_URL = is replaced to the correct value. For now, as $(LIBSAI_CREDO)_URL is empty, the container build is skipped in the image build.
After the container is included in the image, in the runtime, the container will begin with checking the existence of /usr/share/sonic/hwsku/gearbox_config.json; if that file is not provided, the container will exit by itself. Therefore, for platforms unrelated to the Credo chips, as long as they are not providing the file, they will not be affected by this change.
This PR creates a directory firmware on the HOST with the path /usr/share/sonic/firmware, as well as this is
mounted on PMON container with the same path /usr/share/sonic/firmware. This is required for firmware
upgrade support for muxcable as currently by design all Y-Cable API's are called by xcvrd. As such if CLI has
to transfer a file to PMON we need to mount a directory from host to PMON just for getting the firmware files.
Hence we require this change.
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Changes to allow starting per asic services like swss and syncd only if the platform vendor codedetects the asic is detected and notified. The systemd services ordering we want is database->database@->pmon->swss@->syncd@->teamd@->lldp@
There is also a requirement that management, telemetry, snmp dockers can start even if all asic services are not up.
Why I did it
For VOQ chassis, the fabric cards will have 1-N asics. Also, there could be multiple removable fabric cards. On the supervisor, swss and syncd containers need to be started only if the fabric-card is in Online state and respective asics are detected by the kernel. Using systemd, the dependent services can be in inactive state.
How I did it
Introduce a mechanism where all ASIC dependent service wait on its state to be published via PMON to REDIS. Once the subscription is received, the service proceeds to create respective dockers.
For fixed platforms, systemd is unchanged i.e. the service bring up and docker creation happens in the start()/ExecStartPre routine of the .sh scripts.
For VOQ chassis platform on supervisor, the service bringup skips docker creation in the start() routine, but does it in the wait()/ExecStart routine of the .sh scrips.
Management dockers are decoupled from ASIC docker creation.
- Why I did it
Make DHCP relay docker an extension. DHCP relay now carries dhcp relay commands CLI plugin and has a complete manifest.
It is installed as extension if INCLUDE_DHCP_REALY is set to y.
DEPENDS on #5939
- How I did it
Modify DHCP relay docker makefile and dockerfile. Make changes to sonic_debian_extension.j2 to install sonic packages.
I moved DHCP related CLI tests from sonic-utilities to DHCP relay docker.
This PR introduces a way to write a plugin as part of docker image and run the tests from cli-plugin-tests directory under docker directory.
The test result is available in target/docker-dhcp-relay.gz.log:
[ REASON ] : target/docker-dhcp-relay.gz does not exist NON-EXISTENT PREREQUISITES: docker-start target/docker-config-engine-buster.gz-load target/python-wheels/sonic_utilities-1.2-py3-none-any.whl-in
stall target/debs/buster/python3-swsscommon_1.0.0_amd64.deb-install
[ FLAGS FILE ] : []
[ FLAGS DEPENDS ] : []
[ FLAGS DIFF ] : []
============================= test session starts ==============================
platform linux -- Python 3.7.3, pytest-3.10.1, py-1.7.0, pluggy-0.8.0 -- /usr/bin/python3
cachedir: .pytest_cache
rootdir: /sonic/dockers/docker-dhcp-relay/cli-plugin-tests, inifile:
plugins: cov-2.6.0
collecting ... collected 10 items
test_config_dhcp_relay.py::TestConfigVlanDhcpRelay::test_plugin_registration PASSED [ 10%]
test_config_dhcp_relay.py::TestConfigVlanDhcpRelay::test_config_vlan_add_dhcp_relay_with_nonexist_vlanid PASSED [ 20%]
test_config_dhcp_relay.py::TestConfigVlanDhcpRelay::test_config_vlan_add_dhcp_relay_with_invalid_vlanid PASSED [ 30%]
test_config_dhcp_relay.py::TestConfigVlanDhcpRelay::test_config_vlan_add_dhcp_relay_with_invalid_ip PASSED [ 40%]
test_config_dhcp_relay.py::TestConfigVlanDhcpRelay::test_config_vlan_add_dhcp_relay_with_exist_ip PASSED [ 50%]
test_config_dhcp_relay.py::TestConfigVlanDhcpRelay::test_config_vlan_add_del_dhcp_relay_dest PASSED [ 60%]
test_config_dhcp_relay.py::TestConfigVlanDhcpRelay::test_config_vlan_remove_nonexist_dhcp_relay_dest PASSED [ 70%]
test_config_dhcp_relay.py::TestConfigVlanDhcpRelay::test_config_vlan_remove_dhcp_relay_dest_with_nonexist_vlanid PASSED [ 80%]
test_show_dhcp_relay.py::TestVlanDhcpRelay::test_plugin_registration PASSED [ 90%]
test_show_dhcp_relay.py::TestVlanDhcpRelay::test_dhcp_relay_column_output PASSED [100%]
=============================== warnings summary ===============================
/usr/local/lib/python3.7/dist-packages/tabulate.py:7
/usr/local/lib/python3.7/dist-packages/tabulate.py:7: DeprecationWarning: Using or importing the ABCs from 'collections' instead of from 'collections.abc' is deprecated, and in 3.8 it will stop working
from collections import namedtuple, Iterable
-- Docs: https://docs.pytest.org/en/latest/warnings.html
==================== 10 passed, 1 warnings in 0.35 seconds =====================
#### Why I did it
I made this change to support warm/fast reboot for SONiC extension packages as per HLD Azure/SONiC#682.
#### How I did it
I extended manifest.json.j2 with new warm/fast reboot related fields and also extended sonic_debian_extension.j2 script template to generate the shutdown order files for warm and fast reboot.
After https://github.com/Azure/sonic-buildimage/pull/7598 the packages.json generation is broken. This change fixes it make the whole build fail in case generation failed.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
- Why I did it
Currently dhcp packets are disabled by the COPP manager for non ToRRouter type switches.
Even if the feature is enabled, DHCP packets wont hook to the CPU since the COPP manager will not trap this packets.
This change is to disable dhcp_relay by default for non ToRRouter switches from init_cfg.json.
With this approach, if the user want to enable the feature for non ToRRouter switches, manual enablement is required by the 'feature' configuration.
This is to keep the current approach for MSFT production issue with dhcp relay for non ToRRouter switched and allow the user to decide if to use it or not.
- How I did it
Configure dhcp_relay 'disabled' by default on init_cfg.json for non ToRRouter switches.
Remove the exclusion of dhcp packets on copp_cfg.json
- How to verify it
Enable dhcp_relay feature on a non ToRRouter switch.
Unit-tests modified so the default values on mocked CONFIG DB in 'test_vectors.py' for dhcp_relay will be 'disabled'.
This is by the change for 'init_cfg.json.j2'.
For ToRRouter the state will change from 'disabled' to 'enabled'.
Another test case added for a 'ToR' switch type, this is to test the state is 'enabled' if the user configured it to be so.
The voq system lag id boundary is set in redis-chassis. Changes include
setting this from database-chassis container. This fixes a timing issue
in finding datbase_config.json file from redis directory which is
created from database container. Since database container usually
starts after database-chassis container the existence of this file is
unreliable while running the command. Running the command under
database-chassis container makes sure that the database_config.json form
redis-chassis directory is guaranteed to be available and hence fixes the
timing issue.
Signed-off-by: vedganes <vedavinayagam.ganesan@nokia.com>
Signed-off-by: Stepan Blyschak stepanb@mellanox.com
Why I did it
To support building DHCP relay as extension and installing it during build time.
How I did it
Created infrastructure. Users need to define their packages in rules/sonic-packages.mk
How to verify it
Together with #6531
Before this change, a process running inside every SONiC container dealt with FEATURE table 'auto_restart' field and depending on the value decided whether a container has to be killed or not.
If killed service auto restart mechanism restarts the container.
This change moves the logic from container to the host daemon - hostcfgd.
The 'auto_restart' handling is kept in supervisor-proc-exit-listener but now it is not required for container that wants to support auto restart feature.
hostcfgd refactoring - move feature handling in another class.
override systemd service Restart= setting from hostcfgd.
remove default systemd Restart=always.
Signed-off-by: Stepan Blyshchak stepanb@nvidia.com
- Why I did it
Remove the need to deal with container orchestration logic from the container itself. Leave this logic to the orchestrator - host OS.
- How I did it
hostcfgd configures 'Restart=' value for systemd service.
- How to verify it
root@r-tigon-11:/home/admin# sudo config feature autorestart lldp enabled
root@r-tigon-11:/home/admin# show feature status | grep lldp
lldp enabled enabled
root@r-tigon-11:/home/admin# docker exec -it lldp pkill -9 lldpd
root@r-tigon-11:/home/admin# docker ps -a | grep lldp
65058396277c docker-lldp:latest "/usr/bin/docker-lld…" 2 days ago Exited (0) 20 seconds ago lldp
root@r-tigon-11:/home/admin# docker ps -a | grep lldp
65058396277c docker-lldp:latest "/usr/bin/docker-lld…" 2 days ago Up 5 seconds lldp
root@r-tigon-11:/home/admin# sudo config feature autorestart lldp disabled
root@r-tigon-11:/home/admin# docker exec -it lldp pkill -9 lldpd
root@r-tigon-11:/home/admin# docker ps -a | grep lldp
65058396277c docker-lldp:latest "/usr/bin/docker-lld…" 2 days ago Up 35 seconds lldp
root@r-tigon-11:/home/admin# docker ps -a | grep lldp
65058396277c docker-lldp:latest "/usr/bin/docker-lld…" 2 days ago Exited (0) 3 seconds ago lldp
root@r-tigon-11:/home/admin# docker ps -a | grep lldp
65058396277c docker-lldp:latest "/usr/bin/docker-lld…" 2 days ago Exited (0) 39 seconds ago lldp
root@r-tigon-11:/home/admin#
#### Why I did it
- To build flashrom properly with dependency tracking.
#### How I did it
- Moved flashrom code from platform/broadcom/sonic-platform-modules-dell/tools directory to src/flashrom directory.
- At the end, flashrom_0.9.7_amd64.deb package is build which will be installed in the devices.
- Currently flashrom builds only for Dell S6100 platforms.
Introduce new sonic-buildimage images for Broadcom DNX ASIC family.
sonic-broadcom-dnx.bin
sonic-aboot-broadcom-dnx.swi
How I did it
NO CHANGE to existing make commands
make init; make configure PLATFORM=broadcom; make target/sonic-aboot-broadcom.swi; make target/sonic-broadcom.bin
The difference now is that it will result in new broadcom images for DNX asic family as well.
sonic-broadcom.bin, sonic-broadcom-dnx.bin
sonic-aboot-broadcom.swi, sonic-aboot-broadcom-dnx.swi
Note: This PR also adds support for Broadcom SAI 5.0 (based on 1.8 SAI ) for DNX based platform + changes in platform x86_64-arista_7280cr3_32p4 bcm config files and platform_env.conf files
#### Why I did it
Following the discussion in another PR https://github.com/Azure/sonic-buildimage/pull/7708#discussion_r642933510 , since there will be multi subfolders under **/var/log/mellanox**, so we agreed to only mount this folder and the subfolders will be created afterward on demand.
#### How I did it
during the syncd docker creation, only mount folder **/var/log/mellanox**
#### How to verify it
build an Mellanox image and verify the related folder on the host and docker side.
#### Why I did it
Create a target for delayed service timers. Few services in sonic have delayed to speed up the bring up of the system and essential services. However there is no way to track when they start. This will be a problem when executing config reload as config reload expects all services to be up. Hence grouped all the timers that trigger the delayed services under one target so that they could be tracked in 'config reload' command
#### How I did it
Created delay.target service and add created dependency on the delayed targets.
Why I did it
The SONiC switches get their docker images from local repo, populated during install with container images pre-built into SONiC FW. With the introduction of kubernetes, new docker images available in remote repo could be deployed. This requires dockerd to be able to pull images from remote repo.
Depending on the Switch network domain & config, it may or may not be able to reach the remote repo. In the case where remote repo is unreachable, we could potentially make Kubernetes server to also act as http-proxy.
How I did it
When admin explicitly enables, the kubernetes-server could be configured as docker-proxy. But any update to docker-proxy has to be via service-conf file environment variable, implying a "service restart docker" is required. But restart of dockerd is vey expensive, as it would restarts all dockers, including database docker.
To avoid dockerd restart, pre-configure an http_proxy using an unused IP. When k8s server is enabled to act as http-proxy, an IP table entry would be created to direct all traffic to the configured-unused-proxy-ip to the kubernetes-master IP. This way any update to Kubernetes master config would be just manipulating IPTables, which will be transparent to all modules, until dockerd needs to download from remote repo.
How to verify it
Configure a switch such that image repo is unreachable
Pre-configure dockerd with http_proxy.conf using an unused IP (e.g. 172.16.1.1)
Update ctrmgrd.service to invoke ctrmgrd.py with "-p" option.
Configure a k8s server, and deploy an image for feature with set_owner="kube"
Check if switch could successfully download the image or not.
Why I did it
This PR adds changes in sonic-config-engine to consume configuration data in SONiC Yang schema and generate config_db entries
How I did it
Add a new file sonic_yang_cfg_generator .
This file has the functions to
parse yang data json and convert them in config_db json format.
Validate the converted config_db entries to make sure all the dependencies and constraints are met.
Add a new option -Y to the sonic-cfggen command for this purpose
Add unit tests
This capability is support only in sonic-config-engine Python3 package only
Signed-off-by: Yong Zhao yozhao@microsoft.com
Why I did it
Currently we leveraged the Supervisor to monitor the running status of critical processes in each container and it is more reliable and flexible than doing the monitoring by Monit. So we removed the functionality of monitoring the critical processes by Monit.
How I did it
I removed the script process_checker and corresponding Monit configuration entries of critical processes.
How to verify it
I verified this on the device str-7260cx3-acs-1.
Why I did it
In upgrade scenarios, where config_db.json is not carry forwarded to new image, it could be left w/o TACACS credentials.
Added a service to trigger 5 minutes after boot and restore TACACS, if /etc/sonic/old_config/tacacs.json is present.
How I did it
By adding a service, that would fire 5 mins after boot.
This service apply tacacs if available.
How to verify it
Upgrade and watch status of tacacs.timer & tacacs.service
You may create /etc/sonic/old_config/tacacs.json, with updated credentials
(before 5mins after boot) and see that appears in config & persisted too.
Which release branch to backport (provide reason below if selected)
201911
202006
202012
Signed-off-by: Yong Zhao yozhao@microsoft.com
Why I did it
This PR aims to monitor the memory usage of streaming telemetry container and restart streaming telemetry container if memory usage is larger than the pre-defined threshold.
How I did it
I borrowed the system tool Monit to run a script memory_checker which will periodically check the memory usage of streaming telemetry container. If the memory usage of telemetry container is larger than the pre-defined threshold for 10 times during 20 cycles, then an alerting message will be written into syslog and at the same time Monit will run the script restart_service to restart the streaming telemetry container.
How to verify it
I verified this implementation on device str-7260cx3-acs-1.
- Why I did it
To give SONiC Application Extension developers an environment to run and develop their apps.
- How I did it
Created sonic-sdk and sonic-sdk-buildenv dockers and their dbg versions.
- How to verify it
Build:
$ make -f slave target/sonic-sdk.gz target/sonic-sdk-buildenv.gz
Map priority 0 to TC 1 and priority 1 to TC 0
Send traffic on priority 0 and 1 and verified that it gets mapped correctly in hw
Signed-off-by: Neetha John <nejo@microsoft.com>
Signed-off-by: Stepan Blyschak stepanb@nvidia.com
This PR is part of SONiC Application Extension
Depends on #5938
- Why I did it
To provide an infrastructure change in order to support SONiC Application Extension feature.
- How I did it
Label every installable SONiC Docker with a minimal required manifest and auto-generate packages.json file based on
installed SONiC images.
- How to verify it
Build an image, execute the following command:
admin@sonic:~$ docker inspect docker-snmp:1.0.0 | jq '.[0].Config.Labels["com.azure.sonic.manifest"]' -r | jq
Cat /var/lib/sonic-package-manager/packages.json file to verify all dockers are listed there.
Fix#7364
99-default.link - was always in SONiC, but previous systemd (<247) had an issue and it did not work due to issue systemd/systemd#3374. Now systemd 247 works.
However, such policy overrides teamd provided mac address which causes teamd netdev to use a random mac
address. Therefore, needs to be disabled.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
#### Why I did it
To build flashrom properly with dependency tracking.
#### How I did it
Moved flashrom code from platform/broadcom/sonic-platform-modules-dell/tools directory to src/flashrom directory.
At the end, flashrom_0.9.7_amd64.deb package is build which will be installed in the devices.
- Support compile sonic arm image on arm server. If arm image compiling is executed on arm server instead of using qemu mode on x86 server, compile time can be saved significantly.
- Add kernel argument systemd.unified_cgroup_hierarchy=0 for upgrade systemd to version 247, according to #7228
- rename multiarch docker to sonic-slave-${distro}-march-${arch}
Co-authored-by: Xianghong Gu <xgu@centecnetworks.com>
Co-authored-by: Shi Lei <shil@centecnetworks.com>
Signed-off-by: vedganes <vedavinayagam.ganesan@nokia.com>
Changes for setting platfrom specific lag id boundary id in the chassis
app db. The platfrom specific lag id boundaries are supplied via
chassisdb.conf. The lag_id_start and lag_id_end boundary values sourced
from this file are set in chassis app db which will be used by lag id
allocator to allocate unique lag id in atomic fashion
- Why I did it
I made the docker_img_ctl.j2 applicable for more dockers (including application extensions dockers) by adding an option not to mount tmpfs on /tmp/ and /var/tmp/. In some applications /tmp/ is a different docker volume which can't be tmpfs.
Also, I added and ability to pass REPO[:TAG]|[@digest]/IMAGE_ID instead of just REPO name.
- How I did it
Modified docker_img_ctl.j2 and docker makefiles.
- How to verify it
Run it on the switch.
- Why I did it
To allow SONiC Package Migration during SONiC-2-SONiC upgrade we need to start docker daemon in chroot-ed environment in new SONiC filesystem.
Later this script will be used to start dockerd in chroot environment on SONiC
- How I did it
Install a docker service script into /usr/lib/docker/ in SONiC filesystem.
- How to verify it
Install SONiC image on the switch, mount squashfs to some directory, mount overlay rw layer over squashfs, mount procfs and sysfs, mount docker library. Start the docker using:
root@sonic:~$ /usr/lib/docker/docker.sh start
Signed-off-by: Stepan Blyshchak <stepanb@nvidia.com>
Why I did it
We skip install of CNI plugin, as we don't need. But this leaves node in "not ready" state, upon joining master.
To fix, we copy this dummy .conf file in /etc/cni/net.d
How I did it
Keep this file in /usr/share/sonic/templates and copy to /etc/cni/net.d upon joining k8s master.
How to verify it
Upon configuring master-IP and enable join, watch node join and move to ready state.
You may verify using kubectl get nodes command
SONiC Package Manager will require to auto-generate the start script using that template. For that, we need this template to be recorded in SONiC filesystem.
Signed-off-by: Stepan Blyshchak <stepanb@nvidia.com>
- Why I did it
Group all SONiC services together and able to manage them together. Will be used in config reload command as much simpler and generic way to restart services.
- How I did it
Add services to sonic.target
- How to verify it
Together with Azure/sonic-utilities#1199
config reload -y
Signed-off-by: Stepan Blyshchak <stepanb@nvidia.com>
- Why I did it
The pcie configuration file location is under plugin directory not under platform directory.
#6437
- How I did it
Move all pcie.yaml configuration file from plugin to platform directory.
Remove unnecessary timer to start pcie-check.service
Move pcie-check.service to sonic-host-services
- How to verify it
Verify on the device
* Add *MUX_CABLE_TABLE* to set of tables to clear on SWSS start, which
will clear HW_MUX_CABLE_TABLE and MUX_CABLE_TABLE
* Order swss to start before pmon to ensure that DBs are cleared before
xcvrd (running inside pmon) starts and re-populates the tables
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
Fix marvell-armhf build break
The azure-storage package depends on the cryptography package. Newer
versions of cryptography require the rust compiler, the correct version
for which is not readily available in buster. Hence we pre-install an
older version here to satisfy the azure-storage dependency.
Note: This is not a problem for other architectures as pre-built versions
of cryptography are available for those. This sequence can be removed
after upgrading to debian bullseye.
**- Why I did it**
To support FW upgrade on init.
**- How I did it**
Change timeout value
**- How to verify it**
I manually changed ASIC and Gearbox FW followed by hard reset in order for FW upgrade to take place on init.
Signed-off-by: liora <liora@nvidia.com>
- Why I did it
To move ‘sonic-host-service’ which is currently built as a separate package to ‘sonic-host-services' package.
- How I did it
- Moved 'sonic-host-server' to 'src/sonic-host-services' and included it as part of the python3 wheel.
- Other files were moved to 'src/sonic-host-services-data' and included as part of the deb package.
- Changed build option ‘INCLUDE_HOST_SERVICE’ to ‘ENABLE_HOST_SERVICE_ON_START’ for enabling sonic-hostservice at boot-up by default.
[multi_asic][vs]: Add dependency in teamd service to start after topology service.
- Why I did it
In multi-asic VS, topology service is run after database service to set up the internal asic topology.
swss and syncd have a dependency to start after topology service is run so that the interfaces are moved to right namespace and created in the right namespace. In case of multi-asic vs, during the initial boot up, when there is no configuration added, teamd service starts and swss/syncd do not start as topology service does not start. Upon loading configuration using config_db or minigraph, swss and sycnd start up , but teamd is not restarted as swss is not stopped and started. This causes teamd to be in a bad state and requires a reload of config.
- How I did it
Add dependency in teamd service to start after topology service is completed.
- How to verify it
No change in single asic vs or platform.
No change in multi-asic regular image.
Change only in multi-asic VS. Bring up a multi-asic VS image without any configration, teamd service will fail to start due to dependency failure. Load minigraph, start topology service, load configuration, ensure all services come up.
Signed-off-by: SuvarnaMeenakshi <sumeenak@microsoft.com>
Following changes were done for ebtables:
- Support for Multi-asic platforms. Ebtable filters are installed in namespace for multi-asic and not host. On Single asic installed on host.
- For Multi-asic platforms we don't want to install on host otherwise Namespace-to-Namespace communication does not happens since ARP Request are not forwarded.
- Updated to use text file to restore ebtables rules then the binary format. Rules are restore as part of Database docker init instead of rc.local
- Removed the ebtable service files for buster as not needed as filters are restored/installed as part of database docker init.
All the binaries are pre-installed with ebtables* binary are same as ebatbles-legacy-*
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
The Portchannels were not getting cleaned up as the cleanup activity was taking more than 10 secs which is default docker timeout after which a SIGKILL will be send.
Fixes#6199
To check if it works out for this issue in 201911 ? #6503
This issue is significantly seen in master branch compared to 201911 because the Portchannel cleanup takes more time in master. Test on a DUT with 8 Port Channels.
master
admin@str-s6000-acs-8:~$ time sudo systemctl stop teamd
real 0m15.599s
user 0m0.061s
sys 0m0.038s
Sonic 201911.v58
admin@str-s6000-acs-8:~$ time sudo systemctl stop teamd
real 0m5.541s
user 0m0.020s
sys 0m0.028s
**- Why I did it**
This PR aims to monitor the running status of each container. Currently the auto-restart feature was enabled. If a critical process exited unexpected, the container will be restarted. If the container was restarted 3 times during 20 minutes, then it will not run anymore unless we cleared the flag using the command `sudo systemctl reset-failed <container_name>` manually.
**- How I did it**
We will employ Monit to monitor a script. This script will generate the expected running container list and compare it with the current running containers. If there are containers which were expected to run but were not running, then an alerting message will be written into syslog.
**- How to verify it**
I tested this feature on a lab device `str-a7050-acs-3` which has single ASIC and `str2-n3164-acs-3` which has a Multi-ASIC. First I manually stopped a container by running the command `sudo systemctl stop <container_name>`, then I checked whether there was an alerting message in the syslog.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
- Make PDDF code compliant with both Python 2 and Python 3
- Align code with PEP8 standards using autopep8
- Build and install both Python 2 and Python 3 PDDF packages
swss/teamd/syncd services were changed to always enabled
in commit fad481edc1 as a workaround
for not letting hostcfgd start service during the bootup process.
commit 317a4b3410 introduce
wait till full system bootup before updating feature states in hostcfgd.
Thus, workaround introduced in commit fad481ed can be removed
Signed-off-by: Guohan Lu <lguohan@gmail.com>
Signed-off-by: Prabhu Sreenivasan prabhu.sreenivasan@broadcom
What I did
Added support for snat, dnat and ipmc resources under CRM module.
How I did it
New feature NAT adds new resources snat_enty and dnat_entry that needs to be monitored. ipmc_entry tracks IP multicast resources used by switch.
How to verify it
sonic-utilities tests and crm spytest
* First cut image update for kubernetes support.
With this,
1) dockers dhcp_relay, lldp, pmon, radv, snmp, telemetry are enabled
for kube management
init_cfg.json configure set_owner as kube for these
2) Each docker's start.sh updated to call container_startup.py to register going up
As part of this call, it registers the current owner as local/kube and its version
The images are built with its version ingrained into image during build
3) Update all docker's bash script to call 'container start/stop/wait' instead of 'docker start/stop/wait'.
For all locally managed containers, it calls docker commands, hence no change for locally managed.
4) Introduced a new ctrmgrd service, that helps with transition between owners as kube & local and carry over any labels update from STATE-DB to API server
5) hostcfgd updated to handle owner change
6) Reboot scripts are updatd to tag kube running images as local, so upon reboot they run the same image.
7) Added kube_commands.py to handle all updates with Kubernetes API serrver -- dedicated for k8s interaction only.
Added source interface support for NTP.
Also made NTP start on Mgmt-VRF by default when configured.
**- How I did it**
1) Updated hostcfg to listen to global config NTP and NTP_SERVER tables and restart ntp when ever the configuration changes. NTP table includes source interface configuration.
2) The ntp script updated to by default start on Mgmt-VFT when configured.
Signed-off-by: Prabhu Sreenivasan <prabhu.sreenivasan@broadcom>
Fixes#5663
- Why I did it
It's currently possible for the SNMP timer to conflict with config reload (specifically if the timer triggers while config reload is stopping the SWSS service). config reload triggers SWSS to shutdown, which causes SNMP to shutdown, which conflicts with the SNMP timer causing SNMP to startup. See the linked issue for more details.
- How I did it
Including the After ordering dependency forces the SNMP timer to wait until SWSS finishes stopping, preventing the conflict. If there is an ordering dependency between two units (e.g. one unit is ordered After another), if one unit is shutting down while the other is starting up, the shutdown will always be ordered before the startup. In this case, that means that the SNMP timer is forced to wait for the SWSS shutdown to complete. Only then can the SNMP timer proceed. See here for more details.
It's important to note that the After dependency will not cause SWSS to be started when the SNMP timer fires (assuming that SWSS has not yet been started). The existing Requisite dependency in the SNMP service will also not cause SWSS to be started, instead it will cause the SNMP service to fail if SWSS is not active.
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
Install the 'wheel' package in host OS (along with python3 and python3-distutils which are also needed for building some Python packages) to eliminate error messages like the following:
```
Running setup.py bdist_wheel for watchdog: started
Running setup.py bdist_wheel for watchdog: finished with status 'error'
Complete output from command /usr/bin/python -u -c "import setuptools, tokenize;__file__='/tmp/pip-install-Qd3K08/watchdog/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" bdist_wheel -d /tmp/pip-wheel-0AHpMe --python-tag cp27:
usage: -c [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...]
or: -c --help [cmd1 cmd2 ...]
or: -c --help-commands
or: -c cmd --help
error: invalid command 'bdist_wheel'
----------------------------------------
Failed building wheel for watchdog
```
These error messages appear to have no impact on the image build, because the Python package seems to still get installed successfully afterward, just the building of a wheel package fails. Therefore, this is more of a cosmetic fix than an actual bug.
This is an addendum to https://github.com/Azure/sonic-buildimage/pull/6182.
Also upgrade pip and install more recent version of setuptools package via PyPI.
libxslt-dev and libz-dev are dependencies for lxml==4.6.1 which is required for pyangbind==0.8.1
lxml-4.6.2-cp37-cp37m-manylinux1_x86_64.whl is directly downloaded in amd64 whereas in arm this is built from lxml-4.6.2.tar.gz
Signed-off-by: Sabareesh Kumar Anandan <sanandan@marvell.com>
**- Why I did it**
To support dynamic buffer calculation.
This PR also depends on the following PRs for sub modules
- [sonic-swss: [buffermgr/bufferorch] Support dynamic buffer calculation #1338](https://github.com/Azure/sonic-swss/pull/1338)
- [sonic-swss-common: Dynamic buffer calculation #361](https://github.com/Azure/sonic-swss-common/pull/361)
- [sonic-utilities: Support dynamic buffer calculation #973](https://github.com/Azure/sonic-utilities/pull/973)
**- How I did it**
1. Introduce field `buffer_model` in `DEVICE_METADATA|localhost` to represent which buffer model is running in the system currently:
- `dynamic` for the dynamic buffer calculation model
- `traditional` for the traditional model in which the `pg_profile_lookup.ini` is used
2. Add the tables required for the feature:
- ASIC_TABLE in platform/\<vendor\>/asic_table.j2
- PERIPHERAL_TABLE in platform/\<vendor\>/peripheral_table.j2
- PORT_PERIPHERAL_TABLE on a per-platform basis in device/\<vendor\>/\<platform\>/port_peripheral_config.j2 for each platform with gearbox installed.
- DEFAULT_LOSSLESS_BUFFER_PARAMETER and LOSSLESS_TRAFFIC_PATTERN in files/build_templates/buffers_config.j2
- Add lossless PGs (3-4) for each port in files/build_templates/buffers_config.j2
3. Copy the newly introduced j2 files into the image and rendering them when the system starts
4. Update the CLI options for buffermgrd so that it can start with dynamic mode
5. Fetches the ASIC vendor name in orchagent:
- fetch the vendor name when creates the docker and pass it as a docker environment variable
- `buffermgrd` can use this passed-in variable
6. Clear buffer related tables from STATE_DB when swss docker starts
7. Update the src/sonic-config-engine/tests/sample_output/buffers-dell6100.json according to the buffer_config.j2
8. Remove buffer pool sizes for ingress pools and egress_lossy_pool
Update the buffer settings for dynamic buffer calculation
python2 is end of life and SONiC is going to support python3. This PR is going to support:
1. Mellanox SONiC platform API python3 support
2. Install both python2 and python3 verson of Mellanox SONiC platform API or pmon and host side
ntp-systemd-wrapper file from files/image_config/ntp was not getting picked up. Added a line on sonic_debian_extension.j2 to copy over the file from files/image_config/ntp after installing the debian package.
Signed-off-by: Prabhu Sreenivasan <prabhu.sreenivasan@broadcom.com>
- Allow platform specific reboot script to be called after crash kernel has
finished copying the kernel vmcore
- Disable pcie advanced features when running crash kernel. This improves
reliability of the crash kernel to successfully create a vmcore and also
reboot
- Allow crash kernel to reboot if a panic is seen while it is generating a
vmcore
- Fix crash kernel to use the SONiC specific /usr/local/bin/reboot script
instead of the Linux reboot command /sbin/reboot
- Use sonic_platform as the kernel command line parameter to pass platform identifier string
Signed-off-by: Rajendra Dendukuri <rajendra.dendukuri@broadcom.com>
The service crash when the platform boots due to missing waits.
/usr/bin/database.sh tries to operate on a missing socket and fails.
We now wait for the chassis database to be ready the same way we do database.
Barefoot platform vendors' sonic_platform packages import the Python 'thrift' library. Previously, our custom-built package was being installed in the PMon container and host OS. However, we are only building a Python 2 version of that package, which was only intended for use with saithrift.
Fixes#6077
Under certain conditions, the sFlow service can start before
interface configurations are sucessfully applied. This will
cause hsflowd to get a socket error.
This fix ensures all interface configurations are successfully
applied before the sFlow service (hsflowd) starts.
During testing we saw this error from hsflowd if interface configs were not successfully applied before hsflowd started.
ERR sflow#hsflowd: socket sendto error: Network is unreachable
no FLOW samples can be seen. This can be consistently reproducible if you force sFlow service to start before interface-config.service.
Signed-off-by: Garrick He <garrick_he@dell.com>
Submodule updates include the following commits:
* src/sonic-utilities 9dc58ea...f9eb739 (18):
> Remove unnecessary calls to str.encode() now that the package is Python 3; Fix deprecation warning (#1260)
> [generate_dump] Ignoring file/directory not found Errors (#1201)
> Fixed porstat rate and util issues (#1140)
> fix error: interface counters is mismatch after warm-reboot (#1099)
> Remove unnecessary calls to str.decode() now that the package is Python 3 (#1255)
> [acl-loader] Make list sorting compliant with Python 3 (#1257)
> Replace hard-coded fast-reboot with variable. And some typo corrections (#1254)
> [configlet][portconfig] Remove calls to dict.has_key() which is not available in Python 3 (#1247)
> Remove unnecessary conversions to list() and calls to dict.keys() (#1243)
> Clean up LGTM alerts (#1239)
> Add 'requests' as install dependency in setup.py (#1240)
> Convert to Python 3 (#1128)
> Fix mock SonicV2Connector in python3: use decode_responses mode so caller code will be the same as python2 (#1238)
> [tests] Do not trim from PATH if we did not append to it; Clean up/fix shebangs in scripts (#1233)
> Updates to bgp config and show commands with BGP_INTERNAL_NEIGHBOR table (#1224)
> [cli]: NAT show commands newline issue after migrated to Python3 (#1204)
> [doc]: Update Command-Reference.md (#1231)
> Added 'import sys' in feature.py file (#1232)
* src/sonic-py-swsssdk 9d9f0c6...1664be9 (2):
> Fix: no need to decode() after redis client scan, so it will work for both python2 and python3 (#96)
> FieldValueMap `contains`(`in`) will also work when migrated to libswsscommon(C++ with SWIG wrapper) (#94)
- Also fix Python 3-related issues:
- Use integer (floor) division in config_samples.py (sonic-config-engine)
- Replace print statement with print function in eeprom.py plugin for x86_64-kvm_x86_64-r0 platform
- Update all platform plugins to be compatible with both Python 2 and Python 3
- Remove shebangs from plugins files which are not intended to be executable
- Replace tabs with spaces in Python plugin files and fix alignment, because Python 3 is more strict
- Remove trailing whitespace from plugins files
Added new flag value 'always_enabled' for the state and auto-restart field of feature table
init_cfg.json is updated to initialize state field of database/swss/syncd/teamd feature and auto-restart field of database feature
as always_enabled
Once the state/auto-restart value is initialized as "always_enabled" it is immutable and cannot be change via feature config commands. (config feature..) PR#Azure/sonic-utilities#1271
hostcfgd will not take any action if state field value is 'always_enabled'
Since we have always_enabled field for auto-restart updated supervisor-proc-exit-listener
not to have special check for database and always rely on value from Feature table.
- Why I did it
Add reboot history to State db so that can be used telemetry service
- How I did it
Split the process-reboot-cause service to determine-reboot-cause and process-reboot-cause
determine-reboot-cause to determine the reboot cause
process-reboot-cause to parse the reboot cause files and put the reboot history to state db
Moved to sonic-host-service* packages
- How to verify it
Performed unit test and tested on DUT
Summary: Move teamd functions to a new service script
Motivation: To segregate teamd functions in one common place. fast-reboot script calls teamd functions that should ideally be replaced by a simple call to a service script.
Changes: New teamd service script and path modification from /usr/bin/teamd.sh to /usr/local/bin/teamd.sh
fast-reboot script (in sonic-utilities) modification (to use new teamd.sh to stop teamd) should follow soon after this change.
Verification: VS image tests.
Signed-off-by: Vaibhav Hemant Dixit <vaibhav.dixit@microsoft.com>
Co-authored-by: heidi.ou@alibaba-inc.com <heidi.ou@alibaba-inc.com>
Co-authored-by: Ying Xie <ying.xie@microsoft.com>
This change introduces PDDF which is described here: https://github.com/Azure/SONiC/pull/536
Most of the platform bring up effort goes in developing the platform device drivers, SONiC platform APIs and validating them. Typically each platform vendor writes their own drivers and platform APIs which is very tailor made to that platform. This involves writing code, building, installing it on the target platform devices and testing. Many of the details of the platform are hard coded into these drivers, from the HW spec. They go through this cycle repetitively till everything works fine, and is validated before upstreaming the code.
PDDF aims to make this platform driver and platform APIs development process much simpler by providing a data driven development framework. This is enabled by:
JSON descriptor files for platform data
Generic data-driven drivers for various devices
Generic SONiC platform APIs
Vendor specific extensions for customisation and extensibility
Signed-off-by: Fuzail Khan <fuzail.khan@broadcom.com>
* Remove 'backend' from device type strings so that backend devices ('BackEndToRRouter' and 'BackEndLeafRouter') are given the same cable lengths as regular device types.
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
Treat devices that are ToRRouters (ToRRouters and BackEndToRRouters) the same when rendering templates
Except for BackEndToRRouters belonging to a storage cluster, since these devices have extra sub-interfaces created
Treat devices that are LeafRouters (LeafRouters and BackEndLeafRouters) the same when rendering templates
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
API getMount() API was not updated to handle multi-asic platforms
Updated API getMount() to return abspath() for Docker Mount Point
and use that one for mount point comparison
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
To consolidate host services and install via packages instead of file-by-file, also as part of migrating all of SONiC to Python 3, as Python 2 is no longer supported.
- Convert core_uploader.py script to Python 3
- Use logger from sonic-py-common for uniform logging
- Reorganize imports alphabetically per PEP8 standard
- Two blank lines precede functions per PEP8 standard
- Remove unnecessary global variable declarations
* Build and install openssh from source
* Copy openssh deb package to dest folder
* Update make rule
* Update sonic debian extension
* Append empty line before EOF
* Update openssh patch
* Add openssh-server to base image dependency
* Fix indent type
* Fix comments
* Use commit id instead of tag id and add comment
Signed-off-by: Jing Kan jika@microsoft.com
As part of the transition from Python 2 to Python 3, we are installing both pip2 and pip3 in the slave and config-engine containers. This PR replaces calls to `pip` in these containers with an explicit call to `pip2` to ensure the proper version of pip is executed, no matter which version of pip is aliased to `pip`, as we no longer rely on that alias.
Also some other pip-related cleanup
To consolidate host services and install via packages instead of file-by-file, also as part of migrating all of SONiC to Python 3, as Python 2 is no longer supported, convert caclmgrd to Python 3 and add to sonic-host-services package
remove syncd from critical process list because
gbsyncd process will exit for platform without
gearbox.
closes#5623
Signed-off-by: Guohan Lu <lguohan@gmail.com>
The orchagent and syncd need to have the same default synchronous mode configuration. This PR adds a template file to translate the default value in CONFIG_DB (empty field) to an explicit mode so that the orchagent and syncd could have the same default mode.
**- Why I did it**
Install all host services and their data files in package format rather than file-by-file
**- How I did it**
- Create sonic-host-services Python wheel package, currently including procdockerstatsd
- Also add the framework for unit tests by adding one simple procdockerstatsd test case
- Create sonic-host-services-data Debian package which is responsible for installing the related systemd unit files to control the services in the Python wheel. This package will also be responsible for installing any Jinja2 templates and other data files needed by the host services.
use correct chassisdb.conf path while bringing up chassis_db service on VoQ modular switch.chassis_db service on VoQ modular switch.
resolves#5631
Signed-off-by: Honggang Xu <hxu@arista.com>
bring up chassisdb service on sonic switch according to the design in
Distributed Forwarding in VoQ Arch HLD
Signed-off-by: Honggang Xu <hxu@arista.com>
**- Why I did it**
To bring up new ChassisDB service in sonic as designed in ['Distributed forwarding in a VOQ architecture HLD' ](90c1289eaf/doc/chassis/architecture.md).
**- How I did it**
Implement the section 2.3.1 Global DB Organization of the VOQ architecture HLD.
**- How to verify it**
ChassisDB service won't start without chassisdb.conf file on the existing platforms.
ChassisDB service is accessible with global.conf file in the distributed arichitecture.
Signed-off-by: Honggang Xu <hxu@arista.com>
We were building our own python-click package because we needed features/bug fixes available as of version 7.0.0, but the most recent version available from Debian was in the 6.x range.
"Click" is needed for building/testing and installing sonic-utilities. Now that we are building sonic-utilities as a wheel, with Click specified as a dependency in the setup.py file, setuptools will install a more recent version of Click in the sonic-slave-buster container when building the package, and pip will install a more recent version of Click in the host OS of SONiC when installing the sonic-utilities package. Also, we don't need to worry about installing the Python 2 or 3 version of the package, as the proper one will be installed as necessary.
* system health first commit
* system health daemon first commit
* Finish healthd
* Changes due to lower layer logic change
* Get ASIC temperature from TEMPERATURE_INFO table
* Add system health make rule and service files
* fix bugs found during manual test
* Change make file to install system-health library to host
* Set system LED to blink on bootup time
* Caught exceptions in system health checker to make it more robust
* fix issue that fan/psu presence will always be true
* fix issue for external checker
* move system-health service to right after rc-local service
* Set system-health service start after database service
* Get system up time via /proc/uptime
* Provide more information in stat for CLI to use
* fix typo
* Set default category to External for external checker
* If external checker reported OK, save it to stat too
* Trim string for external checker output
* fix issue: PSU voltage check always return OK
* Add unit test cases for system health library
* Fix LGTM warnings
* fix demo comments: 1. get boot up timeout from monit configuration file; 2. set system led in library instead of daemon
* Remove boot_timeout configuration because it will get from monit config file
* Fix argument miss
* fix unit test failure
* fix issue: summary status is not correct
* Fix format issues found in code review
* rename th to threshold to make it clearer
* Fix review comment: 1. add a .dep file for system health; 2. deprecated daemon_base and uses sonic-py-common instead
* Fix unit test failure
* Fix LGTM alert
* Fix LGTM alert
* Fix review comments
* Fix review comment
* 1. Add relevant comments for system health; 2. rename external_checker to user_define_checker
* Ignore check for unknown service type
* Fix unit test issue
* Rename user define checker to user defined checker
* Rename user_define_checkers to user_defined_checkers for configuration file
* Renmae file user_define_checker.py -> user_defined_checker.py
* Fix typo
* Adjust import order for config.py
Co-authored-by: Joe LeVeque <jleveque@users.noreply.github.com>
* Adjust import order for src/system-health/health_checker/hardware_checker.py
Co-authored-by: Joe LeVeque <jleveque@users.noreply.github.com>
* Adjust import order for src/system-health/scripts/healthd
Co-authored-by: Joe LeVeque <jleveque@users.noreply.github.com>
* Adjust import orders in src/system-health/tests/test_system_health.py
* Fix typo
* Add new line after import
* If system health configuration file not exist, healthd should exit
* Fix indent and enable pytest coverage
* Fix typo
* Fix typo
* Remove global logger and use log functions inherited from super class
* Change info level logger to notice level
Co-authored-by: Joe LeVeque <jleveque@users.noreply.github.com>
* [Multi-Asic] Forward SNMP requests destined to loopback IP, and coming in through the front panel interface
present in the network namespace, to SNMP agent running in the linux host.
* Updates based on comments
* Further updates in docker_image_ctl.j2 and caclmgrd
* Change the variable for net config file.
* Updated the comments in the code.
* No need to clean up the exising NAT rules if present, which could be created by some other process.
* Delete our rule first and add it back, to take care of caclmgrd restart.
Another benefit is that we delete only our rules, rather than earlier approach of "iptables -F" which cleans up all rules.
* Keeping the original logic to clean the NAT entries, to revist when NAT feature added in namespace.
* Missing updates to log_info call.
* buildimage: Add gearbox phy device files and a new physyncd docker to support VS gearbox phy feature
* scripts and configuration needed to support a second syncd docker (physyncd)
* physyncd supports gearbox device and phy SAI APIs and runs multiple instances of syncd, one per phy in the device
* support for VS target (sonic-sairedis vslib has been extended to support a virtual BCM81724 gearbox PHY).
HLD is located at b817a12fd8/doc/gearbox/gearbox_mgr_design.md
**- Why I did it**
This work is part of the gearbox phy joint effort between Microsoft and Broadcom, and is based
on multi-switch support in sonic-sairedis.
**- How I did it**
Overall feature was implemented across several projects. The collective pull requests (some in late stages of review at this point):
https://github.com/Azure/sonic-utilities/pull/931 - CLI (merged)
https://github.com/Azure/sonic-swss-common/pull/347 - Minor changes (merged)
https://github.com/Azure/sonic-swss/pull/1321 - gearsyncd, config parsers, changes to orchargent to create gearbox phy on supported systems
https://github.com/Azure/sonic-sairedis/pull/624 - physyncd, virtual BCM81724 gearbox phy added to vslib
**- How to verify it**
In a vslib build:
root@sonic:/home/admin# show gearbox interfaces status
PHY Id Interface MAC Lanes MAC Lane Speed PHY Lanes PHY Lane Speed Line Lanes Line Lane Speed Oper Admin
-------- ----------- --------------- ---------------- --------------- ---------------- ------------ ----------------- ------ -------
1 Ethernet48 121,122,123,124 25G 200,201,202,203 25G 204,205 50G down down
1 Ethernet49 125,126,127,128 25G 206,207,208,209 25G 210,211 50G down down
1 Ethernet50 69,70,71,72 25G 212,213,214,215 25G 216 100G down down
In addition, docker ps | grep phy should show a physyncd docker running.
Signed-off-by: syd.logan@broadcom.com
We want to let Monit to unmonitor the processes in containers which are disabled in `FEATURE` table such that
Monit will not generate false alerting messages into the syslog.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
buffer_default_*.j2 because of which internal cable length never gets
define and cause failure in test case test_multinpu_cfggen.py
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
Co-authored-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
* Enhanced Feature Table state enable/disbale for multi-asic platforms.
In Multi-asic for some features we can service per asic so we need to
get list of all services.
Also updated logic to return if any one of systemctl command return failure
and make sure syslog of feature getting enable/disable only come when
all commads are sucessful.
Moved the service list get api from sonic-util to sonic-py-common
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
* Make sure to retun None for both service list in case of error.
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
* Return empty list as fail condition
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
* Address Review Comments.
Made init_cfg.json.j2 knowledegable of Feature
service is global scope or per asic scope
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
* Fix merge conflict
* Address Review Comment.
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
Co-authored-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
We are moving toward building all Python packages for SONiC as wheel packages rather than Debian packages. This will also allow us to more easily transition to Python 3.
Python files are now packaged in "sonic-utilities" Pyhton wheel. Data files are now packaged in "sonic-utilities-data" Debian package.
**- How I did it**
- Build and install sonic-utilities as a Python package
- Remove explicit installation of wheel dependencies, as these will now get installed implicitly by pip when installing sonic-utilities as a wheel
- Build and install new sonic-utilities-data package to install data files required by sonic-utilities applications
- Update all references to sonic-utilities scripts/entrypoints to either reference the new /usr/local/bin/ location or remove absolute path entirely where applicable
Submodule updates:
* src/sonic-utilities aa27dd9...2244d7b (5):
> Support building sonic-utilities as a Python wheel package instead of a Debian package (#1122)
> [consutil] Display remote device name in show command (#1120)
> [vrf] fix check state_db error when vrf moving (#1119)
> [consutil] Fix issue where the ConfigDBConnector's reference is missing (#1117)
> Update to make config load/reload backward compatible. (#1115)
* src/sonic-ztp dd025bc...911d622 (1):
> Update paths to reflect new sonic-utilities install location, /usr/local/bin/ (#19)
This PR limited the number of calls to sonic-cfggen to one call
per iteration instead of current 3 calls per iteration.
The PR also installs jq on host for future scripts if needed.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
Introduced a new build parameter 'SONIC_IMAGE_VERSION' that allows build
system users to build SONiC image with a specific version string. If
'SONIC_IMAGE_VERSION' was not passed by the user, SONIC_IMAGE_VERSION will be
set to the output of functions.sh:sonic_get_version function.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
sonic-cfggen is now using Unix Domain Socket for Redis DB. The socket
is created using root account. Subsequently, services that are started
as admin fails to start. This PR creates redis group and add admin
user to redis group. It also grants read/write access on redis.sock
for redis group members.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
management framework provides management plane services like rest and
CLI which is not needed right after boot, instead by delaying this
service we give some more CPU for data plane and control plane services
on fast/warm boot.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Add a master switch so that the sync/async mode can be configured.
Example usage of the switch:
1. Configure mode while building an image
`make ENABLE_SYNCHRONOUS_MODE=y <target>`
2. Configure when the device is running
Change CONFIG_DB with `sonic-cfggen -a '{"DEVICE_METADATA":{"localhost": {"synchronous_mode": "enable"}}}' --write-to-db`
Restart swss with `systemctl restart swss`
- Why I did it
When SONiC is configured with the management framework and/or telemetry services, the applications running inside those containers need to access some functionality on the host system. The following is a non-exhaustive list of such functionality:
Image management
Configuration save and load
ZTP enable/disable and status
Show tech support
- How I did it
The host service is a Python process that listens for requests via D-Bus. It will then service those requests and send a response back to the requestor.
This PR only introduces the host service infrastructure. Applications that need access to the host services must add applets that will register on D-Bus endpoints to service the appropriate functionality.
- How to verify it
- Description for the changelog
Add SONiC Host Service for container to execute select commands in host
Signed-off-by: Nirenjan Krishnan <Nirenjan.Krishnan@dell.com>
startup when doing redis PING since database_config.json getting
generated from jinja2 template is still not ready.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Support for Control Plane ACL's for Multi-asic Platforms.
Following changes were done:
1) Moved from using blocking listen() on Config DB to the select() model
via python-swsscommon since we have to wait on event from multiple
config db's
2) Since python-swsscommon is not available on host added libswsscommon and python-swsscommon
and dependent packages in the base image (host enviroment)
3) Made iptables programmed in all namespace using ip netns exec
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Address Review Comments
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Fix Review Comments
* Fix Comments
* Added Change for Multi-asic to have iptables
rules to accept internal docker tcp/udp traffic
needed for syslog and redis-tcp connection.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Fix Review Comments
* Added more comments on logic.
* Fixed all warning/errors reported by http://pep8online.com/
other than line > 80 characters.
* Fix Comment
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Verified with swsscommon package. Fix issue for single asic platforms.
* Moved to new python package
* Address Review Comments.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Address Review Comments.
