Build Marvell kernel driver for prestera sai sdk
Builds interrupt and dma kernel driver
Removed the older method pre-compiled kernel module debian package and its makefile
* [yang-models]: Remove PLY Extensions and change translation code.
With assumption that TABLE_SEPARATOR and ENTRY_SEPARATOR for configDB is always "|",
translation from configDB.json to sonicYang.json can be done based on keys specified
in YANG Lists inside YANG models. So removing extensions is good idea.
Changes:
-- Remove use of regex in Translation code.
-- Remove regex Extensions from YANG models.
-- Improved debugging i.e. log on stdout in case of any Exception from sonic-yang-mgmt,
so that failed tests can be debugged faster. Also this is good to debug Dynamic
port breakout issues.
-- Minor Test changes.
Co-authored-by: lguohan <lguohan@gmail.com>
IPV4ANY is not valid value, fix to IPv4ANY
without this change, test case failed sometimes when the validation on IP_TYPE happens first and then PACKET_ACTION.
To add latest SAI drop REL_4.3.3.3 to SONIC which addresses the following CSP cases:
CS00012058054: [4.3][IPinIP][TTL-PIPE] IPinIP TTL Pipe Mode is NOT working it is behaving UNIFORM mode even programed as PIPE mode
CS00011227466: [4.3] Warmboot support with tunnel encap
* Updating version of hsflow daemon to apply
fix, which resolves problem of switching
between IPv4 and IPv6, in case when the
IPv4 has deleted for the interface.
The new release of hsflowd contains the fix for the issue: sflow/host-sflow@2703ecb
How I did it
HSFLOWD_VERSION env variable has changed in the rules to be pointed to the latest release of hsflowd.
How to verify it
sudo config sflow enable
sudo config loopback add Loopback1
sudo config int ip add Loopback1 a84f:97ff:fea7:33a5::fe80/64
sudo config int ip add Loopback1 192.168.101.1/24
sudo config sflow agent-id add Loopback1
sudo config sflow collector add Collector1 192.168.101.1
sudo config sflow collector add Collector2 a84f:97ff:fea7:33a5::fe80
use sudo sflowtool -p 6343 -l for checking sflow data
remove and add again the ipv4 entry of Loopback1.
hsflowd should change agent ip from IPv4 to IPv6 and wise versa, depending on IPv4 entry present or not.
Switching between IPs is being performed by hsflowd, based on IP address priority ranking.
Signed-off-by: Maksym Belei <Maksym_Belei@jabil.com>
The file device/mellanox/x86_64-mlnx_msn4410-r0/plugins/sfputil.py is not a software link for device/mellanox/x86_64-mlnx_msn2700-r0/plugins/sfputil.py. And it is still using python2 syntex which causes some SFP CLI error. The PR is to change it to a softlink and add 4410 support in device/mellanox/x86_64-mlnx_msn2700-r0/plugins/sfputil.py.
Fix the following issues:
Spectrum-2, Spectrum-3 | Port | Fix link issue when using 25 GbE rate between two ports while one is on Spectrum-2-based system and the other is on Spectrum-3-based system
All | warmboot | fail to upgrade from earlier SONiC versions with official SDK/FW 4.4.2306 (was on SONiC 201911)
All | What-Just-Happened | When enabling or disabling WJH under high traffic load to the host CPU, in very specific and low probability conditions, an error could occur, that may result in loss of data, channel failure or in extreme cases SW failure
Signed-off-by: Volodymyr Samotiy <volodymyrs@nvidia.com>
* 1ee04fb (HEAD -> master, origin/master, origin/HEAD) Modified the tests to use mock functionality of get_child_port function under portconfig utility (#1464)
* 99d251f Enable PFCWD only on ports where PFC is enabled (#1508)
* eb7945f Warmboot script improvements - timeout exec, disable swss autorestart, remove trap (#1495)
* c7d4947 [show] Fix int status of LAGs, configured as Vlan members (#1478)
Signed-off-by: Maksym Belei <Maksym_Belei@jabil.com>
To improve management of docker-gbsyncd-vs. gbsyncd_startup.py simply spawned syncd processes and then exited. In that case, supervisord would no longer manage any processes in the container, and thus there was no way to know if a critical process had exited.
I recently created gbsyncdmgrd to be a more complete, robust replacement for gbsyncd_startup.py.
NOTE: This PR is dependent on the inclusion of gbsyncdmgrd in the sonic-sairedis repo. A submodule update is pending at
#7089
The default bgp connect retry timer is 120 seconds. A reconnection will happen 120 seconds if the initial connection fails. This PR aims to allow a more frequent retry.
The psample module was not loaded on barefoot platform. The loading of this module is a prerequisite for testing SFlow.
* add `.gitignore` to the `barefoot` subdirectory to overwrite ignore "platform/**/debian/*" in the root directory
Initialize fans and thermals lists on demand; make them properties in order to reduce Chassis object initialization time
Signed-off-by: Volodymyr Boyko <volodymyrx.boiko@intel.com>
Update sonic-sairedis submodule and also update sonic-swss submodule as there are interdependent changes.
* src/sonic-sairedis 13474d1...bc58b0f (12):
> Add gbsyncdmgrd; deprecate gbsyncd_startup.py (#809)
> Remove gbsyncd_start.sh (#808)
> [gbsyncd] Fix shebang in gbsyncd_startup.py; Make script executable (#807)
> [saiasiccmp] Add saiasiccmp tool to compare 2 asic views (#791)
> [configure] Add -Wno-psabi to remove "passing argument changed in GCC 7.1" (#799)
> Update FlexCounter.cpp, use m_pollInterval in MUTEX lock (#797)
> [vs] Add special warm boot logic to populate default attributes (#796)
> [ci]: add vstest (#795)
> [tests] Add macsec unittest (#782)
> [debian/control] libsairedis-dev depends on libzmq5-dev (#794)
> [ci]: use build template (#793)
> Rename duplicate file name (#773)
* src/sonic-swss 0b0d24c...5adb73e (47):
> Initialize system port type variable (#1681)
> [Dynamic Buffer Calc] Enhance the field checking in table handling (#1680)
> Handle the clear request for 'Q_SHARED_ALL' (#1653)
> [MuxOrch] FDB ageout safety check (#1674)
> Deactivate mirror session only when session status is true in updateLagMember (#1666)
> Revert "[buffermgr] Support maximum port headroom checking (#1607)" (#1675)
> reduce severity of log to info in case of flush on non-existing member (#1669)
> Revert "[Dynamic buffer calc] Bug fix: Remove PGs from an administratively down port. (#1652)" (#1676)
> [Dynamic buffer calc] Bug fix: Remove PGs from an administratively down port. (#1652)
> [acl] Move ACL table constants to acltable.h (#1671)
> [nbrmgrd] added function to parse IP address from APP_DB (#1672)
> [MUX/PFCWD] Use in_ports for acls instead of seperate ACL table (#1670)
> [vog/systemlag] Voq lagid allocator (#1603)
> Add table descriptions for dynamic buffer calculation to the documents (#1664)
> [vstest/subintf] Add vs test case to validate processing sequence of APPL DB keys (#1663)
> Remove vxlanmgrd dependency on orchagent (#1647)
> Keep attribute order in bulk mode (#1659)
> [mux] VS test for neigh, route and fdb (#1656)
> [linksync] Netdev oper status determination using IFF_RUNNING (#1568)
> [portorch] parse on/off value from autoneg (#1658)
> [intfsorch] Create subport with the entry contains necessary attributes (#1650)
> [ci]: Purge swss before install (#1654)
> Update StateDB with error if state change failed, Update APP_DB in all state chg req (#1662)
> Added changes to handle dependency check in FdbSyncd and FpmSyncd for warm-boot (#1556)
> [synchronous mode] Add failure notification for SAI failures in synchronous mode (#1596)
> [acl] Enable VLAN ID qualifier for ACL rules (#1648)
> Updated PFCWD to use single ACL table for PFCWD and MUX (#1620)
> [orchagent] Increase SAI REDIS response timeout to support FW upgrade during init (Mellanox only). (#1637)
> [vstest/nhg]: use dvs_route fixture to make test_nhg more robust
> [vstest]: add dvs_route fixture
> [vstest/subintf] Update vs tests to validate physical port host interface vlan tag attribute (#1634)
> Remove useless header in macsecorch (#1628)
> Add SAI_INGRESS_PRIORITY_GROUP_STAT_DROPPED_PACKETS counter, create new FlexCounter group (#1600)
> fixed unsupported resource issue (#1641)
> [test_virtual_chassis]: use wait_for to make test more robust (#1640)
> spell check fixes (#1630)
> [bufferorch] Handle NOT IMPLEMENTED status returned during set attr operation (#1639)
> [ci]: run vstest
> [test_virtual_chassis]: use wait_for function to improve test robustness
> [Mux] Neighbor handling based on FDB entry (#1631)
> [ci]: use build template (#1633)
> Log level change from ERR to INFO for fetch systemports issue (#1632)
> Migrate serdes programming to port serdes object (#1611)
> [tests] Remove legacy saiattributelist.h dependency (#1608)
> [buffermgr] Support maximum port headroom checking (#1607)
> Support shared headroom pool on top of dynamic buffer calculation (#1581)
> Fix the compiling errors in gcc9 (#1621)
- Why I did it
The existing Fan led and Psu led object initialize itself to green color in init method. However, there are multiple daemons calls sonic platform API and there could be a case that:
A PSU is removed from system
Reboot switch
psud detects that 1 PSU is missing and set PSU led to red
Other daemon just start up and call sonic platform API, the API set PSU led to green by call PsuLed.init
This PR is a partial fix for the issue. As we also need guarantee that the led is initialized with a correct value. I checked existing psud and thermalctld code. psud always initialize the PSU led color on boot up, thermalcltd need some changes to initialize led color on the first run
- How I did it
Remove the led color initialization code from FanLed.init and PsuLed.init
- How to verify it
Manual test
c20bf60 Qi Luo Mon Mar 15 14:28:31 2021 -0700 Implement rfc4363 FdbUpdater for lag inside vlan (#203)
292024a abdosi Mon Mar 15 12:15:21 2021 -0700 Updated lldpRemManAddrTable to use all the management ip address associated with interface. (#201)
9b83459 liushilongbuaa Fri Mar 12 14:35:23 2021 +0800 [CI] Setup dummy azure pipeline (#198)
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* 553936b (HEAD, origin/master, origin/HEAD, master) route_check: Fix hanging & logging level (#1520)
* ed45412 [show][config] add support for setting and displaying switching modes on Y cable (#1501)
* bf46638 Handling error scenario of adding port to Vlan which is part of LAG (#1516)
* ae39883 Fix bug: show vlan config for vlan with no members (#1503)
* 3a482ac [test] Update unit test coverage for command 'show mac' (#1504)
* 4a0c010 [config] Disable/enable container monitoring when stopping/starting services (#1499)
Eliminate the need for `gbsyncd_start.sh`, which simply calls `exec "/usr/bin/gbsyncd_startup.py"`. The shell script is unnecessary.
Once this PR merges, we can remove `gbsyncd_start.sh` from the sonic-sairedis repo.
Why I did it
It was observed that on a multi-asic DUT bootup, the BGP internal sessions between ASIC's was taking more time to get ESTABLISHED than external BGP sessions. The internal sessions was coming up almost exactly 120 secs later.
In multi-asic platform the bgp dockers ( which is per ASIC ) on switch start are bring brought up around the same time and they try to make the bgp sessions with neighbors (in peer ASIC's) which may be not be completely up. This results in BGP connect fail and the retry happens after 120sec which is the default Connect Retry Timer
How I did it
Add the command to set the bgp neighboring session retry timer to 10sec for internal bgp neighbors.
- Why I did it
I made the docker_img_ctl.j2 applicable for more dockers (including application extensions dockers) by adding an option not to mount tmpfs on /tmp/ and /var/tmp/. In some applications /tmp/ is a different docker volume which can't be tmpfs.
Also, I added and ability to pass REPO[:TAG]|[@digest]/IMAGE_ID instead of just REPO name.
- How I did it
Modified docker_img_ctl.j2 and docker makefiles.
- How to verify it
Run it on the switch.
As discussed in the yang subgroup community meeting, this change is bring consistent naming-conventions for all different type of interfaces in sonic-yang-model. Particularly the key-attribute name. Since the relevant interface container does have a context about that interface, having a simple & clear key-attribute name will be sufficient. For e.g. PORT/PORT_LIST/port_name has been renamed as PORT/PORT_LIST/name. Similar changes are done for portchannel, VLAN & loopback interfaces as well.
There was a change to replace platform utils with sonic platform API in psuutil. However, psu API is not initialized on host side. The PR is to fix it.
- Why I did it
To allow SONiC Package Migration during SONiC-2-SONiC upgrade we need to start docker daemon in chroot-ed environment in new SONiC filesystem.
Later this script will be used to start dockerd in chroot environment on SONiC
- How I did it
Install a docker service script into /usr/lib/docker/ in SONiC filesystem.
- How to verify it
Install SONiC image on the switch, mount squashfs to some directory, mount overlay rw layer over squashfs, mount procfs and sysfs, mount docker library. Start the docker using:
root@sonic:~$ /usr/lib/docker/docker.sh start
Signed-off-by: Stepan Blyshchak <stepanb@nvidia.com>
Use udevadm to trigger the udev rules on the first boot
How to verify:
- Connect C0 with E1031;
- Install or upgrade the sonic os to 202012 branch;
- When access to sonic check if /dev/C0-1 to /dev/C0-48 are existed.
- Why I did it
To pick up new features and fix from SDK/FW and SAI
SDK/FW new Feature:
All | Added support for multiple modules and cable types. For full list contact Nvidia networking support
Spectrum-3 | SN46000C | Added support for up to 5W on ports 49 to 64 .
SDK/FW bugs' fix:
All | fast reboot | fast boot failure from latest 201811 to 201911 and above
Spectrum | 10GbE/1GbE Transceiver (FTLX8574D3BCV) stopped working after firmware upgrade
Spectrum-2 | When device is rebooted with locked Optical Transceivers in split mode, the firmware may get stuck
Spectrum-2 | SN3700 | When connecting at 200GbE to Ixia K400, Ixia receives CRC errors
Spectrum-2 | SN3800 | On rare occasions packets loss may be experienced due to signal integrity issues
Spectrum-2 | When the port is a member of a LAG, after a warmboot and port toggle on the peer-side, the port remains down
Spectrum-3 | SN4700 | While using Optic cable in Split 4x1 mode in PAM4, when two first ports are toggled, the other 2 ports go down
Spectrum-3 | SN4700 | When working in 400GbE, deleting the headroom configuration (changing buffer size to zero) on the fly may cause continual packet drops
SAI
All | sFlow | Use hardcoded value 1 as netlink group number ax expected by hsflowd
- How I did it
Update the related version number in the make files and update the submodule pointer accordingly.
- How to verify it
Run regression test and everything works good.
Features may be enabled/disabled for the same topology based on run-time
configuration. This PR adds the ability to enable/disable feature based
on config db data.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
Parse the value `AutoNegotiation` element from the `LinkMetadata` section of minigraph file. If the element is present, an `autoneg` key will be added to the port in the `PORT` table of Config DB with a value of either `off` or `on`
If an `autoneg` value is present in port_config.ini, the value from the minigraph will take precedence, overriding that value.
Also remove `AutoNegotiation` and `EnableAutoNegotiation` elements from the `DeviceInfo` section, as we will use this data in the `LinkMetadata` section to determine whether to enable auto-negotiation for a port.
#### Why I did it
- Python3 compatibility changes for PDDF eeprom class
- Adding API for temperature in PDDF psu class
- PEP8 standard changes and adding missing method in PDDF sfp class
#### How I did it
- Using python3 to invoke the sonic_platform module in PDDF based platform
- Running autopep8 tool to comply to PEP8 standards
#### Why I did it
Recently, CLI sfputil replace the old sonic platform utils with sonic platform API. However, sonic platform API does not support SFP low power mode and reset related operation. The PR is to fix it.
The change to replace platform utils with sonic platform API was reverted on 202012, once this PR is merged, we can cherry-pick these two PRs to 202012 together.
#### How I did it
In low power mode and reset related operation, use "docker exec" if the command is running on host side.
