*Removed execute permissions from the systemd copp-config.service file.
Without this we will get a warning: "Configuration file /lib/systemd/system/copp-config.service is marked executable. Please remove executable permission bits. Proceeding anyway."
To Fix#8697 . The config load_minigraph initializes 'admin_status' to up when platform.json has DPB configs. This doesn't happen when using port_config.ini
The update minigraph has logic to initialize only the ports whose neighbors are defined or those belonging to portchannel
However, a change was introduced to have default admin status to be 'up' in portconfig.py when the minigraph was using platform.json
This will lead to sanity check failure in sonic-mgmt and thus no test cases could be run
Why I did it
fstrim has dependency on pmon docker.
How I did it
start fstrim timer after sonic.target.
How to verify it
local test and PR test.
Signed-off-by: Ying Xie ying.xie@microsoft.com
- Why I did it
Removed 2x40G for SN3800. This mode is not supported by hardware.
- How I did it
Removing it from hwsku.json and platform.json
- How to verify it
Load it in the device and check supported modes
* [Nokia ixs7215] Miscellaneous platform API fixes
This commit delivers the following fixes for the Nokia ixs7215 platform
- Fix bug in a fan API error path
- Add support for setting the fan drawer led
- Add support for getting/setting the front panel PSU status led
- Add support for getting the min/max observed temperature value
* [Nokia ixs7215] code review changes: temperature min/max values
Fix#8722
retreat two commits which cause warm reboot regression
* eb79ca4 2021-09-01 | [pbh]: Add PBH OA (#1782) [Nazarii Hnydyn]
* 3d6b1f0 2021-08-31 | [buffer orch] Bugfix: Don't query counter SAI_BUFFER_POOL_STAT_XOFF_ROOM_WATERMARK_BYTES on a pool where it is not supported (#1857) [Stephen Sun]
Signed-off-by: Guohan Lu <lguohan@gmail.com>
- Why I did it
Advance to Mellanox SAI ver 1.19.2 to pick up dynamic Policy Based Hashing support.
For this version above the static Policy Based Hashing is no longer supported.
For detailed release notes check https://github.com/Mellanox/SAI-Implementation/blob/sonic2111/release%20notes.txt
- How I did it
Updated SAI-Implementation submodule
- How to verify it
1. make configure PLATFORM=mellanox
2. make target/sonic-mellanox.bin
Run full regression as well as new dynamic PBH tests
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
Why I did it
Fix an issue on the Clearwater2 linecard.
When the linecard is started with a fresh image without configuration, phys would not be initialized.
How I did it
Added default_sku for Clearwater2 which prevents config-setup from failing to create a default config_db.json.
Added some extra logic in the phy-credo-init script to run the phy_config.sh of the hwsku pointed by default_sku if the DEVICE_METADATA.localhost.hwsku information is not populated in CONFIG_DB.
How to verify it
Booting an image with this change and without configuration will lead to the phys being initialized using the phy_config.sh from default_sku.
What I did it
Add new platform x86_64-ragile_ra-b6910-64c-r0 (Tomahawk 3)
ASIC Vendor: Broadcom
Switch ASIC: Tomahawk 3
Port Config: 64x100G
-How I did it
Provide device and platform related files.
-How to verify it
show platform fan
show platform ssdhealth
show platform psustatus
show platform summary
show platform syseeprom
show platform temperature
show interface status
To include sonic_installer swap setup changes
171eb4f [sonic_installer] Add swap setup support (#1787)
6483b0b QOS fieldvalue refernce ABNF format to string (#1626)
8d16eb5 [Fast-reboot] Set flex counters delay indicator to prevent flex counters enablement after fast-reboot (#1768)
1bc24ca [portstat pfcstat] Unify the packet number format in the output of portstat and pfcstat in all cases (#1755)
d7900dd [config][generic-update] Implementing patch sorting (2nd attempt) (#1794)
7ed9a91 [show] Allow system with no ports in config db run without errors (#1754)
Signed-off-by: Longxiang Lyu <lolv@microsoft.com>
Why I did it
Power cycle test case fails for Z9332f in sonic-mgmt framework(#8605).
How I did it
Modified the platform API to return expected strings.
How to verify it
Power cycle the device and verify the reboot reason.
Run sonic-mgmt test_reboot script.
Catch up on fixes from BRCM SUG repo to pick up fixes after 5.0.0.6 all the way up to 5.0.0.8
Fixes include the following:
```
CS00012201827: Warmreboot causes syncd crash with SAI_API_UNSPECIFIED:syncdb_data_file_read:2230 Failed to parse JSON: error -2
DNX: Fix for ACL table create with v6 next hdr attr
and many unspecified changes that also went into 5.0.0.8
```
#### How to verify it
Preliminary tests looks fine on both XGS (gechiang) and DNX (judyjoseph)
On XGS testing done as following:
BGP neighbors were all up with proper routes programmed
interfaces are all up
Manually ran the following test cases on 7260CX3 T0 DUT and all passed:
```
ipfwd/test_dir_bcast.py
fdb/test_fdb.py
fib/test_fib.py
vlan/test_valn.py
```
Also validated for for CS00012201827 (https://github.com/Azure/sonic-buildimage/issues/8300)
Includes commits
```
d7900dd 2021-09-01 | [config][generic-update] Implementing patch sorting (2nd attempt) (#1794) [Mohamed Ghoneim]
7ed9a91 2021-09-01 | [show] Allow system with no ports in config db run without errors (#1754) [Lior Avramov]
```
- Why I did it
SN4600 A0 platform was EOL, so there is no need to support it, sensor conf can be removed and we don't need to maintain 2 sensor conf files, only A1 platform is needed.
- How I did it
Remove get_sensors_conf_path which intends to load correct sensor conf for different(A0/A1) platforms.
Remove the sensor conf for A0 platform, rename previous sensor.conf.a1 to sensor.conf
- How to verify it
Run sensor test on the SN4600 platform.
Commits on Aug 17, 2021
[VS Test] Skip flaky tests (#1875) f501e1c
Skipping another flaky test temporarily (#1878) 15a014b
Commits on Aug 18, 2021
Change rif_rates.lua and port_rates.lua scripts to calculate rates co… ed867b1
Commits on Aug 20, 2021
[ACL] Match TCP protocol while matching TCP_FLAG (#1854) 756471a
Commits on Aug 23, 2021
[macsecmgrd] MACsec XPN changes (#1821) 4bf3d61
Commits on Aug 24, 2021
[ci]: fix artifacts download from swss-common and sairedis (#1882) 12f0ee7
Commits on Aug 26, 2021
[gearbox] Set port speed to SAI_PORT_ATTR_SPEED for gearbox (#1785) fc6cd81
[fpmsyncd][MPLS] updates for MPLS plus AZP libnl3 install (#1871) 76e3406
Commits on Aug 27, 2021
Fix vs test failure in test_buffer_traditional (#1881) db9ca83
Commits on Aug 31, 2021
[buffer orch] Bugfix: Don't query counter SAI_BUFFER_POOL_STAT_XOFF_R… 3d6b1f0
Commits on Sep 01, 2021
[pbh]: Add PBH OA (#1782) eb79ca4
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
To enable saiserver docker on different platforms, it needs different configuration files. make the saiserver docker mount them in hwsku folder.
Co-authored-by: Ubuntu <richardyu@richardyu-ubuntu-vm0.trsxrdzozv2e1czsze2t05vqzh.ix.internal.cloudapp.net>
#### Why I did it
Reset flex counters delay flag on config DB when enable_counters script is called to allow enablement of flex counters in orchagent.
#### How I did it
Push to config DB 'false' value for delay indication when enable_counters script is called before enabling the counters.
#### How to verify it
Observe counters are created when enable_counters script is called.
Commits on Aug 25, 2021
[show][config] cli refactor for muxcable with abstract class implemen… 37039f5
[voq][chassis] VOQ cli show commands implementation (#1689) 7ebb2f7
[PBH] CLI for Policy Based Hashing (#1701) 6fd0675
Commits on Aug 26, 2021
[config reload] Call systemctl reset-failed for snmp,telemetry,mgmt-f… f5ce87a
Commits on Aug 27, 2021
Fix logic in RIF counters print (#1732) 83309c6
Commits on Aug 30, 2021
[ecnconfig] Fix exception seen during display and add unit tests (#1784) 3e8626e
Commits on Aug 31, 2021
[debug dump util] Module implementation Logic and Port Module (#1667) 720b650
Why I did it
Pre-requisite: #8269
To be able to generate multi-asic KVM image.
To provide flexibility to generate single asic or both single and multi-asic images.
How I did it
Add a new build param, BUILD_MULTIASIC_KVM, if set to "y", the multi-asic VS target KVM images will be generated. If not, only single asic VS image will be generated.
Make changes to build_image.sh to generate 4-asic and 6-asic KVM images if BUILD_MULTIASIC_KVM parameter is set to y
How to verify it
Generate single-asic VS as currently done, no change in build steps:
make configure PLATFORM=vs
make target/sonic-vs.img.gz - will generate only single asic KVM image.
make BUILD_MULTIASIC_KVM=y target/sonic-vs.img.gz - will generate single asic and multi-asic KVM images.
should generate:
sonic-vs.bin
sonic-vs.img.gz
sonic-4asic-vs.img.gz
sonic-6asic-vs.img.gz
#### Why I did it
Fixing issue [[sonic-utilities] Unit test failed when building sonic-utilities #1761](https://github.com/Azure/sonic-utilities/issues/1761)
Importing `sonic-acl` caused getting references by `backlinks()` to break,
#### How I did it
solution is to comment out the importing statement as it is not used anyway.
#### How to verify it
Ran sonic-utilities unit-tests locally after the fix, and all passed.
#### Why I did it
To bump thrift version to 0.13.0, to fix some dependencies issues.
#### How I did it
As there are dependencies between thrift and saithrinft server (bf3630316c/test/saithrift) which is used by syncd-rpc to update thrift version, I also need to make changes in saithrinft server, and then SAI ref point should be updated in sairedis, and then sairedis ref point should be updated too. It is too many change, so I decided to add thrift 0.13.0 as separeate target to be able to work and test father changes in saithrinft and one when appropriate changes will be merged to SAI and ref points will be updated I will squash this and the old thrift target. I was not able to build thrift deb pkg by original rules, so I copied `debian `folder from the old version and tune it for newer one.
#### How to verify it
```
make init
make configure PLATFORM=vs
make target/debs/buster/libthrift_0.13.0_amd64.deb
```
```
- Disable health monitoring of `psu.voltage` until support is implemented
- chassis: disable provisioning bit once linecard has booted
- chassis: fix issue in `show version` when running as `admin`
- chassis: fix race when reading an eeprom before it's available
- chassis: implement `get_all_asics` call
- api: fix `ChassisBase.get_system_eeprom_info` implementation
- api: add missing thermal condition and info
- api: fix return value of `ChassisBase.set_status_led`
- sfp: introduce SfpOptoeBase implementation used based on configuration knob
- psu: rely on pmbus to read input/output status when other mechanism is missing
- misc: other refactors and improvements
Why I did it
End goal: To have azure pipeline job to run multi-asic VS tests.
Intermediate goal: Require multi-asic KVM image so that the test can be run.
The difference between single asic and multi-asic KVM image is asic.conf file which has different NUM_ASIC values.
Idea behind the approach in this PR to attain the intermediate goal above:
Ease of building multi-asic KVM image so that any user or azure pipeline can use a simple make command to generate single or multi-asic KVM images as required.
Use a single onie installer image and multiple KVM images for single and multi-asic images.
Current scenario:
For VS platform, sonic-vs.bin is generated which is the onie installer image and sonic-vs.img.gz is generated which is the KVM iamge.
Scenario to be achieved:
sonic-vs.bin - which will include single asic platform, 4 asic platform and 6 asic platform.
sonic-vs.img.gz - single asic KVM image
sonic-4asic-vs.img.gz - 4 asic KVM image
sonic-6asic-vs.img.gz - 6 asic KVM image
In this PR, 2 new platforms are added for 4-asic and 6-asic VS.
How I did it
Create 4-asic and 6-asic device directories with the required files and hwsku files.
Add onie-recovery image information in vs platform.
How to verify it
After this PR change, no build change.
sonic-vs.bin onie installer image should include information of new multi-asic vs platforms.
Why I did it
The first 4 ports on this dut are breakout ports. They might not always be connected in lab. Mark them as 'RJ45' to skip the SFP check since they are by default disabled.
How to verify it
run platform test_reboot.py
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
Why I did it
To monitor the SSD health condition in DellEMC S6100 platform post upgrade.
A daemon is introduced to monitor the SSD every one hour.
To check for SSD status at boot time and at the time of cold-reboot.
All these changes are supported only for newer SSD firmware.
Porting changes from 201911 branch
Added a platform_reboot_pre_check script to prevent cold-reboot based on SSD status.
Depends on Azure/sonic-utilities#1556
DO NOT MERGE UNTIL ABOVE PR IS MERGED
This PR updates the following commits in sonic-platform-daemons
e038bc2 [xcvrd] initial support for integrating vendor specfic class objects for calling Y-Cable API's inside xcvrd (#197)
57e3d78 Fix issue#8230 (#210)
f63fc94 [thermalctld] Use interval set in thermal policy if available (#164)
8b2227d [CI] Sum up Azp unit test code coverage (#209)
b880c48 [xrcvd]: Added unit test for sfp oir events (#205)
4a32b5a [y-cable] fix for logging the xcvrd metrics before writing the state to the State-DB (#208)
53e1532 (origin/shilong-test) Add str conversion for numeric xcvr info fields to xcvrd (#200)
03a4add Introduce mgmtinit delay after transceiver module insertion (#201)
This PR updates the following commits in sonic-platform-common
0dc71c1 Add y-cable driver for simulated mux (#213)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
The Lodoga platform also matched crow which was hardcoding the flash
size to 3700. This change enables autodetect on Clearlake which in turns
allows autodetect for Lodoga.
The threshold was bumped from 3700 to 4000 because size computation can
differ slightly and report slightly above 3700.
Lodoga actually has a 8GB storage device.
LodogaSsd variant has a 30GB SSD drive.
However, in boot0 both were mishandled and assigned 4GB for legacy reasons.
Remove the hardcoding of the flash size and let boot0 autodetect the available space.
This commit adds support for changing the default console baud rate configured
within the U-Boot bootloader. That default baud rate is exposed via the value
of the U-Boot 'baudrate' environment variable. This commit removes logic that
hardcoded the console baud rate to 115200 and instead ensures that the U-Boot
'baudrate' variable is always used when constructing the Linux kernel boot
arguments used when booting Sonic.
A change is also made to rc.local to ensure that the specified baud rate is set
correctly in the serial getty service.
#### Why I did it
New PSU could install different type of fan, so fan max/min speed should be read per PSU
#### How I did it
The existing implementation read PSU max/min fan speed from a common file, change it to read from per PSU file
#### How to verify it
Manual test
