Why I did it
There is a bug that the Port attributes in CONFIG_DB will be cleared if using sudo config macsec port add Ethernet0 or sudo config macsec port del Ethernet0
How I did it
To fetch the port attributes before set/remove MACsec field in port table.
Signed-off-by: Ze Gan <ganze718@gmail.com>
Why I did it
To further add cable_type and soc_ipv4 field to table MUX_CABLE, this PR tries to parse the minigraph like the following:
```
<Device i:type="SmartCable">
<ElementType>SmartCable</ElementType>
<SubType>active-active</SubType>
<Address xmlns:d5p1="Microsoft.Search.Autopilot.NetMux">
<d5p1:IPPrefix>192.168.0.3/21</d5p1:IPPrefix>
</Address>
<AddressV6 xmlns:d5p1="Microsoft.Search.Autopilot.NetMux">
<d5p1:IPPrefix>::/0</d5p1:IPPrefix>
</AddressV6>
<ManagementAddress xmlns:d5p1="Microsoft.Search.Autopilot.NetMux">
<d5p1:IPPrefix>0.0.0.0/0</d5p1:IPPrefix>
</ManagementAddress>
<ManagementAddressV6 xmlns:d5p1="Microsoft.Search.Autopilot.NetMux">
<d5p1:IPPrefix>::/0</d5p1:IPPrefix>
</ManagementAddressV6>
<SerialNumber i:nil="true" />
<Hostname>svcstr-7050-acs-1-Servers0-SC</Hostname>
</Device>
<Device i:type="Server">
<ElementType>Server</ElementType>
<Address xmlns:d5p1="Microsoft.Search.Autopilot.NetMux">
<d5p1:IPPrefix>192.168.0.2/21</d5p1:IPPrefix>
</Address>
<AddressV6 xmlns:d5p1="Microsoft.Search.Autopilot.NetMux">
<d5p1:IPPrefix>fc02:1000::2/64</d5p1:IPPrefix>
</AddressV6>
<ManagementAddress xmlns:d5p1="Microsoft.Search.Autopilot.NetMux">
<d5p1:IPPrefix>0.0.0.0/0</d5p1:IPPrefix>
</ManagementAddress>
<Hostname>Servers0</Hostname>
</Device>
```
Signed-off-by: Longxiang Lyu lolv@microsoft.com
How I did it
get_mux_cable_entries will try to get the mux cable device from the devices list and get the cable type and soc ip address from the device definition.
How to verify it
Pass the unit-test
Why I did it
add celestica belgite platform
How I did it
add belgite platform in celestica
Co-authored-by: nicwu-cel <nicwu@celestica.com>
Co-authored-by: anjian <anjian@celestica.com>
Co-authored-by: sandycelestica <sandyli@celestica.com>
This update has following changes
Refactor pci topology logic for chassis (fixes some chassis commands and chassisd on linecard)
Introduce new cooling algorithm
Fix linecard poweroff logic when supervisor is going down
Fix linecard status led leading to system-health crashing
Misc fixes
Why I did it
At present, there is no mechanism in an event driven model to know that the system is up with all the essential sonic services and also, all the docker apps are ready along with port ready status to start the network traffic. With the asynchronous architecture of SONiC, we will not be able to verify if the config has been applied all the way down to the HW. But we can get the closest up status of each app and arrive at the system readiness.
How I did it
A new python based system monitor tool is introduced under system-health framework to monitor all the essential system host services including docker wrapper services on an event based model and declare the system is ready. This framework gives provision for docker apps to notify its closest up status. CLIs are provided to fetch the current system status and also service running status and its app ready status along with failure reason if any.
How to verify it
"show system-health sysready-status" click CLI
Syslogs for system ready
Why I did it
It is not necessary to trigger the publish pipeline when build is failed.
How I did it
Remove the condition in the azp task, change to use template condition.
What I did:
Added support to create route-map action set tag <user define value>
when the the allow prefix list matches. The tag can ben define by user in
constants.yml.
Why I did:
Since for Allow List feature we call from base route-map allow-list route-map having set tag option provides way for base route-map to do match tag and take any further action if needed. Adding tag provide metadata that can used by base route-map
- Why I did it
Script fails when there is an exception while reading
- How I did it
Add more logs and checks. Fix wrong variable naming and messages.
- How to verify it
Provoke exception while read_eeprom() and check that it is handled properly
Why I did it
https://github.com/Azure/SONiC/blob/master/doc/vxlan/Overlay%20ECMP%20with%20BFD.md
From the design, need to advertise the route with community string, the PR is to implement this.
How I did it
To use the route-map as the profile for the community string, all advertised routes can be associated with one route-map.
Add one file, mangers_rm.py, which is to add/update/del the route-map. Modified the managers_advertise_rt.py file to associate profile with IP route.
The route-map usage is very flexible, by this PR, we only support one fixed usage to add community string for route to simplify this design.
How to verify it
Implement new unit tests for mangers_rm.py and updated unit test for managers_advertise_rt.py.
Manually verified the test case in the test plan section, will add testcase in sonic-mgmt later. Azure/sonic-mgmt#5581
Why I did it
Config db schema generated by minigraph should run yang validation.
How I did it
Modify run_script to add yang validation.
How to verify it
Run sonic-config-engine unit test.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Support to trigger a pipeline to download and publish artifacts to storage and container registry.
Support to specify the patterns which docker images to upload.
How I did it
Pass the pipeline information and the artifact information by pipeline parameters to the pipeline which will be triggered a new build. It is to decouple the artifacts generation and the publish logic, how and where the artifacts/docker images will be published, depends on the triggered pipeline.
How to verify it
This is part of HLD Azure/SONiC#925
#### Why I did it
Add link-training support
#### How I did it
Update SONiC YANG for port link-training support
#### Description for the changelog
Add "link_training" to sonic-port.yang
#### Link to config_db schema for YANG module changes
https://github.com/sonic-net/SONiC/wiki/Configuration#port
Why I did it
Previous subport unit tests uses port channel names like PortChannel01, so for subport name generated PortChannel01.10, it exceeds Linux network interface name 15 char limit.
Signed-off-by: Longxiang Lyu lolv@microsoft.com
How I did it
Modify PortChannel01 to PortChannel1.
- Why I did it
Platform_reboot files for simx doesn't do aything different apart from calling /sbin/reboot. which is anyway done in the /usr/local/bin/reboot script i.e. the parent script which calls the platform specific reboot scripts if present.
Moreover, /sbin/reboot invoked in the platform specific reboot script is a non-blocking call and thus it returns back to the original script (although /sbin/reboot does it job in the background) and we see messages like this.
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
Why I did it
Fixes#10793
How I did it
Removed the switch_type validation from the Yang model.
How to verify it
compile sonic_yang_mgmt-1.0-py3-none-any.whl and sonic_yang_mgmt-1.0-py3-none-any.whl
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
Why I did it
To include ONIE version in show platform firmware status command output in DellEMC S6100 and Z9332f platforms.
How I did it
Include ‘ONIE’ in the list of components provided by platform APIs in DellEMC S6100 and Z9332f.
Unmount ONIE-BOOT if mounted using fast/soft/warm-reboot plugins in DellEMC S6100.
Why I did it
To upgrade SSD firmware in initramfs while rebooting from SONiC to SONiC and during NOS to SONiC migration.
How I did it
New option 'ssd-upgrader-part’ is introduced in grub command line, to indicate the partition and its filesystem type in which the SSD firmware updater is present. ‘ssd-upgrader-part’ syntax is ssd-upgrader-part=<partition>,<filesystem type>. Example: ssd-upgrader-part=/dev/sda8,ext4
A new initramfs script ‘ssd-upgrade’ is included in init-premount and it invokes the SSD firmware updater (ssd-fw-upgrade) present in the partition indicated by the boot option 'ssd-upgrader-part'
How to verify it
In SONiC, the SSD firmware updater is copied to “/host/” directory.
Fast-reboot is to be initiated with the ‘-u’ option ([scripts/fast-reboot] Add option to include ssd-upgrader-part boot option with SONiC partition sonic-utilities#2150)
After reboot, while booting into SONiC the SSD firmware updater will be executed in initramfs.
288c2d8 Revert "[scripts/fast-reboot] Shutdown remaining containers through systemd (#2133)" (#2161)
bce4694 [autoneg] add support for remote speed advertisement (#2124)
a73f156 [show][vrf]Fixing show vrf to include vlan subinterface (#2158)
7a06457 [auto_ts] Enable register/de-register auto_ts config for APP Extension (#2139)
083ebcc Add transceiver-info items advertised for cmis-supported moddules (#2135)
0811214 Validate destination port is not LAG (#2053)
6ab1c51 [minigraph] Consume golden_config_db.json while loading minigraph (#2140)
c37a957 [Kdump] Remove the duplicate logic if Kdump was disabled (#2128)
1143869 Ordering fix for sfpshow eeprom (#2113)
fdb79b8 Allow fw update for other boot type against on the previous "none" boot fw update (#2040)
a54a091 [GCU] Supressing YANG errors from libyang while sorting (#1991)
fbfa8bc [GCU] Enabling AddRack and adding RemoveRack tests (#2143)
d012be9 [Command-Reference] Add CLI docs for route flow counter (#2069)
8c07d59 [Mellanox] [reboot] [asan] stop asan-enabled containers on reboot (#2107)
697aae3 Fix speed parsing when speed is NOT fetched from APPL_DB (#2138)
22a388b [show] fix get routing stack routine (#2137)
cb3a047 Support option --ports of config qos reload for reloading ports' QoS and buffer configuration to default (#2125)
154a801 Enhance "config interface type/advertised-type" to be blocked on RJ45 ports (#2112)
3732ac5 Add CLI for route flow counter feature (#2031)
29771e7 [techsupport] improve robustness (#2117)
f9dc681 [intfutil] Display RJ45 port and portchannel speed in 'M' instead of 'G' when it's <= 1000M (#2110)
781ae9f [config] Do not enable pfcwd for BmcMgmtToRRouter (#2136)
23e9398 [scripts/fast-reboot] Shutdown remaining containers through systemd (#2133)
576c9ef [scripts/fast-reboot] stop timers in advance (#2131)
4dad79c bugfix: incorrect command for portchannel creation (#2134)
c17b1f4 [show][muxcable] Decrease the timeout for show mux status/hwmode (#2130)
49d61f8 [scripts/fast-reboot] cleanup (#2132)
52ca324 [config/config_mgmt.py]: Fix dpb issue with upper case mac in (#2066)
9e2fbf4 Update db_migrator to support `pfcwd_sw_enable` (#2087)
4010bd0 FGNHG CLI changes (#1588)
6bd54d0 Fix 'show mac' output when FDB entry for default vlan is None instead of 1 (#2126)
Fixes#9279
- Why I did it
Part of larger effort to move all SONiC systems to bullseye
- How I did it
1. Update container makefiles with correct dependencies
2. Update container Dockerfile with correct base image
3. Update container Dockerfile with correct apt dependencies
4. Update any other makefiles with dependencies to remove python2 support
5. Minor changes to support bullseye / python3
- How to verify it
Run regression on the switch:
1. Verify PTF community tests work
2. Verify syncd runs and all ports come up / pass traffic
3. Verify all platform tests succeed
In Makefile.cache, for $(1)_DEP_PKGS_SHA, the intention is to include
the DEP_MOD_SHA and MOD_HASH of each of the current package's
dependencies. However, there's a level of dereferencing missing; instead
of grabbing the value of $(dfile)_DEP_MOD_SHA, it is literally using the
variable name $(dfile)_DEP_MOD_SHA. This means that the value of this
variable will not change when some dependency changes.
The impact of this is in transitive dependencies. For a specific
example, if there is some change in sairedis, then sairedis will be
rebuilt (because there's a change within that component), and swss will
be rebuilt (because it's a direct dependency), but
docker-swss-layer-buster will not get rebuilt, because only the direct
dependencies are effectively being checked, and those aren't changing.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
Fixes some pmon errors/warnings by providing missing configuration files
How I did it
Add missing pcie.yaml and sensors.conf for supported linecards
How to verify it
pcie-check should pass
sensors should display proper sensor names
* [PDDF] Rename temp for 7816/7326/7726
Signed-off-by: Jostar Yang <jostar_yang@accton.com.tw>
* Change naming to pddf device
Co-authored-by: Jostar Yang <jostar_yang@accton.com.tw>
Why I did it
The image size is too large, when there are multiple lazy packages and multiple platforms. It is not necessary to keep the lazy installation packages in multiple copies.
For cisco image, the image size will reduce from 3.5G to 1.7G.
How I did it
Use symbol links to only keep one package for each of the lazy package.
Make a new folder fsroot/platform/common
Copy the lazy packages into the folder.
When using a package in each of the platform, such as x86_64-grub, x86_64-8800_rp-r0, x86_64-8201_on-r0, etc, only make a symbol link to the package in the common folder.
Signed-off-by: Ze Gan <ganze718@gmail.com>
#### Why I did it
The SSCI is wrong in the output of MACsec so that the virtual SAI cannot parse the output corretly.
The wrong output:
```
142: macsec_eth1: protect on validate strict sc off sa off encrypt on send_sci on end_station off scb off replay off
cipher suite: GCM-AES-XPN-256, using ICV length 16
TXSC: 5254008f4f1c0001 on SA 0
0: PN 103, state on, key 12cbc4b64e26c9a1ba14d810da20d16e
SSCI 33554432, RXSC: 525400edac5b0001, state on
0: PN 107, state on, key 12cbc4b64e26c9a1ba14d810da20d16e
offload: off
```
Expected
```
142: macsec_eth1: protect on validate strict sc off sa off encrypt on send_sci on end_station off scb off replay off
cipher suite: GCM-AES-XPN-256, using ICV length 16
TXSC: 5254008f4f1c0001 on SA 0
0: PN 252, state on, SSCI 33554432, key 12cbc4b64e26c9a1ba14d810da20d16e
RXSC: 525400edac5b0001, state on
0: PN 264, state on, key 12cbc4b64e26c9a1ba14d810da20d16e
```
#### How I did it
Move SSCI before the key so that SSCI will not be the front of SC information.
#### Why I did it
To pick up new commits:
* 60d2467 Add depends to p4rt debian package
#### How I did it
update sonic-p4rt/sonic-pins submodule pointer
#### How to verify it
should be able to build with p4rt enabled.
#### Why I did it
This function is critical for is_multi_asic() and SonicDBConfig initializing. No explicit reading ConfigDB. Otherwise it will implicitly trigger SonicDBConfig initializing.
#### How I did it
1. No explicit reading ConfigDB in get_asic_conf_file_path()
2. Collect asic_conf_path_candidates lazily to prevent any unnecessary side effect and improve the performance
