Why I did it
Release notes for Cisco 8102-64H-O, 8101-32FH-O, and 8111-32EH-O
• Fix to address Netscan packet drop issue
• Fix for show platform npu router route-table CLI
• Addressed testcase errors for test_drop_counter syslog
• Addressed testcase failures for test_thermal.TestThermalApi for 8111
• Double commit of fix for ECC errors for 202305
How I did it
Update platform version to 202305.1.0.9
Why I did it
Disable Bad Link Detection feature in SDK
Fix to address pmbus driver errors causing “show platform psu status” not showing power
Work item tracking
How I did it
How to verify it
Why I did it
Release notes for Cisco 8111-32EH-O, 8102-64H-O and 8101-32FH-O:
• Fixed a bug in PFC-WD where watchdog is triggered too often when sparse traffic is present, failing to detect the traffic traversal - (SR 696617830)
• Resolved an issue where SAI_STATUS_ITEM_NOT_FOUND error was seen while adding LAG members - (MIGSMSFT-354)
• Fixed Thermal API related error message (MIGSMSFT-354)
• Fixed an issue related to default config trap - (MIGSMSFT-354)
• Changed the message log level from error to debug in situations when the HW offloaded session is not found or was never created for the packet received. (MIGSMSFT-354)
• Fixed an issue where drop option was not working when encap and decap IPinIP tunnels share the same SDK tunnel port.
• Fixed an error while running VRF testcase (MIGSMSFT-354)
• Fixed an issue where BFD packets not egressing using Queue 7
• SAI support for additional FEC related attributes:
· SAI_PORT_ATTR_MAX_FEC_SYMBOL_ERRORS_DETECTABLE
· SAI_PORT_STAT_IF_IN_FEC_CODEWORD_ERRORS_S0
. SAI_PORT_STAT_IF_IN_FEC_CODEWORD_ERRORS_S16
Work item tracking
Microsoft ADO (number only):
Why I did it
FCS/CRC Errors will only be reported as RX_ERR.
Fix to avoid the mac port related errors.
Fix for sharedResSize testcase failure in QoS-SAI
Fix the issue related to voltage in 'show platform psustatus'.
Support WRED drop for lossy queues.
Fixed an issue where lossy traffic was getting dropped.
Enhancement of SAI logging for errors and interrupts
Work item tracking
Microsoft ADO (number only):
How I did it
Update Cisco platform to 202305.1.0.3
How to verify it
Why I did it
Release Notes for Cisco 8111-32EH-O and 8102-64H
Fix for "Failed to get port by bridge port ID" error (MIGSMSFT-354)
Added CLI to enable trap events (MIGSMSFT-166)
Support to add critical message upon replace device SAI notification
Added support for input voltage/current/power info for PSUs
Added support for sff_mgr for deterministic bringup of SFF compliant modules
IOFPGA fix to support optics port in low power mode on 8101-32FH-O
Enable CMIS Manager for 8111-32EH-O
Added dump option to “show plat npu mac-state” CLI to dump MAC state info
Added media-based NPU serdes attributes for Credo 800G AEC Y-cables from media_settings.json
Auto FPD support for power CPLD on 8101 and 8111 platforms
Caveats:
Validation on 8101-32FH-O still pending. Will update release notes once completed.
Below 8800 platform specific fixes included but 8800 support not claimed in this code drop
Interop fix for BFD and Fair VOQ
Fix to update voq cgm profile during port speed change event
Create ECN profiles based on port speeds dynamically
Work item tracking
Microsoft ADO (number only):
How I did it
How to verify it
Why I did it
Drop for 8111-32EH-O:
Fix for clear_trap_configuration errors
Fix OREDERED ECMP NHG drop when route is added before members are added
Fix port handling of empty ecmp group to drop packets
Fix for link_notification_handle error
Auto FPD upgrade support
Work item tracking
Microsoft ADO (number only):
How I did it
update platform to 202305.1.0.1
Why I did it
First SONIC 202305 based release
Includes all fixes so far up to latest 202205 based 8111 drop (Code drop 111: 202205.main.0.13)
Work item tracking
Microsoft ADO (number only):
How I did it
update to 202305.main.0.1 release
How to verify it
Why I did it
Update Makefile, so it does the following:
For a given platform, verify if platform/checkout/.ini exists and hence run the platform/checkout/template.j2. This allows platform code to be checked out during the 'make configure' stage.
How I did it
git clone git@github.com:Azure/sonic-buildimage.git
mkdir platform/cisco-8000
make init
make configure PLATFORM=cisco-8000
make all
