* [baseimage]: Update openssh to 1:8.4p1-5+deb11u2 (#16826)
Openssh in Debian Bullseye has been updated to 1:8.4p1-5+deb11u2 to fix CVE-2023-38408.
Since we're building openssh with some patches, we need to update our version as well.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Remove main deb installation for derived deb build (#16859)
* Don't install dependencies of derived debs
When "building" a derived deb package, don't install the dependencies of
the package into the container. It's not needed at this stage.
* Re-add openssh-client and openssh-sftp-server as derived debs
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
---------
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Re-add missing dependency for derived debs. (#16896)
* Re-add missing dependency for derived debs.
My previous changed removed the whole dependency on the main deb
existing, not just the installation of the main deb. Fix this by
readding a dependency on the main deb being built/pulled from cache.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Add the kernel and initramfs as dependencies for RFS build
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
---------
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
---------
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Add pre start check to ensure intfmgrd is running.
The check will run for 20 seconds at most.
Signed-off-by: Longxiang Lyu <lolv@microsoft.com>
Co-authored-by: Longxiang Lyu <35479537+lolyu@users.noreply.github.com>
* [buffers] Add create_only_config_db_buffers.json for MLNX devices (not MSFT SKU), inject it at the start of the swss docker
Signed-off-by: vadymhlushko-mlnx <vadymh@nvidia.com>
* [buffers] Align the sonic-device_metadata.yang
Signed-off-by: vadymhlushko-mlnx <vadymh@nvidia.com>
---------
Signed-off-by: vadymhlushko-mlnx <vadymh@nvidia.com>
What I did:
Fixes: #16468
Why I did:
On Some chassis there is no dedicated eth1-midplane interface on supervisor for supervisor and LC communication but instead Linux bridge br1 is used for that. Because of this changes that were done to white-list traffic over eth1-midplane would not work.
How I did:
To fix this we are using altname property of ip link command to set eth1-midplane as altname of br interface. This is done to keep design generic across chassis and between supervisor and LC also. IP-table rules are updated to get parent/base interface name of eth1-midplane.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
#### Why I did it
To enable qos config for a certain backend deployment mode, for resource-type "Compute-AI".
This deployment has the following requirement:
- Config below enabled if DEVICE_TYPE as one of backend_device_types
- Config below enabled if ResourceType is 'Compute-AI'
- 2 lossless TCs' (2, 3)
- 2 lossy TCs' (0,1)
- DSCP to TC map uses 4 DSCP code points and maps to the TCs' as follows:
"DSCP_TO_TC_MAP": {
"AZURE": {
"48" : "0",
"46" : "1",
"3" : "3",
"4" : "4"
}
}
- WRED profile has green {min/max/mark%} as {2M/10M/5%}
This required template change <as in the PR> in addition to the vendor qos.json.j2 file (not included here).
### How I did it
#### How to verify it
- with the above change and the vendor config change, generated the qos.json file and verified that the objective stated in "Why I did it" was met
- verified no error
### Description for the changelog
Update qos_config.j2 for Comptue-AI deployment on one of backend device type roles
* [swss] Chassis db clean up optimization and bug fixes
This commit includes the following changes:
- Fix for regression failure due to error in finding CHASSIS_APP_DB in
pizzabox (#PR 16451)
- After attempting to delete the system neighbor entries from
chassis db, before starting clearing the system interface entries,
wait for sometime only if some system neighbors were deleted.
If there are no system neighbors entries deleted for the asic coming up,
no need to wait.
- Similar changes for system lag delete. Before deleting the
system lag, wait for some time only if some system lag memebers were
deleted. If there are no system lag members deleted no need to wait.
- Flush the SYSTEM_NEIGH_TABLE from the local STATE_DB. While asic
is coming up, when system neigh entries are deleted from chassis ap
db (as part of chassis db clean up), there is no orchs/process running to
process the delete messages from chassis redis. Because of this, stale system
neigh are entries present in the local STATE_DB. The stale entries result in
creation of orphan (no corresponding data path/asic db entry) kernel neigh
entries during STATE_DB:SYSTEM_NEIGH_TABLE entries processing by nbrmgr (after
the swss serive came up). This is avoided by flushing the SYSTEM_NEIGH_TABLE from
the local STATE_DB when sevice comes up.
Signed-off-by: vedganes <veda.ganesan@nokia.com>
* [swss] Chassis db clean up bug fixes review comment fix - 1
Debug logs added for deletion of other tables (SYSTEM_INTERFACE and SYSTEM_LAG_TABLE)
Signed-off-by: vedganes <veda.ganesan@nokia.com>
---------
Signed-off-by: vedganes <veda.ganesan@nokia.com>
(cherry picked from commit b13b41fc22)
chassis-packet: Update arp_update script for FAILED and STALE check (#16311)
1. Fixing an issue with FAILED entry resolution retry.
Neighbor entries in arp table may sometimes enter a FAILED state when the far end is down and reports the state as follows:
2603:10e2:400:3::1 dev PortChannel19 router FAILED
While the arp_update script handles the entries for FAILED in the following format, the above was not handled due to the token location (extra router keyword at index 4):
2603:10e2:400:3::1 dev PortChannel19 FAILED
The former format may appear if an arp resolution is tried on a link that is known but the far end goes down, e.g., pinging a STALE entry while the far end is down.
2. Refreshing STALE entries to make sure the far end is reachable.
STALE entries for some backend ports may appear in chassis-packet when no traffic is received for a while on the port. When the far end goes down, it is expected for BFD to stop sending packets on the session for which the far end is not reachable. But as the entry is known as stale, on the Cisco chassis, BFD keeps sending packets. Refreshing the stale entry will keep active links as reachable in the neighbor table while the entries for the far end down will enter a failed state. FAILED state entries will be retired and entered reachable when far end comes back up.
On S6100 we are seeing almost 100K interrupts per second on intels i801 SMBUS controller which affects systems performance.
We now disable the i801 driver interrupt and instead enable polling
Microsoft ADO (number only): 24910530
How I did it
Disable the interrupt by passing the interrupt disable feature argument to i2c-i801 driver
How to verify it
This fix is NOT applicable for ARM based platforms. Applicable only for intel based platforms:-
- On SN2700 its already disabled in Mellanox hw-mgmt
- Celestica DX010 and E1031
- Dell S6100 verified the interrupts are no longer incrementing.
- Arista 7260CX3
Signed-off-by: Prince George <prgeor@microsoft.com>
Co-authored-by: Prince George <45705344+prgeor@users.noreply.github.com>
* Fix the Loopback0 IPv6 address of LC's in chassis not reachable from peer device's
* Assign the metric vaule for Ipv6 default route learnt via RA message to higher value so that BGP learnt default route is higher priority.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
Co-authored-by: abdosi <58047199+abdosi@users.noreply.github.com>
There is a redundant line in init_cfg.json.j2. It would cause pmon service always has "has_timer=False". However, we know that PMON has a timer now. So, I try to fix it here.
* [chassis]Chassis DB cleanup when asic comes up
Cleanup the entries from the following tables in chassis app db in
redis_chassis server in the supervisor
(1) SYSTEM_NEIGH
(2) SYSTEM_INTERFACE
(3) SYSTEM_LAG_MEMBER_TABLE
(4) SYSTEM_LAG_TABLE
As part of the clean up only those entries created by the asic that
is coming up are deleted. The LAG IDs used by the asics are also
de-allocated from SYSTEM_LAG_ID_TABLE and SYSTEM_LAG_ID_SET
- Added check to run the chassis db clean up only for voq switches.
Signed-off-by: vedganes <veda.ganesan@nokia.com>
Co-authored-by: vganesan-nokia <67648637+vganesan-nokia@users.noreply.github.com>
A workaround to back port the fix for a systemd issue.
The systemd issue: systemd/systemd#24668
The systemd PR to fix the issue: https://github.com/systemd/systemd/pull/24673/files
The formal solution should upgrade systemd to a version that contains the fix. But, systemd is a very basic service, upgrading systemd requires heavy test.
Fixes#15667 and #13293
Work item tracking
Microsoft ADO 24472854:
How I did it
On chassis supervisor bgp feature is disabled in hostcfgd. The dependency between swss and bgp causes the bgp containers to start even though the feature is disabled.
How to verify it
Tests on chassis supervisor and LC
Co-authored-by: Arvindsrinivasan Lakshmi Narasimhan <55814491+arlakshm@users.noreply.github.com>
* Fix CONFIG_DB_INITIALIZED flag check logic and set/reset flag for warm-reboot
* Fix db-cli usage
* Handle same image warm-reboot and generalize handling of INIT flag
* Cover boot from ONIE case: set config init flag when minigraph, config_db are missing
* Handle case: first boot of SONiC
* Check for config init flag
* Simplify logic, and do not call db_migrator for same image reboot
Co-authored-by: Vaibhav Hemant Dixit <vaibhav.dixit@microsoft.com>
Why I did it
The hw resources should be released before updating firmware.
How I did it
Added logic to release hw resources in syncd.sh script
Signed-off-by: Vadym Hlushko <vadymh@nvidia.com>
Co-authored-by: Vadym Hlushko <62022266+vadymhlushko-mlnx@users.noreply.github.com>
Why I did it
To reduce the container's dependency from host system
Work item tracking
Microsoft ADO (number only):
17713469
How I did it
Move the k8s container startup script to config engine container, other than mount it from host.
How to verify it
Check file path(/usr/share/sonic/scripts/container_startup.py) inside config engine container.
Signed-off-by: Yun Li <yunli1@microsoft.com>
Co-authored-by: Qi Luo <qiluo-msft@users.noreply.github.com>
