This change is adding asic_name, switch_id, switch_type and max_cores to sonic-device_metadata.yang
This should fix issue #9575
Co-authored-by: Maxime Lorrillere <mlorrillere@arista.com>
Why I did it
end2end test is blocked by Yang model for BGP_PEER_RANGE.
How I did it
Add new yang models.
How to verify it
Run UT for sonc-yang-models.
Signed-off-by: Gang Lv ganglv@microsoft.com
AS7816 support AT or non-AT DUT. They use different pmbus i2c bus. So use "pre_pddf_init.sh" to check this case.
Signed-off-by: Jostar Yang <jostar_yang@accton.com.tw>
PR #9481 changed auditd's log directory to be /var/log instead of
/var/log/audit, because SONiC mounts a disk image at /var/log during
runtime, and so the /var/log/audit directory might not exist (since it
would've been created during package installation, mounting another
partition at /var/log will hide it). However, for security reasons,
auditd changes the log directory to have 0750 permissions, so that not
everyone knows about the audit logs or read them.
To fix this, revert the change to auditd's log directory, and tell
systemd to create the audit log directory at runtime if it doesn't
exist. Because the disk image gets mounted during initramfs (before
systemd starts), systemd will make sure that the /var/log/audit
directory will exist.
Fixes#9548 and #10015
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
- Why I did it
The latest upgrade of Mellanox hw-mgmt V7.0020.1300 introduced a couple new kernel modules for new Mellanox platforms that have yet to be upstreamed to the linux kernel.
As these new platforms do not have SONiC support we elected not to upstream these new drivers to sonic-linux-kernel but hw-mgmt expects them to exist which is causing a non-functional error on switch boot.
Feb 15 00:09:55.374130 r-leopard-simx-74 ERR systemd-modules-load[269]: Failed to find module 'emc2305'
Feb 15 00:09:55.374141 r-leopard-simx-74 ERR systemd-modules-load[269]: Failed to find module 'ads1015'
To resolve this we can patch hw-mgmt to no longer attempt to load these modules by default.
- How I did it
Added a SONiC patch to Mellanox hw-mgmt in order to remove the unused kernel modules which were not upstreamed to sonic-linux-kernel
- How to verify it
Boot switch and verify there are no error logs regarding kernel modules failing to load.
- Why I did it
Stopping swss and syncd causes some driver module unloading. Those driver modules are depended by PMON. This could trigger ERROR logs in syslog.
- How I did it
Adjust warmboot shutdown order in make file
- How to verify it
Manual test
- Use the `wait_for_link.sh` script to delay ndppd start until after the VLAN interface is ready
- Avoids issue where ndppd tries to change interface attributes before the interface is ready
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
Why I did it
In the recent minigraph changes we add separate BGP session configuration for V4 and V6 internal VoQ neighbors.
This PR is adding different Peer groups for V4 and V6 neighbors
How I did it
Add VOQ_CHASSIS_V4_PEER and VOQ_CHASSIS_V6_PEER groups
Add extra Unit tests
How to verify it
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
- Why I did it
In SONiC thermal control algorithm, it compares thermal zone temperature with thermal zone threshold. Previously, a thermal zone with no thermal sensor can still get its threshold. However, a recently driver patch changes this behavior: a thermal zone with no thermal sensor will return 0 for threshold. We need to ignore such thermal zone.
- How I did it
Ignore thermal zones whose temperature is 0.
- How to verify it
Added unit test case and Manual test
- Why I did it
swsscommon.ConfigDBConnector does not automatically close connection when the instance is recycled by python. So, it should not create this instance each time calling check_services. It will cause error like Failed to read from file /var/run/hw-management/led/led_status_capability - OSError(24, 'Too many open files')
- How I did it
Only connect DB once in init
- How to verify it
Manual test
Why I did it
Introduce 2 sub jobs for kvmtest t0 job in sonic-mgmt repo in PR Azure/sonic-mgmt#4861
But in sonic-buildimage repo, because section parameter is null, it always run the part 2 test scripts in kvmtest t0 job.
It missed the part 1 test scripts in kvmtest.sh.
How I did it
Split kvmtest t0 job into two sub jobs such as sonic-mgmt repo and run them in parallel to save time.
How to verify it
Submit PR will trigger the pipeline to run.
Signed-off-by: Zhaohui Sun <zhaohuisun@microsoft.com>
* Update container_checker for multi-asic devices
Update container_checker for multi-asic devices to add database containers in always_running_containers.
Previous change was made for single-asic, and that database containers were not considered as feature when writing to state_db.
* Update container_checker
Update an indent
Signed-off-by: Ze Gan <ganze718@gmail.com>
b9337dc (HEAD, origin/master, origin/HEAD) [vslib]: Fix MACsec bug in SCI and XPN (#1003)
edbceb9 [syncd][vslib] Keep new warm boot discovered SERDES objects (#985)
af5c156 Fix build issues on gcc-10 (#999)
1445cd5 update SAI submoule (#1001)
48fe704 [ci] pipeline fixes for VS test (#1002)
f484cf9 Enable SAI_SWITCH_ATTR_UNINIT_DATA_PLANE_ON_REMOVAL attribute (#975)
5d0b22d Enable SAI_SWITCH_ATTR_UNINIT_DATA_PLANE_ON_REMOVAL attribute (#975)
1b8ce97 (origin/202111) [pipeline] Download swss common artifact in a separated directory (#995)
7a2e096 Change sonic-buildimage.vs artifact source from CI build to official build. (#992)
Fixes#10020
Why I did it
The platform api for parsing syseeprom information read from STATE DB has issue
with parsing the value part that has whitespace in the middle. The current
code assumes that the value part does not have whitespace. So everything after
the whitespace will be ignored. The syseeprom values returned from platform
API do not match the output of "show platform syseeprom".
How I did it
This change improved the regular expression for parsing syseeprom values to
accommodate whitespaces in the value.
How to verify it
Locally updated the code on a dx010 device. Call the platform API:
```
>>> import sonic_platform
>>> platform = sonic_platform.platform.Platform()
>>> chassis = platform.get_chassis()
>>> chassis.get_system_eeprom_info()
{'0x21': 'DX010', '0x22': 'R0872-F0020-02', '0x23': 'DX010B2F030A27BY200002', '0x24': '00:E0:EC:E7:71:0F', '0x25': '11/03/2020 21:22:56', '0x26': '3', '0x27': 'Seastone', '0x28': 'RANGELEY', '0x29': '2014.08', '0x2A': '131', '0x2B': 'CELESTICA', '0x2C': 'THA', '0x2D': 'Celestica', '0x2E': '1.0.5', '0x2F': 'LB', '0xFD': '', '0xFE': '0xAAB39BDB'}
```
Signed-off-by: Xin Wang <xiwang5@microsoft.com>
Generate the sai.profile base on the brcm j2 file if the sai.profile
is not existing in the dut mounted folder.
Change the supervisor service configuration accordingly.
Testing done:
Add the script and config in dut
saiservice server can start automatically with [systemctl start saiserver]
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
* Update sonic-swss
Signed-off-by: Ze Gan <ganze718@gmail.com>
* update swss
Signed-off-by: Ze Gan <ganze718@gmail.com>
* Update submodule update-swss
Signed-off-by: Ze Gan <ganze718@gmail.com>
```
Commits on Jan 31, 2022
[sonic-package-manager] implement blocking feature state change (#2035)
Commits on Feb 12, 2022
[ci] pipeline fixes for VS test (#2059)
Commits on Feb 14, 2022
[ci] allow download partially succeeded suilds for sonic-swss-pytests…
[build] allowPartiallySucceededBuilds true in the step of download so…
Commits on Feb 16, 2022
[config] Fix snmpagentaddress doesn't support the uppercase letters f…
Commits on Feb 17, 2022
[ci] Fix pipeline on build_and_install_module (#2074)
Enable diff coverage and set the threshold to 50% (#2061)
Commits on Feb 18, 2022
check for adding default vlan attempt added (#2075)
[GCU] Adding unit-test where path and ref paths are under the same YA…
[GCU] Turning port admin down before some critical port changes (#1998)
Commits on Feb 20, 2022
show_platfom_info not run for simx (#2042)
[aclshow] fix aclshow when clear is called before counters are popula…
```
#### Why I did it
Info: Attempting file://dev/vdb/onie-installer ...
Info: Attempting file://dev/vdb/onie-installer.bin ...
cp: write error: No space left on device
Failure: local_fs_run():/dev/vdb Unable to copy /tmp/tmp.CPY0ad/onie-installer.bin to tmpfs
vs image is failing. Increase kvm device space.
#### Why I did it
1. Fix Build exception [example](https://dev.azure.com/mssonic/build/_build/results?buildId=73911&view=logs&jobId=88ce9a53-729c-5fa9-7b6e-3d98f2488e3f&j=cef3d8a9-152e-5193-620b-567dc18af272&t=ac3bce9f-b126-5a26-3fee-28ce0ec1679d)
```
2022-02-19T01:54:23.4200556Z ImportError: cannot import name 'soft_unicode' from 'markupsafe' (/usr/local/lib/python3.8/dist-packages/markupsafe/__init__.py)
```
This is because Jinja2 uses MarkupSafe without specifying an upper limit to the version, MarkupSafe version that was released today removed 'soft_unicode'. So now Jinja2 is complaining.
Related issues:
https://github.com/pallets/jinja/issues/1591https://github.com/aws/aws-sam-cli/issues/3661
2. Reverts #9136
Fixing build failures in SONiC utils [example](https://dev.azure.com/mssonic/build/_build/results?buildId=73784&view=logs&jobId=83516c17-6666-5250-abde-63983ce72a49&j=83516c17-6666-5250-abde-63983ce72a49&t=6177235f-d4f1-5f72-835a-90ebb93a1784)
One of the errors:
```
TestPathAddressing.test_find_ref_paths__ref_is_the_whole_key__returns_ref_paths
self = <tests.generic_config_updater.gu_common_test.TestPathAddressing testMethod=test_find_ref_paths__ref_is_the_whole_key__returns_ref_paths>
def test_find_ref_paths__ref_is_the_whole_key__returns_ref_paths(self):
# Arrange
path = "/PORT/Ethernet0"
expected = [
"/ACL_TABLE/NO-NSW-PACL-V4/ports/0",
"/VLAN_MEMBER/Vlan1000|Ethernet0",
]
# Act
actual = self.path_addressing.find_ref_paths(path, Files.CROPPED_CONFIG_DB_AS_JSON)
# Assert
> self.assertEqual(expected, actual)
E AssertionError: Lists differ: ['/ACL_TABLE/NO-NSW-PACL-V4/ports/0', '/VLAN_MEMBER/Vlan1000|Ethernet0'] != ['/ACL_TABLE/NO-NSW-PACL-V4/ports/0']
E
E First list contains 1 additional elements.
E First extra element 1:
E '/VLAN_MEMBER/Vlan1000|Ethernet0'
E
E - ['/ACL_TABLE/NO-NSW-PACL-V4/ports/0', '/VLAN_MEMBER/Vlan1000|Ethernet0']
E + ['/ACL_TABLE/NO-NSW-PACL-V4/ports/0']
```
The VLAN_MEMBER backlink (can be called referrer link or ref link) is not found.
Issue introduced by https://github.com/Azure/sonic-buildimage/pull/9136
I don't know how this PR passed the build system, it should have failed.
Known YANG issue https://github.com/Azure/sonic-buildimage/issues/9312
#### How I did it
The import to `sonic-vlan` is breaking the build
```
import sonic-vlan {
prefix vlan;
}
```
I am not sure if that's the only issue, so I think reverting the whole PR should be the safer option.
#### How to verify it
Ran sonic-utils tests locally.
sonic-swss-common:
[ci] Set diff coverage threshold to 50% (#567)
Added NVGRE tunnel related tables (#549)
Add option to suppress logging (#566)
[TableBase] Make channel name from both table name and database ID (#568)
Revert "[TableBase] Make channel name from both table name and database ID (#568)" (#574)
sonic-py-swsssdk:
Add option to suppress warnings when querying Redis (#115)
* Add support for Accton wedge100bf_32qs platform
This pull request is based on wedge100bf_32x.
The components on the mainboard are the same as wedge100bf_32x, except for tofino 32Q and COMe models, so it refers to wedge100bf_32x to create new model: wedge100bf_32qs.
Signed-off-by: alvin_feng <alvin_feng@accton.com>
* Fix lgtm alerts issues
Signed-off-by: alvin_feng <alvin_feng@accton.com>
* Modify some file permissions and use symlink to link wedge100bf-32qs/sonic_platform
Signed-off-by: alvin_feng <alvin_feng@accton.com>
* Remove switch-sai.conf file
Signed-off-by: alvin_feng <alvin_feng@accton.com>
* Modify platform.json to avoid platform TCs issues and changes for correct generating BUFFER_QUEUE values in DB.
Signed-off-by: alvin_feng <alvin_feng@accton.com>
* Fix error name in platform.json
* [PTF-SAIv2]Add ptf dockre for sai-ptf (saiv2)
Base on current ptf docker create a new docker for sai-ptf(saiv2)
upgrade related package
use the latest ptf and install it
test done:
NOJESSIE=1 NOSTRETCH=1 NOBULLSEYE=1 ENABLE_SYNCD_RPC=y make target/docker-ptf-sai.gz
BLDENV=buster make -f Makefile.work target/docker-ptf-sai.gz
* upgrade the thrift to 014
- Why I did it
NVGRE Tunnel feature extends the Config DB with new tables. These tables require a new YANG model.
- How I did it
Added a new YANG model sonic-nvgre-tunnel.yang
- How to verify it
Added YANG test cases.
Signed-off-by: Vadym Hlushko <vadymh@nvidia.com>
This issue causes negative threshold value and thus deleting log files even when there is enough space.
This issue causes negative threshold value and thus deleting log files even when there is enough space.
- Why I did it
To fix an issue when log files get deleted even if there is enough space.
- How I did it
Fixed an typo.
- How to verify it
Run the portion of the script that calculates threshold, see that the threshold is calculated correctly.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Why I did it
Radvd.conf.j2 template creates two copies of the vlan interface when there are more than one ipv6 address assigned to a single vlan interface. Changed the format to add prefixes under the same vlan interface block.
How I did it
Modifies radvd.conf.j2 and added unit tests
How to verify it
Configure multiple ipv6 address to the same vlan, start radvd
Unit test will check if radvd.conf with multiple ipv6 addresses is formed correctly
#### Why I did it
The current redis version of SONiC is `6.0.6`, which contains many high-risky security issues like CVEs that are fixed in the latest version. The Redis release notes also highly recommend to upgrade with SECURITY urgency.
```
================================================================================
Redis 6.0.16 Released Mon Oct 4 12:00:00 IDT 2021
================================================================================
Upgrade urgency: SECURITY, contains fixes to security issues.
Security Fixes:
* (CVE-2021-41099) Integer to heap buffer overflow handling certain string
commands and network payloads, when proto-max-bulk-len is manually configured
to a non-default, very large value [reported by yiyuaner].
* (CVE-2021-32762) Integer to heap buffer overflow issue in redis-cli and
redis-sentinel parsing large multi-bulk replies on some older and less common
platforms [reported by Microsoft Vulnerability Research].
* (CVE-2021-32687) Integer to heap buffer overflow with intsets, when
set-max-intset-entries is manually configured to a non-default, very large
value [reported by Pawel Wieczorkiewicz, AWS].
* (CVE-2021-32675) Denial Of Service when processing RESP request payloads with
a large number of elements on many connections.
* (CVE-2021-32672) Random heap reading issue with Lua Debugger [reported by
Meir Shpilraien].
* (CVE-2021-32628) Integer to heap buffer overflow handling ziplist-encoded
data types, when configuring a large, non-default value for
hash-max-ziplist-entries, hash-max-ziplist-value, zset-max-ziplist-entries
or zset-max-ziplist-value [reported by sundb].
* (CVE-2021-32627) Integer to heap buffer overflow issue with streams, when
configuring a non-default, large value for proto-max-bulk-len and
client-query-buffer-limit [reported by sundb].
* (CVE-2021-32626) Specially crafted Lua scripts may result with Heap buffer
overflow [reported by Meir Shpilraien].
Other bug fixes:
* Fix appendfsync to always guarantee fsync before reply, on MacOS and FreeBSD (kqueue) (#9416)
* Fix the wrong mis-detection of sync_file_range system call, affecting performance (#9371)
* Fix replication issues when repl-diskless-load is used (#9280)
```
#### How I did it
Edit `Dockerfile.j2` file
#### How to verify it
Check redis version
#### Description for the changelog
This PR will upgrade redis-server version to `6.0.16`.
#### Why I did it
To bump the Thrift version to 0.14.1
- To avoid [CVE-2020-13949](https://nvd.nist.gov/vuln/detail/CVE-2020-13949)
- to fix some dependencies issues
#### How I did it
- rename `src/thrfit_0_13_0` to `src/thrift_2` to remove version number in the path. (`src/thrift` contains rules to build thrift 0.11.0 )
- Add thrift sources as submodule as there are no prepared debian packages for version >0.13.0 on [debian.org](https://packages.debian.org/search?searchon=sourcenames&keywords=thrift)
- Added patches with fixes for original thrift debian rules:(remove unneeded packages, fix multi job build)
#### How to verify it
```
BLDENV=buster make -f Makefile.work target/debs/buster/libthrift-dev_0.14.1_amd64.deb
```
- Why I did it
Error log was shown on switches during boot
pmon#supervisord 2021-12-22 04:27:16,709 INFO exited: chassis_db_init (exit status 0; not expected)
- How I did it
Add exit code zero as an expected exit code and also disable autorestart.
- How to verify it
Boot the switch and ensure the above log line does not appear.
Updating template description to include link to configuration schema for YANG module changes.
#### Why I did it
Updating template description to include link to configuration schema for YANG module changes. When reviewing yang models it becomes difficult to know the entire schema for the table for which yang is defined. Besides providing a clear picture, it will also help to document the config_db schema which is not upto date.
#### How I did it
Updating template file
- Why I did it
Update MFT to version 4.18.1-16 for bugs fixes and new SN2201 support
- How I did it
Advance to MFT tool version to 4.18.1-16
- How to verify it
Manually tested on all Mellanox platforms (ASIC FW Upgrade, link debug tools, CPLD upgrade, etc.)
