- Why I did it
There is a issue for counters after warm-reboot:
If I clear counters by command "sonic-clear counters", then execute 'warm-reboot' and whenSONiC is restart, the counters showed with command "show interface counters" is still old counters before "sonic-clear". It is not the right counters because the counters file in '/tmp' is lost in warm-reboot process.
- How I did it
I fixed it by saving '/tmp/portstat-0' folders in '/host/' before executing 'warm-reboot' (in pull request Azure/sonic-utilities#1099 ), and restore the counters folders back to '/tmp/' after warm-reboot process is finished.
- How to verify it
Clear counters by command 'sonic-clear'
sonic-clear counters
sonic-clear dropcounters
sonic-clear pfccounters
sonic-clear queuecounters
sonic-clear rifcounters
Execute 'warm-reboot'
Use command ‘show interface counters’ to see if the counters is right.
**- Why I did it**
We were building a custom version of Supervisor because I had added patches to prevent hangs and crashes if the system clock ever rolled backward. Those changes were merged into the upstream Supervisor repo as of version 3.4.0 (http://supervisord.org/changes.html#id9), therefore, we should be able to simply install the vanilla package via pip. This will also allow us to easily move to Python 3, as Python 3 support was added in version 4.0.0.
**- How I did it**
- Remove Makefiles and patches for building supervisor package from source
- Install Python 3 supervisor package version 4.2.1 in Buster base container
- Also install Python 3 version of supervisord-dependent-startup in Buster base container
- Debian package installed binary in `/usr/bin/`, but pip package installs in `/usr/local/bin/`, so rather than update all absolute paths, I changed all references to simply call `supervisord` and let the system PATH find the executable to prevent future need for changes just in case we ever need to switch back to build a Debian package, then we won't need to modify these again.
- Install Python 2 supervisor package >= 3.4.0 in Stretch and Jessie base containers
* Add explicit default state into the constants.yml
* Enable/disable only peer-groups, available in the config
* Retrieve updates from frr before using configuration
Co-authored-by: Pavel Shirshov <pavel.contrib@gmail.com>
Summary: Move teamd functions to a new service script
Motivation: To segregate teamd functions in one common place. fast-reboot script calls teamd functions that should ideally be replaced by a simple call to a service script.
Changes: New teamd service script and path modification from /usr/bin/teamd.sh to /usr/local/bin/teamd.sh
fast-reboot script (in sonic-utilities) modification (to use new teamd.sh to stop teamd) should follow soon after this change.
Verification: VS image tests.
Signed-off-by: Vaibhav Hemant Dixit <vaibhav.dixit@microsoft.com>
Co-authored-by: heidi.ou@alibaba-inc.com <heidi.ou@alibaba-inc.com>
Co-authored-by: Ying Xie <ying.xie@microsoft.com>
This change introduces PDDF which is described here: https://github.com/Azure/SONiC/pull/536
Most of the platform bring up effort goes in developing the platform device drivers, SONiC platform APIs and validating them. Typically each platform vendor writes their own drivers and platform APIs which is very tailor made to that platform. This involves writing code, building, installing it on the target platform devices and testing. Many of the details of the platform are hard coded into these drivers, from the HW spec. They go through this cycle repetitively till everything works fine, and is validated before upstreaming the code.
PDDF aims to make this platform driver and platform APIs development process much simpler by providing a data driven development framework. This is enabled by:
JSON descriptor files for platform data
Generic data-driven drivers for various devices
Generic SONiC platform APIs
Vendor specific extensions for customisation and extensibility
Signed-off-by: Fuzail Khan <fuzail.khan@broadcom.com>
* Remove 'backend' from device type strings so that backend devices ('BackEndToRRouter' and 'BackEndLeafRouter') are given the same cable lengths as regular device types.
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
Treat devices that are ToRRouters (ToRRouters and BackEndToRRouters) the same when rendering templates
Except for BackEndToRRouters belonging to a storage cluster, since these devices have extra sub-interfaces created
Treat devices that are LeafRouters (LeafRouters and BackEndLeafRouters) the same when rendering templates
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
When forced mgmt routes are present, the issue fixed as part of #5754 is not complete.
Added a preference(priority) field to forced mgmt route ip rules
In multi asic platforms the "show ip bgp summary" commands is not available for user with read only privileges, so to fix this the vtysh command with the new "-n" option, added for multi asic platforms, needs to be added to the READ_ONLY_COMMANDS list in the sudoers files. Added the command vtysh -n [0-9] -c show * to list of READ_ONLY_COMMANDS in the sudoers files in this commit.
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
API getMount() API was not updated to handle multi-asic platforms
Updated API getMount() to return abspath() for Docker Mount Point
and use that one for mount point comparison
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
To consolidate host services and install via packages instead of file-by-file, also as part of migrating all of SONiC to Python 3, as Python 2 is no longer supported.
Our use case is to register new features in runtime. The previous change which introduced the cache broke this capability and caused hostcfgd crash.
Signed-off-by: Stepan Blyshchak <stepanb@nvidia.com>
- Convert core_uploader.py script to Python 3
- Use logger from sonic-py-common for uniform logging
- Reorganize imports alphabetically per PEP8 standard
- Two blank lines precede functions per PEP8 standard
- Remove unnecessary global variable declarations
- Convert to Python 3
- Fix bug: `CORE_FILE_DIR` previously was set to `os.path.basename(__file__)`, which would resolve to the script name. Fix this by hardcoding to `/var/core/` instead
- Remove locally-define logging functions; use Logger class from sonic-py-common instead
- Convert script to Python 3
- Need to open file in binary mode before hashing due to new string data type in Python 3 being unicode by default. This should probably have been done regardless.
- Reorganize imports alphabetically
- When running the script, don't explicitly call `python`. Instead let the program loader use the interpreter specified in the shebang (which is now `python3`).
* This was a temporary fix for orchagent spamming log messages and causing rate limiting, leading to critical messages being dropped for the syslog. No longer needed since Azure/sonic-sairedis#680 was merged.
* Build and install openssh from source
* Copy openssh deb package to dest folder
* Update make rule
* Update sonic debian extension
* Append empty line before EOF
* Update openssh patch
* Add openssh-server to base image dependency
* Fix indent type
* Fix comments
* Use commit id instead of tag id and add comment
Signed-off-by: Jing Kan jika@microsoft.com
FixAzure/SONiC#551
When eth0 IP address is configured, an ip rule is getting added for eth0 IP address through the interfaces.j2 template.
This eth0 ip rule creates an issue when VRF (data VRF or management VRF) is also created in the system.
When any VRF (data VRF or management VRF) is created, a new rule is getting added automatically by kernel as "1000: from all lookup [l3mdev-table]".
This l3mdev IP rule is never getting deleted even if VRF is deleted.
Once if this l3mdev IP rule is added, if user configures IP address for the eth0 interface, interfaces.j2 adds an eth0 IP rule as "1000:from 100.104.47.74 lookup default ". Priority 1000 is automatically chosen by kernel and hence this rule gets higher priority than the already existing rule "1001:from all lookup local ".
This results in an issue "ping from console to eth0 IP does not work once if VRF is created" as explained in Issue 551.
More details and possible solutions are explained as comments in the Issue551.
This PR is to resolve the issue by always fixing the low priority 32765 for the IP rule that is created for the eth0 IP address.
Tested with various combinations of VRF creation, deletion and IP address configuration along with ping from console to eth0 IP address.
Co-authored-by: Kannan KVS <kannan_kvs@dell.com>
Why/How I did:
Make sure first error syslog is triggered based on FAULT TOLERANCE condition.
Added support of repeat clause with alert action. This is used as trigger
for generation of periodic syslog error messages if error is persistent
Updated the monit conf files with repeat every x cycles for the alert action
- Why I did it
The update_all_feature_states can run in the range of 20+ seconds to one minute. With load of AAA & Tacacs preceding it, any DB updates in AAA/TACACS during the long running feature updates would get missed. To avoid, switch the order.
- How I did it
Do a load after after updating all feature states.
- How to verify it
Not a easy one
Have a script that
restart hostcfgd
sleep 2s
run redis-cli/config command to update AAA/TACACS table
Run the script above and watch the file /etc/pam.d/common-auth-sonic for a minute.
- When it repro:
The updates will not reflect in /etc/pam.d/common-auth-sonic
As part of the transition from Python 2 to Python 3, we are installing both pip2 and pip3 in the slave and config-engine containers. This PR replaces calls to `pip` in these containers with an explicit call to `pip2` to ensure the proper version of pip is executed, no matter which version of pip is aliased to `pip`, as we no longer rely on that alias.
Also some other pip-related cleanup
To consolidate host services and install via packages instead of file-by-file, also as part of migrating all of SONiC to Python 3, as Python 2 is no longer supported, convert caclmgrd to Python 3 and add to sonic-host-services package
* Initial commit for BGP internal neighbor table support.
> Add new template named "internal" for the internal BGP sessions
> Add a new table in database "BGP_INTERNAL_NEIGHBOR"
> The internal BGP sessions will be stored in this new table "BGP_INTERNAL_NEIGHBOR"
* Changes in template generation tests with the introduction of internal neighbor template files.
remove syncd from critical process list because
gbsyncd process will exit for platform without
gearbox.
closes#5623
Signed-off-by: Guohan Lu <lguohan@gmail.com>
The psutil library used in process_checker create a cache for each
process when calling process_iter. So, there is some possibility that
one process exists when calling process_iter, but not exists when
calling cmdline, which will raise a NoSuchProcess exception. This commit
fix the issue.
Signed-off-by: bingwang <bingwang@microsoft.com>
The orchagent and syncd need to have the same default synchronous mode configuration. This PR adds a template file to translate the default value in CONFIG_DB (empty field) to an explicit mode so that the orchagent and syncd could have the same default mode.
**- Why I did it**
Install all host services and their data files in package format rather than file-by-file
**- How I did it**
- Create sonic-host-services Python wheel package, currently including procdockerstatsd
- Also add the framework for unit tests by adding one simple procdockerstatsd test case
- Create sonic-host-services-data Debian package which is responsible for installing the related systemd unit files to control the services in the Python wheel. This package will also be responsible for installing any Jinja2 templates and other data files needed by the host services.
**- Why I did it**
On teamd docker restart, the swss and syncd needs to be restarted as there are dependent resources present.
**- How I did it**
Add the teamd as a dependent service for swss
Updated the docker-wait script to handle service and dependent services separately.
Handle the case of warm-restart for the dependent service
**- How to verify it**
Verified the following scenario's with the following testbed
VM1 ----------------------------[DUT 6100] -----------------------VM2, ping traffic continuous between VMs
1. Stop teamd docker alone
> swss, syncd dockers seen going away
> The LAG reference count error messages seen for a while till swss docker stops.
> Dockers back up.
2. Enable WR mode for teamd. Stop teamd docker alone
> swss, syncd dockers not removed.
> The LAG reference count error messages not seen
> Repeated stop teamd docker test - same result, no effect on swss/syncd.
3. Stop swss docker.
> swss, teamd, syncd goes off - dockers comes back correctly, interfaces up
4. Enable WR mode for swss . Stop swss docker
> swss goes off not affecting syncd/teamd dockers.
5. Config reload
> no reference counter error seen, dockers comes back correctly, with interfaces up
6. Warm reboot, observations below
> swss docker goes off first
> teamd + syncd goes off to the end of WR process.
> dockers comes back up fine.
> ping traffic between VM's was NOT HIT
7. Fast reboot, observations below
> teamd goes off first ( **confirmed swss don't exit here** )
> swss goes off next
> syncd goes away at the end of the FR process
> dockers comes back up fine.
> there is a traffic HIT as per fast-reboot
8. Verified in multi-asic platform, the tests above other than WR/FB scenarios
**- Why I did it**
If we ran the CLI commands `sudo config feature autorestart snmp disabled/enabled` or `sudo config feature autorestart swss disabled/enabled`, then SNMP container will be stopped and started. This behavior was not expected since we updated the `auto_restart` field not update `state` field in `FEATURE` table. The reason behind this issue is that either `state` field or `auto_restart` field was updated, the function `update_feature_state(...)` will be invoked which then starts snmp.timer service.
The snmp.timer service will first stop snmp.service and later start snmp.service.
In order to solve this issue, the function `update_feature_state(...)` will be only invoked if `state` field in `FEATURE` table was
updated.
**- How I did it**
When the demon `hostcfgd` was activated, all the values of `state` field in `FEATURE` table of each container will be
cached. Each time the function `feature_state_handler(...)` is invoked, it will determine whether the `state` field of a
container was changed or not. If it was changed, function `update_feature_state(...)` will be invoked and the cached
value will also be updated. Otherwise, nothing will be done.
**- How to verify it**
We can run the CLI commands `sudo config feature autorestart snmp disabled/enabled` or `sudo config feature autorestart swss disabled/enabled` to check whether SNMP container is stopped and started. We also can run the CLI commands `sudo config feature state snmp disabled/enabled` or `sudo config feature state swss disabled/enabled` to check whether the container is stopped and restarted.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
**- Why I did it**
To introduce dynamic support of BBR functionality into bgpcfgd.
BBR is adding `neighbor PEER_GROUP allowas-in 1' for all BGP peer-groups which points to T0
Now we can add and remove this configuration based on CONFIG_DB entry
**- How I did it**
I introduced a new CONFIG_DB entry:
- table name: "BGP_BBR"
- key value: "all". Currently only "all" is supported, which means that all peer-groups which points to T0s will be updated
- data value: a dictionary: {"status": "status_value"}, where status_value could be either "enabled" or "disabled"
Initially, when bgpcfgd starts, it reads initial BBR status values from the [constants.yml](https://github.com/Azure/sonic-buildimage/pull/5626/files#diff-e6f2fe13a6c276dc2f3b27a5bef79886f9c103194be4fcb28ce57375edf2c23cR34). Then you can control BBR status by changing "BGP_BBR" table in the CONFIG_DB (see examples below).
bgpcfgd knows what peer-groups to change fron [constants.yml](https://github.com/Azure/sonic-buildimage/pull/5626/files#diff-e6f2fe13a6c276dc2f3b27a5bef79886f9c103194be4fcb28ce57375edf2c23cR39). The dictionary contains peer-group names as keys, and a list of address-families as values. So when bgpcfgd got a request to change the BBR state, it changes the state only for peer-groups listed in the constants.yml dictionary (and only for address families from the peer-group value).
**- How to verify it**
Initially, when we start SONiC FRR has BBR enabled for PEER_V4 and PEER_V6:
```
admin@str-s6100-acs-1:~$ vtysh -c 'show run' | egrep 'PEER_V.? allowas'
neighbor PEER_V4 allowas-in 1
neighbor PEER_V6 allowas-in 1
```
Then we apply following configuration to the db:
```
admin@str-s6100-acs-1:~$ cat disable.json
{
"BGP_BBR": {
"all": {
"status": "disabled"
}
}
}
admin@str-s6100-acs-1:~$ sonic-cfggen -j disable.json -w
```
The log output are:
```
Oct 14 18:40:22.450322 str-s6100-acs-1 DEBUG bgp#bgpcfgd: Received message : '('all', 'SET', (('status', 'disabled'),))'
Oct 14 18:40:22.450620 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-f', '/tmp/tmpmWTiuq']'.
Oct 14 18:40:22.681084 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-c', 'clear bgp peer-group PEER_V4 soft in']'.
Oct 14 18:40:22.904626 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-c', 'clear bgp peer-group PEER_V6 soft in']'.
```
Check FRR configuraiton and see that no allowas parameters are there:
```
admin@str-s6100-acs-1:~$ vtysh -c 'show run' | egrep 'PEER_V.? allowas'
admin@str-s6100-acs-1:~$
```
Then we apply enabling configuration back:
```
admin@str-s6100-acs-1:~$ cat enable.json
{
"BGP_BBR": {
"all": {
"status": "enabled"
}
}
}
admin@str-s6100-acs-1:~$ sonic-cfggen -j enable.json -w
```
The log output:
```
Oct 14 18:40:41.074720 str-s6100-acs-1 DEBUG bgp#bgpcfgd: Received message : '('all', 'SET', (('status', 'enabled'),))'
Oct 14 18:40:41.074720 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-f', '/tmp/tmpDD6SKv']'.
Oct 14 18:40:41.587257 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-c', 'clear bgp peer-group PEER_V4 soft in']'.
Oct 14 18:40:42.042967 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-c', 'clear bgp peer-group PEER_V6 soft in']'.
```
Check FRR configuraiton and see that the BBR configuration is back:
```
admin@str-s6100-acs-1:~$ vtysh -c 'show run' | egrep 'PEER_V.? allowas'
neighbor PEER_V4 allowas-in 1
neighbor PEER_V6 allowas-in 1
```
*** The test coverage ***
Below is the test coverage
```
---------- coverage: platform linux2, python 2.7.12-final-0 ----------
Name Stmts Miss Cover
----------------------------------------------------
bgpcfgd/__init__.py 0 0 100%
bgpcfgd/__main__.py 3 3 0%
bgpcfgd/config.py 78 41 47%
bgpcfgd/directory.py 63 34 46%
bgpcfgd/log.py 15 3 80%
bgpcfgd/main.py 51 51 0%
bgpcfgd/manager.py 41 23 44%
bgpcfgd/managers_allow_list.py 385 21 95%
bgpcfgd/managers_bbr.py 76 0 100%
bgpcfgd/managers_bgp.py 193 193 0%
bgpcfgd/managers_db.py 9 9 0%
bgpcfgd/managers_intf.py 33 33 0%
bgpcfgd/managers_setsrc.py 45 45 0%
bgpcfgd/runner.py 39 39 0%
bgpcfgd/template.py 64 11 83%
bgpcfgd/utils.py 32 24 25%
bgpcfgd/vars.py 1 0 100%
----------------------------------------------------
TOTAL 1128 530 53%
```
**- Which release branch to backport (provide reason below if selected)**
- [ ] 201811
- [x] 201911
- [x] 202006
use correct chassisdb.conf path while bringing up chassis_db service on VoQ modular switch.chassis_db service on VoQ modular switch.
resolves#5631
Signed-off-by: Honggang Xu <hxu@arista.com>
There is currently a bug where messages from swss with priority lower than the current log level are still being counted against the syslog rate limiting threshhold. This leads to rate-limiting in syslog when the rate-limiting conditions have not been met, which causes several sonic-mgmt tests to fail since they are dependent on LogAnalyzer. It also omits potentially useful information from the syslog. Only rate-limiting messages of level INFO and lower allows these tests to pass successfully.
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
**- Why I did it**
I was asked to change "Allow list" prefix-list generation rule.
Previously we generated the rules using following method:
```
For each {prefix}/{masklen} we would generate the prefix-rule
permit {prefix}/{masklen} ge {masklen}+1
Example:
Prefix 1.2.3.4/24 would have following prefix-list entry generated
permit 1.2.3.4/24 ge 23
```
But we discovered the old rule doesn't work for all cases we have.
So we introduced the new rule:
```
For ipv4 entry,
For mask < 32 , we will add ‘le 32’ to cover all prefix masks to be sent by T0
For mask =32 , we will not add any ‘le mask’
For ipv6 entry, we will add le 128 to cover all the prefix mask to be sent by T0
For mask < 128 , we will add ‘le 128’ to cover all prefix masks to be sent by T0
For mask = 128 , we will not add any ‘le mask’
```
**- How I did it**
I change prefix-list entry generation function. Also I introduced a test for the changed function.
**- How to verify it**
1. Build an image and put it on your dut.
2. Create a file test_schema.conf with the test configuration
```
{
"BGP_ALLOWED_PREFIXES": {
"DEPLOYMENT_ID|0|1010:1010": {
"prefixes_v4": [
"10.20.0.0/16",
"10.50.1.0/29"
],
"prefixes_v6": [
"fc01:10::/64",
"fc02:20::/64"
]
},
"DEPLOYMENT_ID|0": {
"prefixes_v4": [
"10.20.0.0/16",
"10.50.1.0/29"
],
"prefixes_v6": [
"fc01:10::/64",
"fc02:20::/64"
]
}
}
}
```
3. Apply the configuration by command
```
sonic-cfggen -j test_schema.conf --write-to-db
```
4. Check that your bgp configuration has following prefix-list entries:
```
admin@str-s6100-acs-1:~$ show runningconfiguration bgp | grep PL_ALLOW
ip prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_1010:1010_V4 seq 10 deny 0.0.0.0/0 le 17
ip prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_1010:1010_V4 seq 20 permit 127.0.0.1/32
ip prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_1010:1010_V4 seq 30 permit 10.20.0.0/16 le 32
ip prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_1010:1010_V4 seq 40 permit 10.50.1.0/29 le 32
ip prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_empty_V4 seq 10 deny 0.0.0.0/0 le 17
ip prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_empty_V4 seq 20 permit 127.0.0.1/32
ip prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_empty_V4 seq 30 permit 10.20.0.0/16 le 32
ip prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_empty_V4 seq 40 permit 10.50.1.0/29 le 32
ipv6 prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_1010:1010_V6 seq 10 deny ::/0 le 59
ipv6 prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_1010:1010_V6 seq 20 deny ::/0 ge 65
ipv6 prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_1010:1010_V6 seq 30 permit fc01:10::/64 le 128
ipv6 prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_1010:1010_V6 seq 40 permit fc02:20::/64 le 128
ipv6 prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_empty_V6 seq 10 deny ::/0 le 59
ipv6 prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_empty_V6 seq 20 deny ::/0 ge 65
ipv6 prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_empty_V6 seq 30 permit fc01:10::/64 le 128
ipv6 prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_empty_V6 seq 40 permit fc02:20::/64 le 128
```
Co-authored-by: Pavel Shirshov <pavel.contrib@gmail.com>
When a large number of changes occur to the ACL table of Config DB, caclmgrd will get flooded with notifications, and previously, it would regenerate and apply the iptables rules for each change, which is unnecessary, as the iptables rules should only get applied once after the last change notification is received. If the ACL table contains a large number of control plane ACL rules, this could cause a large delay in caclmgrd getting the rules applied.
This patch causes caclmgrd to delay updating the iptables rules until it has not received a change notification for at least 0.5 seconds.
bring up chassisdb service on sonic switch according to the design in
Distributed Forwarding in VoQ Arch HLD
Signed-off-by: Honggang Xu <hxu@arista.com>
**- Why I did it**
To bring up new ChassisDB service in sonic as designed in ['Distributed forwarding in a VOQ architecture HLD' ](90c1289eaf/doc/chassis/architecture.md).
**- How I did it**
Implement the section 2.3.1 Global DB Organization of the VOQ architecture HLD.
**- How to verify it**
ChassisDB service won't start without chassisdb.conf file on the existing platforms.
ChassisDB service is accessible with global.conf file in the distributed arichitecture.
Signed-off-by: Honggang Xu <hxu@arista.com>
We were building our own python-click package because we needed features/bug fixes available as of version 7.0.0, but the most recent version available from Debian was in the 6.x range.
"Click" is needed for building/testing and installing sonic-utilities. Now that we are building sonic-utilities as a wheel, with Click specified as a dependency in the setup.py file, setuptools will install a more recent version of Click in the sonic-slave-buster container when building the package, and pip will install a more recent version of Click in the host OS of SONiC when installing the sonic-utilities package. Also, we don't need to worry about installing the Python 2 or 3 version of the package, as the proper one will be installed as necessary.
* Optimze ACL Table/Rule notifcation handling
to loop pop() until empty to consume all the data in a batch
This wau we prevent multiple call to iptable updates
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Address review comments
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* system health first commit
* system health daemon first commit
* Finish healthd
* Changes due to lower layer logic change
* Get ASIC temperature from TEMPERATURE_INFO table
* Add system health make rule and service files
* fix bugs found during manual test
* Change make file to install system-health library to host
* Set system LED to blink on bootup time
* Caught exceptions in system health checker to make it more robust
* fix issue that fan/psu presence will always be true
* fix issue for external checker
* move system-health service to right after rc-local service
* Set system-health service start after database service
* Get system up time via /proc/uptime
* Provide more information in stat for CLI to use
* fix typo
* Set default category to External for external checker
* If external checker reported OK, save it to stat too
* Trim string for external checker output
* fix issue: PSU voltage check always return OK
* Add unit test cases for system health library
* Fix LGTM warnings
* fix demo comments: 1. get boot up timeout from monit configuration file; 2. set system led in library instead of daemon
* Remove boot_timeout configuration because it will get from monit config file
* Fix argument miss
* fix unit test failure
* fix issue: summary status is not correct
* Fix format issues found in code review
* rename th to threshold to make it clearer
* Fix review comment: 1. add a .dep file for system health; 2. deprecated daemon_base and uses sonic-py-common instead
* Fix unit test failure
* Fix LGTM alert
* Fix LGTM alert
* Fix review comments
* Fix review comment
* 1. Add relevant comments for system health; 2. rename external_checker to user_define_checker
* Ignore check for unknown service type
* Fix unit test issue
* Rename user define checker to user defined checker
* Rename user_define_checkers to user_defined_checkers for configuration file
* Renmae file user_define_checker.py -> user_defined_checker.py
* Fix typo
* Adjust import order for config.py
Co-authored-by: Joe LeVeque <jleveque@users.noreply.github.com>
* Adjust import order for src/system-health/health_checker/hardware_checker.py
Co-authored-by: Joe LeVeque <jleveque@users.noreply.github.com>
* Adjust import order for src/system-health/scripts/healthd
Co-authored-by: Joe LeVeque <jleveque@users.noreply.github.com>
* Adjust import orders in src/system-health/tests/test_system_health.py
* Fix typo
* Add new line after import
* If system health configuration file not exist, healthd should exit
* Fix indent and enable pytest coverage
* Fix typo
* Fix typo
* Remove global logger and use log functions inherited from super class
* Change info level logger to notice level
Co-authored-by: Joe LeVeque <jleveque@users.noreply.github.com>
any event happening on ACL Rule Table (eg DATAACL rules
programmed) caused control plane default action to be triggered.
Now Control Plance ACTION will be trigger only
a) ACL Rule beloging to Control ACL Table
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
To address issue #5525
Explicitly control the grub installation requirement when it is needed.
We have scenario where configuration migration happened but grub
installation is not required.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
implements a new feature: "BGP Allow list."
This feature allows us to control which IP prefixes are going to be advertised via ebgp from the routes received from EBGP neighbors.
implements a new feature: "BGP Allow list."
This feature allows us to control which IP prefixes are going to be advertised via ebgp from the routes received from EBGP neighbors.
* [Multi-Asic] Forward SNMP requests destined to loopback IP, and coming in through the front panel interface
present in the network namespace, to SNMP agent running in the linux host.
* Updates based on comments
* Further updates in docker_image_ctl.j2 and caclmgrd
* Change the variable for net config file.
* Updated the comments in the code.
* No need to clean up the exising NAT rules if present, which could be created by some other process.
* Delete our rule first and add it back, to take care of caclmgrd restart.
Another benefit is that we delete only our rules, rather than earlier approach of "iptables -F" which cleans up all rules.
* Keeping the original logic to clean the NAT entries, to revist when NAT feature added in namespace.
* Missing updates to log_info call.
* buildimage: Add gearbox phy device files and a new physyncd docker to support VS gearbox phy feature
* scripts and configuration needed to support a second syncd docker (physyncd)
* physyncd supports gearbox device and phy SAI APIs and runs multiple instances of syncd, one per phy in the device
* support for VS target (sonic-sairedis vslib has been extended to support a virtual BCM81724 gearbox PHY).
HLD is located at b817a12fd8/doc/gearbox/gearbox_mgr_design.md
**- Why I did it**
This work is part of the gearbox phy joint effort between Microsoft and Broadcom, and is based
on multi-switch support in sonic-sairedis.
**- How I did it**
Overall feature was implemented across several projects. The collective pull requests (some in late stages of review at this point):
https://github.com/Azure/sonic-utilities/pull/931 - CLI (merged)
https://github.com/Azure/sonic-swss-common/pull/347 - Minor changes (merged)
https://github.com/Azure/sonic-swss/pull/1321 - gearsyncd, config parsers, changes to orchargent to create gearbox phy on supported systems
https://github.com/Azure/sonic-sairedis/pull/624 - physyncd, virtual BCM81724 gearbox phy added to vslib
**- How to verify it**
In a vslib build:
root@sonic:/home/admin# show gearbox interfaces status
PHY Id Interface MAC Lanes MAC Lane Speed PHY Lanes PHY Lane Speed Line Lanes Line Lane Speed Oper Admin
-------- ----------- --------------- ---------------- --------------- ---------------- ------------ ----------------- ------ -------
1 Ethernet48 121,122,123,124 25G 200,201,202,203 25G 204,205 50G down down
1 Ethernet49 125,126,127,128 25G 206,207,208,209 25G 210,211 50G down down
1 Ethernet50 69,70,71,72 25G 212,213,214,215 25G 216 100G down down
In addition, docker ps | grep phy should show a physyncd docker running.
Signed-off-by: syd.logan@broadcom.com
redis-py 3.0 used in master branch only accepts user data as bytes,
strings or numbers (ints, longs and floats). Attempting to specify a key
or a value as any other type will raise a DataError exception.
This PR address the issue bt converting datetime to str
We want to let Monit to unmonitor the processes in containers which are disabled in `FEATURE` table such that
Monit will not generate false alerting messages into the syslog.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
buffer_default_*.j2 because of which internal cable length never gets
define and cause failure in test case test_multinpu_cfggen.py
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
Co-authored-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
* Enhanced Feature Table state enable/disbale for multi-asic platforms.
In Multi-asic for some features we can service per asic so we need to
get list of all services.
Also updated logic to return if any one of systemctl command return failure
and make sure syslog of feature getting enable/disable only come when
all commads are sucessful.
Moved the service list get api from sonic-util to sonic-py-common
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
* Make sure to retun None for both service list in case of error.
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
* Return empty list as fail condition
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
* Address Review Comments.
Made init_cfg.json.j2 knowledegable of Feature
service is global scope or per asic scope
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
* Fix merge conflict
* Address Review Comment.
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
Co-authored-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
for ipv6 communication between container and host in multi-asic
platforms. Address is assign is private address space of fd::/80
with prefix len selected as 80 so that last 48 bits can be
container mac address and and you prevent NDP neighbor cache
invalidation issues in the Docker layer.
Ref: https://docs.docker.com/config/daemon/ipv6/
Ref:https://medium.com/@skleeschulte/how-to-enable-ipv6-for-docker-containers-on-ubuntu-18-04-c68394a219a2
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
Co-authored-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
To fix the following error when running
`logrotate /etc/logrotate.conf` :
```
error: dpkg:10 duplicate log entry for /var/log/alternatives.log
error: found error in file dpkg, skipping
```
update-alternatives is provided with dedicated logrotate config in newer dpkg package versions (probably starting from buster)
Signed-off-by: Volodymyr Boyko <volodymyrx.boiko@intel.com>
We are moving toward building all Python packages for SONiC as wheel packages rather than Debian packages. This will also allow us to more easily transition to Python 3.
Python files are now packaged in "sonic-utilities" Pyhton wheel. Data files are now packaged in "sonic-utilities-data" Debian package.
**- How I did it**
- Build and install sonic-utilities as a Python package
- Remove explicit installation of wheel dependencies, as these will now get installed implicitly by pip when installing sonic-utilities as a wheel
- Build and install new sonic-utilities-data package to install data files required by sonic-utilities applications
- Update all references to sonic-utilities scripts/entrypoints to either reference the new /usr/local/bin/ location or remove absolute path entirely where applicable
Submodule updates:
* src/sonic-utilities aa27dd9...2244d7b (5):
> Support building sonic-utilities as a Python wheel package instead of a Debian package (#1122)
> [consutil] Display remote device name in show command (#1120)
> [vrf] fix check state_db error when vrf moving (#1119)
> [consutil] Fix issue where the ConfigDBConnector's reference is missing (#1117)
> Update to make config load/reload backward compatible. (#1115)
* src/sonic-ztp dd025bc...911d622 (1):
> Update paths to reflect new sonic-utilities install location, /usr/local/bin/ (#19)
This PR limited the number of calls to sonic-cfggen to one call
per iteration instead of current 3 calls per iteration.
The PR also installs jq on host for future scripts if needed.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
communication on docker eth0 ip . Without this TCP Connection to Redis
does not happen in namespace.
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
Co-authored-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
Introduced a new build parameter 'SONIC_IMAGE_VERSION' that allows build
system users to build SONiC image with a specific version string. If
'SONIC_IMAGE_VERSION' was not passed by the user, SONIC_IMAGE_VERSION will be
set to the output of functions.sh:sonic_get_version function.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
As per the VOQ HLDs, internal networking between the linecards and supervisor is required within a chassis.
Allocating 127.X/16 subnets for private communication within a chassis is a good candidate.
It doesn't require any external IP allocation as well as ensure that the traffic will not leave the chassis.
References:
https://github.com/Azure/SONiC/pull/622https://github.com/Azure/SONiC/pull/639
**- How I did it**
Changed the `interfaces.j2` file to add `127.0.0.1/16` as the `lo` ip address.
Then once the interface is up, the post-up command removes the `127.0.0.1/8` ip address.
The order in which the netmask change is made matters for `127.0.0.1` to be reachable at all times.
**- How to verify it**
```
root@sonic:~# ip address show dev lo
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/16 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
```
Co-authored-by: Baptiste Covolato <baptiste@arista.com>
- Merge chassis codebase upstream
- Add support for Otterlake supervisor
- Add support for NorthFace and Camp chassis
- Add support for Eldridge, Dragonfly and Brooks fabrics
- Add support for Clearwater2 and Clearwater2Ms linecards
- Add new arista Cli to power on/off cards
- Add new arista show Cli to inspect supervisor, chassis, fabrics and linecards
Issue: Binary ebtables config file is CPU arch dependent
Fix: Load the text config during firsttime boot and
Generate the binary persistent atomic file
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
sonic-cfggen is now using Unix Domain Socket for Redis DB. The socket
is created using root account. Subsequently, services that are started
as admin fails to start. This PR creates redis group and add admin
user to redis group. It also grants read/write access on redis.sock
for redis group members.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
[schema] Make schema header support C project (#373)
Removed DB specific get api's from Selectable class (#378)
With the change as part of #378 caclmgrd need to be updated
to use new client side Get API to access namespace.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
The pcie-check.sh script was added in https://github.com/Azure/sonic-buildimage/pull/4771, but was not given executable permission. Therefore, we would see messages like:
```
Aug 26 22:54:05.536248 sonic ERR systemd[664]: pcie-check.service: Failed to execute command: Permission denied
Aug 26 22:54:05.536386 sonic ERR systemd[664]: pcie-check.service: Failed at step EXEC spawning /usr/bin/pcie-check.sh: Permission denied
Aug 26 22:54:05.536600 sonic WARNING systemd[1]: pcie-check.service: Failed with result 'exit-code'.
```
management framework provides management plane services like rest and
CLI which is not needed right after boot, instead by delaying this
service we give some more CPU for data plane and control plane services
on fast/warm boot.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
New attribute 'has_timer' introduced to init_cfg.json does not evaluate
as Bool, rather it evaluates as string. This PR fixes this issue. Also,
this PR fixes an issue when there is system config unit (snmp, telemetry) that
has no installation config (WantedBy=, RequiredBy=, Also=, Alias=) settings
in the [Install] section. In the latter case, the .service should not be enabled.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
Add a master switch so that the sync/async mode can be configured.
Example usage of the switch:
1. Configure mode while building an image
`make ENABLE_SYNCHRONOUS_MODE=y <target>`
2. Configure when the device is running
Change CONFIG_DB with `sonic-cfggen -a '{"DEVICE_METADATA":{"localhost": {"synchronous_mode": "enable"}}}' --write-to-db`
Restart swss with `systemctl restart swss`
The first partition starting point was changed to be 1M as part of this
commit: 6ba2f97f1e. On systems that are misaligned before conversion
(partition start is the first sector), the relica partition that is
left in the first MB can cause problems in Aboot and result in corruption
of the filesystem on the new aligned partition.
Zeroing this old relica makes sure that there is nothing left of the old
partition lying around. There won't be any risk of having Aboot corrupt
the new filesystem because of the old relica.
Signed-off-by: Baptiste Covolato <baptiste@arista.com>
- Why I did it
When SONiC is configured with the management framework and/or telemetry services, the applications running inside those containers need to access some functionality on the host system. The following is a non-exhaustive list of such functionality:
Image management
Configuration save and load
ZTP enable/disable and status
Show tech support
- How I did it
The host service is a Python process that listens for requests via D-Bus. It will then service those requests and send a response back to the requestor.
This PR only introduces the host service infrastructure. Applications that need access to the host services must add applets that will register on D-Bus endpoints to service the appropriate functionality.
- How to verify it
- Description for the changelog
Add SONiC Host Service for container to execute select commands in host
Signed-off-by: Nirenjan Krishnan <Nirenjan.Krishnan@dell.com>
Commit e484ae9dd introduced systemd .timer unit to hostcfgd.
However, when stopping service that has timer, there is possibility that
timer is not running and the service would not be stopped. This PR
address this situation by handling both .timer and .service units.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
startup when doing redis PING since database_config.json getting
generated from jinja2 template is still not ready.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Support for Control Plane ACL's for Multi-asic Platforms.
Following changes were done:
1) Moved from using blocking listen() on Config DB to the select() model
via python-swsscommon since we have to wait on event from multiple
config db's
2) Since python-swsscommon is not available on host added libswsscommon and python-swsscommon
and dependent packages in the base image (host enviroment)
3) Made iptables programmed in all namespace using ip netns exec
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Address Review Comments
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Fix Review Comments
* Fix Comments
* Added Change for Multi-asic to have iptables
rules to accept internal docker tcp/udp traffic
needed for syslog and redis-tcp connection.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Fix Review Comments
* Added more comments on logic.
* Fixed all warning/errors reported by http://pep8online.com/
other than line > 80 characters.
* Fix Comment
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Verified with swsscommon package. Fix issue for single asic platforms.
* Moved to new python package
* Address Review Comments.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Address Review Comments.
SNMP and Telemetry services are not critical to switch startup.
They also cause fast-reboot not to meet timing requirements.
In order to delay start those service are associated with systemd
timer units, however when hostcfgd initiate service start, it start
the service and not the timer. This PR fixes this issue by
starting the timer associated with systemd unit.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
Calls to sonic-cfggen is CPU expensive. This PR reduces calls to
sonic-cfggen to one call during startup when running interfaces-
config.
singed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
Removes installation of kube-proxy (117 MB) and flannel (53 MB) images from Kubernetes-enabled devices. These images are tested to be unnecessary for our use case, as we do not rely on ClusterIPs for Kubernetes Services or a CNI for pod networking.
